CS Paper Radar

Design and Control of a Multimodal Legged-Aerial Robot Through Separate Control Contraction Metrics

Kaushik Venkatesh Krishnamurthy, Eric Sihite, Alireza Ramezani, Morteza Gharib

cs.RO eess.SY ·submitted 2026-10-19 21:37 UTC · v1
published

Abstract

The integration of dynamic legged locomotion and aerial mobility offers versatility that is deterred by challenges in payload distribution, actuation, and the contrasting requirements of both domains. In this paper, we present the design and operation of a multimodal quadrupedal aerial-legged robot. The presence of legged aerial systems also allows for thruster-assisted legged locomotion, which we make possible with a unified control framework using Control Contraction Metrics (CCM). We search for separate domain-specific contraction metrics for walking and flight independently offline and unify them using an online energy-based Control Lyapunov Function Quadratic Program (CLF QP). This enables optimal, cross-domain control allocation, which we show using simulations. We also show experimental results that validate the mechanical viability of our hardware and the paradigm of thruster-assisted trotting. The stability of said experiments motivates the deployment of the control framework for multimodal operations.

Comment
Presented at 2026 IEEE International Conference on Intelligent Robots and Systems, Pittsburgh PA

Closest papers

Nearest neighbours by meaning across the whole index.

Bio-inspired Thrust-Assisted Trotting on a legged-Aerial Robot via Real-Time QP-MPC

cs.RO ·2026-10-19 ·Shreyansh Pitroda, Eric Sihite, Alireza Ramezani, Morteza Gharib
published similarity 0.74
Abstract · To be published in IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2026)

This paper presents the hardware implementation of a quadratic program-based controller on Harpy: thruster-assisted bipedal robot to perform thruster-assisted trotting. This is inspired by wing-assisted locomotion observed in birds such as the chukar partridge, which employ thrust vectoring to manipulate the ground reaction force. The proposed controller formulates the thruster-assisted spring-loaded inverted pendulum dynamics as a condensed QP-based model predictive control problem, enabling simultaneous regulation of ground contact force and active thrust vectoring at 500 Hz. A decoupled control architecture is used, where the robot's sagittal dynamics are controlled using QP-MPC while the frontal dynamics is regulated using a cascade orientation stabilization controller. Two experiments were conducted with different forward reference velocities of 0 m/s and 0.1 m/s. While the instantaneous velocity oscillates, the mean velocities can track their respective reference. Additionally, joint tracking error remains within 1 deg while tracking the desired leg length given by the leg trajectory controller and desired swing trajectory given by Raibert's heuristic. The QP-MPC problem is consistently solved with 0.18ms, which is well within the 2ms computation budget while satisfying the GRF friction cone constraint.

0.40

QuadHand: A Compact Quadrotor Aerial Manipulator with MRC-SDF-Based Whole-Body Motion Planning

cs.RO ·2026-09-28 ·Rui Jin, Ruiyang Liu, Xinhang Xu, Haotian Jin, Yi Wang +2 more
highly cited similarity 0.71
Abstract

Uncrewed aerial manipulators (UAMs) integrate robotic arms with aerial platforms for three-dimensional physical interaction. However, enlarging the workspace increases arm-induced disturbances, while existing geometric representations face a trade-off between geometric fidelity and computational efficiency in close-proximity interaction. This paper presents QuadHand, a compact quadrotor aerial manipulator with a 3-DoF arm, gripper, and battery-assisted passive CoG compensation module to reduce dominant arm-induced disturbances. We further propose MRC-SDF, a Multi-articulated Robot-Centric Signed Distance Field that preserves fine geometric detail with tractable computation, and a spatiotemporal whole-body trajectory optimization framework that jointly optimizes the quadrotor and manipulator for safe and executable trajectory generation. Simulations and real-world experiments demonstrate safe and executable aerial manipulation in complex environments.

0.36

Anti-Gravity Walking by a Flying Humanoid Robot via Thrust-Rate Input Whole-Body Model Predictive Control

cs.RO ·2026-09-07 ·Kazuki Sugihara, Kei Okada
top venue similarity 0.67
Abstract

Flying humanoids are expected to perform tasks in diverse environments, while their existing locomotion is mainly limited to aerial flight and ground walking. The capability to move in complex three-dimensional space can greatly expand their application range. For such walking motion on ceilings and similar anti-gravity environments, whole-body MPC is effective. However, the discontinuous changes in dynamic structure accompanying contact switching during walking can induce thrust spikes, resulting in control instability. Therefore, in this work, we propose and implement a real-time whole-body MPC framework for anti-gravity bipedal walking. First, we formulate whole-body MPC using the time derivative of thrust, namely thrust-rate, as the control input. This formulation guarantees continuity of the thrust trajectory during contact switching while preserving the sparse structure of the optimal control problem for fast computation. Second, we address the lack of natural support forces in anti-gravity environments. We introduce lower bounds on the foot-normal component of the contact force, and smoothly transfer them during the doublesupport phase. Finally, we implement the proposed framework and demonstrate anti-gravity walking by a flying humanoid through simulation and a hardware experiment. To the best of our knowledge, this is the first demonstration of multi-contact whole-body MPC for a transformable aerial robot and walking by a flying humanoid beyond the ground.

