CS Paper Radar

Thermodynamics-Informed Learning Captures Hierarchical Hydrogen-Bond Networks in Deep Eutectic Solvents

Yanpeng Ye, Chaoran Duan, Mian Xu, S. Mani Sarathy

cs.LG physics.chem-phquant-ph ·submitted 2026-11-04 14:43 UTC · v1

Abstract

Deep eutectic solvents (DESs) offer a tunable platform for lignocellulose refining, but their solvation behavior depends on multicomponent hydrogen-bond networks rather than individual constituent properties. We develop TiNN, a thermodynamics-informed neural network that hierarchically represents HBA-HBD association and solute accommodation through a learned free-energy pathway. Trained on 938 records, TiNN achieves a test-set $R^2$ of 0.917 and generalizes to new HBA-HBD combinations and sparse conditions. Ablation identifies solute-specific stabilization as the largest contributor to prediction accuracy, while the importance of hydrogen-bond compatibility depends on the dissolution mechanism. Experimental measurements of glucose, xylan, and Kraft lignin in acidic, basic, and neutral DESs show that TiNN reduces the geometric mean solubility error from more than 23-fold with COSMO-RS to approximately 1.5-fold. Without training on fractionation data, TiNN also distinguishes DES formulations with high and low lignin and hemicellulose removal from corn stover. These results support chemically grounded solvent screening for lignocellulose fractionation.

Closest papers

Nearest neighbours by meaning across the whole index.

EnSol: an environment-aware graph neural network for molecular solubility prediction

cs.LG cs.AI ·2026-09-17 ·Thao Nguyen, Saman Shafaei, Zhengyi Zhang, Huimin Zhao, Heng Ji
benchmark similarity 0.66
Abstract

Molecular solubility directly affects key aspects of molecular development such as reaction feasibility, formulation performance, separation efficiency, and solvent selection. However, experimental measurement across solutes, solvents, and temperatures remains costly and sparsely sampled. Existing computational models often rely on fixed-solvent assumptions, deterministic formulations, or simplified representations of solute-solvent interactions, limiting their ability to capture complex molecular interactions, continuous temperature effects, and experimental uncertainty. Here, we introduce EnSol, an environment-aware probabilistic framework for molecular solubility prediction. EnSol represents the solute and solvent as molecular graphs and learns separate representations for each before bringing them together through cross-attention to capture solute-solvent interactions. Temperature is incorporated directly into the solvent environment through feature-wise modulation, and a mixture density network predicts full solubility distributions to capture both temperature-dependent behavior and experimental uncertainty. On the independent SolProp and Leeds benchmark datasets, EnSol achieved Spearman correlations of 0.876 and 0.601, respectively, outperforming state-of-the-art solubility prediction models across both benchmarks. Beyond computational benchmarking, experimental validation across chemically diverse solute-solvent pairs showed that EnSol maintained strong predictive performance and supported reliable solvent ranking, achieving a Spearman correlation of 0.715. These results show that EnSol can support reliable solubility prediction and solvent selection across diverse chemical systems while accounting for predictive uncertainty.

0.26

A Hierarchical Synergistic Deep Learning Framework Integrating Composition, Structure, and Ionic Transport for Solid-State Electrolyte Discovery

cs.AI cond-mat.mtrl-scics.LG ·2026-08-26 ·Hongwei Du, Dingyang Lv, Baole Wei, Yongheng Li, Feng Yu +3 more
similarity 0.64
Abstract · 22 pages, 8 figures, 1 table

Inorganic solid-state electrolytes must combine high room-temperature ionic conductivity, a wide electrochemical window, excellent electronic insulation, and favorable mechanical compliance. Single models struggle to support reliable multi-objective screening across vast chemical spaces because of training-data distribution mismatch, cross-property dataset heterogeneity, and scarce kinetic transport data. To overcome these limitations, we develop a hierarchical synergistic deep-learning framework that sequentially coordinates efficiency, accuracy, and reliability through four complementary modules. The in-house-developed L-G-DCNN and a multi-fidelity implementation built on DenseGNN serve as compositional and structural experts for thermodynamic coarse screening and multi-property evaluation, respectively; MatterSim and system-specific DeePMD models provide transport pre-assessment and kinetic validation. Systematic benchmarks show that each module outperforms mainstream counterparts in its task, while retrospective validation establishes dual closed-loop verification of module-level accuracy and end-to-end workflow reliability. Applied to 30,364,908 Alex/ICSD-derived candidates, the framework identifies 97 high-performance candidates with room-temperature ionic conductivities of 0.109--59.0 mS/cm, including 94 halides, one borohydride, and two oxides. Consistency with independent experimental data confirms that 76 of the 94 halides fall within reported high-conductivity structural regions. Analysis reveals that Li$^{+}$ jump-network connectivity, rather than the number of geometric Li sites, is the core determinant of room-temperature ionic conductivity. Li-defect engineering effectively enhances oxide transport, whereas the inherent rigidity of the O$^{2-}$ framework suggests a potential upper limit on oxide electrolyte performance.

