CS Paper Radar

A Hierarchical Synergistic Deep Learning Framework Integrating Composition, Structure, and Ionic Transport for Solid-State Electrolyte Discovery

Hongwei Du, Dingyang Lv, Baole Wei, Yongheng Li, Feng Yu, Ziheng Lu, Siqi Shi, Hong Wang

cs.AI cond-mat.mtrl-scics.LG ·submitted 2026-08-26 10:04 UTC · v1

Abstract

Inorganic solid-state electrolytes must combine high room-temperature ionic conductivity, a wide electrochemical window, excellent electronic insulation, and favorable mechanical compliance. Single models struggle to support reliable multi-objective screening across vast chemical spaces because of training-data distribution mismatch, cross-property dataset heterogeneity, and scarce kinetic transport data. To overcome these limitations, we develop a hierarchical synergistic deep-learning framework that sequentially coordinates efficiency, accuracy, and reliability through four complementary modules. The in-house-developed L-G-DCNN and a multi-fidelity implementation built on DenseGNN serve as compositional and structural experts for thermodynamic coarse screening and multi-property evaluation, respectively; MatterSim and system-specific DeePMD models provide transport pre-assessment and kinetic validation. Systematic benchmarks show that each module outperforms mainstream counterparts in its task, while retrospective validation establishes dual closed-loop verification of module-level accuracy and end-to-end workflow reliability. Applied to 30,364,908 Alex/ICSD-derived candidates, the framework identifies 97 high-performance candidates with room-temperature ionic conductivities of 0.109--59.0 mS/cm, including 94 halides, one borohydride, and two oxides. Consistency with independent experimental data confirms that 76 of the 94 halides fall within reported high-conductivity structural regions. Analysis reveals that Li$^{+}$ jump-network connectivity, rather than the number of geometric Li sites, is the core determinant of room-temperature ionic conductivity. Li-defect engineering effectively enhances oxide transport, whereas the inherent rigidity of the O$^{2-}$ framework suggests a potential upper limit on oxide electrolyte performance.

Comment
22 pages, 8 figures, 1 table

Closest papers

Nearest neighbours by meaning across the whole index.

Comprehensive Workflow for Uncertainty-Aware Ionic Liquid Solvent Discovery

cs.LG cond-mat.mtrl-sci ·2026-10-12 ·Alexander Lobo, Urvi Awasthi, Leonid Zhukov
top venue similarity 0.73
Abstract · 10 pages, 5 figures, 5 tables. Accepted at IEEE ICDM 2026. Copyright 2026 IEEE. Personal use of this material is permitted. Permission from …

Designing synthesizable materials with targeted properties remains one of the central objectives in materials sciences. Ionic liquids (ILs) are well suited to this goal due to their "tunability", where physical and chemical properties can be precisely customized by modifying their molecular structure, specifically by varying the combination of cations and anions. At the same time, current data-driven property models for ionic liquids often degrade in scarce, noisy, and uneven data regimes, where measurements cover only a small fraction of chemical space and a limited range of thermodynamic conditions. This makes out-of-distribution screening brittle: even when point predictions look plausible, it is difficult to compare candidates consistently, quantify downstream implications, or trust rankings enough to guide molecular discovery. We present a property-prediction and optimal candidate selection workflow that treats data processing, deep learning modeling, and physics-based calculations as a coupled system, linking property prediction with uncertainty estimation and physics-based filtering. By tightening the link between predicted properties and the criteria used for down-selection, the workflow supports reliable out-of-distribution ranking and enables prioritization of previously untested ionic liquid candidates with favorable predicted trade-offs. We demonstrate the application of our workflow by designing novel ionic liquids for CO2 capture from flue gas, predicting their properties and selecting Pareto-optimal candidates based on CO2 solubility, IL viscosity and working capacity.

0.27

Distilling Large-Scale Machine Learning Interatomic Potentials to Predict Long-Timescale Electrolyte Transport Properties

cs.LG physics.chem-phcond-mat.mtrl-scicond-mat.soft+1 ·2026-10-29 ·Ishan Amin, Yue Jian, Nitesh Kumar, Christine Zhang, Jianwei Lai +8 more
similarity 0.71
Abstract

Accurately predicting the transport properties of liquid electrolytes is critical for next-generation battery design and requires force fields that are both quantum-mechanically accurate and fast enough for long-timescale simulation. Recent large-scale pretrained machine learning interatomic potentials (MLIPs) approach density-functional-theory accuracy, but remain too slow to access the necessary timescales to converge transport properties. We provide a knowledge distillation procedure to transfer the accuracy of a large-scale "teacher" MLIP into fast, system-specific "students", without any additional ab initio data. Our distilled models run ~40x faster, reproduce teacher-predicted structural observables, and produce stable 20 ns trajectories in days, rather than the months the teacher would require. Across a diverse set of sodium- and lithium-ion electrolytes, student-predicted self-diffusivities, ionic conductivities, and shear viscosities track experiment and outperform classical force-field predictions, establishing distillation as a practical route to accurate, long-timescale simulations necessary for high-throughput electrolyte screening.

