CS Paper Radar

Vector Field Following for Quadrotors via Reduced Attitude Representations with Applications to Safety-Critical Control

Mohammad Mirtaba, Max H. Cohen

eess.SY ·submitted 2026-10-05 16:24 UTC · v1

Abstract

Vector field tracking for quadrotors provides a systematic framework for specifying complex behaviors at the translational level and transferring them to the full vehicle dynamics. Objectives such as safety, for example, can be encoded into a low-dimensional vector field, which is then embedded into the full dynamics through appropriate tracking conditions. The development of such tracking controllers for quadrotors can be facilitated by the fact that their translational dynamics depend only on the thrust direction and are independent of the vehicle's heading. Thus, reduced-attitude representations, leveraging the geometry of the unit sphere, provide a natural framework for vector field tracking on quadrotors. In this work, we propose two vector field tracking controllers for quadrotors using reduced-attitude representations based on dynamic extension and geometric control, respectively. Next, we illustrate how safety can be encoded into the desired vector field using control barrier functions and enforced for the full system. The effectiveness of the proposed approaches is demonstrated via simulations and experimental flight tests.

Closest papers

Nearest neighbours by meaning across the whole index.

Safety-Critical Quadrotor Navigation Using Fourth-Order Control Barrier Functions with Full Nonlinear Quadrotor Dynamics

cs.RO ·2026-10-10 ·Yanze Liu, Yaşar İdikut, Dhruv Madhusudan Agrawal, Wei Xiao, Guanrui Li
similarity 0.67
Abstract

Safety-critical quadrotor navigation in cluttered environments typically relies on hierarchical architectures in which a high-level safety filter modifies position references that are then tracked by a separate attitude controller. However, this separation can create a mismatch between translational safety objectives and attitude evolution. To address this gap, we propose a safety controller based on fourth-order control barrier functions (CBFs) that explicitly incorporates the full nonlinear quadrotor dynamics, including attitude dynamics and torque-level actuation. Furthermore, we apply the integral high-order CBF technique to resolve the mixed-relative degree issue in the derived constraint formulation. The resulting formulation enforces obstacle-avoidance constraints while optimizing control torques, granting the safety layer direct authority over attitude behavior and eliminating the hierarchical disconnect inherent in reference-tracking safety filters. We validate the approaches in both high-fidelity simulation and real-world flight experiments, demonstrating reliable constraint satisfaction and successful obstacle avoidance. These results suggest that torque-level high-order CBFs provide a practical pathway to provably safer quadrotor navigation under full rigid-body dynamics.

0.12

Safe whole-body backstepping control for quadcopter path-following

eess.SY ·2026-08-18 ·Arthur H. D. Nunes, Arthur Da C. Vangasse, Guilherme V. Raffo, Vinicius M. Gonçalves, Luciano C. A. Pimenta
similarity 0.66
Abstract

This paper presents a novel whole-body Backstepping control strategy for safe quadcopter path-following. The proposed approach introduces an integrated control scheme that combines a translational guidance controller with a rigid-body attitude controller. To guarantee asymptotic path convergence, the method utilizes a nominal Integrated Guidance and Control (IGC) based on Artificial Vector Fields (AVF). To ensure reactive safety and collision avoidance, the control law is modified using a smooth distance function within the High-Order Control Barrier Function (HOCBF) framework. The quadcopter dynamics are modeled using quaternion algebra to represent position, velocity, and attitude. By combining the Backstepping approach with HOCBF, the controller guarantees that the vehicle avoids obstacle sets while successfully converging to the target path when unobstructed. The proposed methodology is validated through software-in-the-loop simulations and real-world experimental results using the Crazyflie platform.

0.20

CALOS: Control-Affine Lyapunov On-manifold Safety Layer for Safe Deep Reinforcement Learning for Quadrotors

cs.RO cs.AI ·2026-09-15 ·Fabrizio Cesareo, Sebastiano Mengozzi, Nicola Mimmo, Andrea Acquaviva
similarity 0.64
Abstract

Deep Reinforcement Learning has demonstrated remarkable capability in quadrotor control, yet learned policies offer no guarantee of respecting safety constraints during training or deployment. We present CALOS (Control-Affine Lyapunov On-manifold Safety), a runtime safety layer that enforces attitude constraints on a quadrotor without modifying the underlying learning algorithm. CALOS formulates four tilt-angle inequalities and a Lyapunov descent condition as a single quadratic program whose solution is the minimum-norm correction to the nominal torque output of the policy. The quadratic program is solved exactly via active-set enumeration over the three-dimensional torque space, with a computational cost low enough to enforce constraints in real time across thousands of parallel simulation environments, as required by modern massively parallel Deep Reinforcement Learning training. Evaluated on trajectory-tracking tasks in NVIDIA Isaac Lab, CALOS reduces lateral tracking error by 55-60% relative to an unconstrained Proximal Policy Optimization baseline while achieving zero attitude-constraint violations on the training trajectory. By restricting exploration to safe regions of the state space, the safety layer also accelerates training convergence and improves data efficiency without producing suboptimal policies.

0.19

Safety-Critical Control for Quadrotor UAVs via Decentralized Navigation Functions

eess.SY math.OC ·2026-08-13 ·Omayra Yago Nieto, Alexandre Anahory Simoes, Leonardo Colombo
similarity 0.63
Abstract

We study safety-critical control for teams of quadrotor UAVs driven by decentralized navigation functions under learned model uncertainty. These functions generate fully actuated translational reference forces, while quadrotors can only produce thrust along their body-fixed vertical axes. We construct a thrust-attitude implementation of the induced navigation forces and quantify its error with respect to the fully actuated reference dynamics. An aggregated robust HOCBF-QP safety filter minimally modifies the nominal thrusts while guaranteeing pairwise collision avoidance with high probability.

