CS Paper Radar

CAPTURER: A Dexterous Aerial Manipulator for Dynamic and Precise Grasping across Diverse Environments

Meng Wang, Jindou Jia, Sicheng Zhou, Zeshuai Chen, Kexin Guo, Xiang Yu, Lei Guo

cs.RO ·submitted 2026-10-29 01:05 UTC · v1

Abstract

As a representative form of embodied robotic interaction, aerial grasping requires close coordination between the aerial platform and manipulator. Most existing systems perform aerial grasping with static or slowly moving targets under fixed scenarios. Dynamic and precise grasping across different conditions introduces additional challenges, including target motion, localization drift, dynamic coupling, and external disturbances. In this work, we present CAPTURER, a dexterous aerial manipulator for centimeter-level grasping across diverse environments. To achieve the challenging goal, we first develop an onboard perception system for state estimation and target detection. Drift correction and global pose transformation are introduced to improve target localization during flight. A cooperative motion planner is proposed to coordinate the mobility of the aerial platform with the dexterity of the manipulator according to the relative target state. To maintain grasping accuracy under disturbances, we design a disturbance-rejection controller to compensate for dynamic coupling, model uncertainty, and external disturbances. The capability of CAPTURER is validated through indoor and outdoor experiments with both static and moving targets. The results demonstrate that CAPTURER achieves centimeter-level grasping accuracy for a marker pen measuring only 1.5 cm in diameter at flight speeds exceeding 1.5 m/s.

Closest papers

Nearest neighbours by meaning across the whole index.

Aerial Manipulation in the Wild with Onboard Perception, Policy Learning, and Whole-Body Control

cs.RO ·2026-09-24 ·Yuanzhu Zhan, Yufei Jiang, Zemu Zhang, Junyi Geng
published similarity 0.72
Abstract · 5 pages, 4 figures. Accepted by 5th Workshop on Mobile Manipulation and Embodied Intelligence (MoMA.v5) at IROS 2026

Aerial manipulation in outdoor environments remains challenging due to the simultaneous requirements of reliable state estimation, stable aerial motion, and precise manipulation under external disturbances. In this work, we present a real-world outdoor aerial manipulation framework that integrates imitation learning, onboard LiDAR-inertial state estimation, and whole-body model predictive control. A Diffusion Policy is trained from manipulation demonstrations to generate desired end-effector motions from onboard observations. These learned commands are executed by a whole-body MPC that jointly coordinates the aerial platform and manipulator to realize the desired end-effector trajectory. To eliminate reliance on external motion-capture infrastructure, the platform employs onboard LiDAR-inertial odometry for state estimation during outdoor operation. We validate the complete framework on a physical aerial manipulator and demonstrate successful execution of outdoor manipulation tasks. The experimental results show that demonstration-driven manipulation policies can be effectively integrated with onboard state estimation and model-based whole-body control to enable aerial manipulation beyond controlled indoor environments.

0.28

AeRSoM: An Aerial Rigid-Soft Integrated Manipulator for Contact-Rich Manipulation

cs.RO ·2026-09-22 ·Jiacheng Liang, Hang Zhong, Yaonan Wang, Ge Chen, Zhixing Zhang +3 more
similarity 0.69
Abstract

Contact-rich aerial manipulation remains fundamentally challenging because interaction forces are directly transmitted to the aerial platform, often leading to instability and degraded task performance. While compliant manipulators can mitigate these effects, existing aerial manipulation systems typically struggle to reconcile interaction compliance with manipulation precision. To this end, this article presents an aerial rigid-soft integrated manipulator (AeRSoM) robot that realizes embodied compliance for aerial manipulation. The proposed system integrates a fully actuated aerial platform, a rigid-soft manipulator, and variable-stiffness regulation to simultaneously achieve stable flight, compliant interaction, and precise manipulation. By distributing compliance throughout the manipulation system, the proposed design leverages distributed embodied compliance to passively absorb contact disturbances while preserving sufficient stiffness for task execution. To fully exploit the mechanical design, a composite control framework is developed for precise end-effector trajectory tracking in the presence of uncertainties and external disturbances. Extensive real-world experiments are conducted in representative contact-rich aerial manipulation tasks, including dynamic transmission-line grasping, physical interaction with a wind turbine blade, peg-in-hole, and screwing operations. The results demonstrate that the proposed rigid-soft integration significantly improves interaction robustness and task adaptability while maintaining manipulation accuracy, highlighting that embodied compliance provides a promising design paradigm for enhancing the safety, robustness, and versatility of aerial manipulation.

