CS Paper Radar

Observer-Based Robust Control for an Aerial Manipulator System under Unknown External Disturbances

Mayank Pandey, Sneha Gajbhiye

eess.SY ·submitted 2026-09-07 06:56 UTC · v1

Abstract

This paper addresses the mathematical modeling and control of an aerial manipulator system comprising a quadrotor as the uncrewed aerial vehicle and a robotic arm as the manipulator. The dynamic model is established by identifying the overall center-of-mass velocity and the system's orientation as constraints, yielding a simplified, two-decoupled subsystems: a locked (overall translation) subsystem and a shape-space (actuation or overall rotation) subsystem, both subjected to external disturbances. Since the system is mechanically coupled, a critical challenge arises where constant bounded disturbances in the first subsystem manifest as time-varying, state-dependent disturbances in the second subsystem. Given that the quadrotor is inherently unstable, the movement of the robotic manipulator (RM) during flight can further jeopardize the stability of the entire QRM system if these disturbances and coupling effects are not effectively managed. To address this, we present a continuous nonlinear disturbance observer-based feedback control law, which enables the independent control of each subsystem while systematically eliminating cross-coupling effects. The efficacy of the proposed controller is validated through multiple simulations emulating practical operating conditions, thereby substantiating its real-world applicability and highlighting the core contributions of this work.

Closest papers

Nearest neighbours by meaning across the whole index.

Dual Path Following for an Aerial Manipulator Under State and Input Constraints via Transverse Feedback Linearization

cs.RO eess.SYmath.OC ·2026-11-01 ·Hamza Tariq, Adeel Akhtar
code/data similarity 0.72
Abstract · 8 pages, 3 Figures

This paper studies dual path following for a quadrotor carrying a three-degree-of-freedom arm. The center of mass of the combined system must follow a vehicle path and the end effector must follow a second path, while the arm respects its joint limits and avoids its singular postures. The vehicle and the arm are mechanically coupled, so one controller must handle both paths. With the center of mass and the end-effector path coordinates as outputs, and a dynamic extension of the thrust, the system admits a normal form without internal dynamics. We characterize the states where this normal form fails. We formulate the transverse feedback linearizing controller as a quadratic program that relaxes only the speed of the end effector along its path and imposes safety and actuator limits as inequality constraints. The program reduces to a scalar problem with a closed-form solution. If it remains strictly feasible for all time, the feedback is locally Lipschitz, both paths are invariant and attractive, and every constraint holds. In the physics engine Drake, the controller resolves a conflict between the two speed references by slowing the end effector while both paths remain invariant. By contrast, a cascade with a safety filter leaves both paths. Code and animations are available at https://gradslab.github.io/am_dual_pf-/

0.22

Nonlinear Control of Aerial Manipulator

eess.SY cs.RO ·2026-10-25 ·Sandesh Thapa
similarity 0.72
Abstract · 5 pages, 9 figures, 2 tables

This paper presents two controllers for a quadrotor equipped with a two-DOF robot manipulator that physically interacts with the environment. Cartesian impedance and adaptive sliding mode controllers are implemented and compared for a simple hovering task in the presence of some bounded disturbance. A full dynamic model is developed, and the two above controllers are implemented with the same initial conditions and desired position.

0.27

A Switched Adaptive Control Framework for Aerial Manipulators Under Dynamic Transitions

cs.RO ·2026-09-21 ·Rishabh Dev Yadav, Saksham Gupta, Amitabh Sharma, Sarthak Mishra, Wei Pan +2 more
top venue similarity 0.71
Abstract

Aerial manipulators represent the forefront of aerial robotics. Although potentially capable of complex interaction tasks, controlling aerial manipulators throughout the dynamic transitions occurring during task execution presents significant challenges. Abrupt or discontinuous changes in system dynamics generated by the transitions suggest the use of a switched approach, yet the available aerial manipulation methods are not designed for coping with switched regimes. In addition, most available methods fall short in coping with the tight couplings between the aerial vehicle and the manipulator, as well as in coping with the state-dependent uncertainties arising from the difficulty in modeling such couplings. We propose a switched-based adaptive control framework for aerial manipulators not relying on a priori knowledge of the vehicle-manipulator couplings and of state-dependent uncertainties. To guarantee stable manipulation despite changes in system dynamics, the framework provides a class of switching signals characterizing those transition phases for which the system is guaranteed to remain stable. Comparative experiments further validate the effectiveness of the proposed switched-based framework over the state of the art.

