CS Paper Radar

Onboard Wind-Preview Model Predictive Control Using Pitot-Static Sensing for Multirotor UAVs

Bas Meere, Eline Wisse, Laurens Vousten, Sander Doodeman, Elena Torta, Paula Chanfreut, Duarte Antunes

cs.RO ·submitted 2026-09-25 12:16 UTC · v1

Abstract

Effective wind gust rejection and stable hovering are critical for the outdoor operation of autonomous drones. However, existing gust rejection methods are primarily reactive, inferring the disturbance from the resulting motion or measuring it at the airframe. Either way, the wind has already begun to act before it can be compensated. In this work, we anticipate the gust instead by measuring the wind ahead of the drone with a low-cost, low-weight pitot-static sensor mounted on a boom. The resulting wind preview is incorporated into a nonlinear model predictive controller (MPC), which optimizes the drone motion while anticipating wind disturbances. A longer boom offers more preview time but adds inertia and degrades flight performance. We characterize this trade-off in simulation and show that the optimal preview distance is not a fixed property of the platform, but shifts with the wind speed and with how quickly the drone can respond. Indoor hardware experiments confirm the trend and show that the proposed controller substantially improves hover performance against a PX4 baseline and an otherwise identical wind-unaware MPC. Outdoor experiments show that the error along the wind direction is reduced by 54 percent with respect to the baseline, demonstrating that a single wind-aligned sensor can significantly improve hovering performance.

Comment
Submitted to ICRA 2027

Closest papers

Nearest neighbours by meaning across the whole index.

Nonlinear Model Predictive Control via Sequential Convex Programming for Drone-to-Drone Docking

cs.RO ·2026-08-11 ·Neeraj Balachandar, Shriram Hari, Vishnu R. Unni
published similarity 0.64
Abstract · Accepted at IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM) 2026

Autonomous mid-air docking of multi-rotor vehicles under disturbance-driven target motion poses a constrained non-linear trajectory optimization challenge. This work formulates the docking task as a finite-horizon optimal control problem based on a reduced-order nonlinear model augmented with disturbance states. The resulting problem is solved using sequential convex programming within a receding-horizon framework to generate dynamically feasible docking trajectories. State estimation with noisy measurements is incorporated to enable robust relative motion prediction, while trajectory execution is validated in a high-fidelity rigid-body MuJoCo simulation environment. The proposed framework is evaluated for stationary and constant-velocity target motions, demonstrating reliable convergence to the docking interface while satisfying geometric capture constraints. Quantitatively, the method maintains negligible docking-cone violations and terminal state errors within prescribed tolerances, and achieves consistent, safe docking performance for cone half-angles as low as 10 degrees. Robust operation is observed for wind disturbance levels up to a standard deviation of 0.5, while preserving bounded approach velocities and stable control effort. These results demonstrate the effectiveness of the SCP-based trajectory optimization framework for disturbance-robust aerial docking under estimation uncertainty.

0.22

Real-Time Disturbance-Aware Koopman Model Predictive Control for Quadrotors in Spatially Varying Winds

cs.RO eess.SY ·2026-10-20 ·Stella Kombo, Masih Haseli, Alejandro A. Stefan-Zavala, Peter I. Renn, Morteza Gharib +1 more
similarity 0.64
Abstract

Reliable quadrotor flight in disturbed environments requires predictive models that remain accurate as unmodeled aerodynamic effects change during deployment. We introduce a disturbance-aware Koopman Control Family (DA-KCF) framework that preserves an offline-identified nominal model while learning only a disturbance-induced correction online. A reference-dependent KCF is first learned from simulation data and calibrated using limited hardware data. During deployment, the nominal KCF remains fixed while a lightweight residual ensemble learns a low-dimensional disturbance correction from causal state-command-state transitions. The Adaptive DA-KCF model is incorporated into MPC, where disturbance corrections are evaluated along the prediction horizon to optimize position and yaw references sent to the onboard stabilizing controller. Hardware experiments on a nano-quadrotor under uniform wind and a spatially varying wake demonstrate that online adaptation improves multi-step prediction and trajectory tracking as disturbance-induced model mismatch increases, while satisfying real-time control requirements.