0.39

Dual Path Following for an Aerial Manipulator Under State and Input Constraints via Transverse Feedback Linearization

cs.RO eess.SYmath.OC ·2026-11-01 ·Hamza Tariq, Adeel Akhtar
code/data similarity 0.66
Abstract · 8 pages, 3 Figures

This paper studies dual path following for a quadrotor carrying a three-degree-of-freedom arm. The center of mass of the combined system must follow a vehicle path and the end effector must follow a second path, while the arm respects its joint limits and avoids its singular postures. The vehicle and the arm are mechanically coupled, so one controller must handle both paths. With the center of mass and the end-effector path coordinates as outputs, and a dynamic extension of the thrust, the system admits a normal form without internal dynamics. We characterize the states where this normal form fails. We formulate the transverse feedback linearizing controller as a quadratic program that relaxes only the speed of the end effector along its path and imposes safety and actuator limits as inequality constraints. The program reduces to a scalar problem with a closed-form solution. If it remains strictly feasible for all time, the feedback is locally Lipschitz, both paths are invariant and attractive, and every constraint holds. In the physics engine Drake, the controller resolves a conflict between the two speed references by slowing the end effector while both paths remain invariant. By contrast, a cascade with a safety filter leaves both paths. Code and animations are available at https://gradslab.github.io/am_dual_pf-/

0.22

Duty Factor Predicts Robust Constrained Quadrupedal Locomotion Across Gait Types

cs.RO ·2026-09-18 ·James Zhu, David Ologan, George Ortiz, Thomas Chun Fai Lee, Selvin Garcia Gonzalez +3 more
similarity 0.66
Abstract

Quadrupedal robots are increasingly deployed in environments where locomotion must remain robust to disturbances and constrained terrain. Gait type, such as walking or trotting, is commonly used to characterize quadrupedal locomotion. However, gait type does not uniquely define locomotion, as parameters such as duty factor, speed, and stance width can vary within a single gait type. In this work, we investigate the relationship between these gait parameters using three distinct quadrupedal locomotion control approaches. First, using whole body trajectory optimization with LQR feedback, we show that duty factor is a stronger predictor of local error convergence than nominal gait type. Second, we investigate duty factor selection with a learned locomotion controller, suggesting how duty factor may serve as a low-dimensional parameter for adapting locomotion robustness in narrow-terrain environments. Finally, we show that these trends persist under a centroidal model predictive control framework and validate them through narrow-terrain experiments on a physical quadruped. These results show that duty factor provides a simple and effective basis for understanding and selecting robust quadrupedal locomotion across gait types and control architectures.

0.27

Observer-Based Robust Control for an Aerial Manipulator System under Unknown External Disturbances

eess.SY ·2026-09-07 ·Mayank Pandey, Sneha Gajbhiye
similarity 0.66
Abstract

This paper addresses the mathematical modeling and control of an aerial manipulator system comprising a quadrotor as the uncrewed aerial vehicle and a robotic arm as the manipulator. The dynamic model is established by identifying the overall center-of-mass velocity and the system's orientation as constraints, yielding a simplified, two-decoupled subsystems: a locked (overall translation) subsystem and a shape-space (actuation or overall rotation) subsystem, both subjected to external disturbances. Since the system is mechanically coupled, a critical challenge arises where constant bounded disturbances in the first subsystem manifest as time-varying, state-dependent disturbances in the second subsystem. Given that the quadrotor is inherently unstable, the movement of the robotic manipulator (RM) during flight can further jeopardize the stability of the entire QRM system if these disturbances and coupling effects are not effectively managed. To address this, we present a continuous nonlinear disturbance observer-based feedback control law, which enables the independent control of each subsystem while systematically eliminating cross-coupling effects. The efficacy of the proposed controller is validated through multiple simulations emulating practical operating conditions, thereby substantiating its real-world applicability and highlighting the core contributions of this work.

0.11

A Bi-level Co-design Framework for Lunar Monoped with 2D Jump and Landing Control

cs.RO eess.SY ·2026-10-27 ·Sanjay Ramkumar, Suraj Kumar
similarity 0.65
Abstract · 8 pages, 13 figures

Legged robots for lunar exploration must be designed for low gravity, where reduced contact forces and long flight phases make leg morphology and controller choice interdependent. We study this for a planar monoped in lunar gravity ($1.625$ m/s$^2$) using a bi-level co-design framework: a differential evolution outer loop searches over link lengths, and each candidate is evaluated on a vertical jump by either a quadratic program based task-space controller (QP-TSC) or a direct-collocation based trajectory optimization. The two controllers yield different optimal link lengths, and trajectory optimization outperforms the QP-TSC across most of the design space, with 17% lower Cost of Transport (COT) at their respective optima. We then extend to a 2D jump, where trajectory optimization with centroidal angular momentum regulation produces stable in-place and forward jumps, and an LQR controller absorbs impact and stabilizes the robot after touchdown. This is demonstrated on a baseline morphology with both links 0.3 m long.

0.17

DR-MPC: Fast and Feasible Dynamics-Relaxed Model-Predictive Control for Legged Locomotion

cs.RO eess.SY ·2026-09-17 ·Run Wang, Alapati Tuerxun, Shuo Liu, Wei Xiao, Ján Drgoňa +2 more
code/data similarity 0.65
Abstract · 8 pages, 5 figures, submitted to RA-L

This paper presents dynamics-relaxed model predictive control (DR-MPC), a novel MPC formulation for legged locomotion, and a tailored interior-point method (IPM) solver. The formulation combines online optimization feasibility by construction with a contact-aware input parameterization. DR-MPC moves the dynamics equality and affine input constraints into quadratic penalties and retains only nonempty box constraints. The resulting box-constrained quadratic program (QP) has a block-arrow Hessian that enables the state and affine-output directions to be eliminated through a Schur complement. The solver factors only the reduced control system after swing-force elimination and contact-aligned move blocking. For the evaluated implementations using the same DR-MPC formulation, our method achieves median end-to-end MPC speedups of $16.0\times$ over HPIPM and $4.4\times$ over OSQP, with comparable locomotion performance in simulation. DR-MPC achieves a median onboard MPC end-to-end time of $4.4$ ms and is validated on a Unitree Go1 quadruped. Open-source code will be made available after publication.

0.27