CS Paper Radar

Safety-Critical Bilateral Teleoperation for Omnidirectional Aerial Manipulation Using Force-Sensorless Haptic Feedback

Yubin Kim, Jinwoo Lee, Yongjun You, H. Jin Kim, Jeonghyun Byun

cs.RO ·submitted 2026-08-22 02:35 UTC · v1
published

Abstract

This paper presents a safety-critical bilateral teleoperation framework for omnidirectional aerial manipulators that integrates visual and force-sensorless haptic wrench feedback. Unlike existing approaches that either rely on onboard force/torque sensors or use model-dependent wrench estimates, which may become unreliable under model uncertainties or induce unintended feedback during free-flight, our method implements a hierarchical safety filter based on control barrier functions to avoid such limitations. The safety filter, being the key contribution, explicitly accounts for tracking errors arising from physical interaction between the aerial manipulator and its surroundings while enforcing thrust limits, a factor overlooked despite its critical importance for flight safety. This safety filter adjusts the command from the operator to ensure safe and stable aerial manipulation and avoid motor saturation. The adjustment made by the filter is mapped to haptic feedback, which is intuitive to the operator and conveys information on physical interaction and impending motor saturation. By actual experiments with a hexarotor-based omnidirectional aerial manipulator, we demonstrate that the proposed method avoids haptic feedback during free-flight, provides directionally consistent feedback under physical interaction, and can be operated for diverse manipulative tasks. Moreover, an ablation study further shows that the saturation filter improves interaction stability by explicitly preventing motor saturation and informing the operator of corrective actions.

Comment
8 pages, 10 figures. Accepted to the 2026 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2026)

Closest papers

Nearest neighbours by meaning across the whole index.

Shared-Control Teleoperation of Omnidirectional Aerial Robots for Continuous Valve Rotation

cs.RO ·2026-10-10 ·Jinjie Li, Yicheng Chen, Haokun Liu, Moju Zhao
published similarity 0.69
Abstract · 3 pages, 2 figures. Accepted to IROS 2025 Workshop on Advancements in Aerial Physical Interaction. Best Paper Award Candidate

Omnidirectional aerial robots offer full 6-DoF independent control over position and orientation, making them popular for aerial manipulation. Although there have been advancements in robotic autonomy, human operation remains essential in complex aerial environments. Previously, we proposed an aerial teleoperation system that brings the rotational flexibility of human hands into the unbounded aerial workspace, which was evaluated through a vertically mounted valve-turning task. However, due to the limited range of human forearm's motion, the robot could not continuously rotate the valve, hindering its application in industry. In this work, we propose an approach to initiate continuous rotation when the forearm angle exceeds a threshold. This switch of control authority exemplifies the concept shared control from human-robot interaction, marking a further step in aerial teleoperation.

0.25

AeRSoM: An Aerial Rigid-Soft Integrated Manipulator for Contact-Rich Manipulation

cs.RO ·2026-09-22 ·Jiacheng Liang, Hang Zhong, Yaonan Wang, Ge Chen, Zhixing Zhang +3 more
similarity 0.68
Abstract

Contact-rich aerial manipulation remains fundamentally challenging because interaction forces are directly transmitted to the aerial platform, often leading to instability and degraded task performance. While compliant manipulators can mitigate these effects, existing aerial manipulation systems typically struggle to reconcile interaction compliance with manipulation precision. To this end, this article presents an aerial rigid-soft integrated manipulator (AeRSoM) robot that realizes embodied compliance for aerial manipulation. The proposed system integrates a fully actuated aerial platform, a rigid-soft manipulator, and variable-stiffness regulation to simultaneously achieve stable flight, compliant interaction, and precise manipulation. By distributing compliance throughout the manipulation system, the proposed design leverages distributed embodied compliance to passively absorb contact disturbances while preserving sufficient stiffness for task execution. To fully exploit the mechanical design, a composite control framework is developed for precise end-effector trajectory tracking in the presence of uncertainties and external disturbances. Extensive real-world experiments are conducted in representative contact-rich aerial manipulation tasks, including dynamic transmission-line grasping, physical interaction with a wind turbine blade, peg-in-hole, and screwing operations. The results demonstrate that the proposed rigid-soft integration significantly improves interaction robustness and task adaptability while maintaining manipulation accuracy, highlighting that embodied compliance provides a promising design paradigm for enhancing the safety, robustness, and versatility of aerial manipulation.