0.18

Vehicle-State-Aware Confidence Estimation for Direct Wind Sensing on a Multirotor

cs.RO ·2026-10-19 ·Sri Arjun Senthil Kumar, April Zi Qian Chan, Chen-Hua Yeow
similarity 0.62
Abstract · 8 pages, 4 figures, 2 tables

Direct wind sensing from a multi-rotor UAV enables localized atmospheric measurements, but the reliability of the anemometer depends on vehicle motion. This work presents a vehicle-state-aware confidence method that uses horizontal and vertical vehicle speed to quantify the acquisition of each wind observation. The resulting confidence score is used to adapt measurement influence to a two-dimensional vector estimator. Experiments were conducted during horizontal translation, vertical motion, and held-out autonomous waypoint flight. The proposed two-feature formulation achieved an ROC-AUC of 0.995, with 98.84% of translation observations identified as unreliable. The confidence-aware adaptation reduced median estimator gain during translation from 0.207 to 0.064 while retaining median gain of 0.151 during hover. The results show that vehicle state provides useful proprioceptive context for regulating the influence of direct airborne wind observations.

0.30

Selective Sliding Mode Control Enhances Robustness of Aerial Robots Under Disturbances

cs.RO eess.SY ·2026-10-28 ·Anoop Kiran, Thales C. Silva, Nora Ayanian
hot direction similarity 0.61
Abstract · 8 pages, 5 tables, 8 figures

Quadrotor control under disturbances such as wind gusts and payload variations remains challenging. First-order sliding mode control (SMC) and matched/unmatched uncertainty distinction are classical approaches; however, neither tells a practitioner which loops in a cascaded controller should be made robust to sustain disturbances, how to tune those loops, nor what the additional costs are on an embedded processor. Applying robust control uniformly across all axes addresses disturbances indiscriminately, adding tuning effort on axes where no disturbance acts. On inherently underactuated vehicles, disturbances along some axes cannot be opposed directly at all. We propose a principled methodology for deciding where robust control belongs in a cascaded architecture, with all control running onboard the vehicle. We recover the acting disturbance from PID hover flights under disturbance by inverting the equations of motion, use the recovered signal to identify and quantify the excited axes, and deploy robust control where it counts. Experiments on a Crazyflie 2.1 quadrotor under slung-payload and oblique-wind disturbances show tracking improvements concentrated on the axes the rule selects, and gain sweeps confirm that the switching gain reduces error on matched axes but has no effect on an excited unmatched axis, as the analysis predicts.

0.35

Nonlinear Model Predictive Control for Trajectory Tracking of Differentially Flat Fixed-Wing Aerial Systems

cs.RO ·2026-08-21 ·Nishanth Bobbili, Pratyaksh Rao, Luca Morando, Luca Masci, Giuseppe Loianno
similarity 0.61
Abstract

Planning and control of fixed-wing Unmanned Aerial Vehicles (UAVs) are challenging due to nonlinear dynamics, aerodynamic limits, and environmental disturbances. Differential flatness offers a principled way to generate fast, feasible trajectories, but its use has largely been confined to model-free controllers, which lack predictive capabilities and demand tuning. In this paper, we propose a unified framework that integrates differential flatness-based trajectory generation with Nonlinear Model Predictive Control (NMPC), combining computationally efficient planning with predictive, constraint-aware control. To further improve robustness, we introduce a wind-aware sampling strategy embedded within the NMPC framework, enabling the generation of dynamically feasible reference trajectories that proactively account for wind disturbances while strictly enforcing aerodynamic and control input constraints. We validate the proposed framework through extensive simulations and real-world flight experiments, demonstrating improved tracking accuracy and robustness for complex trajectories, particularly when using the proposed wind-aware sampling strategy under strong wind conditions.

