CS Paper Radar

Practical Complete Tracking Through Gimbaled Unidirectional Actuation with Application to Multirotor UAVs

Ian Willebeek-LeMair, Craig Woolsey

eess.SY ·submitted 2026-10-22 22:11 UTC · v1

Abstract

This paper addresses the problem of practical tracking control for robotic vehicles with gimbaled unidirectional actuators, with special application to multirotor unmanned aerial vehicles. A widely recognized obstacle to tracking control for multirotors is the free-fall singularity --- when a multirotor is commanded to free fall, the vehicle's target attitude becomes undefined. This singularity is a pathology pertinent to all robotic vehicles with gimbaled unidirectional actuators. This paper considers the general theoretical problem for vehicles with gimbaled actuators. Starting from a baseline robust controller that assumes unconstrained inputs, we redesign the control law to be compatible with the gimbaled actuator. This is accomplished by driving the output of the gimbaled actuator to a ball centered at the target input value. The baseline controller's tracking guarantees are recovered in a practical sense. We apply our results to synthesize a global practical complete position tracking controller for multirotor unmanned aerial vehicles. The theory is demonstrated in simulation.

Comment
16 pages, 10 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Quasi-Static Fault-Tolerant Feedback Control of a Quadrotor Carrying a Slung Payload under Rotor Failure

eess.SY ·2026-11-11 ·Mohamed Al Lawati, Adeel Akhtar
code/data similarity 0.65
Abstract · 8 pages, 8 figures

This paper presents a nonlinear control law for a slung payload system (SPS) consisting of a quadrotor unmanned aerial vehicle (UAV) carrying a slung payload. We propose a fault-tolerant control (FTC) design for the case of a complete single-rotor failure, i.e., only three functioning propellers. The failure is not modeled as a disturbance to be handled by estimation. Rather, we model the faulty SPS in control-affine form and design a quasi-static feedback law directly for the faulty dynamics. The controller achieves local exponential convergence of the payload position to a geometric path in space, rather than tracking a timed reference trajectory. Moreover, the transverse dynamics are exponentially stable, and the path-following manifold is rendered controlled invariant by feedback. Controlled invariance allows motion along the path to be prescribed independently through a tangential command while the state stays on the path-following manifold. The UAV body angular velocity remains bounded under bounded applied torque despite the failure. To validate the control design, numerical simulations apply the controller derived from the faulty SPS model in coordinates to the coordinate-free SPS model. Code and animations are available at https://gradslab.github.io/qs-sl/.

0.22

Towards safe and optimal flight: Viability Kernel MPC for Fully Actuated Multirotor

cs.RO eess.SY ·2026-08-26 ·Massimiliano Bertoni, Alberto Piccina, Gianni Lunardi, Elias Fontanari, Andrea Del Prete +2 more
similarity 0.64
Abstract

Industrial aerial robotics demands safety guarantees for navigation in unstructured environments while optimizing performance and computational efficiency. This paper presents a method for generating safe pose trajectories for fully actuated multirotors within a Model Predictive Control (MPC) framework, leveraging both viability theory and data-driven methods. Obstacle avoidance is enforced through dynamically computed axis-aligned bounding boxes, providing formal safety guarantees without exhaustive offline reachability analysis. Numerical simulations on a fully actuated tilted hexarotor validate the approach, demonstrating successful navigation in cluttered environments with real-time computational performance.

