CS Paper Radar

Dual Path Following for an Aerial Manipulator Under State and Input Constraints via Transverse Feedback Linearization

Hamza Tariq, Adeel Akhtar

cs.RO eess.SYmath.OC ·submitted 2026-11-01 02:28 UTC · v1
code/data

Abstract

This paper studies dual path following for a quadrotor carrying a three-degree-of-freedom arm. The center of mass of the combined system must follow a vehicle path and the end effector must follow a second path, while the arm respects its joint limits and avoids its singular postures. The vehicle and the arm are mechanically coupled, so one controller must handle both paths. With the center of mass and the end-effector path coordinates as outputs, and a dynamic extension of the thrust, the system admits a normal form without internal dynamics. We characterize the states where this normal form fails. We formulate the transverse feedback linearizing controller as a quadratic program that relaxes only the speed of the end effector along its path and imposes safety and actuator limits as inequality constraints. The program reduces to a scalar problem with a closed-form solution. If it remains strictly feasible for all time, the feedback is locally Lipschitz, both paths are invariant and attractive, and every constraint holds. In the physics engine Drake, the controller resolves a conflict between the two speed references by slowing the end effector while both paths remain invariant. By contrast, a cascade with a safety filter leaves both paths. Code and animations are available at https://gradslab.github.io/am_dual_pf-/

Comment
8 pages, 3 Figures

Closest papers

Nearest neighbours by meaning across the whole index.

Quasi-Static Fault-Tolerant Feedback Control of a Quadrotor under Rotor Failure with Provable Safety Guarantees

eess.SY math.DSmath.OC ·2026-09-20 ·Mohamed Al Lawati, Adeel Akhtar
publishedcode/datahot direction similarity 0.74
Abstract · 7 pages, 3 figures (14 panels). Accepted for presentation at the 2026 IEEE Conference on Control Technology and Applications (CCTA)

This paper presents a nonlinear control law for a quadrotor unmanned aerial vehicle (UAV) under single-rotor failure that guarantees set stabilization via quasi-static feedback (QSF). Given a geometric curve in three-dimensional space, we characterize and stabilize the zero-dynamics manifold, also known as the path-following manifold, which represents all feasible motions along the path. Stabilizing this manifold ensures path-invariance: a UAV with a failed rotor initialized on the path with an appropriate orientation remains on the path for all future time. Furthermore, local exponential convergence to the manifold is guaranteed under certain conditions, implying that, under the stated assumptions, rotor failure during flight does not cause transverse deviation from the path. The proposed controller thus provides theoretical safety guarantees, which are validated through numerical experiments in the Drake physics-based simulation engine. The code is publicly available at https://gradslab.github.io/quasistatic-ftc/.

0.56

Observer-Based Robust Control for an Aerial Manipulator System under Unknown External Disturbances

eess.SY ·2026-09-07 ·Mayank Pandey, Sneha Gajbhiye
similarity 0.72
Abstract

This paper addresses the mathematical modeling and control of an aerial manipulator system comprising a quadrotor as the uncrewed aerial vehicle and a robotic arm as the manipulator. The dynamic model is established by identifying the overall center-of-mass velocity and the system's orientation as constraints, yielding a simplified, two-decoupled subsystems: a locked (overall translation) subsystem and a shape-space (actuation or overall rotation) subsystem, both subjected to external disturbances. Since the system is mechanically coupled, a critical challenge arises where constant bounded disturbances in the first subsystem manifest as time-varying, state-dependent disturbances in the second subsystem. Given that the quadrotor is inherently unstable, the movement of the robotic manipulator (RM) during flight can further jeopardize the stability of the entire QRM system if these disturbances and coupling effects are not effectively managed. To address this, we present a continuous nonlinear disturbance observer-based feedback control law, which enables the independent control of each subsystem while systematically eliminating cross-coupling effects. The efficacy of the proposed controller is validated through multiple simulations emulating practical operating conditions, thereby substantiating its real-world applicability and highlighting the core contributions of this work.