0.21

DR-IPC: Disturbance-Resilient Integrated Planning and Control for LiDAR-Based Quadrotor Navigation

cs.RO eess.SY ·2026-10-02 ·Peng Liu, Jingyan Wang, Qipeng Ye, Wen Li, Jinya Su +3 more
similarity 0.61
Abstract · 11 pages, 16 figures, 7 tables

LiDAR-based quadrotor navigation in cluttered environments remains challenging under external disturbances, particularly when obstacle-aware motion generation and disturbance-rejection control are handled in separate layers. This article presents disturbance-resilient integrated planning and control (DR-IPC), which combines lightweight path guidance with nonlinear model predictive control (NMPC) to directly generate angular velocity and thrust. An interconnected extended Kalman filter and nonlinear disturbance observer jointly provide filtered state estimates and reconstructed disturbances for NMPC prediction. The resulting formulation unifies nonlinear quadrotor dynamics, actuator constraints, local motion generation, and penalised safe-flight-corridor residuals without requiring a separate trajectory-optimization stage. Gazebo and MARSIM simulations, together with indoor and outdoor experiments, validate DR-IPC under wind, suspended payloads, narrow passages, ball impacts and reactive avoidance of a dynamic obstacle. In multi-goal navigation with disturbances, DR-IPC increases the number of completed missions from 1/10 to 9/10 in Gazebo and reduces the altitude RMSE from 0.34 to 0.01 m in experiments. The complete system operates onboard at 100 Hz. Supplementary videos are available on the project page https://drpp316.github.io/DR-IPC-Page/, and the source code will be released.

0.25

Aerodynamic Prior-Free Coordinated Trajectory Generation and Tracking Control for a Tail-Sitter UAV

cs.RO ·2026-09-10 ·Erchao Rong, Zihao Liu, Junning Liang, Jianguo Wang, Xiao Jie +3 more
top venuecode/data similarity 0.61
Abstract

This paper presents a coordinated trajectory generation and tracking control framework for a tail-sitter unmanned aerial vehicle (UAV), which does not require aerodynamic priors identified for a specific airframe while addressing the challenge of flight control under highly nonlinear aerodynamics across the full flight envelope. The core innovation lies in employing phase-specific aerodynamic modeling strategies for planning and tracking, tailored to their distinct functional characteristics, without requiring airframe-specific aerodynamic priors. Specifically, the phi-theory model under coordinated flight is employed to derive an analytic differential flatness mapping, and a simplified but locally accurate model is established for predictive control to enable real-time aerodynamic parameter estimation. The proposed framework is evaluated extensively through both simulation and challenging real-world flight tests under mild wind conditions, showing high-precision tracking and adaptability across the tested aerodynamic conditions. To the best of our knowledge, this is the first real-world demonstration of accurate trajectory tracking over tested flight regimes spanning the full envelope of a tail-sitter UAV without relying on aerodynamic identification campaigns. The source code of our framework is available at: https://github.com/SYSU-HILAB/AP-PnC.

0.34

ISB-NMPC: Interception-Oriented Spherical-Bearing Nonlinear Model Predictive Control for Quadrotors

cs.RO ·2026-10-26 ·Li Hong, Linkai Liu, Xiangyu Ren, Shuli Lv, Chen Min +4 more
code/data similarity 0.61
Abstract · 9 pages, 10 figures, and 1 table. Submitted to IEEE/ASME Transactions on Mechatronics

Quadrotor interceptors equipped with strapdown cameras offer a low-cost solution for physically countering unauthorized UAVs. However, this configuration inherently couples vehicle maneuvering and camera pointing, creating a conflict between rapid closing and maintaining target visibility. We present interception-oriented spherical-bearing nonlinear model predictive control (ISB-NMPC), which couples spherical-bearing prediction with nonlinear quadrotor dynamics to jointly optimize target-directed closing motion and visibility. An attitude-compensated extended Kalman filter on S^2 estimates target bearing motion, compensates for perception delay, and predicts target bearings to guide scale-adaptive detection. Across 30 paired simulation trials, ISB-NMPC achieves an interception success rate of 86.7%, the highest among the evaluated controllers, with a mean per-trial target-visible time of 99.11%. Outdoor flights demonstrate acquisition of a 30 cm target at approximately 150 m, with interceptor speed reaching 17 m/s in the long-range flight and approximately 14 m/s while pursuing a quadrotor-towed maneuvering target. The software and hardware are open source at https://github.com/HOLYNOTBAD/ISB-NMPC and https://github.com/HOLYNOTBAD/holydrone, respectively.

0.32