CS Paper Radar

Selective Sliding Mode Control Enhances Robustness of Aerial Robots Under Disturbances

Anoop Kiran, Thales C. Silva, Nora Ayanian

cs.RO eess.SY ·submitted 2026-10-28 21:18 UTC · v1
hot direction

Abstract

Quadrotor control under disturbances such as wind gusts and payload variations remains challenging. First-order sliding mode control (SMC) and matched/unmatched uncertainty distinction are classical approaches; however, neither tells a practitioner which loops in a cascaded controller should be made robust to sustain disturbances, how to tune those loops, nor what the additional costs are on an embedded processor. Applying robust control uniformly across all axes addresses disturbances indiscriminately, adding tuning effort on axes where no disturbance acts. On inherently underactuated vehicles, disturbances along some axes cannot be opposed directly at all. We propose a principled methodology for deciding where robust control belongs in a cascaded architecture, with all control running onboard the vehicle. We recover the acting disturbance from PID hover flights under disturbance by inverting the equations of motion, use the recovered signal to identify and quantify the excited axes, and deploy robust control where it counts. Experiments on a Crazyflie 2.1 quadrotor under slung-payload and oblique-wind disturbances show tracking improvements concentrated on the axes the rule selects, and gain sweeps confirm that the switching gain reduces error on matched axes but has no effect on an excited unmatched axis, as the analysis predicts.

Comment
8 pages, 5 tables, 8 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Observer-Based Robust Control for an Aerial Manipulator System under Unknown External Disturbances

eess.SY ·2026-09-07 ·Mayank Pandey, Sneha Gajbhiye
similarity 0.67
Abstract

This paper addresses the mathematical modeling and control of an aerial manipulator system comprising a quadrotor as the uncrewed aerial vehicle and a robotic arm as the manipulator. The dynamic model is established by identifying the overall center-of-mass velocity and the system's orientation as constraints, yielding a simplified, two-decoupled subsystems: a locked (overall translation) subsystem and a shape-space (actuation or overall rotation) subsystem, both subjected to external disturbances. Since the system is mechanically coupled, a critical challenge arises where constant bounded disturbances in the first subsystem manifest as time-varying, state-dependent disturbances in the second subsystem. Given that the quadrotor is inherently unstable, the movement of the robotic manipulator (RM) during flight can further jeopardize the stability of the entire QRM system if these disturbances and coupling effects are not effectively managed. To address this, we present a continuous nonlinear disturbance observer-based feedback control law, which enables the independent control of each subsystem while systematically eliminating cross-coupling effects. The efficacy of the proposed controller is validated through multiple simulations emulating practical operating conditions, thereby substantiating its real-world applicability and highlighting the core contributions of this work.

0.11

Estimation-Aware Control on Quadrotor State Manifolds via Anisotropic Covariance Filtering

eess.SY ·2026-11-11 ·Daniel Engelsman, Itzik Klein
similarity 0.62
Abstract · 11 Pages, 14 Figures, 2 Tables

Conventional nonlinear flight controllers operate under the implicit assumption of reliable, high-confidence state feedback. During transient sensing degradation or partial unobservability, state estimation uncertainty is frequently misinterpreted as physical tracking error, triggering aggressive and parasitic corrective inputs. To mitigate this vulnerability, we propose a generalized Estimation-Aware (EA) control framework that directly incorporates real-time estimator confidence into control execution. By mapping the posterior error covariance $\mathbf{P}_{k\mid k}$ into an uncertainty-dependent modulation operator, the EA mechanism dynamically scales feedback authority, performing anisotropic attenuation along weakly observed state directions to prevent false error corrections. Validated across six distinct control paradigms, the proposed approach demonstrates substantial performance gains across all baselines. In particular, when integrated into an Incremental Nonlinear Dynamic Inversion (INDI) architecture, the EA mechanism reduces tracking and estimation errors by 24.34% and 33.24%, respectively, at a high flight speed of 10 m/s.