0.22

ElectrolyteFM: Unifying Electrolyte Property Prediction through Cross-Property Knowledge Learning

cs.LG ·2026-09-30 ·Jiaxin Yu, Shuo Wang, Peng Wang, Yongcai Wang, Deying Li
similarity 0.69
Abstract

Electrolyte formulation design requires balancing multiple physicochemical properties, yet existing models often focus on a limited subset. Learning each property in isolation can overlook transferable chemical information, whereas indiscriminate sharing can introduce cross-property interference. Our directed transfer analysis shows that jointly learning two property prediction tasks can improve or degrade prediction relative to separate training, with asymmetric transfer effects between the tasks. We propose ElectrolyteFM, a unified multi-property prediction model which can more accurately predict multiple properties of each electrolyte by effectively identifying and utilizing property-specific features and knowledge shared across properties. More specifically, ElectrolyteFM learns property-specific representations independently and captures cross-property knowledge through a separately trained expert pool. A router selects relevant shared information for each formulation and target property, and property-specific residual adapters convert this information into corrections to the corresponding representation for prediction. Experiments on Electrolyte12 show that ElectrolyteFM reduces normalized mean absolute error averaged across 12 electrolyte properties by 14.8% relative to the strongest electrolyte-specific baseline. On an independent sodium-electrolyte dataset unseen during training, it reduces conductivity mean absolute error by 6.7% relative to the best-performing baseline.

0.21

PaddleMaterials: An End-to-End Deep Learning Toolkit for Materials Science

cs.LG cond-mat.mtrl-scics.CE ·2026-11-02 ·Xuwei Liu, Zhimin Zhang, Xiaoguang Hu, Zhongwei Liu, Yuanhui Sun +3 more
code/data similarity 0.69
Abstract

Machine learning supports materials design, atomistic simulation and experimental characterization, yet models and workflows remain fragmented. We present PaddleMaterials, an open-source framework integrating heterogeneous materials-learning tasks while preserving task-specific representations and scientific semantics. It unifies data processing, training, evaluation, pretrained-model management and workflows across six task classes: property prediction, structure generation, machine-learning interatomic potentials, electronic-structure fields, spectrum elucidation and microscopy image processing. Task interfaces record physical quantities, units, aggregation conventions and references, making cross-task composition verifiable. A shared compiler backend enables switching from dynamic-graph to compiled execution through one setting, using graph optimization, operator fusion and hardware-targeted code generation without changing model definitions. Across 65 model instances in 11 groups, compiled execution accelerated every instance in eight groups, with group median speedups of 11%-224% and group maximum speedups of 11%-336%. Case studies on LiMnO2 and toluene link structure generation or spectrum elucidation, interatomic-potential relaxation, property prediction and electron-density prediction, using same-geometry density functional theory (DFT) calculations as references. For LiMnO2, predicted formation energies for generated and relaxed structures differed from same-geometry PBE+U references by at most 7 meV per atom, while the computational cost of model steps was less than one-twentieth of a DFT single-point calculation. PaddleMaterials extends unified materials workflows beyond conventional property, potential and structure-generation tasks while supporting verifiable cross-task operations and compiled execution.

0.29

Differential Learning for Robust Prediction of Thermal Stability with Application to Energetic Materials

cs.LG physics.chem-phcond-mat.mtrl-sci ·2026-08-24 ·Megan C. Davis, R. Seaton Ullberg, Jeremy N. Schroeder, Andrew H. Salij, Marc J. Cawkwell +3 more
similarity 0.66
Abstract

Predicting thermal stability during handling and storage is essential for the design of safe and reliable energetic materials. However, experimental measurements vary significantly across laboratories due to differences in protocols and analysis methods, making it difficult to train reliable predictive models. We address this challenge through differential learning. Rather than predicting absolute decomposition temperatures, we instead train message passing neural networks to predict relative differences between pairs of molecules. This approach reduces sensitivity to systematic experimental errors and achieves >85% accuracy in ranking compounds by thermal stability, outperforming conventional regression methods on the same heterogeneous dataset. To understand what drives these predictions, we compare neural network models with interpretable alternatives built from descriptors derived from ab initio calculations and cheminformatics software. This analysis identifies bond dissociation enthalpy as a key determinant of thermal stability rankings, providing further insight into the complex chemistry of thermal decomposition. The differential learning framework generalizes across model architectures, from graph neural networks to classical descriptor-based approaches. Our results demonstrate that learning relative properties rather than absolute values offers a practical solution for modeling noisy experimental data, with direct applications in materials design where thermal stability predictions inform safety protocols.

