CS Paper Radar

Aerodynamic Prior-Free Coordinated Trajectory Generation and Tracking Control for a Tail-Sitter UAV

Erchao Rong, Zihao Liu, Junning Liang, Jianguo Wang, Xiao Jie, Haoran Fu, Ziliang Chen, Ximin Lyu

cs.RO ·submitted 2026-09-10 15:22 UTC · v1
top venuecode/data

Abstract

This paper presents a coordinated trajectory generation and tracking control framework for a tail-sitter unmanned aerial vehicle (UAV), which does not require aerodynamic priors identified for a specific airframe while addressing the challenge of flight control under highly nonlinear aerodynamics across the full flight envelope. The core innovation lies in employing phase-specific aerodynamic modeling strategies for planning and tracking, tailored to their distinct functional characteristics, without requiring airframe-specific aerodynamic priors. Specifically, the phi-theory model under coordinated flight is employed to derive an analytic differential flatness mapping, and a simplified but locally accurate model is established for predictive control to enable real-time aerodynamic parameter estimation. The proposed framework is evaluated extensively through both simulation and challenging real-world flight tests under mild wind conditions, showing high-precision tracking and adaptability across the tested aerodynamic conditions. To the best of our knowledge, this is the first real-world demonstration of accurate trajectory tracking over tested flight regimes spanning the full envelope of a tail-sitter UAV without relying on aerodynamic identification campaigns. The source code of our framework is available at: https://github.com/SYSU-HILAB/AP-PnC.

Closest papers

Nearest neighbours by meaning across the whole index.

Nonlinear Model Predictive Control for Trajectory Tracking of Differentially Flat Fixed-Wing Aerial Systems

cs.RO ·2026-08-21 ·Nishanth Bobbili, Pratyaksh Rao, Luca Morando, Luca Masci, Giuseppe Loianno
similarity 0.76
Abstract

Planning and control of fixed-wing Unmanned Aerial Vehicles (UAVs) are challenging due to nonlinear dynamics, aerodynamic limits, and environmental disturbances. Differential flatness offers a principled way to generate fast, feasible trajectories, but its use has largely been confined to model-free controllers, which lack predictive capabilities and demand tuning. In this paper, we propose a unified framework that integrates differential flatness-based trajectory generation with Nonlinear Model Predictive Control (NMPC), combining computationally efficient planning with predictive, constraint-aware control. To further improve robustness, we introduce a wind-aware sampling strategy embedded within the NMPC framework, enabling the generation of dynamically feasible reference trajectories that proactively account for wind disturbances while strictly enforcing aerodynamic and control input constraints. We validate the proposed framework through extensive simulations and real-world flight experiments, demonstrating improved tracking accuracy and robustness for complex trajectories, particularly when using the proposed wind-aware sampling strategy under strong wind conditions.

0.21

Equivalent-Agent Guidance for Cooperative UAV Payload Transportation

eess.SY ·2026-09-16 ·Saurabh Kumar, Shashi Ranjan Kumar, Abhinav Sinha
similarity 0.66
Abstract

This paper develops a guidance framework for cooperative transportation of a rigid payload by two uncrewed aerial vehicles (UAVs) to stationary and maneuvering landing platforms. A virtual equivalent-agent representation is first introduced to describe the translational motion of the rigidly coupled UAV-payload system, allowing the transportation problem to be formulated in terms of relative range and line-of-sight dynamics with respect to the landing platform. A geometric analysis establishes the terminal feasibility conditions for payload delivery. In particular, an arbitrary prescribed approach angle can be achieved for a stationary platform, whereas successful delivery to a maneuvering platform with zero relative velocity requires terminal velocity and heading angle synchronization and consequently a zero landing angle. Leveraging this framework, a robust fixed-time sliding mode guidance strategy is developed to regulate both relative range and line-of-sight dynamics. A separate link-orientation controller and control allocation scheme is presented to map virtual equivalent agent commands to the individual UAV's control inputs. The proposed strategy guarantees convergence to the desired landing configuration within a uniformly bounded time, independent of initial engagement geometries, while explicitly accommodating uncertainties arising from target maneuvers. Numerical simulations demonstrate accurate delivery under different terminal approach angles and platform maneuvers, while processor-in-the-loop implementation on a Raspberry Pi demonstrates that the guidance algorithm satisfies the real-time computational requirements. Nonetheless, a comparative analysis shows that the proposed framework achieves better tracking accuracy and faster sliding surface convergence while requiring significantly less control energy from each UAV.