0.26

Statistical Turbulence and High-Fidelity Disturbance Fields for Quadrotor Flight Control

cs.LG physics.flu-dyncs.RO ·2026-09-09 ·Xun Huang
similarity 0.62
Abstract

Reinforcement-learning quadrotor controllers are usually trained under simplified wind models, yet the impact of wind-field fidelity, as opposed to magnitude, on policy robustness remains unquantified. This paper compares five disturbance-fidelity levels, from wind-free flight and discrete 1-cosine gusts through statistical turbulence and synthetic coherent structures to large-eddy-simulation fields of the atmospheric boundary layer, in a full cross-fidelity train test evaluation of proximal policy optimization (PPO) agents, with cascaded PID and geometric SE(3) controllers as training-free references, over a 0-12 m/s wind sweep. Before any controller comparison is made, all disturbance data are validated: every synthetic generator is checked quantitatively against its analytical or certification-standard reference, and the large-eddy-simulation fields against the imposed log law. On a racing-class quadrotor in hover, the train test matrix is remarkably flat, and the cheapest structured training wind, which is discrete-gust domain randomization, ranks first in every test column, a ranking replicated on a wind-sensitive 27 g platform; a once-tuned geometric controller brackets the learned PPO policies at zero crash rate. Mechanism diagnostics show that control authority, not wind realism, bounds robustness, so wind-fidelity investment should scale with platform wind sensitivity.

0.30

A Switched Adaptive Control Framework for Aerial Manipulators Under Dynamic Transitions

cs.RO ·2026-09-21 ·Rishabh Dev Yadav, Saksham Gupta, Amitabh Sharma, Sarthak Mishra, Wei Pan +2 more
top venue similarity 0.62
Abstract

Aerial manipulators represent the forefront of aerial robotics. Although potentially capable of complex interaction tasks, controlling aerial manipulators throughout the dynamic transitions occurring during task execution presents significant challenges. Abrupt or discontinuous changes in system dynamics generated by the transitions suggest the use of a switched approach, yet the available aerial manipulation methods are not designed for coping with switched regimes. In addition, most available methods fall short in coping with the tight couplings between the aerial vehicle and the manipulator, as well as in coping with the state-dependent uncertainties arising from the difficulty in modeling such couplings. We propose a switched-based adaptive control framework for aerial manipulators not relying on a priori knowledge of the vehicle-manipulator couplings and of state-dependent uncertainties. To guarantee stable manipulation despite changes in system dynamics, the framework provides a class of switching signals characterizing those transition phases for which the system is guaranteed to remain stable. Comparative experiments further validate the effectiveness of the proposed switched-based framework over the state of the art.

0.59

CALM: Decentralized Control of Cooperative Aerial Manipulation with Multi-Agent Reinforcement Learning

cs.RO cs.MA ·2026-10-13 ·Jiaxi Huo, Petre Ricioppo, Fausto Francesco Lizzio
similarity 0.62
Abstract · 8 pages

Cooperative aerial manipulation is difficult under wind, payload motion, and noisy goal broadcasts because multiple Unmanned Aerial Vehicles (UAVs) are coupled through a shared payload. We present CALM (Cooperative Aerial Learned Manipulation), a decentralized controller for aerial manipulators carrying a basket while tracking a moving ground robot. CALM combines a parameter-shared Multi-Agent Reinforcement Learning (MARL) policy, trained using Multi-Agent Proximal Policy Optimization (MAPPO), with goal estimation, per-UAV Extended State Observers (ESOs), basket-mass estimation, and anticipatory formation-yaw feedforward. The anticipatory formation-yaw feedforward uses estimated goal motion to rotate the formation before position error develops, reducing basket-yaw lag without adding net commanded force. A disturbance-conditioned critic supports centralized training while execution remains decentralized. Across held-out trajectories, CALM achieves lower mean position and orientation errors than all evaluated baselines, including the matched arm baseline (7.68 versus 10.95 cm and 3.3 versus 4.7$^\circ$), the cable-suspended realization, and two model-based controllers. Under unseen full-information-path degradation, CALM remains statistically comparable or superior to the arm baseline. Videos are available at https://petreric.github.io/CALM/.