0.08

Vector Field Following for Quadrotors via Reduced Attitude Representations with Applications to Safety-Critical Control

eess.SY ·2026-10-05 ·Mohammad Mirtaba, Max H. Cohen
similarity 0.63
Abstract

Vector field tracking for quadrotors provides a systematic framework for specifying complex behaviors at the translational level and transferring them to the full vehicle dynamics. Objectives such as safety, for example, can be encoded into a low-dimensional vector field, which is then embedded into the full dynamics through appropriate tracking conditions. The development of such tracking controllers for quadrotors can be facilitated by the fact that their translational dynamics depend only on the thrust direction and are independent of the vehicle's heading. Thus, reduced-attitude representations, leveraging the geometry of the unit sphere, provide a natural framework for vector field tracking on quadrotors. In this work, we propose two vector field tracking controllers for quadrotors using reduced-attitude representations based on dynamic extension and geometric control, respectively. Next, we illustrate how safety can be encoded into the desired vector field using control barrier functions and enforced for the full system. The effectiveness of the proposed approaches is demonstrated via simulations and experimental flight tests.

0.15

Observer-Based Robust Control for an Aerial Manipulator System under Unknown External Disturbances

eess.SY ·2026-09-07 ·Mayank Pandey, Sneha Gajbhiye
similarity 0.62
Abstract

This paper addresses the mathematical modeling and control of an aerial manipulator system comprising a quadrotor as the uncrewed aerial vehicle and a robotic arm as the manipulator. The dynamic model is established by identifying the overall center-of-mass velocity and the system's orientation as constraints, yielding a simplified, two-decoupled subsystems: a locked (overall translation) subsystem and a shape-space (actuation or overall rotation) subsystem, both subjected to external disturbances. Since the system is mechanically coupled, a critical challenge arises where constant bounded disturbances in the first subsystem manifest as time-varying, state-dependent disturbances in the second subsystem. Given that the quadrotor is inherently unstable, the movement of the robotic manipulator (RM) during flight can further jeopardize the stability of the entire QRM system if these disturbances and coupling effects are not effectively managed. To address this, we present a continuous nonlinear disturbance observer-based feedback control law, which enables the independent control of each subsystem while systematically eliminating cross-coupling effects. The efficacy of the proposed controller is validated through multiple simulations emulating practical operating conditions, thereby substantiating its real-world applicability and highlighting the core contributions of this work.

0.11

Robust Variable-Horizon MPC for Landing a Multirotor UAV on a Moving Platform

eess.SY ·2026-09-28 ·Sander Doodeman, Niels Berkers, Paula Chanfreut, Elena Torta, Duarte Antunes
similarity 0.61
Abstract · Submitted to ICRA 2027

Landing a multirotor Unmanned Aerial Vehicle (UAV) on a moving platform is challenging because a UAV is underactuated and the desired landing state is generally a non-equilibrium state. Shrinking- and variable-horizon approaches are promising for reaching such non-equilibrium targets, but often lack robustness to disturbances. Robust Variable-Horizon Model Predictive Control (VH-MPC) addresses this limitation but is computationally complex for a high-dimensional system such as a multirotor UAV. This paper presents a computationally efficient robust Variable-Horizon MPC method for reaching non-equilibrium targets under bounded disturbances. The online horizon search is restricted to a neighborhood of the previously selected horizon, while maintaining recursive feasibility under bounded disturbances. A fixed robust positively invariant tube provides horizon-independent constraint tightening. By exploiting the differential flatness property of a UAV, this approach is applied to a decoupled linearized system, enabling real-time implementation on an onboard Raspberry Pi 5 at 20 Hz. Simulations show that restricting the horizon search substantially reduces computation with limited impact on the objective, while real-time Gazebo simulations demonstrate the robustness of the method. Physical experiments demonstrate successful landing of a multirotor UAV on a moving Stewart platform.

