CS Paper Radar

Closing the Loop on the Poppy Humanoid: Bipedal Locomotion with Linear-Quadratic Control and Learned Cost Functions

Xulin Chen, Borui He, Ruipeng Liu, Naveed Tahir, Zhenyu Gan, Garrett E. Katz

cs.RO ·submitted 2026-08-27 01:03 UTC · v1
publishedcode/data

Abstract

The Poppy Humanoid is an open-source, low-cost robot suitable for research and education in artificial intelligence. However, we are unaware of any published methodology that achieves reliable, unassisted bipedal locomotion on the standard Poppy hardware. This paper contributes a functional closed-loop walking controller for Poppy, based on the linear-quadratic regulator (LQR) framework for trajectory tracking. Starting with data collected from open-loop playback of a nominal walking trajectory, our proposed method learns a quadratic cost function for an LQR controller that substantially improves the reliability of the motion. The closed-loop controller is validated empirically, demonstrating statistically significant improvements in walking performance compared to open-loop trajectory playback.

Comment
Accepted by International Conference on the AI Revolution: Research, Ethics, and Society (AIR-RES 2026)

Closest papers

Nearest neighbours by meaning across the whole index.

STRIDE: Learning Humanoid Locomotion in Minutes with Acceleration-Based Rewards

cs.RO cs.LG ·2026-11-06 ·Nico Bohlinger, Jan Peters
similarity 0.71
Abstract

Learning locomotion directly on a humanoid robot is a promising direction to avoid the sim-to-real gap. However, locomotion rewards in Reinforcement Learning (RL) typically track the base velocity, which cannot be measured onboard without an external motion capture system or well-calibrated state estimator. This is why we introduce \method{}, which learns humanoid locomotion from minutes of samples with a reward that only requires the onboard Inertial Measurement Unit (IMU). Instead of tracking the base velocity, STRIDE rewards the robot for following a commanded acceleration profile. To learn efficiently from this reward, we use the off-policy RL algorithm XQC and combine a high gain setting for the joint position controllers with left-right symmetry augmentation. In simulation, STRIDE learns to walk on the Unitree G1 and Booster T1 humanoids within 14 minutes of samples. Compared to learning without these two components, it reduces the falls during training by 81%, while without them the robot learns only in over an hour.

0.11

ReCo: Response-Consistent Locomotion with Policy-Aware MPC for Legged Manipulation

cs.RO ·2026-10-01 ·Kuankuan Sima, Yichao Gao, Chenxi Gu, Kefan Zhao, Lin Zhao
benchmark similarity 0.69
Abstract

Continuous legged manipulation requires accurate end-effector tracking while the base keeps walking. Combining reinforcement learning (RL) with model predictive control (MPC) suits this task: the learned policy provides robust locomotion, while MPC coordinates the base and arm to compensate for tracking errors. However, MPC can compensate only for base motion that it can predict, and a learned policy's command response varies with gait phase, contact, and payload. We present ReCo, a framework that couples response-consistent locomotion with policy-aware MPC for legged manipulation. Response shaping trains the policy to respond to commands consistently and repeatably across randomized dynamics. An identified closed-loop response model then lets MPC jointly plan locomotion commands and arm motion. On the simulation benchmark, ReCo reduces position and orientation root-mean-square error (RMSE) by 28.7% and 27.4% relative to the best baseline for each metric. Real-world experiments demonstrate onboard continuous legged manipulation with coordinated base and arm motion.

0.17

Passive-Dynamic-Walking-Inspired Dynamics Guidance for Energy-Efficient Humanoid Locomotion

cs.RO ·2026-09-28 ·Hyeonjin Choi, Joongheon Kim, Daekyum Kim
similarity 0.68
Abstract

Learning energy-efficient humanoid locomotion requires discovering mechanically economical gait coordination, not merely reducing actuator effort. Reinforcement learning promotes efficiency through effort-related reward penalties, which guide the step-to-step mechanics of walking only indirectly. This article proposes a framework inspired by passive dynamic walking (PDW) that temporarily creates slope-equivalent conditions favorable to economical gait discovery and removes all PDW-specific guidance before nominal-dynamics optimization. During early training, a tilted-gravity field assists sagittal progression on flat collision geometry, complemented by curriculum-coupled reward terms. The core framework requires no reference trajectories, gait phases, or contact schedules. In a five-seed forward-locomotion study on a 29-DoF Unitree G1, the framework reduces mechanical cost of transport by 6.8-15.2% over commanded speeds of 0.5-2.0m/s without degrading velocity tracking. Mechanical-work decomposition attributes the reduction to positive actuator work, and reward-matched comparisons separate the guided regime's faster gait acquisition from the tilt's additional benefit to converged economy. The framework extends to unassisted omnidirectional locomotion, where its benefit persists once a walking-specific motion prior supplies kinematic coordination, the combination reducing speed-matched cost of transport by 18.7%. On hardware, forward cost of transport falls by 16.3% with the motion prior and by 4.5% without it, the latter within the trial-to-trial spread.