0.19

AM-Bench: A Modular Simulation Suite and Benchmark for Aerial Manipulation Policy Learning

cs.RO ·2026-09-01 ·Yutong Wang, Dongjae Lee, Xiaofeng Guo, Yuanzhu Zhan, Yufei Jiang +7 more
benchmarkhighly cited similarity 0.62
Abstract · 28 pages, 7 figures, 15 tables

Standardized benchmarks have played a central role in advancing robot manipulation learning, yet most focus on ground-supported manipulation systems, which limits their applicability to dynamics-critical domains such as aerial manipulation (AM). AM presents distinct system-level challenges, including environmental disturbances, coupled dynamics between the manipulator and floating base, and constrained degrees of freedom. Consequently, task performance depends jointly on robot embodiment, low-level control, and high-level policy design. We introduce AM-Bench, a modular simulation suite and benchmark for multirotor-based AM policy learning. AM-Bench includes representative embodiments spanning underactuated, fully actuated, and overactuated systems, 12 tasks across contact, transport, and constrained interaction, configurable aerodynamic disturbances and actuator saturation, standard low-level controllers, and baseline policy-learning algorithms. Unlike prior manipulation benchmarks that primarily emphasize end-to-end policy performance, AM-Bench enables system-level evaluation of how embodiment, control, disturbances, and policy choices interact. We demonstrate its diagnostic value through three simulation studies spanning high-level policies, policy--control interfaces, and embodiments, together with real-world validation of modeled effects and a hardware test of the learning pipeline.

0.47

Real-Time Disturbance-Aware Koopman Model Predictive Control for Quadrotors in Spatially Varying Winds

cs.RO eess.SY ·2026-10-20 ·Stella Kombo, Masih Haseli, Alejandro A. Stefan-Zavala, Peter I. Renn, Morteza Gharib +1 more
similarity 0.61
Abstract

Reliable quadrotor flight in disturbed environments requires predictive models that remain accurate as unmodeled aerodynamic effects change during deployment. We introduce a disturbance-aware Koopman Control Family (DA-KCF) framework that preserves an offline-identified nominal model while learning only a disturbance-induced correction online. A reference-dependent KCF is first learned from simulation data and calibrated using limited hardware data. During deployment, the nominal KCF remains fixed while a lightweight residual ensemble learns a low-dimensional disturbance correction from causal state-command-state transitions. The Adaptive DA-KCF model is incorporated into MPC, where disturbance corrections are evaluated along the prediction horizon to optimize position and yaw references sent to the onboard stabilizing controller. Hardware experiments on a nano-quadrotor under uniform wind and a spatially varying wake demonstrate that online adaptation improves multi-step prediction and trajectory tracking as disturbance-induced model mismatch increases, while satisfying real-time control requirements.

0.18

Onboard Wind-Preview Model Predictive Control Using Pitot-Static Sensing for Multirotor UAVs

cs.RO ·2026-09-25 ·Bas Meere, Eline Wisse, Laurens Vousten, Sander Doodeman, Elena Torta +2 more
similarity 0.61
Abstract · Submitted to ICRA 2027

Effective wind gust rejection and stable hovering are critical for the outdoor operation of autonomous drones. However, existing gust rejection methods are primarily reactive, inferring the disturbance from the resulting motion or measuring it at the airframe. Either way, the wind has already begun to act before it can be compensated. In this work, we anticipate the gust instead by measuring the wind ahead of the drone with a low-cost, low-weight pitot-static sensor mounted on a boom. The resulting wind preview is incorporated into a nonlinear model predictive controller (MPC), which optimizes the drone motion while anticipating wind disturbances. A longer boom offers more preview time but adds inertia and degrades flight performance. We characterize this trade-off in simulation and show that the optimal preview distance is not a fixed property of the platform, but shifts with the wind speed and with how quickly the drone can respond. Indoor hardware experiments confirm the trend and show that the proposed controller substantially improves hover performance against a PX4 baseline and an otherwise identical wind-unaware MPC. Outdoor experiments show that the error along the wind direction is reduced by 54 percent with respect to the baseline, demonstrating that a single wind-aligned sensor can significantly improve hovering performance.

0.21