0.33

SoLiD26: A First Principles Solid-Liquid Interface Dataset for Machine-learned Interatomic Potentials

cs.LG cond-mat.mtrl-sciphysics.chem-phphysics.comp-ph ·2026-09-23 ·Jonas Busk, Emil J. P. Frost, Yogeshwaran Krishnan, Henrik H. Kristoffersen, August E. G. Mikkelsen +5 more
similarity 0.64
Abstract

Machine-learned interatomic potentials (MLIPs) enable simulations of larger atomistic systems over longer timescales than traditional ab initio methods but require large, diverse training data. Existing datasets lack comprehensive sampling of solid-liquid interfaces, which exhibit complex phenomena such as solvent layering and surface reconstruction critical for energy and catalytic materials. Here, we present SoLiD26, a curated solid-liquid interface dataset of 15.4 million first-principles structures with up to 576 atoms and 15 chemical elements for training and evaluating MLIPs. The structures were compiled from density functional theory (DFT) calculations, with most configurations originating from ab initio molecular dynamics (AIMD) simulations. SoLiD26 includes aqueous coinage metal interfaces, electrode-electrolyte systems, and selected bulk reference structures, calculated with VASP using the PBE functional and D3 dispersion corrections. The application of SoLiD26 for training and evaluating MLIPs is demonstrated with a suite of MACE models on a simple training, validation and test split. This dataset provides a valuable resource for advancing MLIP development targeted at modelling solid-liquid interfaces in electrochemical and catalytic systems.

0.17

Thermodynamics-Informed Learning Captures Hierarchical Hydrogen-Bond Networks in Deep Eutectic Solvents

cs.LG physics.chem-phquant-ph ·2026-11-04 ·Yanpeng Ye, Chaoran Duan, Mian Xu, S. Mani Sarathy
similarity 0.64
Abstract

Deep eutectic solvents (DESs) offer a tunable platform for lignocellulose refining, but their solvation behavior depends on multicomponent hydrogen-bond networks rather than individual constituent properties. We develop TiNN, a thermodynamics-informed neural network that hierarchically represents HBA-HBD association and solute accommodation through a learned free-energy pathway. Trained on 938 records, TiNN achieves a test-set $R^2$ of 0.917 and generalizes to new HBA-HBD combinations and sparse conditions. Ablation identifies solute-specific stabilization as the largest contributor to prediction accuracy, while the importance of hydrogen-bond compatibility depends on the dissolution mechanism. Experimental measurements of glucose, xylan, and Kraft lignin in acidic, basic, and neutral DESs show that TiNN reduces the geometric mean solubility error from more than 23-fold with COSMO-RS to approximately 1.5-fold. Without training on fractionation data, TiNN also distinguishes DES formulations with high and low lignin and hemicellulose removal from corn stover. These results support chemically grounded solvent screening for lignocellulose fractionation.

0.23

Prototype-guided transfer of sparse literature knowledge for electrolyte additive discovery

cs.LG physics.chem-ph ·2026-09-02 ·Weixiang Hong, Hongting Du, Jiayue Tang, Ruifeng Tan, Yangjian Quan +2 more
similarity 0.64
Abstract · 79 pages, 26 figures

Electrolyte additive discovery remains challenging because experimentally validated molecules are sparse, whereas accessible chemical spaces are vast and largely unlabeled. This challenge is amplified in lithium-ion batteries, where additive performance arises from coupled interfacial reactions rather than a single molecular property. Here, we develop a prototype-guided molecular intelligence, ProtoMI, a literature-driven framework that learns transferable structural priors from reported electrolyte additives and uses them to prioritize candidates in unlabeled chemical space. For boron-containing additives, ProtoMI combines 126 literature-reported molecules with 179,977 unlabeled candidates. Graph contrastive learning identifies seven chemically interpretable prototypes from the reported additives, and prototype guided semi-supervised contrastive learning adapts these prototypes to the candidate space under source-target distribution mismatch. In retrospective temporal validation, ProtoMI achieves enrichment factors of 9.2-45.6 while screening less than 2% of the candidate space. A subsequent translation step identifies four commercially accessible candidates. One representative candidate, 4,4,5,5-Tetramethyl-2-[10-(1naphthyl)anthracen-9-yl]-1,3,2-dioxaborolane (TNDB), improves high-temperature LiFePO4||graphite cycling at 55 °C by 34.93% relative to the baseline electrolyte. An arsenal of characterizations and operando optical fiber Fourier transform infrared spectroscopy suggest that TNDB forms B-containing, F/P/O-modified inorganic interphases, suppresses solvent decomposition and reduces Fe deposition on graphite. This case study shows how sparse literature knowledge can guide experimentally efficient molecular discovery in data-scarce battery-additive spaces.

0.18