0.14

Differential Learning for Robust Prediction of Thermal Stability with Application to Energetic Materials

cs.LG physics.chem-phcond-mat.mtrl-sci ·2026-08-24 ·Megan C. Davis, R. Seaton Ullberg, Jeremy N. Schroeder, Andrew H. Salij, Marc J. Cawkwell +3 more
similarity 0.63
Abstract

Predicting thermal stability during handling and storage is essential for the design of safe and reliable energetic materials. However, experimental measurements vary significantly across laboratories due to differences in protocols and analysis methods, making it difficult to train reliable predictive models. We address this challenge through differential learning. Rather than predicting absolute decomposition temperatures, we instead train message passing neural networks to predict relative differences between pairs of molecules. This approach reduces sensitivity to systematic experimental errors and achieves >85% accuracy in ranking compounds by thermal stability, outperforming conventional regression methods on the same heterogeneous dataset. To understand what drives these predictions, we compare neural network models with interpretable alternatives built from descriptors derived from ab initio calculations and cheminformatics software. This analysis identifies bond dissociation enthalpy as a key determinant of thermal stability rankings, providing further insight into the complex chemistry of thermal decomposition. The differential learning framework generalizes across model architectures, from graph neural networks to classical descriptor-based approaches. Our results demonstrate that learning relative properties rather than absolute values offers a practical solution for modeling noisy experimental data, with direct applications in materials design where thermal stability predictions inform safety protocols.

0.33

DISSOLVR: An Interpretable and Fast Framework for Aqueous and Organic Solubility Prediction

cs.LG physics.chem-ph ·2026-10-01 ·Vansh Ramani, Har Ashish Arora, Dhairya Kuchhal, Sayan Ranu, Tarak Karmakar
top venuesurveybenchmark similarity 0.61
Abstract · 48 pages, 19 tables, 6 figures. Accepted to the 43rd International Conference on Machine Learning (ICML 2026)

High-fidelity solubility prediction is fundamental to pharmaceutical development and environmental partitioning, where accurate modeling must couple molecular structure with thermodynamic behavior across diverse chemical environments. However, recent advancements have been dominated by deep learning architectures that often sacrifice physical interpretability for predictive power. We challenge this trend by showing that state-of-the-art performance does not require such non-transparent architectures. To address this, we introduce DISSOLVR, a transparent framework for molecular solubility prediction. In addition, we perform a comprehensive literature review and a benchmarking study against various methods. We show that DISSOLVR approaches the aleatoric limit of experimental uncertainty and achieves OOD generalization through structural invariance, derived by mapping molecules to physically-grounded descriptors. Then, we present an LLM-assisted post-hoc explanation pipeline that bridges the gap between symbolic model artifacts and chemically grounded narratives. Finally, a comparative benchmark of a survey involving 22 expert chemists reveals that expert evaluators provide deep insights.

0.57

Solvating machine-learning interatomic potentials for solution-phase chemistry

cs.LG physics.chem-ph ·2026-10-12 ·Anton Z. Ni, Joonho Lee
similarity 0.58
Abstract · 19 pages, 7 figures, 11 tables

Most machine-learning interatomic potentials (MLIPs) are trained on gas-phase data, which limits their use for chemistry in solution. Here, we introduce AnySolv, a transferable implicit solvation potential that provides solvent-dependent energy and force corrections to existing gas-phase potentials without retraining them. It is trained on 1.4 million solvation energies and forces computed with density functional theory (DFT) and SMD in 36 solvents, spanning charged, open-shell, and transition-state structures. Because solvents are represented by continuous physical descriptors, AnySolv supports 179 solvents, including those absent from training. On external benchmarks, AnySolv reproduces DFT-SMD solvation energies to 2-4 meV mean absolute error at more than three orders of magnitude lower cost, and it matches the accuracy of DFT-SMD against experimental solvation free energies. This enables screening of the mechanisms of 120 nucleophilic aromatic substitution reactions in six phases as well as molecular dynamics simulations that reproduce the experimentally observed solvent-dependent conformational preferences of alanine dipeptide. By providing transferable solvation corrections to existing MLIPs, AnySolv enables scalable simulations of solvent-dependent chemical reactivity and molecular dynamics.

