CS Paper Radar

L1-MPPI: L1 Adaptive Model Predictive Path Integral for Agile UAV Control

Lukáš Kotek, Ondřej Procházka, Vojtěch Vonásek, Martin Saska, Robert Pěnička

cs.RO ·submitted 2026-09-29 19:59 UTC · v1

Abstract

This work proposes the L1 Adaptive Model Predictive Path Integral (L1-MPPI). It cascades L1 adaptive control with the Model Predictive Path Integral (MPPI) to improve tracking of high-speed UAV trajectories. Thanks to the L1augmentation, the tracking remains accurate even under model uncertainties and external disturbances, such as an additional payload or a mismatch in the modeled aerodynamic drag. In contrast to existing MPPI approaches for UAV control that do not explicitly model aerodynamic effects, varying payloads, and typically neglect the dynamics of low-level motor controllers, our L1-MPPI approach enhances the dynamic model used in the MPPI by incorporating the low-level flight controller and motor dynamics, as well as an iterative mixing scheme that reflects the approach of the low-level controller. The proposed method demonstrates improved tracking performance in both simulation and the real world, even when the UAV is subjected to an unknown payload. In flight with 35% mass increase, our approach lowers the RMSE by 58.61% with respect to plain MPPI. Compared to the same MPPI using an online mass estimator in place of the L1 augmentation, the RMSE is lower by 38.59%. During the real-world experiments the UAV reaches speeds up to 13.50 m/s and accelerations up to 2.5 g.

Closest papers

Nearest neighbours by meaning across the whole index.

OA-MPPI: Occlusion-Aware Model Predictive Path Integral Control for UAV Flight

cs.RO ·2026-09-23 ·Vittorio Palladino, Teaya Yang, Ruiqi Zhang, Mark W. Mueller
similarity 0.67
Abstract · 8 pages, 6 figures

Autonomous UAV flight through cluttered and partially unknown environments requires reasoning not only about observed obstacles but also about occluded regions that the sensor cannot observe. We present OA-MPPI, an obstacle- and occlusion-aware extension of Model Predictive Path Integral (MPPI) control for quadrotor flight that accounts for potential moving agents emerging from these regions into the vehicle's path. At every planning step, we extract a 3D occlusion boundary from the online occupancy map and use it to model the regions that hidden agents could reach over the prediction horizon. We penalize trajectories that enter these expanding regions within MPPI rollouts generated using nonlinear quadrotor dynamics and accounting for individual rotor thrust limits. We validate the proposed approach in simulation and hardware flight experiments, with the complete pipeline running onboard the vehicle in real time. Results show increased clearance from occlusion boundaries compared to baseline MPPI in both settings, as well as avoidance of an agent emerging from occlusion in simulation.

0.15

Aerodynamic Prior-Free Coordinated Trajectory Generation and Tracking Control for a Tail-Sitter UAV

cs.RO ·2026-09-10 ·Erchao Rong, Zihao Liu, Junning Liang, Jianguo Wang, Xiao Jie +3 more
top venuecode/data similarity 0.64
Abstract

This paper presents a coordinated trajectory generation and tracking control framework for a tail-sitter unmanned aerial vehicle (UAV), which does not require aerodynamic priors identified for a specific airframe while addressing the challenge of flight control under highly nonlinear aerodynamics across the full flight envelope. The core innovation lies in employing phase-specific aerodynamic modeling strategies for planning and tracking, tailored to their distinct functional characteristics, without requiring airframe-specific aerodynamic priors. Specifically, the phi-theory model under coordinated flight is employed to derive an analytic differential flatness mapping, and a simplified but locally accurate model is established for predictive control to enable real-time aerodynamic parameter estimation. The proposed framework is evaluated extensively through both simulation and challenging real-world flight tests under mild wind conditions, showing high-precision tracking and adaptability across the tested aerodynamic conditions. To the best of our knowledge, this is the first real-world demonstration of accurate trajectory tracking over tested flight regimes spanning the full envelope of a tail-sitter UAV without relying on aerodynamic identification campaigns. The source code of our framework is available at: https://github.com/SYSU-HILAB/AP-PnC.

0.34

NMPP: Nonlinear Model Predictive Planning for Agile UAV Flight in Cluttered Environments

cs.RO ·2026-10-06 ·Ondřej Procházka, Juraj Pauko, Robert Pěnička, Martin Saska
similarity 0.62
Abstract

Flying a quadrotor through a cluttered environment requires not only planning a collision-free reference trajectory based on perceived obstacles, but the reference also needs to be dynamically feasible and within the actuation limits of the vehicle, so that the controller can track it precisely. Existing methods either optimize a smooth polynomial inside a convex corridor, which limits agility, or treat obstacles as soft costs traded against tracking performance. We propose a Nonlinear Model Predictive Planning (NMPP) that imposes perceived obstacles as hard geometric constraints and hands a full-state reference to an obstacle-blind SE(3) controller. Our planner achieves a 58-67 % lower position RMSE than a linear Model Predictive Control trajectory planner and a 41-70 % lower RMSE than a polynomial trajectory planner. It also completes all forest flights with up to 9.5 m/s speed without collisions, and achieves 86 % flight success rate under a more aggressive speed profile where a state-of-the-art planner has only 26 % success rate. The real-world deployment showed reliable execution flying up to 5.5 m/s in an unknown cluttered environment.