0.22

L1-MPPI: L1 Adaptive Model Predictive Path Integral for Agile UAV Control

cs.RO ·2026-09-29 ·Lukáš Kotek, Ondřej Procházka, Vojtěch Vonásek, Martin Saska, Robert Pěnička
similarity 0.64
Abstract

This work proposes the L1 Adaptive Model Predictive Path Integral (L1-MPPI). It cascades L1 adaptive control with the Model Predictive Path Integral (MPPI) to improve tracking of high-speed UAV trajectories. Thanks to the L1augmentation, the tracking remains accurate even under model uncertainties and external disturbances, such as an additional payload or a mismatch in the modeled aerodynamic drag. In contrast to existing MPPI approaches for UAV control that do not explicitly model aerodynamic effects, varying payloads, and typically neglect the dynamics of low-level motor controllers, our L1-MPPI approach enhances the dynamic model used in the MPPI by incorporating the low-level flight controller and motor dynamics, as well as an iterative mixing scheme that reflects the approach of the low-level controller. The proposed method demonstrates improved tracking performance in both simulation and the real world, even when the UAV is subjected to an unknown payload. In flight with 35% mass increase, our approach lowers the RMSE by 58.61% with respect to plain MPPI. Compared to the same MPPI using an online mass estimator in place of the L1 augmentation, the RMSE is lower by 38.59%. During the real-world experiments the UAV reaches speeds up to 13.50 m/s and accelerations up to 2.5 g.

0.21

Trajectory Inversion for a Rudderless Dual Vectored-Thrust Flying Wing

cs.RO ·2026-11-07 ·Weicheng Di, Qiqi Liu, Jinwu Xiang, Daochun Li, Zhan Tu
similarity 0.64
Abstract

A rudderless dual vectored-thrust flying wing combines vertical takeoff and landing with efficient for- ward flight in a compact tailless configuration. Without aerodynamic control surfaces, vectored thrust couples translation and pitch control. Therefore, generating dy- namically compatible trajectories remains an open chal- lenge. To address this challenge, this study proposes a trajectory generation method that jointly optimizes path geometry and timing. Trajectory inversion yields state and control histories that satisfy the coupled equations of motion. The optimization balances curvature-induced acceleration against aerodynamic support, lowering thrust- vectoring demand while retaining the defining maneuver features. Representative looping and rolling sequences are tracked in closed-loop simulations. These results provide a basis for planning autonomous aerobatic maneuvers with rudderless vectored-thrust aircraft.

0.31

Nonlinear Model Predictive Control via Sequential Convex Programming for Drone-to-Drone Docking

cs.RO ·2026-08-11 ·Neeraj Balachandar, Shriram Hari, Vishnu R. Unni
published similarity 0.64
Abstract · Accepted at IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM) 2026

Autonomous mid-air docking of multi-rotor vehicles under disturbance-driven target motion poses a constrained non-linear trajectory optimization challenge. This work formulates the docking task as a finite-horizon optimal control problem based on a reduced-order nonlinear model augmented with disturbance states. The resulting problem is solved using sequential convex programming within a receding-horizon framework to generate dynamically feasible docking trajectories. State estimation with noisy measurements is incorporated to enable robust relative motion prediction, while trajectory execution is validated in a high-fidelity rigid-body MuJoCo simulation environment. The proposed framework is evaluated for stationary and constant-velocity target motions, demonstrating reliable convergence to the docking interface while satisfying geometric capture constraints. Quantitatively, the method maintains negligible docking-cone violations and terminal state errors within prescribed tolerances, and achieves consistent, safe docking performance for cone half-angles as low as 10 degrees. Robust operation is observed for wind disturbance levels up to a standard deviation of 0.5, while preserving bounded approach velocities and stable control effort. These results demonstrate the effectiveness of the SCP-based trajectory optimization framework for disturbance-robust aerial docking under estimation uncertainty.