0.20

Effector-Centric NMPC of Tiltable-Multirotors for Offset-Free Omnidirectional Aerial Manipulation

cs.RO ·2026-08-18 ·Jinjie Li, Yicheng Chen, Johannes Kübel, Haokun Liu, Junichiro Sugihara +1 more
top venue similarity 0.66
Abstract · 22 pages, 26 figures. Accepted to IEEE Transactions on Robotics (T-RO). This arXiv version includes a two-page appendix with additional impl…

Aerial manipulation extends robotic operations to previously inaccessible aerial environments. Unlike arm-equipped aerial systems, tiltable-multirotors can directly generate six-degree-of-freedom wrenches through their flight bases, enabling both efficient movement and omnidirectional operation by tilting the thrust direction. This work presents a design analysis and a wrench-based control framework for tiltable-multirotors in aerial manipulation. We show that a four-rotor tiltable configuration provides a balance between interference-free propeller sizing and hovering efficiency across different attitudes, and its null-space redundancy is crucial for traversing singular configurations under physical constraints. We further show that an upward end-effector placement yields a favorable trade-off between geometric clearance and available wrench. To address disturbances, we propose a dual strategy consisting of a modified integral term for model error and an acceleration-based estimator for external wrenches. Building on these insights, we develop an effector-centric nonlinear model predictive control (NMPC) framework that integrates design choices, singularity handling, and disturbance compensation into a unified formulation. The proposed framework runs fully onboard at 100 Hz on a custom-built tiltable-quadrotor. Real-world experiments, including a 90-deg step cartwheel rotation, whiteboard pushing, and continuous 360-deg valve turning, demonstrate the feasibility of wrench-based omnidirectional manipulation with singularity traversal on a one-DoF-per-arm tiltable-quadrotor.

0.51

CAPTURER: A Dexterous Aerial Manipulator for Dynamic and Precise Grasping across Diverse Environments

cs.RO ·2026-10-29 ·Meng Wang, Jindou Jia, Sicheng Zhou, Zeshuai Chen, Kexin Guo +2 more
similarity 0.66
Abstract

As a representative form of embodied robotic interaction, aerial grasping requires close coordination between the aerial platform and manipulator. Most existing systems perform aerial grasping with static or slowly moving targets under fixed scenarios. Dynamic and precise grasping across different conditions introduces additional challenges, including target motion, localization drift, dynamic coupling, and external disturbances. In this work, we present CAPTURER, a dexterous aerial manipulator for centimeter-level grasping across diverse environments. To achieve the challenging goal, we first develop an onboard perception system for state estimation and target detection. Drift correction and global pose transformation are introduced to improve target localization during flight. A cooperative motion planner is proposed to coordinate the mobility of the aerial platform with the dexterity of the manipulator according to the relative target state. To maintain grasping accuracy under disturbances, we design a disturbance-rejection controller to compensate for dynamic coupling, model uncertainty, and external disturbances. The capability of CAPTURER is validated through indoor and outdoor experiments with both static and moving targets. The results demonstrate that CAPTURER achieves centimeter-level grasping accuracy for a marker pen measuring only 1.5 cm in diameter at flight speeds exceeding 1.5 m/s.

0.24

Safety-Critical Quadrotor Navigation Using Fourth-Order Control Barrier Functions with Full Nonlinear Quadrotor Dynamics

cs.RO ·2026-10-10 ·Yanze Liu, Yaşar İdikut, Dhruv Madhusudan Agrawal, Wei Xiao, Guanrui Li
similarity 0.65
Abstract

Safety-critical quadrotor navigation in cluttered environments typically relies on hierarchical architectures in which a high-level safety filter modifies position references that are then tracked by a separate attitude controller. However, this separation can create a mismatch between translational safety objectives and attitude evolution. To address this gap, we propose a safety controller based on fourth-order control barrier functions (CBFs) that explicitly incorporates the full nonlinear quadrotor dynamics, including attitude dynamics and torque-level actuation. Furthermore, we apply the integral high-order CBF technique to resolve the mixed-relative degree issue in the derived constraint formulation. The resulting formulation enforces obstacle-avoidance constraints while optimizing control torques, granting the safety layer direct authority over attitude behavior and eliminating the hierarchical disconnect inherent in reference-tracking safety filters. We validate the approaches in both high-fidelity simulation and real-world flight experiments, demonstrating reliable constraint satisfaction and successful obstacle avoidance. These results suggest that torque-level high-order CBFs provide a practical pathway to provably safer quadrotor navigation under full rigid-body dynamics.

