CS Paper Radar

Vehicle-State-Aware Confidence Estimation for Direct Wind Sensing on a Multirotor

Sri Arjun Senthil Kumar, April Zi Qian Chan, Chen-Hua Yeow

cs.RO ·submitted 2026-10-19 02:36 UTC · v1

Abstract

Direct wind sensing from a multi-rotor UAV enables localized atmospheric measurements, but the reliability of the anemometer depends on vehicle motion. This work presents a vehicle-state-aware confidence method that uses horizontal and vertical vehicle speed to quantify the acquisition of each wind observation. The resulting confidence score is used to adapt measurement influence to a two-dimensional vector estimator. Experiments were conducted during horizontal translation, vertical motion, and held-out autonomous waypoint flight. The proposed two-feature formulation achieved an ROC-AUC of 0.995, with 98.84% of translation observations identified as unreliable. The confidence-aware adaptation reduced median estimator gain during translation from 0.207 to 0.064 while retaining median gain of 0.151 during hover. The results show that vehicle state provides useful proprioceptive context for regulating the influence of direct airborne wind observations.

Comment
8 pages, 4 figures, 2 tables

Closest papers

Nearest neighbours by meaning across the whole index.

Onboard Wind-Preview Model Predictive Control Using Pitot-Static Sensing for Multirotor UAVs

cs.RO ·2026-09-25 ·Bas Meere, Eline Wisse, Laurens Vousten, Sander Doodeman, Elena Torta +2 more
similarity 0.62
Abstract · Submitted to ICRA 2027

Effective wind gust rejection and stable hovering are critical for the outdoor operation of autonomous drones. However, existing gust rejection methods are primarily reactive, inferring the disturbance from the resulting motion or measuring it at the airframe. Either way, the wind has already begun to act before it can be compensated. In this work, we anticipate the gust instead by measuring the wind ahead of the drone with a low-cost, low-weight pitot-static sensor mounted on a boom. The resulting wind preview is incorporated into a nonlinear model predictive controller (MPC), which optimizes the drone motion while anticipating wind disturbances. A longer boom offers more preview time but adds inertia and degrades flight performance. We characterize this trade-off in simulation and show that the optimal preview distance is not a fixed property of the platform, but shifts with the wind speed and with how quickly the drone can respond. Indoor hardware experiments confirm the trend and show that the proposed controller substantially improves hover performance against a PX4 baseline and an otherwise identical wind-unaware MPC. Outdoor experiments show that the error along the wind direction is reduced by 54 percent with respect to the baseline, demonstrating that a single wind-aligned sensor can significantly improve hovering performance.

0.21

Estimation-Aware Control on Quadrotor State Manifolds via Anisotropic Covariance Filtering

eess.SY ·2026-11-11 ·Daniel Engelsman, Itzik Klein
similarity 0.60
Abstract · 11 Pages, 14 Figures, 2 Tables

Conventional nonlinear flight controllers operate under the implicit assumption of reliable, high-confidence state feedback. During transient sensing degradation or partial unobservability, state estimation uncertainty is frequently misinterpreted as physical tracking error, triggering aggressive and parasitic corrective inputs. To mitigate this vulnerability, we propose a generalized Estimation-Aware (EA) control framework that directly incorporates real-time estimator confidence into control execution. By mapping the posterior error covariance $\mathbf{P}_{k\mid k}$ into an uncertainty-dependent modulation operator, the EA mechanism dynamically scales feedback authority, performing anisotropic attenuation along weakly observed state directions to prevent false error corrections. Validated across six distinct control paradigms, the proposed approach demonstrates substantial performance gains across all baselines. In particular, when integrated into an Incremental Nonlinear Dynamic Inversion (INDI) architecture, the EA mechanism reduces tracking and estimation errors by 24.34% and 33.24%, respectively, at a high flight speed of 10 m/s.