0.11

Decentralized Safe Path Following for Multiple Quadrotors on Intersecting Paths with Theoretical Guarantees

eess.SY cs.ROmath.OC ·2026-09-20 ·Hamza Tariq, Adeel Akhtar
code/datahot direction similarity 0.72
Abstract · 8 pages, 3 figures

This paper studies decentralized safe path following for multiple quadrotors on intersecting paths, where safety requires both collision avoidance and strict adherence to pre-assigned routes. The proposed controller reformulates transverse feedback linearization as a constrained quadratic program with four equality constraints: two enforce convergence to and strict adherence to the path, and two prescribe the desired speed and heading. Safety is achieved by relaxing only the along-path speed constraint, while the path and heading constraints remain hard. Under the stated assumptions, and for admissible initial conditions, the controller guarantees that all agents converge to and thereafter follow their assigned paths, avoid collisions, and avoid attitude singularities. We evaluate the controller in the Drake physics engine on non-planar intersecting paths and compare it against two nominal-plus-safety-filter cascades. Code and additional results are available at https://gradslab.github.io/safe_multiquad_pf/.

0.64

Quasi-Static Fault-Tolerant Feedback Control of a Quadrotor Carrying a Slung Payload under Rotor Failure

eess.SY ·2026-11-11 ·Mohamed Al Lawati, Adeel Akhtar
code/data similarity 0.69
Abstract · 8 pages, 8 figures

This paper presents a nonlinear control law for a slung payload system (SPS) consisting of a quadrotor unmanned aerial vehicle (UAV) carrying a slung payload. We propose a fault-tolerant control (FTC) design for the case of a complete single-rotor failure, i.e., only three functioning propellers. The failure is not modeled as a disturbance to be handled by estimation. Rather, we model the faulty SPS in control-affine form and design a quasi-static feedback law directly for the faulty dynamics. The controller achieves local exponential convergence of the payload position to a geometric path in space, rather than tracking a timed reference trajectory. Moreover, the transverse dynamics are exponentially stable, and the path-following manifold is rendered controlled invariant by feedback. Controlled invariance allows motion along the path to be prescribed independently through a tangential command while the state stays on the path-following manifold. The UAV body angular velocity remains bounded under bounded applied torque despite the failure. To validate the control design, numerical simulations apply the controller derived from the faulty SPS model in coordinates to the coordinate-free SPS model. Code and animations are available at https://gradslab.github.io/qs-sl/.

0.22

Residual Wrench Certification and Margin-Aware Control Synthesis for Aerial Physical Interaction

cs.RO eess.SY ·2026-09-30 ·Abhimanyu Khadga, Abhinav Sinha, Shashi Ranjan Kumar
similarity 0.68
Abstract

We develop a task-relative framework for certifying residual wrench authority after hover and contact loading in multirotors with bounded actuators. Using convex geometry, we derive signed margins for prescribed convex reserves, including Euclidean balls and weighted ellipsoids. We obtain computable reserve certificates from actuator-interiority bounds to support slack-maximizing allocation. To preserve the required reserve, we propose command projection onto a tightened feasible set. We then connect the available reserve to structured gain synthesis and certify a local tracking region that respects actuator limits. Within this region, we establish nominal exponential convergence and robust ultimate boundedness. For the prescribed task and morphology family, we show that the optimized octarotor attains a larger margin than the optimized hexarotor at equal total thrust. We evaluate the proposed framework in closed-loop simulations of sustained rigid-wall contact using a fixed-geometry octarotor and a variable-tilt quadrotor with matched installed thrust. The quadrotor's local certificate admits a higher normalized push limit for the prescribed task family. In tests beyond the realizability boundaries, we observe the predicted loss of authority through rotor-thrust limits for the octarotor and tilt-servo limits for the quadrotor.