0.58

Selective Sliding Mode Control Enhances Robustness of Aerial Robots Under Disturbances

cs.RO eess.SY ·2026-10-28 ·Anoop Kiran, Thales C. Silva, Nora Ayanian
hot direction similarity 0.67
Abstract · 8 pages, 5 tables, 8 figures

Quadrotor control under disturbances such as wind gusts and payload variations remains challenging. First-order sliding mode control (SMC) and matched/unmatched uncertainty distinction are classical approaches; however, neither tells a practitioner which loops in a cascaded controller should be made robust to sustain disturbances, how to tune those loops, nor what the additional costs are on an embedded processor. Applying robust control uniformly across all axes addresses disturbances indiscriminately, adding tuning effort on axes where no disturbance acts. On inherently underactuated vehicles, disturbances along some axes cannot be opposed directly at all. We propose a principled methodology for deciding where robust control belongs in a cascaded architecture, with all control running onboard the vehicle. We recover the acting disturbance from PID hover flights under disturbance by inverting the equations of motion, use the recovered signal to identify and quantify the excited axes, and deploy robust control where it counts. Experiments on a Crazyflie 2.1 quadrotor under slung-payload and oblique-wind disturbances show tracking improvements concentrated on the axes the rule selects, and gain sweeps confirm that the switching gain reduces error on matched axes but has no effect on an excited unmatched axis, as the analysis predicts.

0.35

Effector-Centric NMPC of Tiltable-Multirotors for Offset-Free Omnidirectional Aerial Manipulation

cs.RO ·2026-08-18 ·Jinjie Li, Yicheng Chen, Johannes Kübel, Haokun Liu, Junichiro Sugihara +1 more
top venue similarity 0.67
Abstract · 22 pages, 26 figures. Accepted to IEEE Transactions on Robotics (T-RO). This arXiv version includes a two-page appendix with additional impl…

Aerial manipulation extends robotic operations to previously inaccessible aerial environments. Unlike arm-equipped aerial systems, tiltable-multirotors can directly generate six-degree-of-freedom wrenches through their flight bases, enabling both efficient movement and omnidirectional operation by tilting the thrust direction. This work presents a design analysis and a wrench-based control framework for tiltable-multirotors in aerial manipulation. We show that a four-rotor tiltable configuration provides a balance between interference-free propeller sizing and hovering efficiency across different attitudes, and its null-space redundancy is crucial for traversing singular configurations under physical constraints. We further show that an upward end-effector placement yields a favorable trade-off between geometric clearance and available wrench. To address disturbances, we propose a dual strategy consisting of a modified integral term for model error and an acceleration-based estimator for external wrenches. Building on these insights, we develop an effector-centric nonlinear model predictive control (NMPC) framework that integrates design choices, singularity handling, and disturbance compensation into a unified formulation. The proposed framework runs fully onboard at 100 Hz on a custom-built tiltable-quadrotor. Real-world experiments, including a 90-deg step cartwheel rotation, whiteboard pushing, and continuous 360-deg valve turning, demonstrate the feasibility of wrench-based omnidirectional manipulation with singularity traversal on a one-DoF-per-arm tiltable-quadrotor.

