CS Paper Radar

Trajectory Inversion for a Rudderless Dual Vectored-Thrust Flying Wing

Weicheng Di, Qiqi Liu, Jinwu Xiang, Daochun Li, Zhan Tu

cs.RO ·submitted 2026-11-07 10:49 UTC · v1

Abstract

A rudderless dual vectored-thrust flying wing combines vertical takeoff and landing with efficient for- ward flight in a compact tailless configuration. Without aerodynamic control surfaces, vectored thrust couples translation and pitch control. Therefore, generating dy- namically compatible trajectories remains an open chal- lenge. To address this challenge, this study proposes a trajectory generation method that jointly optimizes path geometry and timing. Trajectory inversion yields state and control histories that satisfy the coupled equations of motion. The optimization balances curvature-induced acceleration against aerodynamic support, lowering thrust- vectoring demand while retaining the defining maneuver features. Representative looping and rolling sequences are tracked in closed-loop simulations. These results provide a basis for planning autonomous aerobatic maneuvers with rudderless vectored-thrust aircraft.

Closest papers

Nearest neighbours by meaning across the whole index.

Extensions to the Dubins Airplane Method - Flight Performance Constraints in Uniform Wind

eess.SY ·2026-11-05 ·Simon Schopferer
top venue similarity 0.67
Abstract

This paper extends the Dubins Airplane Method to generate trajectories for fixed-wing aircraft that remain within flight performance limits in the presence of uniform wind. Within the field of runtime-efficient trajectory generation for fixed-wing aircraft, the Dubins Airplane Method represents a well-received and widely adopted compromise between algorithmic complexity, runtime efficiency, and solution quality. However, its simplistic kinematic model restricts its ability to generate safe and feasible trajectories, especially in the presence of wind. As a mathematical foundation to overcome these limitations, a set of closed-form equations are derived that relate flight performance constraints to kinematic constraints. Building upon existing methods that use trochoids for planning of 2D trajectories in uniform wind, this paper presents a set of iterative algorithms for planning versatile 3D trajectories composed of trochoidal or circular turns and straight flight segments, with constant vertical speed, constant thrust or smooth longitudinal transitions. The presented methods comprise a flexible and modular framework for runtime-efficient generation of performance-aware trajectories based on parametric curves without the need for numerical trajectory representations.

0.43

Aerodynamic Prior-Free Coordinated Trajectory Generation and Tracking Control for a Tail-Sitter UAV

cs.RO ·2026-09-10 ·Erchao Rong, Zihao Liu, Junning Liang, Jianguo Wang, Xiao Jie +3 more
top venuecode/data similarity 0.64
Abstract

This paper presents a coordinated trajectory generation and tracking control framework for a tail-sitter unmanned aerial vehicle (UAV), which does not require aerodynamic priors identified for a specific airframe while addressing the challenge of flight control under highly nonlinear aerodynamics across the full flight envelope. The core innovation lies in employing phase-specific aerodynamic modeling strategies for planning and tracking, tailored to their distinct functional characteristics, without requiring airframe-specific aerodynamic priors. Specifically, the phi-theory model under coordinated flight is employed to derive an analytic differential flatness mapping, and a simplified but locally accurate model is established for predictive control to enable real-time aerodynamic parameter estimation. The proposed framework is evaluated extensively through both simulation and challenging real-world flight tests under mild wind conditions, showing high-precision tracking and adaptability across the tested aerodynamic conditions. To the best of our knowledge, this is the first real-world demonstration of accurate trajectory tracking over tested flight regimes spanning the full envelope of a tail-sitter UAV without relying on aerodynamic identification campaigns. The source code of our framework is available at: https://github.com/SYSU-HILAB/AP-PnC.