0.13

Equivalent-Agent Guidance for Cooperative UAV Payload Transportation

eess.SY ·2026-09-16 ·Saurabh Kumar, Shashi Ranjan Kumar, Abhinav Sinha
similarity 0.61
Abstract

This paper develops a guidance framework for cooperative transportation of a rigid payload by two uncrewed aerial vehicles (UAVs) to stationary and maneuvering landing platforms. A virtual equivalent-agent representation is first introduced to describe the translational motion of the rigidly coupled UAV-payload system, allowing the transportation problem to be formulated in terms of relative range and line-of-sight dynamics with respect to the landing platform. A geometric analysis establishes the terminal feasibility conditions for payload delivery. In particular, an arbitrary prescribed approach angle can be achieved for a stationary platform, whereas successful delivery to a maneuvering platform with zero relative velocity requires terminal velocity and heading angle synchronization and consequently a zero landing angle. Leveraging this framework, a robust fixed-time sliding mode guidance strategy is developed to regulate both relative range and line-of-sight dynamics. A separate link-orientation controller and control allocation scheme is presented to map virtual equivalent agent commands to the individual UAV's control inputs. The proposed strategy guarantees convergence to the desired landing configuration within a uniformly bounded time, independent of initial engagement geometries, while explicitly accommodating uncertainties arising from target maneuvers. Numerical simulations demonstrate accurate delivery under different terminal approach angles and platform maneuvers, while processor-in-the-loop implementation on a Raspberry Pi demonstrates that the guidance algorithm satisfies the real-time computational requirements. Nonetheless, a comparative analysis shows that the proposed framework achieves better tracking accuracy and faster sliding surface convergence while requiring significantly less control energy from each UAV.

0.22

Quasi-Static Fault-Tolerant Feedback Control of a Quadrotor under Rotor Failure with Provable Safety Guarantees

eess.SY math.DSmath.OC ·2026-09-20 ·Mohamed Al Lawati, Adeel Akhtar
publishedcode/datahot direction similarity 0.60
Abstract · 7 pages, 3 figures (14 panels). Accepted for presentation at the 2026 IEEE Conference on Control Technology and Applications (CCTA)

This paper presents a nonlinear control law for a quadrotor unmanned aerial vehicle (UAV) under single-rotor failure that guarantees set stabilization via quasi-static feedback (QSF). Given a geometric curve in three-dimensional space, we characterize and stabilize the zero-dynamics manifold, also known as the path-following manifold, which represents all feasible motions along the path. Stabilizing this manifold ensures path-invariance: a UAV with a failed rotor initialized on the path with an appropriate orientation remains on the path for all future time. Furthermore, local exponential convergence to the manifold is guaranteed under certain conditions, implying that, under the stated assumptions, rotor failure during flight does not cause transverse deviation from the path. The proposed controller thus provides theoretical safety guarantees, which are validated through numerical experiments in the Drake physics-based simulation engine. The code is publicly available at https://gradslab.github.io/quasistatic-ftc/.

0.56

Emergent Underactuation in Fully Actuated Multirotors by Minimizing a Homogeneous Allocation Cost

cs.RO eess.SYmath.OC ·2026-10-03 ·Antonio Franchi, Barbara Bazzana
similarity 0.60
Abstract

Full actuation is commonly valued for independent position and attitude tracking. This work establishes a complementary principle: when only a position trajectory is prescribed, minimizing a positively homogeneous allocation cost selects underactuated-like behavior on a fully actuated multirotor. This cost class includes norms and power laws, including standard minimum-norm pseudoinverse allocation. We use fiberwise infimization to transport the actuator-output cost to wrench space, yielding a homogeneous infimal allocation cost. Restriction to unit zero-moment forces defines a directional landscape whose minimizing directions are independent of force magnitude. We show that aligning any fixed minimizing direction with the required world-frame force minimizes instantaneous and integrated zero-moment allocation costs. The resulting body force remains in a fixed one-dimensional subspace without transverse components. We derive an exact optimality-gap decomposition quantifying the additional cost of every other attitude trajectory and characterizing the minimum-cost class. When a disturbance or prescribed-motion change modifies the required-force direction, a fully actuated platform can immediately generate the modified force using transverse authority and reorient toward the new minimum-cost family. A structurally underactuated platform must reorient before generating that force. Thus, homogeneous allocation-cost minimization explains why optimal nominal motion can be underactuated-like, while full actuation remains valuable for disturbance rejection and transient force generation.

0.26