CS Paper Radar

Shared-Control Teleoperation of Omnidirectional Aerial Robots for Continuous Valve Rotation

Jinjie Li, Yicheng Chen, Haokun Liu, Moju Zhao

cs.RO ·submitted 2026-10-10 02:22 UTC · v1
published

Abstract

Omnidirectional aerial robots offer full 6-DoF independent control over position and orientation, making them popular for aerial manipulation. Although there have been advancements in robotic autonomy, human operation remains essential in complex aerial environments. Previously, we proposed an aerial teleoperation system that brings the rotational flexibility of human hands into the unbounded aerial workspace, which was evaluated through a vertically mounted valve-turning task. However, due to the limited range of human forearm's motion, the robot could not continuously rotate the valve, hindering its application in industry. In this work, we propose an approach to initiate continuous rotation when the forearm angle exceeds a threshold. This switch of control authority exemplifies the concept shared control from human-robot interaction, marking a further step in aerial teleoperation.

Comment
3 pages, 2 figures. Accepted to IROS 2025 Workshop on Advancements in Aerial Physical Interaction. Best Paper Award Candidate

Closest papers

Nearest neighbours by meaning across the whole index.

Safety-Critical Bilateral Teleoperation for Omnidirectional Aerial Manipulation Using Force-Sensorless Haptic Feedback

cs.RO ·2026-08-22 ·Yubin Kim, Jinwoo Lee, Yongjun You, H. Jin Kim, Jeonghyun Byun
published similarity 0.69
Abstract · 8 pages, 10 figures. Accepted to the 2026 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2026)

This paper presents a safety-critical bilateral teleoperation framework for omnidirectional aerial manipulators that integrates visual and force-sensorless haptic wrench feedback. Unlike existing approaches that either rely on onboard force/torque sensors or use model-dependent wrench estimates, which may become unreliable under model uncertainties or induce unintended feedback during free-flight, our method implements a hierarchical safety filter based on control barrier functions to avoid such limitations. The safety filter, being the key contribution, explicitly accounts for tracking errors arising from physical interaction between the aerial manipulator and its surroundings while enforcing thrust limits, a factor overlooked despite its critical importance for flight safety. This safety filter adjusts the command from the operator to ensure safe and stable aerial manipulation and avoid motor saturation. The adjustment made by the filter is mapped to haptic feedback, which is intuitive to the operator and conveys information on physical interaction and impending motor saturation. By actual experiments with a hexarotor-based omnidirectional aerial manipulator, we demonstrate that the proposed method avoids haptic feedback during free-flight, provides directionally consistent feedback under physical interaction, and can be operated for diverse manipulative tasks. Moreover, an ablation study further shows that the saturation filter improves interaction stability by explicitly preventing motor saturation and informing the operator of corrective actions.

0.37

FAM-DQ: A Dual-Quadrotor-Based Fully Actuated Aerial Manipulator for High-Torque Interaction

cs.RO ·2026-08-13 ·Xuwei Yang, Ruoyu Ren, Ziqian Guo
similarity 0.64
Abstract · 7 pages, 7 figures

Aerial physical interaction requires aerial manipulation platforms to generate large interaction forces and torques while maintaining precise end-effector control. However, conventional underactuated aerial manipulators suffer from strong position-attitude coupling, whereas fully actuated platform designs often face structural complexity, limited payload capacity, and insufficient torque output. This paper presents FAM-DQ, a dual-quadrotor based fully actuated aerial manipulator designed for high-torque physical interaction tasks. By mounting two quadrotor propulsion modules at the ends of a central frame through passive joints, while using a gear-driven servo to regulate the pointing direction, FAM-DQ achieves decoupled $6$-DoF end-effector control with omnidirectional manipulation capability and enhanced torque output. Experiments including trajectory tracking, attitude tracking, static torque measurement, and screw driving validate the proposed design. FAM-DQ achieves a maximum torque of $1.019~\mathrm{N}\cdot\mathrm{m}$ with a total mass of $0.447~\mathrm{kg}$, corresponding to a torque-to-mass ratio of $2.28~\mathrm{N}\cdot\mathrm{m/kg}$.