0.17

Design and Control of a Multimodal Legged-Aerial Robot Through Separate Control Contraction Metrics

cs.RO eess.SY ·2026-10-19 ·Kaushik Venkatesh Krishnamurthy, Eric Sihite, Alireza Ramezani, Morteza Gharib
published similarity 0.66
Abstract · Presented at 2026 IEEE International Conference on Intelligent Robots and Systems, Pittsburgh PA

The integration of dynamic legged locomotion and aerial mobility offers versatility that is deterred by challenges in payload distribution, actuation, and the contrasting requirements of both domains. In this paper, we present the design and operation of a multimodal quadrupedal aerial-legged robot. The presence of legged aerial systems also allows for thruster-assisted legged locomotion, which we make possible with a unified control framework using Control Contraction Metrics (CCM). We search for separate domain-specific contraction metrics for walking and flight independently offline and unify them using an online energy-based Control Lyapunov Function Quadratic Program (CLF QP). This enables optimal, cross-domain control allocation, which we show using simulations. We also show experimental results that validate the mechanical viability of our hardware and the paradigm of thruster-assisted trotting. The stability of said experiments motivates the deployment of the control framework for multimodal operations.

0.20

Effector-Centric NMPC of Tiltable-Multirotors for Offset-Free Omnidirectional Aerial Manipulation

cs.RO ·2026-08-18 ·Jinjie Li, Yicheng Chen, Johannes Kübel, Haokun Liu, Junichiro Sugihara +1 more
top venue similarity 0.65
Abstract · 22 pages, 26 figures. Accepted to IEEE Transactions on Robotics (T-RO). This arXiv version includes a two-page appendix with additional impl…

Aerial manipulation extends robotic operations to previously inaccessible aerial environments. Unlike arm-equipped aerial systems, tiltable-multirotors can directly generate six-degree-of-freedom wrenches through their flight bases, enabling both efficient movement and omnidirectional operation by tilting the thrust direction. This work presents a design analysis and a wrench-based control framework for tiltable-multirotors in aerial manipulation. We show that a four-rotor tiltable configuration provides a balance between interference-free propeller sizing and hovering efficiency across different attitudes, and its null-space redundancy is crucial for traversing singular configurations under physical constraints. We further show that an upward end-effector placement yields a favorable trade-off between geometric clearance and available wrench. To address disturbances, we propose a dual strategy consisting of a modified integral term for model error and an acceleration-based estimator for external wrenches. Building on these insights, we develop an effector-centric nonlinear model predictive control (NMPC) framework that integrates design choices, singularity handling, and disturbance compensation into a unified formulation. The proposed framework runs fully onboard at 100 Hz on a custom-built tiltable-quadrotor. Real-world experiments, including a 90-deg step cartwheel rotation, whiteboard pushing, and continuous 360-deg valve turning, demonstrate the feasibility of wrench-based omnidirectional manipulation with singularity traversal on a one-DoF-per-arm tiltable-quadrotor.

0.51

QuadHand: A Compact Quadrotor Aerial Manipulator with MRC-SDF-Based Whole-Body Motion Planning

cs.RO ·2026-09-28 ·Rui Jin, Ruiyang Liu, Xinhang Xu, Haotian Jin, Yi Wang +2 more
highly cited similarity 0.65
Abstract

Uncrewed aerial manipulators (UAMs) integrate robotic arms with aerial platforms for three-dimensional physical interaction. However, enlarging the workspace increases arm-induced disturbances, while existing geometric representations face a trade-off between geometric fidelity and computational efficiency in close-proximity interaction. This paper presents QuadHand, a compact quadrotor aerial manipulator with a 3-DoF arm, gripper, and battery-assisted passive CoG compensation module to reduce dominant arm-induced disturbances. We further propose MRC-SDF, a Multi-articulated Robot-Centric Signed Distance Field that preserves fine geometric detail with tractable computation, and a spatiotemporal whole-body trajectory optimization framework that jointly optimizes the quadrotor and manipulator for safe and executable trajectory generation. Simulations and real-world experiments demonstrate safe and executable aerial manipulation in complex environments.

0.36