0.19

Nonlinear Model Predictive Control for Trajectory Tracking of Differentially Flat Fixed-Wing Aerial Systems

cs.RO ·2026-08-21 ·Nishanth Bobbili, Pratyaksh Rao, Luca Morando, Luca Masci, Giuseppe Loianno
similarity 0.61
Abstract

Planning and control of fixed-wing Unmanned Aerial Vehicles (UAVs) are challenging due to nonlinear dynamics, aerodynamic limits, and environmental disturbances. Differential flatness offers a principled way to generate fast, feasible trajectories, but its use has largely been confined to model-free controllers, which lack predictive capabilities and demand tuning. In this paper, we propose a unified framework that integrates differential flatness-based trajectory generation with Nonlinear Model Predictive Control (NMPC), combining computationally efficient planning with predictive, constraint-aware control. To further improve robustness, we introduce a wind-aware sampling strategy embedded within the NMPC framework, enabling the generation of dynamically feasible reference trajectories that proactively account for wind disturbances while strictly enforcing aerodynamic and control input constraints. We validate the proposed framework through extensive simulations and real-world flight experiments, demonstrating improved tracking accuracy and robustness for complex trajectories, particularly when using the proposed wind-aware sampling strategy under strong wind conditions.

0.21

Adaptive Model Predictive Control for Ground Vehicles: Review and Demonstrative Implementation

eess.SY ·2026-08-18 ·Chetana Gadgil, Mahendra Singh Tomar
similarity 0.61
Abstract · 16 pages, 4 figures, journal

This paper reviews Adaptive Model Predictive Control (AMPC) methods for Autonomous Vehicles (AVs), focusing on control strategies that dynamically adapt to uncertainties and changing conditions in real-time. The critical role of Adaptive Model Predictive Control (AMPC) in addressing the challenges of autonomous vehicle control are discussed. For the scope of this paper, AMPC is defined as a class of Model Predictive Control (MPC) techniques that modify the system model, cost function, constraints, or prediction horizon, based on real-time data. Traditional MPC, while effective for constrained optimization, struggles with model inaccuracies, computational demands, and dynamic environments, necessitating AMPC methods. The review covers existing literature on Gain scheduled MPC, Online Model Estimation MPC, Weight Adaptive MPC, Horizon Adaptive MPC, Learning Based MPC, and Hybrid MPC that combines MPC with other control methods. In addition to the survey, a demonstrative simulation of an adaptive MPC controller is presented that illustrates practical aspects of weight and speed adaptation in trajectory tracking.

0.29

A Game-Theoretic MPC Planner for Cooperative and Adversarial Drone Coordination

cs.RO eess.SY ·2026-11-09 ·Zdeněk Bouček, Miroslav Flídr
similarity 0.60
Abstract · 7 pages, 4 figures, submitted to European Control Conference (ECC27)

We present and evaluate a game-theoretic model predictive control planner for cooperative goal reaching and adversarial pursuit-evasion with drones. The planner combines 3D prediction, individual objectives, optional shared separation constraints and trajectory-tracking interfaces. A comparison of cooperative game solvers assesses their ability to find feasible trajectories that resolve conflicts. A computational study quantifies how number of drones, prediction horizon and move blocking affect computation time and numerical acceptance. Move blocking holds control inputs constant over groups of prediction steps, reducing the number of independent control variables and lowering computation time. Timing measurements identify the practical limits of real-time planning in the tested configurations. PyBullet simulations demonstrate cooperative goal reaching and pursuit-evasion. A laboratory flight complements the simulations by validating the trajectory-tracking interfaces on physical drones. The planner can serve as a basis for further evaluation and controller development.

0.25

Taylor-Informed Predictive Cost Adaptive Control for Quadrotors with Online Gravity-Trim Adaptation

eess.SY ·2026-09-03 ·Tam W. Nguyen
similarity 0.60
Abstract · 6 pages, 4 figures

This paper develops Taylor-informed predictive cost adaptive control (PCAC) for quadrotors with online gravity-trim adaptation. First-, second-, and third-order expansions of the nonlinear dynamics about nominal hover define sparse sampled-data dictionaries for row-wise recursive least-squares identification with variable-rate forgetting. At each step, the identified predictor is linearized at the current state, and its Jacobian is fixed over the prediction horizon. The identified vertical dynamics also estimate the vehicle mass and gravity-trim input, eliminating fixed nominal gravity compensation. Simulations with an abrupt payload change and aggressive helix tracking show that the higher-order predictors improve prediction and tracking while preserving the standard PCAC formulation.

0.29

LLA-MPPI: Rapidly Adaptive Whole-body Control of Legged Robots with GPU-Accelerated Parallel Simulations

cs.RO eess.SY ·2026-10-07 ·Sebin Jung, Maitham F. AL-Sunni, Juan Alvarez-Padilla, Zachary Manchester, Changliu Liu +1 more
code/data similarity 0.60
Abstract · The first two authors are co-first authors (contributed equally to the work)

Real-time whole-body controllers for legged robots typically plan through a fixed nominal model and degrade when the deployed dynamics change. Adaptive methods typically require a model structure that contact dynamics do not provide, or they need offline training for each anticipated condition. We present Look-back and Look-ahead Adaptive Model Predictive Path Integral control (LLA-MPPI). The method converts whole-body adaptation into selection over a bank of GPU-batched contact simulators with different physical or structural parameters. Windowed prediction errors select the simulator that best explains recent motion. A whole-body MPPI planner optimizes controls through the selected model. The framework requires no offline training, and its selected hypotheses are physically interpretable. Across four simulated tasks, it achieves 97.5% success while the strongest baseline reaches 74% and an oracle with the true model reaches 98.5%. Hardware validation on a Unitree Go2 shows the robot walking under a payload added mid-run, walking after one leg is disabled, and pushing a box to its goal while increasing its mass on the fly. Code, videos, and project details are available at: https://lla-control.github.io

0.29