CS Paper Radar

DR-IPC: Disturbance-Resilient Integrated Planning and Control for LiDAR-Based Quadrotor Navigation

Peng Liu, Jingyan Wang, Qipeng Ye, Wen Li, Jinya Su, Zuo Wang, Shihua Li, Yunda Yan

cs.RO eess.SY ·submitted 2026-10-02 16:16 UTC · v1

Abstract

LiDAR-based quadrotor navigation in cluttered environments remains challenging under external disturbances, particularly when obstacle-aware motion generation and disturbance-rejection control are handled in separate layers. This article presents disturbance-resilient integrated planning and control (DR-IPC), which combines lightweight path guidance with nonlinear model predictive control (NMPC) to directly generate angular velocity and thrust. An interconnected extended Kalman filter and nonlinear disturbance observer jointly provide filtered state estimates and reconstructed disturbances for NMPC prediction. The resulting formulation unifies nonlinear quadrotor dynamics, actuator constraints, local motion generation, and penalised safe-flight-corridor residuals without requiring a separate trajectory-optimization stage. Gazebo and MARSIM simulations, together with indoor and outdoor experiments, validate DR-IPC under wind, suspended payloads, narrow passages, ball impacts and reactive avoidance of a dynamic obstacle. In multi-goal navigation with disturbances, DR-IPC increases the number of completed missions from 1/10 to 9/10 in Gazebo and reduces the altitude RMSE from 0.34 to 0.01 m in experiments. The complete system operates onboard at 100 Hz. Supplementary videos are available on the project page https://drpp316.github.io/DR-IPC-Page/, and the source code will be released.

Comment
11 pages, 16 figures, 7 tables

Closest papers

Nearest neighbours by meaning across the whole index.

NMPP: Nonlinear Model Predictive Planning for Agile UAV Flight in Cluttered Environments

cs.RO ·2026-10-06 ·Ondřej Procházka, Juraj Pauko, Robert Pěnička, Martin Saska
similarity 0.67
Abstract

Flying a quadrotor through a cluttered environment requires not only planning a collision-free reference trajectory based on perceived obstacles, but the reference also needs to be dynamically feasible and within the actuation limits of the vehicle, so that the controller can track it precisely. Existing methods either optimize a smooth polynomial inside a convex corridor, which limits agility, or treat obstacles as soft costs traded against tracking performance. We propose a Nonlinear Model Predictive Planning (NMPP) that imposes perceived obstacles as hard geometric constraints and hands a full-state reference to an obstacle-blind SE(3) controller. Our planner achieves a 58-67 % lower position RMSE than a linear Model Predictive Control trajectory planner and a 41-70 % lower RMSE than a polynomial trajectory planner. It also completes all forest flights with up to 9.5 m/s speed without collisions, and achieves 86 % flight success rate under a more aggressive speed profile where a state-of-the-art planner has only 26 % success rate. The real-world deployment showed reliable execution flying up to 5.5 m/s in an unknown cluttered environment.

0.19

ISB-NMPC: Interception-Oriented Spherical-Bearing Nonlinear Model Predictive Control for Quadrotors

cs.RO ·2026-10-26 ·Li Hong, Linkai Liu, Xiangyu Ren, Shuli Lv, Chen Min +4 more
code/data similarity 0.67
Abstract · 9 pages, 10 figures, and 1 table. Submitted to IEEE/ASME Transactions on Mechatronics

Quadrotor interceptors equipped with strapdown cameras offer a low-cost solution for physically countering unauthorized UAVs. However, this configuration inherently couples vehicle maneuvering and camera pointing, creating a conflict between rapid closing and maintaining target visibility. We present interception-oriented spherical-bearing nonlinear model predictive control (ISB-NMPC), which couples spherical-bearing prediction with nonlinear quadrotor dynamics to jointly optimize target-directed closing motion and visibility. An attitude-compensated extended Kalman filter on S^2 estimates target bearing motion, compensates for perception delay, and predicts target bearings to guide scale-adaptive detection. Across 30 paired simulation trials, ISB-NMPC achieves an interception success rate of 86.7%, the highest among the evaluated controllers, with a mean per-trial target-visible time of 99.11%. Outdoor flights demonstrate acquisition of a 30 cm target at approximately 150 m, with interceptor speed reaching 17 m/s in the long-range flight and approximately 14 m/s while pursuing a quadrotor-towed maneuvering target. The software and hardware are open source at https://github.com/HOLYNOTBAD/ISB-NMPC and https://github.com/HOLYNOTBAD/holydrone, respectively.