0.22

Real-Time Disturbance-Aware Koopman Model Predictive Control for Quadrotors in Spatially Varying Winds

cs.RO eess.SY ·2026-10-20 ·Stella Kombo, Masih Haseli, Alejandro A. Stefan-Zavala, Peter I. Renn, Morteza Gharib +1 more
similarity 0.62
Abstract

Reliable quadrotor flight in disturbed environments requires predictive models that remain accurate as unmodeled aerodynamic effects change during deployment. We introduce a disturbance-aware Koopman Control Family (DA-KCF) framework that preserves an offline-identified nominal model while learning only a disturbance-induced correction online. A reference-dependent KCF is first learned from simulation data and calibrated using limited hardware data. During deployment, the nominal KCF remains fixed while a lightweight residual ensemble learns a low-dimensional disturbance correction from causal state-command-state transitions. The Adaptive DA-KCF model is incorporated into MPC, where disturbance corrections are evaluated along the prediction horizon to optimize position and yaw references sent to the onboard stabilizing controller. Hardware experiments on a nano-quadrotor under uniform wind and a spatially varying wake demonstrate that online adaptation improves multi-step prediction and trajectory tracking as disturbance-induced model mismatch increases, while satisfying real-time control requirements.

0.18

FF-MPCC: High-speed Agile Formation Flight with Model Predictive Contouring Control

cs.RO ·2026-08-21 ·Aditya Dandwate, Vit Kratky, Parakh M. Gupta, Martin Saska, Robert Penicka
similarity 0.62
Abstract

Flying in a prescribed formation in an agile manner remains a challenging problem in the field of UAVs, particularly when following highly-demanding trajectories that require flight at platform limits. We address this problem by proposing a novel decentralized approach to formation flight along a given path that integrates formation maintenance into the MPCC framework, allowing UAVs to adapt their progression along complex paths while respecting individual dynamic constraints and maintaining the desired formation. To this end, we introduce a novel reparametrization and synchronization method for dynamic formation geometries together with a decentralized approach to determine the desired positions for the individual UAVs. The proposed approach allows the formation to coordinate high-speed path following without compromising formation integrity. The proposed approach is validated through extensive simulation and real-world experiments involving scenarios with varying complexity of paths and changes of required formation shape on the fly. In comparison to time-parameterized trajectory tracking, we demonstrate improved formation maintenance by 65% in high-speed flight with velocities up to 21 m/s, while achieving comparable times required to reach the goal.

0.16

Robust Variable-Horizon MPC for Landing a Multirotor UAV on a Moving Platform

eess.SY ·2026-09-28 ·Sander Doodeman, Niels Berkers, Paula Chanfreut, Elena Torta, Duarte Antunes
similarity 0.62
Abstract · Submitted to ICRA 2027

Landing a multirotor Unmanned Aerial Vehicle (UAV) on a moving platform is challenging because a UAV is underactuated and the desired landing state is generally a non-equilibrium state. Shrinking- and variable-horizon approaches are promising for reaching such non-equilibrium targets, but often lack robustness to disturbances. Robust Variable-Horizon Model Predictive Control (VH-MPC) addresses this limitation but is computationally complex for a high-dimensional system such as a multirotor UAV. This paper presents a computationally efficient robust Variable-Horizon MPC method for reaching non-equilibrium targets under bounded disturbances. The online horizon search is restricted to a neighborhood of the previously selected horizon, while maintaining recursive feasibility under bounded disturbances. A fixed robust positively invariant tube provides horizon-independent constraint tightening. By exploiting the differential flatness property of a UAV, this approach is applied to a decoupled linearized system, enabling real-time implementation on an onboard Raspberry Pi 5 at 20 Hz. Simulations show that restricting the horizon search substantially reduces computation with limited impact on the objective, while real-time Gazebo simulations demonstrate the robustness of the method. Physical experiments demonstrate successful landing of a multirotor UAV on a moving Stewart platform.

0.13