0.50

FAM-DQ: A Dual-Quadrotor-Based Fully Actuated Aerial Manipulator for High-Torque Interaction

cs.RO ·2026-08-13 ·Xuwei Yang, Ruoyu Ren, Ziqian Guo
similarity 0.67
Abstract · 7 pages, 7 figures

Aerial physical interaction requires aerial manipulation platforms to generate large interaction forces and torques while maintaining precise end-effector control. However, conventional underactuated aerial manipulators suffer from strong position-attitude coupling, whereas fully actuated platform designs often face structural complexity, limited payload capacity, and insufficient torque output. This paper presents FAM-DQ, a dual-quadrotor based fully actuated aerial manipulator designed for high-torque physical interaction tasks. By mounting two quadrotor propulsion modules at the ends of a central frame through passive joints, while using a gear-driven servo to regulate the pointing direction, FAM-DQ achieves decoupled $6$-DoF end-effector control with omnidirectional manipulation capability and enhanced torque output. Experiments including trajectory tracking, attitude tracking, static torque measurement, and screw driving validate the proposed design. FAM-DQ achieves a maximum torque of $1.019~\mathrm{N}\cdot\mathrm{m}$ with a total mass of $0.447~\mathrm{kg}$, corresponding to a torque-to-mass ratio of $2.28~\mathrm{N}\cdot\mathrm{m/kg}$.

0.07

Multi-quadrotor systems interconnected via structurally unknown forces and moments

cs.RO ·2026-10-31 ·Kaiyue Xing, Shivansh Pratap Singh, Sarthak Mishra, Di Liu, Spandan Roy +2 more
similarity 0.67
Abstract · 14 pages, 6 figures, 3 tables. Video available at: https://tinyurl.com/4mzpb9rf

This work addresses the challenge of controlling multi-quadrotor systems subject to tight uncertain couplings. We consider interconnection forces and moments among the quadrotors to be state-dependent functions of the coordination errors, without assuming knowledge of their functional/parametric structures, e.g., no linear-in-parameters assumptions are made. We only rely on general state-dependent quadratic bounds valid for several Euler-Lagrange mechanical systems. We propose a coordination strategy embedding adaptive laws dedicated to compensating for the lack of structural knowledge. Unlike conventional decoupled position-attitude designs, we present a coupled stability analysis accounting for the position-attitude couplings induced by the interconnection forces and moments. The analysis, along with real experiments involving cooperative aerial transportation of rope-interconnected payloads, demonstrates the effectiveness of the proposed solution in compensating for these complex interconnections. Comparative experiments show that, when a payload drop induces a disturbance propagating through the ropes across the whole formation, the proposed strategy reduces significantly post-disturbance transients.

0.39

CAPTURER: A Dexterous Aerial Manipulator for Dynamic and Precise Grasping across Diverse Environments

cs.RO ·2026-10-29 ·Meng Wang, Jindou Jia, Sicheng Zhou, Zeshuai Chen, Kexin Guo +2 more
similarity 0.67
Abstract

As a representative form of embodied robotic interaction, aerial grasping requires close coordination between the aerial platform and manipulator. Most existing systems perform aerial grasping with static or slowly moving targets under fixed scenarios. Dynamic and precise grasping across different conditions introduces additional challenges, including target motion, localization drift, dynamic coupling, and external disturbances. In this work, we present CAPTURER, a dexterous aerial manipulator for centimeter-level grasping across diverse environments. To achieve the challenging goal, we first develop an onboard perception system for state estimation and target detection. Drift correction and global pose transformation are introduced to improve target localization during flight. A cooperative motion planner is proposed to coordinate the mobility of the aerial platform with the dexterity of the manipulator according to the relative target state. To maintain grasping accuracy under disturbances, we design a disturbance-rejection controller to compensate for dynamic coupling, model uncertainty, and external disturbances. The capability of CAPTURER is validated through indoor and outdoor experiments with both static and moving targets. The results demonstrate that CAPTURER achieves centimeter-level grasping accuracy for a marker pen measuring only 1.5 cm in diameter at flight speeds exceeding 1.5 m/s.

0.24