0.32

Real-Time Disturbance-Aware Koopman Model Predictive Control for Quadrotors in Spatially Varying Winds

cs.RO eess.SY ·2026-10-20 ·Stella Kombo, Masih Haseli, Alejandro A. Stefan-Zavala, Peter I. Renn, Morteza Gharib +1 more
similarity 0.66
Abstract

Reliable quadrotor flight in disturbed environments requires predictive models that remain accurate as unmodeled aerodynamic effects change during deployment. We introduce a disturbance-aware Koopman Control Family (DA-KCF) framework that preserves an offline-identified nominal model while learning only a disturbance-induced correction online. A reference-dependent KCF is first learned from simulation data and calibrated using limited hardware data. During deployment, the nominal KCF remains fixed while a lightweight residual ensemble learns a low-dimensional disturbance correction from causal state-command-state transitions. The Adaptive DA-KCF model is incorporated into MPC, where disturbance corrections are evaluated along the prediction horizon to optimize position and yaw references sent to the onboard stabilizing controller. Hardware experiments on a nano-quadrotor under uniform wind and a spatially varying wake demonstrate that online adaptation improves multi-step prediction and trajectory tracking as disturbance-induced model mismatch increases, while satisfying real-time control requirements.

0.18

Integrated Guidance and Control of a Mother-Child UAV-UGV System for Cooperative Missions

cs.RO ·2026-09-17 ·Aashish Sahu, R. Prasanth Kumar
highly cited similarity 0.66
Abstract · 27 pages, 10 figures

Autonomous recovery of a small multirotor onto a hovering multirotor carrier differs from recovery onto ground or shipborne platforms because the recovery surface is itself an actively controlled, thrust-limited aerial vehicle. This paper presents a field-validated autonomy framework for a heterogeneous rover-mothership-child system executing rover supervision, mothership transit, child deployment and sortie, autonomous return, aerial recovery, and synchronized descent. The recovery stack combines jerk-bounded reference generation, disturbance-observer-augmented planar tracking, feasibility-aware vertical control, a discrete-time barrier-based safety filter for relative vertical geometry, and communication-aware carrier-state prediction. The contribution is the coordinated system-level integration of these methods for recovery onto a hovering multirotor and its full-scale outdoor validation. The framework is implemented on a PX4-ROS 2 architecture using RTK-enabled GNSS, IMU, and barometric fusion, with mothership-side 1D lidar used only as an auxiliary near-contact cue. RTK-fixed positioning was maintained throughout testing. Across 20 outdoor cooperative missions, 17 successfully completed deployment, sortie, and recovery, giving an observed mission success rate of 85%. For successful recoveries, mean terminal-alignment time was 6.3 s, mean planar alignment error at acceptance was 0.18 m, maximum terminal planar deviation was 0.32 m within a 0.40 m capture radius, and minimum logged relative vertical separation during coupled descent was 0.41 m. Mothership planar station-keeping RMS error was 0.25 m. The three unsuccessful trials occurred at different mission stages and are analyzed separately. Results demonstrate practical autonomous aerial recovery within the tested outdoor operating envelope.

0.57

Robust Variable-Horizon MPC for Landing a Multirotor UAV on a Moving Platform

eess.SY ·2026-09-28 ·Sander Doodeman, Niels Berkers, Paula Chanfreut, Elena Torta, Duarte Antunes
similarity 0.66
Abstract · Submitted to ICRA 2027

Landing a multirotor Unmanned Aerial Vehicle (UAV) on a moving platform is challenging because a UAV is underactuated and the desired landing state is generally a non-equilibrium state. Shrinking- and variable-horizon approaches are promising for reaching such non-equilibrium targets, but often lack robustness to disturbances. Robust Variable-Horizon Model Predictive Control (VH-MPC) addresses this limitation but is computationally complex for a high-dimensional system such as a multirotor UAV. This paper presents a computationally efficient robust Variable-Horizon MPC method for reaching non-equilibrium targets under bounded disturbances. The online horizon search is restricted to a neighborhood of the previously selected horizon, while maintaining recursive feasibility under bounded disturbances. A fixed robust positively invariant tube provides horizon-independent constraint tightening. By exploiting the differential flatness property of a UAV, this approach is applied to a decoupled linearized system, enabling real-time implementation on an onboard Raspberry Pi 5 at 20 Hz. Simulations show that restricting the horizon search substantially reduces computation with limited impact on the objective, while real-time Gazebo simulations demonstrate the robustness of the method. Physical experiments demonstrate successful landing of a multirotor UAV on a moving Stewart platform.