0.20

QuadHand: A Compact Quadrotor Aerial Manipulator with MRC-SDF-Based Whole-Body Motion Planning

cs.RO ·2026-09-28 ·Rui Jin, Ruiyang Liu, Xinhang Xu, Haotian Jin, Yi Wang +2 more
highly cited similarity 0.69
Abstract

Uncrewed aerial manipulators (UAMs) integrate robotic arms with aerial platforms for three-dimensional physical interaction. However, enlarging the workspace increases arm-induced disturbances, while existing geometric representations face a trade-off between geometric fidelity and computational efficiency in close-proximity interaction. This paper presents QuadHand, a compact quadrotor aerial manipulator with a 3-DoF arm, gripper, and battery-assisted passive CoG compensation module to reduce dominant arm-induced disturbances. We further propose MRC-SDF, a Multi-articulated Robot-Centric Signed Distance Field that preserves fine geometric detail with tractable computation, and a spatiotemporal whole-body trajectory optimization framework that jointly optimizes the quadrotor and manipulator for safe and executable trajectory generation. Simulations and real-world experiments demonstrate safe and executable aerial manipulation in complex environments.

0.36

Observer-Based Robust Control for an Aerial Manipulator System under Unknown External Disturbances

eess.SY ·2026-09-07 ·Mayank Pandey, Sneha Gajbhiye
similarity 0.67
Abstract

This paper addresses the mathematical modeling and control of an aerial manipulator system comprising a quadrotor as the uncrewed aerial vehicle and a robotic arm as the manipulator. The dynamic model is established by identifying the overall center-of-mass velocity and the system's orientation as constraints, yielding a simplified, two-decoupled subsystems: a locked (overall translation) subsystem and a shape-space (actuation or overall rotation) subsystem, both subjected to external disturbances. Since the system is mechanically coupled, a critical challenge arises where constant bounded disturbances in the first subsystem manifest as time-varying, state-dependent disturbances in the second subsystem. Given that the quadrotor is inherently unstable, the movement of the robotic manipulator (RM) during flight can further jeopardize the stability of the entire QRM system if these disturbances and coupling effects are not effectively managed. To address this, we present a continuous nonlinear disturbance observer-based feedback control law, which enables the independent control of each subsystem while systematically eliminating cross-coupling effects. The efficacy of the proposed controller is validated through multiple simulations emulating practical operating conditions, thereby substantiating its real-world applicability and highlighting the core contributions of this work.

0.11

Safety-Critical Bilateral Teleoperation for Omnidirectional Aerial Manipulation Using Force-Sensorless Haptic Feedback

cs.RO ·2026-08-22 ·Yubin Kim, Jinwoo Lee, Yongjun You, H. Jin Kim, Jeonghyun Byun
published similarity 0.66
Abstract · 8 pages, 10 figures. Accepted to the 2026 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2026)

This paper presents a safety-critical bilateral teleoperation framework for omnidirectional aerial manipulators that integrates visual and force-sensorless haptic wrench feedback. Unlike existing approaches that either rely on onboard force/torque sensors or use model-dependent wrench estimates, which may become unreliable under model uncertainties or induce unintended feedback during free-flight, our method implements a hierarchical safety filter based on control barrier functions to avoid such limitations. The safety filter, being the key contribution, explicitly accounts for tracking errors arising from physical interaction between the aerial manipulator and its surroundings while enforcing thrust limits, a factor overlooked despite its critical importance for flight safety. This safety filter adjusts the command from the operator to ensure safe and stable aerial manipulation and avoid motor saturation. The adjustment made by the filter is mapped to haptic feedback, which is intuitive to the operator and conveys information on physical interaction and impending motor saturation. By actual experiments with a hexarotor-based omnidirectional aerial manipulator, we demonstrate that the proposed method avoids haptic feedback during free-flight, provides directionally consistent feedback under physical interaction, and can be operated for diverse manipulative tasks. Moreover, an ablation study further shows that the saturation filter improves interaction stability by explicitly preventing motor saturation and informing the operator of corrective actions.