0.34

From Model to Prototype: Design and Motor-Flap Propulsion Control of a Twin-Wing Metamorphic UAV

cs.RO ·2026-10-06 ·Anja Bosak, Dorian Erić, Ana Milas, Stjepan Bogdan
similarity 0.60
Abstract · 8 pages, 12 figures

This paper presents the design and control strategy for MetaMorpher, a metamorphic Unmanned Aerial Vehicle (UAV), capable of both spinning-wing hover and fixed flying-wing cruise flight. Since control of the cruise configuration is comparatively well established in the literature, this paper focuses on control of the MetaMorpher in hover mode, building on the flight dynamics model and conceptual design validated in previous work. The control algorithm is implemented using one of two phase-synchronized strategies: motor propulsion, which pulses motor thrust in synchrony with the vehicle's rotation, or flap propulsion, a novel strategy that pulses the deflection of the wing-mounted elevons. We evaluate both strategies in simulation through different flight experiments. Simulation results confirm the mathematical model and show stable reference tracking, demonstrating flap propulsion as a lightweight, decoupled alternative for hover control. Experimental testing validated the vertical-dynamics propulsion model against the physical prototype, demonstrating very good steady-state agreement across different configurations.

0.22

Prior Evolution and Task Alignment for Aerial Grasping

cs.RO eess.SY ·2026-09-16 ·Weiliang Deng, Zhengyang Dang, Yao Mu, Ximin Lyu
similarity 0.60
Abstract · 20 pages, 14 figures

Aerial grasping is a remarkable capability exhibited by predatory birds, allowing them to capture prey through highly coordinated maneuvers in flight. Inspired by this capability, researchers have developed various formulations to reproduce such maneuvers through trajectory optimization. However, two limitations remain in practice. First, the resulting optimization problem is highly nonconvex and sensitive to initialization, making high-quality solutions difficult to obtain under a limited computational budget. Second, prescribed numerical objectives are human-designed abstractions that describe successful grasping through a limited set of mathematically tractable quantities and may not fully capture what determines task success. We investigate how learning can address these limitations within an analytical planner. Accordingly, a trajectory prior is first learned from optimized motions and then evolved through a CEM-based process that evaluates sampled initializations with the deployed optimizer and retains favorable ones as new supervision. An Execution-Aware Critic learns from contact, lift, and completion outcomes to assess whether the optimized trajectories are likely to succeed in physical execution. Its frozen energy can further serve as a differentiable grasping cost, allowing execution data to directly shape trajectory generation. Simulation and real-world experiments demonstrate improved optimization reliability, trajectory consistency, and grasping performance.

0.27

Nonlinear Model Predictive Control for Trajectory Tracking of Differentially Flat Fixed-Wing Aerial Systems

cs.RO ·2026-08-21 ·Nishanth Bobbili, Pratyaksh Rao, Luca Morando, Luca Masci, Giuseppe Loianno
similarity 0.60
Abstract

Planning and control of fixed-wing Unmanned Aerial Vehicles (UAVs) are challenging due to nonlinear dynamics, aerodynamic limits, and environmental disturbances. Differential flatness offers a principled way to generate fast, feasible trajectories, but its use has largely been confined to model-free controllers, which lack predictive capabilities and demand tuning. In this paper, we propose a unified framework that integrates differential flatness-based trajectory generation with Nonlinear Model Predictive Control (NMPC), combining computationally efficient planning with predictive, constraint-aware control. To further improve robustness, we introduce a wind-aware sampling strategy embedded within the NMPC framework, enabling the generation of dynamically feasible reference trajectories that proactively account for wind disturbances while strictly enforcing aerodynamic and control input constraints. We validate the proposed framework through extensive simulations and real-world flight experiments, demonstrating improved tracking accuracy and robustness for complex trajectories, particularly when using the proposed wind-aware sampling strategy under strong wind conditions.