0.13

Nonlinear Model Predictive Control for Trajectory Tracking of Differentially Flat Fixed-Wing Aerial Systems

cs.RO ·2026-08-21 ·Nishanth Bobbili, Pratyaksh Rao, Luca Morando, Luca Masci, Giuseppe Loianno
similarity 0.65
Abstract

Planning and control of fixed-wing Unmanned Aerial Vehicles (UAVs) are challenging due to nonlinear dynamics, aerodynamic limits, and environmental disturbances. Differential flatness offers a principled way to generate fast, feasible trajectories, but its use has largely been confined to model-free controllers, which lack predictive capabilities and demand tuning. In this paper, we propose a unified framework that integrates differential flatness-based trajectory generation with Nonlinear Model Predictive Control (NMPC), combining computationally efficient planning with predictive, constraint-aware control. To further improve robustness, we introduce a wind-aware sampling strategy embedded within the NMPC framework, enabling the generation of dynamically feasible reference trajectories that proactively account for wind disturbances while strictly enforcing aerodynamic and control input constraints. We validate the proposed framework through extensive simulations and real-world flight experiments, demonstrating improved tracking accuracy and robustness for complex trajectories, particularly when using the proposed wind-aware sampling strategy under strong wind conditions.

0.21

Learning-Based Dynamic Obstacle Avoidance for a UAV Using Only Three Range Sensors

cs.RO eess.SY ·2026-09-13 ·Mohammad Reza Ranjbar Divkoti, A. Pedro Aguiar
similarity 0.65
Abstract

We present a learning-based approach to kinodynamic online motion planning for an Unmanned Aerial Vehicle (UAV) operating at a fixed altitude in unknown dynamic environments, where real-time avoidance of both static and dynamic obstacles must be achieved under conditions of extreme partial observability. The UAV is controlled with a single degree of freedom (yaw only), resulting in constrained, nonholonomic motion similar to fixed-wing platforms. The proposed framework integrates a behavior grid map representation with Deep Reinforcement Learning (DRL), using Proximal Policy Optimization (PPO) for stable policy learning in continuous control. The key idea is the co-design of a state representation and control policy that enables reliable navigation using only three low-cost directional range sensors, without reliance on dense sensing modalities such as LiDAR or vision-based systems. The behavior grid map dynamically aggregates sparse measurements into a structured local representation that supports real-time decision-making for obstacle avoidance and target reaching. Extensive simulations across environments of varying sizes and obstacle densities demonstrate that the proposed standard and enhanced methods achieve higher success rates than PPO variants and Model Predictive Control (MPC) (94\% vs. 79--90\% in small-scale high-congestion scenarios, and 83\% vs. 62--71\% in large-scale high-congestion scenarios), while maintaining real-time performance. Real-world experiments across four scenarios further confirm practical feasibility, with consistent target-reaching behaviour and no collisions under the tested conditions.

0.23

VIRGA: Virtual-Agent-Intermediated Riemannian Geometry for Active-Sensing Air-Ground Coordination

cs.RO ·2026-09-18 ·Fenghe Guo, Runjie Shen, Chenyang Sun, Junrui Zhang
similarity 0.63
Abstract

Air-ground autonomy becomes harder when the unmanned aerial vehicle (UAV) must remain observable by a gimbal light detection and ranging (LiDAR) mounted on the unmanned ground vehicle (UGV). The platforms must avoid dynamic obstacles while coordinating heterogeneous motion, limited sensing, and changing task initiative within one closed loop. This paper presents VIRGA, a neural geometric coordination framework that turns dual-LiDAR observations into bounded source-specific Riemannian fields and couples them through a virtual agent with reciprocal elastic feedback. Platform-aware execution maps convert the shared coordination reference into feasible UAV, UGV, and gimbal commands while enforcing active-observation safeguards. Evaluation against three complementary baselines reveals distinct limitations. An adapted Ray-RMP controller provides the fastest Riemannian response but produces insufficient clearance in the coupled air-ground task. A dense analytical Riemannian field improves geometric avoidance, yet its high evaluation cost prevents stable field-of-view maintenance. An adapted ColAG controller achieves the lowest latency but still incurs safety and observability violations. VIRGA completes all paired warehouse conditions safely, while a long-range cave stress test without retraining demonstrates sustained coordination in irregular and confined geometry. Ablations confirm contributions from online geometric evaluation, virtual-agent mediation, and reciprocal feedback.

0.27