CS Paper Radar

Integrated Guidance and Control of a Mother-Child UAV-UGV System for Cooperative Missions

Aashish Sahu, R. Prasanth Kumar

cs.RO ·submitted 2026-09-17 15:10 UTC · v1
highly cited

Abstract

Autonomous recovery of a small multirotor onto a hovering multirotor carrier differs from recovery onto ground or shipborne platforms because the recovery surface is itself an actively controlled, thrust-limited aerial vehicle. This paper presents a field-validated autonomy framework for a heterogeneous rover-mothership-child system executing rover supervision, mothership transit, child deployment and sortie, autonomous return, aerial recovery, and synchronized descent. The recovery stack combines jerk-bounded reference generation, disturbance-observer-augmented planar tracking, feasibility-aware vertical control, a discrete-time barrier-based safety filter for relative vertical geometry, and communication-aware carrier-state prediction. The contribution is the coordinated system-level integration of these methods for recovery onto a hovering multirotor and its full-scale outdoor validation. The framework is implemented on a PX4-ROS 2 architecture using RTK-enabled GNSS, IMU, and barometric fusion, with mothership-side 1D lidar used only as an auxiliary near-contact cue. RTK-fixed positioning was maintained throughout testing. Across 20 outdoor cooperative missions, 17 successfully completed deployment, sortie, and recovery, giving an observed mission success rate of 85%. For successful recoveries, mean terminal-alignment time was 6.3 s, mean planar alignment error at acceptance was 0.18 m, maximum terminal planar deviation was 0.32 m within a 0.40 m capture radius, and minimum logged relative vertical separation during coupled descent was 0.41 m. Mothership planar station-keeping RMS error was 0.25 m. The three unsuccessful trials occurred at different mission stages and are analyzed separately. Results demonstrate practical autonomous aerial recovery within the tested outdoor operating envelope.

Comment
27 pages, 10 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Multimodal Sensor-Gated Mid-Air Launch and Vision-Based Recovery of a Child UAV on a Hovering Mothership Drone

cs.RO ·2026-10-11 ·Aashish Sahu, R. Prasanth Kumar
similarity 0.72
Abstract · 4 pages, 5 figures, 2 tables

Launching a micro unmanned aerial vehicle (UAV) from a hovering carrier and recovering it in flight requires reliable confirmation that the child is securely seated before the carrier is allowed to descend. This is challenging because vision provides relative guidance but does not directly indicate load transfer, and a downward-facing camera can lose its fiducial near touchdown. This letter presents a mothership-child quadrotor system in which mission transitions are gated by complementary nonvisual sensing. An upward-facing single-beam LiDAR on the recovery deck provides a binary occupancy state using hysteresis and a debounce interval derived from the child's occluding footprint and crossing speed; real-time kinematic (RTK) positioning conditions the carrier hover; and carrier thrust provides a proprioceptive indication of load transfer. In ten outdoor missions using an F450-class mothership and a Q250-class child with camera-guided recovery, nine completed successfully while RTK-fixed positioning was maintained through release and capture. A complementary MuJoCo study of fully autonomous fiducial-based recovery achieved touchdown 0.077 m from the deck center, while marker detection was lost within the final approximately 0.2 m above the docked configuration. In simulation, carrier thrust changed by -17.0 N at release and +17.3 N at capture, agreeing within 6% with the child's 18.0 N hover thrust. The results support a sensing architecture in which vision guides the approach, while range and proprioceptive information corroborate the final docking decision.

0.20

RTK-Vision PPO for Autonomous Micro UAV Recovery on an Airborne Carrier

cs.RO ·2026-09-17 ·Aashish Sahu, R Prasanth Kumar
similarity 0.68
Abstract · 9 pages, 6 figures

Autonomous recovery of a micro unmanned aerial vehicle (UAV) onto a moving airborne carrier enables reusable deploy-mission-recover operation, but couples long-range rendezvous, close-range perception, carrier motion, aerodynamic interaction, and a discontinuous contact event. This paper presents an RTK-vision-guided reinforcement-learning framework in which a child UAV is physically transported by a larger carrier, takes off from the carrier while airborne, executes an independent sortie, returns to the carrier's current position, redocks, and subsequently descends with the carrier. Both vehicles carry RTK-GNSS, and the carrier continuously shares its navigation state with the child. Near the recovery deck, RTK remains active while a downward-facing camera with a fiducial marker detector provides marker-relative alignment cues. A proximal policy optimization (PPO) policy governing the terminal recovery phase is trained in a physics-based MuJoCo simulation environment with explicit sensor noise models, an aerodynamic disturbance surrogate, and marker-latency randomization, then transferred to hardware. PX4 retains low-level stabilization, and a deterministic safety gate authorizes descent independently of the learned policy. The PPO checkpoint achieves 99.55% success over 2,000 held-out randomized terminal episodes, compared with 78.4% for a tuned PD baseline under identical conditions, with a median planar terminal error of 6.62 cm. Across 14 outdoor trials, the full mission succeeds in 13 trials (92.9%), spanning both near-region recovery and recovery after the carrier translates away from the release point. The results demonstrate a complete autonomous aerial deployment-and-recovery cycle rather than an isolated landing maneuver, establishing a practical basis for reusable carrier-child operation in inspection, surveillance, and mobile-logistics applications.