0.37

Robust Active-Perception Control for Global-State-Free Aerial-Ground Cooperation

cs.RO ·2026-09-22 ·Mingxuan Zhang, Jiajun Yu, Baozhe Zhang, Pengxiang Zhou, Wentao Liu +3 more
similarity 0.66
Abstract

Aerial-ground cooperation requires real-time UAV--UGV relative-state information. Instead of maintaining global estimates for both robots, direct control in a UGV-attached non-inertial frame avoids reliance on global localization. Vision-based relative pose estimation with a passive marker offers a low-cost and effective solution. However, a fixed camera may lose sight of the moving UGV when the required UAV attitude conflicts with the field-of-view (FOV) constraint. To address this, we propose COPA, a robust active-perception framework for global-state-free aerial-ground cooperation. We use a single-axis gimbal to decouple the camera optical axis from the UAV pitch attitude. We derive an active-perception model that relates UAV motion, gimbal angle, and UGV motion to the target image-plane state.A Temporal Convolutional Network (TCN) predicts short-horizon UGV acceleration and angular velocity from recent motion history without global-state measurements. The model predictive control (MPC) uses these predictions to jointly optimize UAV and gimbal control. Simulations show that COPA maintains continuous target visibility, while ablation studies confirm that the TCN reduces peak errors during UGV motion transitions. Real-world experiments with UGV accelerations up to 3m/s^2 and yaw rates up to 1.0rad/s demonstrate robust tracking.

0.15

MAVP: Map-Aware Visuomotor Policies for Mobile Manipulation

cs.RO cs.AIcs.CVcs.LG ·2026-09-22 ·Jinhe Tang, Ruixiao Dai, Weiming Zhi
similarity 0.65
Abstract

Successful mobile manipulation requires coordinated base and arm motion while maintaining accurate spatial positioning. However, demonstration-trained policies can struggle to realise the intended base motion reliably, leading to spatial misalignment and subsequent manipulation failures. We present MAVP (Map-Aware Visuomotor Policies), a framework that improves execution reliability by predicting explicit base-pose targets and tracking them using localisation feedback. MAVP reconstructs a static map from teleoperated demonstrations and expresses demonstrated base trajectories in a shared map frame, providing consistent spatial supervision across demonstrations. At execution time, the policy receives RGB observations, joint states, and the robot's current map-frame base pose, and jointly predicts target base poses, arm actions, and gripper actions. A low-level controller tracks the predicted base targets using feedforward motion and pose error feedback, enabling correction of execution deviations. We additionally use pose-noise augmentation during training to improve robustness to errors in the policy's pose input. Across six real-world manipulation tasks and three policy families, MAVP achieves higher task success rates than unanchored velocity control in all tasks. Videos and additional results are available at https://123qwedsa123.github.io/mavp/.

0.51

From Local Whole-Body VLA Behaviors to Scene-Scale Aerial Manipulation

cs.RO ·2026-09-30 ·Weixiang Guo, Rui Jin, Haotian Jin, Xinhang Xu, Ruiyang Liu +5 more
similarity 0.65
Abstract

Vision-language-action (VLA) models enable task-conditioned interaction, but extending them to scene-scale aerial manipulation remains challenging due to costly whole-body demonstrations, latency-induced action-state misalignment, and cross-site behavior composition. We present a unified framework for synthetic policy training and scene-scale execution on articulated uncrewed aerial manipulators (UAMs). A scene-reconfigurable pipeline synthesizes task-conditioned, kinodynamically feasible trajectories and synchronized multiview observations for VLA training without physical-platform demonstrations. Measured-progress-aligned realization (MPAR) aligns asynchronously returned action chunks with measured execution progress and realizes them as continuous, dynamically feasible trajectories. A relational Scene Graph grounds language goals to object instances and feasible interaction regions, while topology-guided transfer connects local behaviors across sites. Local VLA skills achieve 39/60 successes (65.0%) in simulation under oracle target and feasible-handoff conditions. Under 500-ms added latency, with and without a transient command-update stall, MPAR reduces median takeover phase error by 0.212 s over nominal-time alignment. The complete system completes 21/50 simulated multi-site missions (42.0%) and is further validated on a physical articulated UAM.

0.16