0.34

Practical Complete Tracking Through Gimbaled Unidirectional Actuation with Application to Multirotor UAVs

eess.SY ·2026-10-22 ·Ian Willebeek-LeMair, Craig Woolsey
similarity 0.63
Abstract · 16 pages, 10 figures

This paper addresses the problem of practical tracking control for robotic vehicles with gimbaled unidirectional actuators, with special application to multirotor unmanned aerial vehicles. A widely recognized obstacle to tracking control for multirotors is the free-fall singularity --- when a multirotor is commanded to free fall, the vehicle's target attitude becomes undefined. This singularity is a pathology pertinent to all robotic vehicles with gimbaled unidirectional actuators. This paper considers the general theoretical problem for vehicles with gimbaled actuators. Starting from a baseline robust controller that assumes unconstrained inputs, we redesign the control law to be compatible with the gimbaled actuator. This is accomplished by driving the output of the gimbaled actuator to a ball centered at the target input value. The baseline controller's tracking guarantees are recovered in a practical sense. We apply our results to synthesize a global practical complete position tracking controller for multirotor unmanned aerial vehicles. The theory is demonstrated in simulation.

0.23

Observer-Based Robust Control for an Aerial Manipulator System under Unknown External Disturbances

eess.SY ·2026-09-07 ·Mayank Pandey, Sneha Gajbhiye
similarity 0.61
Abstract

This paper addresses the mathematical modeling and control of an aerial manipulator system comprising a quadrotor as the uncrewed aerial vehicle and a robotic arm as the manipulator. The dynamic model is established by identifying the overall center-of-mass velocity and the system's orientation as constraints, yielding a simplified, two-decoupled subsystems: a locked (overall translation) subsystem and a shape-space (actuation or overall rotation) subsystem, both subjected to external disturbances. Since the system is mechanically coupled, a critical challenge arises where constant bounded disturbances in the first subsystem manifest as time-varying, state-dependent disturbances in the second subsystem. Given that the quadrotor is inherently unstable, the movement of the robotic manipulator (RM) during flight can further jeopardize the stability of the entire QRM system if these disturbances and coupling effects are not effectively managed. To address this, we present a continuous nonlinear disturbance observer-based feedback control law, which enables the independent control of each subsystem while systematically eliminating cross-coupling effects. The efficacy of the proposed controller is validated through multiple simulations emulating practical operating conditions, thereby substantiating its real-world applicability and highlighting the core contributions of this work.

0.11

Integrated Guidance and Control of a Mother-Child UAV-UGV System for Cooperative Missions

cs.RO ·2026-09-17 ·Aashish Sahu, R. Prasanth Kumar
highly cited similarity 0.61
Abstract · 27 pages, 10 figures

Autonomous recovery of a small multirotor onto a hovering multirotor carrier differs from recovery onto ground or shipborne platforms because the recovery surface is itself an actively controlled, thrust-limited aerial vehicle. This paper presents a field-validated autonomy framework for a heterogeneous rover-mothership-child system executing rover supervision, mothership transit, child deployment and sortie, autonomous return, aerial recovery, and synchronized descent. The recovery stack combines jerk-bounded reference generation, disturbance-observer-augmented planar tracking, feasibility-aware vertical control, a discrete-time barrier-based safety filter for relative vertical geometry, and communication-aware carrier-state prediction. The contribution is the coordinated system-level integration of these methods for recovery onto a hovering multirotor and its full-scale outdoor validation. The framework is implemented on a PX4-ROS 2 architecture using RTK-enabled GNSS, IMU, and barometric fusion, with mothership-side 1D lidar used only as an auxiliary near-contact cue. RTK-fixed positioning was maintained throughout testing. Across 20 outdoor cooperative missions, 17 successfully completed deployment, sortie, and recovery, giving an observed mission success rate of 85%. For successful recoveries, mean terminal-alignment time was 6.3 s, mean planar alignment error at acceptance was 0.18 m, maximum terminal planar deviation was 0.32 m within a 0.40 m capture radius, and minimum logged relative vertical separation during coupled descent was 0.41 m. Mothership planar station-keeping RMS error was 0.25 m. The three unsuccessful trials occurred at different mission stages and are analyzed separately. Results demonstrate practical autonomous aerial recovery within the tested outdoor operating envelope.

0.57

Towards safe and optimal flight: Viability Kernel MPC for Fully Actuated Multirotor

cs.RO eess.SY ·2026-08-26 ·Massimiliano Bertoni, Alberto Piccina, Gianni Lunardi, Elias Fontanari, Andrea Del Prete +2 more
similarity 0.61
Abstract

Industrial aerial robotics demands safety guarantees for navigation in unstructured environments while optimizing performance and computational efficiency. This paper presents a method for generating safe pose trajectories for fully actuated multirotors within a Model Predictive Control (MPC) framework, leveraging both viability theory and data-driven methods. Obstacle avoidance is enforced through dynamically computed axis-aligned bounding boxes, providing formal safety guarantees without exhaustive offline reachability analysis. Numerical simulations on a fully actuated tilted hexarotor validate the approach, demonstrating successful navigation in cluttered environments with real-time computational performance.

0.08