0.20

Towards Agile Vision-Based Multi-UAV Flight: Revisiting State Estimation

cs.RO ·2026-09-30 ·Michal Pliska, Matouš Vrba, Ondřej Víta, Martin Jiroušek, Viktor Walter +1 more
publishedbenchmark similarity 0.60
Abstract · This work has been accepted to the IEEE for possible publication (IROS 2026)

Agile multi-UAV flight requires accurate and low-latency onboard estimation of the kinematic states of neighboring UAVs for collision avoidance, motion coordination, etc. Most vision-based approaches rely on position-only measurements, inferring velocity and acceleration indirectly from displacement. We show that this introduces a fixed structural delay in the estimation of higher-order states, which limits the achievable agility. To address this, we propose to integrate tilt measurements, provided by a state-of-the-art visual detector, which inform about the thrust direction of co-planar multirotor UAVs. We benchmark four position-only and five pose-aware estimators, including a novel formulation of a linear thrust-constraining Kalman filter, on two real-world and one high-fidelity photorealistic simulated dataset over different levels of agility (3-21 m/s^2). In our setup, pose-aware estimation consistently reduces the average velocity and acceleration estimation errors by 40% and 57% across the three datasets with the proposed KF formulation outperforming the other estimators. Position-only filters exhibit a constant ~300 ms delay in acceleration step response independent of agility, whereas the tilt-constrained estimators operate near the physical response limit given by the camera frame-rate by observing the change in thrust direction before the displacement accumulates. In a closed-loop leader-follower simulated experiment with NMPC control, position-only estimation of the leader's state fails to facilitate stable hovering of the follower, while the proposed estimator enables tracking of lateral maneuvers exceeding 2g of acceleration.

0.26

Belief-Adaptive Online Autonomy for Quadrotor UAV Navigation under GNSS Degradation in Urban Environments

cs.RO eess.SY ·2026-09-13 ·Deepak Kumar Panda, Weisi Guo
similarity 0.59
Abstract

Reliable online autonomy is critical for quadrotor operation in urban airspaces, where global navigation satellite systems (GNSS) measurements suffer from multipath, blockage, and latency issues, introducing non-stationary, temporally correlated errors that degrade conventional GNSS-IMU fusion. This paper presents a belief-adaptive online autonomy framework that augments an extended Kalman filter (EKF) with explicit GNSS trust modelling, second-order online belief adaptation, and latency-aware out-of-sequence measurement handling. GNSS trust is represented as a latent belief state that modulates measurement weighting and multipath bias uncertainty, and is updated online using EKF consistency signals. Unlike reactive covariance tuning, the proposed approach enables proactive and stable sensor trust adaptation without prior environmental knowledge or offline training. Evaluation in simulated urban air mobility scenarios with correlated multipath, stochastic latency, and obstacle constraints demonstrates improved belief convergence, smoother trajectories, and reduced estimation and tracking errors compared to naive, adaptive, and first-order baselines. The framework preserves classical GNSS-IMU fusion structure and can be integrated directly into existing flight control pipelines, supporting robust online autonomy in GNSS degraded environments.

0.16

Tilt-Rotor Quadcopter with Learned Residual Control and Mode-Dependent State Estimation

cs.RO ·2026-10-22 ·Ninad Joshi, Prabhat Kumar
similarity 0.57
Abstract · 5 figures

Tilt-rotor quadcopters redirect thrust for translation without banking, but complicate modeling, state estimation, and disturbance rejection. This paper presents a simulation-based flight stack for a \SI{2.00}{\kilo\gram} tilt-rotor quadcopter. The system uses a six-degree-of-freedom nonlinear model with first-order motor dynamics and two-axis rotor tilt, parameterized using a 3D CAD model. A cascaded PD controller commands forward and lateral tilt angles. A 14-state EKF fuses sensor data across hover, early-transition, and transition modes using a hysteretic (Schmitt-trigger) classifier to prevent covariance discontinuities. Because the proportional position loop leaves a steady-state offset under constant wind, a small bounded neural residual is added on top of the unmodified PD controller. It is trained by behavioral cloning from a teacher with privileged access to the true wind, while the deployed network never observes wind. In simulation, the EKF achieves a post-settling position root mean square error (RMSE) of \SI{0.226}{\metre} (horizontal) and \SI{0.03}{\metre} (vertical) and an attitude RMSE below \SI{0.8}{\degree}, and it estimates a wind velocity of $(\num{2.0}, \num{-1.2})\,\unit{\metre\per\second}$ to within \SI{0.15}{\metre\per\second} per axis. The residual reduces steady-state station-keeping error under wind by approximately \SI{49}{\percent}, from \SI{0.117}{\metre} to \SI{0.060}{\metre} at \SI{1.5}{\metre\per\second} and from \SI{0.319}{\metre} to \SI{0.162}{\metre} at an out-of-distribution \SI{3.9}{\metre\per\second}. The framework provides a basis for hardware-in-the-loop and flight-test studies.