0.21

Neural-Primitive: An Efficient End-to-end Local Planner with Primitive-based Imitation Learning for Autonomous Flight

cs.RO cs.AI ·2026-08-21 ·Zhitao Liu, Guangtong Xu, Zihan Wang, Jialiang Hou, Chao Xu +1 more
published similarity 0.60
Abstract · Accepted by IEEE Transactions on Industrial Informatics

Autonomous flight in unknown cluttered environments is hindered by the computation-quality-memory trilemma of onboard trajectory generation. In this paper, we propose an efficient end-to-end local planner via imitation learning. A lightweight offline-primitive-based dataset collection framework is designed to produce safe and high-quality trajectory primitives in non-convex environments. A compact neural network directly maps sensory inputs to polynomial coefficients that inherently encode higher-order dynamical information. The learned policy generates smooth, empirically collision-free and dynamically feasible trajectories in real time without back-end solving. It achieves ultra-fast computation (below 1ms on a standard desktop and average 3.68ms during onboard flight), while maintaining low onboard memory requirements (less than 1.5MiB). Extensive simulation benchmarks demonstrate superiority in both planning latency and target-reaching progress quality. Zero-shot deployment in real-world experiments further validates the robust sim-to-real transfer capability of the proposed method.

0.47

Taming the Tilt: A Unified Pilot Control Concept for Transformational eVTOL Aircraft

eess.SY math.OC ·2026-08-20 ·Daniel Milz, Marc May, Andreas Seefried, Tobias Bellmann
published similarity 0.59
Abstract · Accepted for publication in "Aerospace Systems", 31 pages, 16 figures

Transformational electric vertical take-off and landing (eVTOL) vehicles have gained significant attention over the past decade due to their efficient wing-borne cruise capabilities and reduced reliance on ground-based infrastructure. However, control system design for these vehicles remains challenging, as they must operate across multiple flight phases, each with distinct dominant dynamics. If left unaddressed, this complexity would significantly increase pilot workload, thus motivating the development of pilot control systems for multi-phase flight operations. The Simplified Vehicle Operations concept presents a promising strategy for reducing pilot workload. This study presents the design and implementation of a novel pilot control concept for eVTOL aircraft, validated through a tandem tilt-wing aircraft simulation on a full-motion simulator equipped with an active, force-feedback side stick. The system provides pilots with tactile feedback during specific flight phases, supporting intuitive control. The proposed approach enables seamless transitions and multi-phase flight maneuvers by leveraging the available degrees of freedom. Furthermore, an optimal-control-based methodology is proposed as a metric to evaluate command-filter-induced performance penalties and inceptor activities. The results show that the proposed command filter does not significantly increase the mission duration compared to the closed-loop system, while the active side stick helps reduce inceptor activity.

0.40

Trajectory-Based Co-Optimization of Arrival Scheduling and Descent Path Design in the Terminal Maneuvering Area

eess.SY ·2026-09-03 ·Yutian Pang, John-Paul Clarke
similarity 0.58
Abstract

Terminal arrival scheduling and descent procedure design are studied in two largely separate literatures. Scheduling models reduce each aircraft to a travel time and deliver target landing times, and fuel-efficient descent procedures are designed one aircraft at a time with the schedule taken as given, although both decide where an arriving aircraft absorbs delay before final approach. Existing formulations therefore cannot trade a slower, earlier-configuring descent against level track miles, a schedule that is efficient in time can be expensive in fuel, and autonomous or reduced-crew operations will need a single trajectory plan that ground automation and the flight management system both accept. To close this gap, we propose a four-dimensional terminal arrival scheduler that selects each aircraft's lateral path extension, glideslope-capture distance, and flap-deployment trigger speeds in one decision. We evaluate every candidate idle-thrust descent offline with a wind-aware backward plan and a six-degree-of-freedom forward simulation that returns descent time, fuel burn, minimum track length, and stabilized-approach feasibility, and a rolling-horizon scheduler commits one verified descent and one extension per aircraft under wake-separation constraints and observed entry winds. Two Atlanta terminal airspace case studies quantify the benefit. We show that co-optimized continuous descents save about 15\% of fleet fuel below saturation in a free-descent environment and that delayed deceleration saves about 23\%, while on the six published Runway 8L arrival flows the charted altitude floors remove 31\% of the design lattice and reduce the savings to 9--10\% and 20--21\%, respectively. We also find that wind moves single-aircraft descent fuel by 34--81\% yet explains at most 4\% of fleet fuel variance, because aircraft-specific wind effects average out across a scenario.

0.25