0.43

DR-IPC: Disturbance-Resilient Integrated Planning and Control for LiDAR-Based Quadrotor Navigation

cs.RO eess.SY ·2026-10-02 ·Peng Liu, Jingyan Wang, Qipeng Ye, Wen Li, Jinya Su +3 more
similarity 0.66
Abstract · 11 pages, 16 figures, 7 tables

LiDAR-based quadrotor navigation in cluttered environments remains challenging under external disturbances, particularly when obstacle-aware motion generation and disturbance-rejection control are handled in separate layers. This article presents disturbance-resilient integrated planning and control (DR-IPC), which combines lightweight path guidance with nonlinear model predictive control (NMPC) to directly generate angular velocity and thrust. An interconnected extended Kalman filter and nonlinear disturbance observer jointly provide filtered state estimates and reconstructed disturbances for NMPC prediction. The resulting formulation unifies nonlinear quadrotor dynamics, actuator constraints, local motion generation, and penalised safe-flight-corridor residuals without requiring a separate trajectory-optimization stage. Gazebo and MARSIM simulations, together with indoor and outdoor experiments, validate DR-IPC under wind, suspended payloads, narrow passages, ball impacts and reactive avoidance of a dynamic obstacle. In multi-goal navigation with disturbances, DR-IPC increases the number of completed missions from 1/10 to 9/10 in Gazebo and reduces the altitude RMSE from 0.34 to 0.01 m in experiments. The complete system operates onboard at 100 Hz. Supplementary videos are available on the project page https://drpp316.github.io/DR-IPC-Page/, and the source code will be released.

0.25

VIRGA: Virtual-Agent-Intermediated Riemannian Geometry for Active-Sensing Air-Ground Coordination

cs.RO ·2026-09-18 ·Fenghe Guo, Runjie Shen, Chenyang Sun, Junrui Zhang
similarity 0.66
Abstract

Air-ground autonomy becomes harder when the unmanned aerial vehicle (UAV) must remain observable by a gimbal light detection and ranging (LiDAR) mounted on the unmanned ground vehicle (UGV). The platforms must avoid dynamic obstacles while coordinating heterogeneous motion, limited sensing, and changing task initiative within one closed loop. This paper presents VIRGA, a neural geometric coordination framework that turns dual-LiDAR observations into bounded source-specific Riemannian fields and couples them through a virtual agent with reciprocal elastic feedback. Platform-aware execution maps convert the shared coordination reference into feasible UAV, UGV, and gimbal commands while enforcing active-observation safeguards. Evaluation against three complementary baselines reveals distinct limitations. An adapted Ray-RMP controller provides the fastest Riemannian response but produces insufficient clearance in the coupled air-ground task. A dense analytical Riemannian field improves geometric avoidance, yet its high evaluation cost prevents stable field-of-view maintenance. An adapted ColAG controller achieves the lowest latency but still incurs safety and observability violations. VIRGA completes all paired warehouse conditions safely, while a long-range cave stress test without retraining demonstrates sustained coordination in irregular and confined geometry. Ablations confirm contributions from online geometric evaluation, virtual-agent mediation, and reciprocal feedback.

0.27

Equivalent-Agent Guidance for Cooperative UAV Payload Transportation

eess.SY ·2026-09-16 ·Saurabh Kumar, Shashi Ranjan Kumar, Abhinav Sinha
similarity 0.62
Abstract