0.07

AeRSoM: An Aerial Rigid-Soft Integrated Manipulator for Contact-Rich Manipulation

cs.RO ·2026-09-22 ·Jiacheng Liang, Hang Zhong, Yaonan Wang, Ge Chen, Zhixing Zhang +3 more
similarity 0.60
Abstract

Contact-rich aerial manipulation remains fundamentally challenging because interaction forces are directly transmitted to the aerial platform, often leading to instability and degraded task performance. While compliant manipulators can mitigate these effects, existing aerial manipulation systems typically struggle to reconcile interaction compliance with manipulation precision. To this end, this article presents an aerial rigid-soft integrated manipulator (AeRSoM) robot that realizes embodied compliance for aerial manipulation. The proposed system integrates a fully actuated aerial platform, a rigid-soft manipulator, and variable-stiffness regulation to simultaneously achieve stable flight, compliant interaction, and precise manipulation. By distributing compliance throughout the manipulation system, the proposed design leverages distributed embodied compliance to passively absorb contact disturbances while preserving sufficient stiffness for task execution. To fully exploit the mechanical design, a composite control framework is developed for precise end-effector trajectory tracking in the presence of uncertainties and external disturbances. Extensive real-world experiments are conducted in representative contact-rich aerial manipulation tasks, including dynamic transmission-line grasping, physical interaction with a wind turbine blade, peg-in-hole, and screwing operations. The results demonstrate that the proposed rigid-soft integration significantly improves interaction robustness and task adaptability while maintaining manipulation accuracy, highlighting that embodied compliance provides a promising design paradigm for enhancing the safety, robustness, and versatility of aerial manipulation.

0.20

Aerial Layouting: Design and Control of a Compliant and Actuated End-Effector for Precise In-flight Marking on Ceilings

cs.RO ·2026-08-11 ·Christian Lanegger, Marco Ruggia, Marco Tognon, Lionel Ott, Roland Siegwart
publishedhighly cited similarity 0.60
Abstract · C. Lanegger and M. Ruggia contributed equally. Accepted to Robotics: Science and Systems (RSS) 2022

Aerial robots have demonstrated impressive feats of precise control, such as dynamic flight through openings or highly complex choreographies. Despite the accuracy needed for these tasks, there are problems that require levels of precision that are challenging to achieve today. One such problem is aerial interaction. Advances in aerial robot design and control have made such contact-based tasks possible and opened up research into challenging real-world tasks, including contact-based inspection. However, while centimetre accuracy is sufficient and achievable for inspection tasks, the positioning accuracy needed for other problems, such as layouting on construction sites or general push-and-slide tasks, is millimetres. To achieve such a high precision, we propose a new aerial system composed of an aerial vehicle equipped with a novel "smart" end-effector leveraging a stability-optimized Gough-Stewart mechanism. We present its design process and features incorporating the principles of compliance, multiple contact points, actuation, and self-containment. In experiments, we verify that the design choices made for our novel end-effector are necessary to obtain the desired positioning precision. Furthermore, we demonstrate that we can reliably mark lines on ceilings with millimetre accuracy without the need for precise modeling or sophisticated control of the aerial robot.

0.61

QuadHand: A Compact Quadrotor Aerial Manipulator with MRC-SDF-Based Whole-Body Motion Planning

cs.RO ·2026-09-28 ·Rui Jin, Ruiyang Liu, Xinhang Xu, Haotian Jin, Yi Wang +2 more
highly cited similarity 0.60
Abstract

Uncrewed aerial manipulators (UAMs) integrate robotic arms with aerial platforms for three-dimensional physical interaction. However, enlarging the workspace increases arm-induced disturbances, while existing geometric representations face a trade-off between geometric fidelity and computational efficiency in close-proximity interaction. This paper presents QuadHand, a compact quadrotor aerial manipulator with a 3-DoF arm, gripper, and battery-assisted passive CoG compensation module to reduce dominant arm-induced disturbances. We further propose MRC-SDF, a Multi-articulated Robot-Centric Signed Distance Field that preserves fine geometric detail with tractable computation, and a spatiotemporal whole-body trajectory optimization framework that jointly optimizes the quadrotor and manipulator for safe and executable trajectory generation. Simulations and real-world experiments demonstrate safe and executable aerial manipulation in complex environments.