0.12

AM-Bench: A Modular Simulation Suite and Benchmark for Aerial Manipulation Policy Learning

cs.RO ·2026-09-01 ·Yutong Wang, Dongjae Lee, Xiaofeng Guo, Yuanzhu Zhan, Yufei Jiang +7 more
benchmarkhighly cited similarity 0.64
Abstract · 28 pages, 7 figures, 15 tables

Standardized benchmarks have played a central role in advancing robot manipulation learning, yet most focus on ground-supported manipulation systems, which limits their applicability to dynamics-critical domains such as aerial manipulation (AM). AM presents distinct system-level challenges, including environmental disturbances, coupled dynamics between the manipulator and floating base, and constrained degrees of freedom. Consequently, task performance depends jointly on robot embodiment, low-level control, and high-level policy design. We introduce AM-Bench, a modular simulation suite and benchmark for multirotor-based AM policy learning. AM-Bench includes representative embodiments spanning underactuated, fully actuated, and overactuated systems, 12 tasks across contact, transport, and constrained interaction, configurable aerodynamic disturbances and actuator saturation, standard low-level controllers, and baseline policy-learning algorithms. Unlike prior manipulation benchmarks that primarily emphasize end-to-end policy performance, AM-Bench enables system-level evaluation of how embodiment, control, disturbances, and policy choices interact. We demonstrate its diagnostic value through three simulation studies spanning high-level policies, policy--control interfaces, and embodiments, together with real-world validation of modeled effects and a hardware test of the learning pipeline.

0.47

Observer-Based Robust Control for an Aerial Manipulator System under Unknown External Disturbances

eess.SY ·2026-09-07 ·Mayank Pandey, Sneha Gajbhiye
similarity 0.64
Abstract

This paper addresses the mathematical modeling and control of an aerial manipulator system comprising a quadrotor as the uncrewed aerial vehicle and a robotic arm as the manipulator. The dynamic model is established by identifying the overall center-of-mass velocity and the system's orientation as constraints, yielding a simplified, two-decoupled subsystems: a locked (overall translation) subsystem and a shape-space (actuation or overall rotation) subsystem, both subjected to external disturbances. Since the system is mechanically coupled, a critical challenge arises where constant bounded disturbances in the first subsystem manifest as time-varying, state-dependent disturbances in the second subsystem. Given that the quadrotor is inherently unstable, the movement of the robotic manipulator (RM) during flight can further jeopardize the stability of the entire QRM system if these disturbances and coupling effects are not effectively managed. To address this, we present a continuous nonlinear disturbance observer-based feedback control law, which enables the independent control of each subsystem while systematically eliminating cross-coupling effects. The efficacy of the proposed controller is validated through multiple simulations emulating practical operating conditions, thereby substantiating its real-world applicability and highlighting the core contributions of this work.

0.11

A Switched Adaptive Control Framework for Aerial Manipulators Under Dynamic Transitions

cs.RO ·2026-09-21 ·Rishabh Dev Yadav, Saksham Gupta, Amitabh Sharma, Sarthak Mishra, Wei Pan +2 more
top venue similarity 0.64
Abstract

Aerial manipulators represent the forefront of aerial robotics. Although potentially capable of complex interaction tasks, controlling aerial manipulators throughout the dynamic transitions occurring during task execution presents significant challenges. Abrupt or discontinuous changes in system dynamics generated by the transitions suggest the use of a switched approach, yet the available aerial manipulation methods are not designed for coping with switched regimes. In addition, most available methods fall short in coping with the tight couplings between the aerial vehicle and the manipulator, as well as in coping with the state-dependent uncertainties arising from the difficulty in modeling such couplings. We propose a switched-based adaptive control framework for aerial manipulators not relying on a priori knowledge of the vehicle-manipulator couplings and of state-dependent uncertainties. To guarantee stable manipulation despite changes in system dynamics, the framework provides a class of switching signals characterizing those transition phases for which the system is guaranteed to remain stable. Comparative experiments further validate the effectiveness of the proposed switched-based framework over the state of the art.

0.59