This paper develops a guidance framework for cooperative transportation of a rigid payload by two uncrewed aerial vehicles (UAVs) to stationary and maneuvering landing platforms. A virtual equivalent-agent representation is first introduced to describe the translational motion of the rigidly coupled UAV-payload system, allowing the transportation problem to be formulated in terms of relative range and line-of-sight dynamics with respect to the landing platform. A geometric analysis establishes the terminal feasibility conditions for payload delivery. In particular, an arbitrary prescribed approach angle can be achieved for a stationary platform, whereas successful delivery to a maneuvering platform with zero relative velocity requires terminal velocity and heading angle synchronization and consequently a zero landing angle. Leveraging this framework, a robust fixed-time sliding mode guidance strategy is developed to regulate both relative range and line-of-sight dynamics. A separate link-orientation controller and control allocation scheme is presented to map virtual equivalent agent commands to the individual UAV's control inputs. The proposed strategy guarantees convergence to the desired landing configuration within a uniformly bounded time, independent of initial engagement geometries, while explicitly accommodating uncertainties arising from target maneuvers. Numerical simulations demonstrate accurate delivery under different terminal approach angles and platform maneuvers, while processor-in-the-loop implementation on a Raspberry Pi demonstrates that the guidance algorithm satisfies the real-time computational requirements. Nonetheless, a comparative analysis shows that the proposed framework achieves better tracking accuracy and faster sliding surface convergence while requiring significantly less control energy from each UAV.

0.22

SwarmNxt: Open-source Software-Hardware Platform for Fast and Agile Aerial Swarms

cs.RO ·2026-09-10 ·Charbel Toumieh, Niel Mistry, Benjamin Jarvis, Simon Jeger, Peize Liu +2 more
code/data similarity 0.62
Abstract

Aerial robot swarms have the potential to transform time-critical safety, security, and search-and-rescue operations. By coordinating multiple robots, they can rapidly survey disaster sites, map collapsed or GPS-denied environments, and search cluttered areas faster than a single robot, reducing response times and minimizing risks to first responders. Realizing this potential, however, requires robust autonomous swarm navigation, which remains an active research challenge. Progress is further constrained by existing platforms, as commercial drones are often closed-source or lack the onboard computational resources needed for agile, vision-based collective flight. Moreover, developing, deploying, and maintaining software across multiple aerial robots requires significant engineering effort. To address these challenges, we present SwarmNxt, an open-source software platform built on the open-source OmniNxt drone hardware. SwarmNxt provides an end-to-end toolkit, including detailed hardware assembly instructions with a video tutorial, automation tools for parallel software deployment and swarm-wide updates, and a ROS 2-based framework for autonomous navigation. The platform integrates state-of-the-art control, planning, and depth estimation into a single ROS 2 multi-agent system, providing an open research infrastructure for physical swarm experimentation. We validate SwarmNxt through two real-world experiments: a six-drone swarm performing decentralized planning with high-speed inter-drone collision avoidance, and a four-drone swarm executing collective flight with onboard depth estimation in an obstacle-filled environment. Both experiments were run indoors with global position from external motion capture; perception, planning, and control run onboard.

0.33

Towards safe and optimal flight: Viability Kernel MPC for Fully Actuated Multirotor

cs.RO eess.SY ·2026-08-26 ·Massimiliano Bertoni, Alberto Piccina, Gianni Lunardi, Elias Fontanari, Andrea Del Prete +2 more
similarity 0.61
Abstract

Industrial aerial robotics demands safety guarantees for navigation in unstructured environments while optimizing performance and computational efficiency. This paper presents a method for generating safe pose trajectories for fully actuated multirotors within a Model Predictive Control (MPC) framework, leveraging both viability theory and data-driven methods. Obstacle avoidance is enforced through dynamically computed axis-aligned bounding boxes, providing formal safety guarantees without exhaustive offline reachability analysis. Numerical simulations on a fully actuated tilted hexarotor validate the approach, demonstrating successful navigation in cluttered environments with real-time computational performance.

0.08

Vector Field Following for Quadrotors via Reduced Attitude Representations with Applications to Safety-Critical Control

eess.SY ·2026-10-05 ·Mohammad Mirtaba, Max H. Cohen
similarity 0.61
Abstract

Vector field tracking for quadrotors provides a systematic framework for specifying complex behaviors at the translational level and transferring them to the full vehicle dynamics. Objectives such as safety, for example, can be encoded into a low-dimensional vector field, which is then embedded into the full dynamics through appropriate tracking conditions. The development of such tracking controllers for quadrotors can be facilitated by the fact that their translational dynamics depend only on the thrust direction and are independent of the vehicle's heading. Thus, reduced-attitude representations, leveraging the geometry of the unit sphere, provide a natural framework for vector field tracking on quadrotors. In this work, we propose two vector field tracking controllers for quadrotors using reduced-attitude representations based on dynamic extension and geometric control, respectively. Next, we illustrate how safety can be encoded into the desired vector field using control barrier functions and enforced for the full system. The effectiveness of the proposed approaches is demonstrated via simulations and experimental flight tests.

0.15