0.36

A Switched Adaptive Control Framework for Aerial Manipulators Under Dynamic Transitions

cs.RO ·2026-09-21 ·Rishabh Dev Yadav, Saksham Gupta, Amitabh Sharma, Sarthak Mishra, Wei Pan +2 more
top venue similarity 0.59
Abstract

Aerial manipulators represent the forefront of aerial robotics. Although potentially capable of complex interaction tasks, controlling aerial manipulators throughout the dynamic transitions occurring during task execution presents significant challenges. Abrupt or discontinuous changes in system dynamics generated by the transitions suggest the use of a switched approach, yet the available aerial manipulation methods are not designed for coping with switched regimes. In addition, most available methods fall short in coping with the tight couplings between the aerial vehicle and the manipulator, as well as in coping with the state-dependent uncertainties arising from the difficulty in modeling such couplings. We propose a switched-based adaptive control framework for aerial manipulators not relying on a priori knowledge of the vehicle-manipulator couplings and of state-dependent uncertainties. To guarantee stable manipulation despite changes in system dynamics, the framework provides a class of switching signals characterizing those transition phases for which the system is guaranteed to remain stable. Comparative experiments further validate the effectiveness of the proposed switched-based framework over the state of the art.

0.59

Understanding Whole-Body Robot Teleoperation Strategies Under Diverse Task Objectives and Constraints

cs.RO ·2026-09-11 ·Tsung-Chi Lin, Juo-Tung Chen, Chien-Ming Huang
similarity 0.59
Abstract

This work investigates the control strategies of complex whole-body robot teleoperation that coordinate active perception, bimanual manipulation, and navigation. We developed a hybrid control framework, combining the free-form and constrained control, for the whole-body teleoperation of the TIAGo mobile manipulator. We conducted a user study to explore people's control strategies under different task constraints such as limited time and low tolerance of errors. Our results highlight the effective use of coordinated control in improving task efficiency and reducing the risk of reaching individual joint limits. We discuss our results and their implications for designing future whole-body robot teleoperation systems.

0.15

Robust Sliding Mode and Admittance Control of Underactuated Aerial Manipulators for Contact-Based Inspection

cs.RO ·2026-08-11 ·Tareq Aziz Alqutami, Yvan Petillot, Matthew W. Dunnigan, Mustafa Suphi Erden
published similarity 0.58
Abstract · 6 pages, 7 figures, submitted to 2026 IEEE Industrial Electronics and Applications Conference (IEACon)

Contact-based industrial inspection requires aerial platforms to maintain stable interaction while rejecting disturbances. Underactuated aerial manipulators present control challenges due to the dynamic coupling between vehicle attitude and force generation. This paper proposes a robust control framework for an underactuated hexarotor equipped with a 1-DoF manipulator to perform sustained contact inspection. The architecture integrates integral-augmented Sliding Mode Control (SMC) for trajectory tracking with an admittance control law for force regulation. The contact force is mapped to a feedforward attitude term, while the 1-DoF arm actively compensates for the tilt to maintain surface alignment. Software-in-the-loop simulations demonstrate that the SMC-based approach achieves superior tracking and coupling rejection compared to traditional PID. Furthermore, the interaction strategy achieved precise force regulation with an RMSE of 0.12N and was able to stably exert up to 20N force, confirming the system's efficacy for stable, reliable contact-based inspection.

0.26