0.17

Atoms to Processes: The Role of Artificial Intelligence and Machine Learning in Chemical Engineering

cs.AI ·2026-10-01 ·Michael Baldea, Linda J. Broadbelt, Marianthi G. Ierapetritou, Akhilesh Jain, Ankur Kumar +15 more
published similarity 0.58
Abstract

The rapid maturation of artificial intelligence (AI) and machine learning (ML) has catalyzed a profound shift in how chemical engineering problems are formulated, analyzed, and solved. Advances in computing, data availability, and learning algorithms have enabled AI/ML methods to impact applications spanning atomic-scale simulations, materials and catalyst discovery, transport and thermodynamics, separations, process systems engineering, and industrial operations. This article provides a perspective on recent methodological developments and representative applications, emphasizing how AI/ML tools are being integrated with first-principles models to address challenges of predictive accuracy, data scarcity, extrapolation, interpretability, and model lifecycle management. Across domains, a unifying trend is the move away from purely black-box approaches toward hybrid and physics-informed frameworks that explicitly respect conservation laws, thermodynamic consistency, and known structural constraints. These approaches not only improve robustness and reliability, but also enable meaningful human-AI collaboration by providing information at an appropriate level of abstraction for the task and decision context. We conclude that AI and ML are not replacing the core principles of chemical engineering; rather, they are amplifying them. As the field advances toward increasingly autonomous, adaptive, and sustainable systems, the thoughtful integration of AI/ML with first-principles understanding and domain expertise will be essential to realizing their full potential across both research and industrial practice.

0.25

Comprehensive Workflow for Uncertainty-Aware Ionic Liquid Solvent Discovery

cs.LG cond-mat.mtrl-sci ·2026-10-12 ·Alexander Lobo, Urvi Awasthi, Leonid Zhukov
top venue similarity 0.57
Abstract · 10 pages, 5 figures, 5 tables. Accepted at IEEE ICDM 2026. Copyright 2026 IEEE. Personal use of this material is permitted. Permission from …

Designing synthesizable materials with targeted properties remains one of the central objectives in materials sciences. Ionic liquids (ILs) are well suited to this goal due to their "tunability", where physical and chemical properties can be precisely customized by modifying their molecular structure, specifically by varying the combination of cations and anions. At the same time, current data-driven property models for ionic liquids often degrade in scarce, noisy, and uneven data regimes, where measurements cover only a small fraction of chemical space and a limited range of thermodynamic conditions. This makes out-of-distribution screening brittle: even when point predictions look plausible, it is difficult to compare candidates consistently, quantify downstream implications, or trust rankings enough to guide molecular discovery. We present a property-prediction and optimal candidate selection workflow that treats data processing, deep learning modeling, and physics-based calculations as a coupled system, linking property prediction with uncertainty estimation and physics-based filtering. By tightening the link between predicted properties and the criteria used for down-selection, the workflow supports reliable out-of-distribution ranking and enables prioritization of previously untested ionic liquid candidates with favorable predicted trade-offs. We demonstrate the application of our workflow by designing novel ionic liquids for CO2 capture from flue gas, predicting their properties and selecting Pareto-optimal candidates based on CO2 solubility, IL viscosity and working capacity.

0.27

PRISM: Prior Relational Information for Self-supervised Modeling to Enhance Solubility OOD Generalization

cs.LG ·2026-10-19 ·Xinyi Chen, Jiahuan Pang, Titus Chima, Paul Weng, Wendong Wang
top venue similarity 0.57
Abstract · NeurIPS 2026, accepted

Solubility depends on intermolecular interactions between solutes and solvents, and is central to drug discovery, chemical and materials process engineering. Its prediction requires out-of-distribution (OOD) generalization to unseen solutes, solvents, and solvent mixtures, where supervised methods suffer from data scarcity, and existing self-supervised methods do not explicitly learn chemically meaningful relations. Learning chemically meaningful relational information without labels can alleviate data scarcity and improve OOD generalization, but remains challenging. We introduce Prior Relational Information for Self-supervised Modeling (PRISM) and apply it to solubility OOD generalization. PRISM is a label-free pretraining framework that converts expert-defined chemical priors into relational teachers. For solubility prediction, it trains four encoders to preserve the population-level relational information from priors capturing hydrophobic, electrostatic, polarizability, and substructural effects, using Kullback-Leibler (KL) divergence to match distance-based neighborhood distributions during pretraining. Across scaffold, solute, and solvent OOD settings, PRISM matches or surpasses supervised and self-supervised baselines. Under mixed-solvent OOD, freezing the four PRISM encoders and training a lightweight fusion-and-composition head outperforms strong baselines and substantially reduces run-to-run variation. Ablations and control studies confirm that gains stem from chemically meaningful relational structures baked into the encoders by PRISM. We expect this strategy of turning relational priors into self-supervision signals to extend beyond solubility prediction to domains where chemically or biologically meaningful relational priors are available.

0.34