0.29

When Your State Estimator Has Lost The Plot: Detecting Estimator Failures Via Spectral Analysis

cs.RO ·2026-08-11 ·Christian Lanegger, Helen Oleynikova, Roland Siegwart, Michael Pantic
similarity 0.57
Abstract

Reliable onboard state estimation is essential for safe robotic operation, yet unmodeled disturbances, such as sensor aliasing or out-of-distribution noise, still cause estimators to degrade or fail completely. While many methods aim to improve estimator robustness, only a few provide introspective mechanisms to assess estimate quality. Existing uncertainty measures, such as covariances, rely on idealized assumptions and tend to be overconfident, and more recent data-driven approaches are typically tied to their training data distributions. We propose a sensor-agnostic introspective method that assesses estimator health by analyzing the frequency-domain power distribution of recent velocity estimates. The method is evaluated using outdoor flight data from an aerial robot running visual-inertial, LiDAR-inertial, and radar-inertial odometry. The dataset includes multiple estimator failures, enabling analysis of several frequency-domain indicators, such as signal power, spectral bandwidth, and entropy. We observe consistent spectral power differences between healthy and degraded estimates, allowing detection of 51%-58% of labeled failures with 60%-84% precision across three fundamentally different state estimation frameworks. Our results show that even a simple frequency-domain analysis of a state estimator's output can serve as a lightweight introspective tool to complement existing robustness techniques in real-world robotic deployments, and opens promising avenues for future investigation.

0.04

Pressure Drop: Gravity Vector Estimation from a Distributed Barometric Pressure Sensor Array

cs.RO ·2026-11-17 ·William Dubois, Nicolas Lauzon, Johann Laconte, François Pomerleau
similarity 0.55
Abstract · 8 pages, 6 figures, submitted to IEEE ICRA 2027

While gravity is often used in mobile robotics as a global constraint for Simultaneous Localization and Mapping (SLAM) algorithms, most estimation methods rely on indirect observation of the gravity vector. In this paper, we propose the use of altimeter measurements to directly observe the direction of the gravity vector. We provide a theoretical evaluation of the estimation noise and validate it through extensive experimental data, along with an evaluation of the impact of intersensor distance on our gravity vector estimates. Experimental results demonstrate that a median error of $0.87^\circ$ on the tilt estimation can be achieved with our system in semi-static scenarios. Furthermore, we demonstrate the potential of this approach by comparing it with state-of-the-art methods based on Inertial Measurement Units (IMUs). We highlight that we achieve similar performance to that of IMU-based systems in highly dynamic scenarios and even outperform in specific cases of accelerometer measurement saturation. Finally, an additional experiment shows the potential use within a robotic system through the integration into an Iterative Closest Point (ICP) algorithm.

0.25

Observation Quality in DSM-Assisted Aerial Localization: A Benchmark and Base-Anchored Uncertainty Calibration

cs.CV ·2026-10-13 ·Pengyu Yin, Jie Pan, Junxiang Tan, Mengqi Fu, Kun Cheng +1 more
benchmark similarity 0.55
Abstract · 15 pages, 7 figures, 7 tables. Submitted to IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing

Aerial map matching provides position observations for navigation, but a position error alone does not determine how an observation should be weighted. We define five benchmark tasks: position availability and agreement, grouped error structure, predictive uncertainty, controlled updates, and temporal accumulation. We use digital-surface-model-assisted localization to test whether base-anchored uncertainty calibration improves the weighting of unchanged position estimates. The method combines propagated image and map sensitivities with the second moment of a compact configuration subset relative to the reported position. Scale is fitted using separate position references without local surface-height ground truth. Thirteen covariance models are evaluated on two held-out query sets from locations represented in the calibration data. Using reference residuals, we compare the method with a constant full-matrix baseline. With all localization failures included, the method reduces the normalized position-update risk, averaged equally across locations, by 7.70% on 728 conditions and 5.46% on a separate 142 conditions under an independent prior. On the primary set, the equal-location average negative log likelihood on reference residuals improves by 2.571 nat. At these seen locations, exploratory base-only quality calibration and conditional-addition controls leave the incremental update benefit of configuration disagreement unresolved. Navigation benefit and real temporal accumulation remain untested.

0.23