0.22

Beyond Policy Alignment: Closing the Planning-Learning Loop for Robot Control with Learned World Models

cs.RO ·2026-09-30 ·Kowndinya Boyalakuntla, Yuhan Liu, Abdeslam Boularias
benchmark similarity 0.67
Abstract · 8 pages

Planning with learned world models combines online trajectory optimization with learned value and policy functions for high-dimensional control. Because the planner determines the experience used for learning, while the learned critic and actor in turn score and propose future plans, planning and learning form a closed feedback loop. TD-MPC is a prominent instance of this design. Recent policy-constrained variants strengthen one part of the loop by aligning the learned policy with planner behavior. We introduce PL-MPC (Planning-Learning MPC), which additionally modifies critic supervision and planner terminal-value estimation. Hybrid multi-step TD targets expose critic updates to more realized rewards before bootstrapping; disagreement-aware terminal estimates reduce the influence of uncertain critic values during MPPI planning; and return-weighted actor distillation emphasizes planner-executed actions from high-return episodes. The world-model architecture and MPPI optimizer are otherwise unchanged. On HumanoidBench, the largest gains occur on \texttt{balance-hard}, where Total Average Return (TAR) increases from $98\pm18$ to $387\pm255$, and \texttt{hurdle}, from $199\pm13$ to $466\pm200$; performance across the broader benchmark remains task dependent, and PL-MPC remains competitive on DMControl. Controlled ablations show different component interactions across the two tasks. We further demonstrate zero-shot sim-to-real transfer on wrench-nut alignment with a 7-DoF KUKA IIWA14, obtaining higher observed success than TD-M(PC)^2 on the training object size and two unseen sizes. Code and data will be available at: https://pl-mpc-humanoid.github.io.

0.33

Model-Informed Safe Reinforcement Learning for Bipedal Locomotion via Step-to-Step Prediction

cs.RO ·2026-09-28 ·Victor Paredes, Ayonga Hereid
published similarity 0.67
Abstract · Accepted to IROS 2026

Humanoid robots promise versatile mobility in cluttered, human-centric environments, but real deployment demands principled safety. Classical model-based gait generators yield interpretable motions but often lack the robustness and adaptability of modern reinforcement learning (RL) based approaches. We propose a model-informed reinforcement learning framework anchored to the analytical Angular Momentum Linear Inverted Pendulum (ALIP) template. We provide a step-to-step safety certificate for ALIP stepping via a discrete exponential control barrier function (DECBF) and use it as (i) a training-time shaping signal and (ii) a runtime action filter that minimally adjusts swing-foot placement to satisfy template-level constraints. Full-order safety is evaluated empirically on the Digit humanoid in MuJoCo with a whole-body controller stack. Compared to an unconstrained baseline, our approach reduces safety-violation events in the reported external-disturbance trial, while larger lateral-velocity transients reveal a safety-tracking tradeoff.

0.33

Online iLQR-MPC with Whole-Body Control for Robust Humanoid Locomotion

cs.RO ·2026-11-03 ·Xiang Li, Linlin Ou, Ruihan Wu, Xinyi Yu
similarity 0.66
Abstract

Humanoid locomotion requires deciding where to step and how to distribute contact forces. However, a disturbance can invalidate the nominal plan, requiring coordinated revision under constraints that switch with every footfall. To solve this online, the proposed approach employs the single-rigid-body model, which retains attitude dynamics and the full contact wrench. An iterative linear-quadratic-regulator MPC (iLQR-MPC) then jointly optimizes contact forces and footstep locations in a single receding-horizon problem, without a separate step planner. Specifically, contact and motion constraints are incorporated into the backward pass through augmented-Lagrangian and relaxed-barrier penalties. A whole-body controller subsequently maps the plan to joint torques at 500 Hz while preserving contact feasibility. The model-based formulation makes disturbance responses interpretable through explicit costs and constraints, and requires no platform-specific policy training. In MuJoCo simulations, the iLQR-MPC replans at 100 Hz (mean solve time 8.9 ms); the Unitree G1 sustains steady-state walking and recovers from impulsive 245 N forward and 175 N lateral pushes.

0.18

Geometry-Aware Predictive Control for Walk-to-Run Bipedal Obstacle Crossing

cs.RO ·2026-10-11 ·Aashish Sahu, R. Prasanth Kumar
similarity 0.66
Abstract

This paper presents a geometry-aware predictive control framework for bipedal obstacle crossing across walking and running regimes. The proposed approach integrates a phase-structured trajectory generator with a constrained model predictive control (MPC) tracking layer to generate coordinated pelvis and swing-foot motions during obstacle traversal. The crossing process is represented through five interpretable phases: pre-crossing, leading-leg clearance, straddle, trailing-leg clearance, and recovery. Within this structure, swing-foot elevation is adapted as a function of obstacle height, while lateral stance widening and pelvis repositioning are introduced as functions of obstacle depth to improve transverse clearance and body alignment. A continuous gait-parameter evolution enables smooth walk-to-run transition without discrete controller switching. The generated references are tracked using MPC to regulate motion smoothness, clearance feasibility, touchdown behavior, and lateral admissibility. The framework is evaluated in reduced-order simulation over five progressively difficult obstacles under walking and running conditions. The robot successfully crosses the first four obstacles, achieving minimum body-obstacle clearances of 0.036, 0.036, 0.059, and 0.017 m, respectively. The fifth and most demanding obstacle leads to collision, identifying the current operating boundary of the proposed reduced-order formulation. Overall, the method provides a compact, interpretable, and computationally efficient basis for intelligent obstacle-aware bipedal locomotion.

0.24

Duty Factor Predicts Robust Constrained Quadrupedal Locomotion Across Gait Types

cs.RO ·2026-09-18 ·James Zhu, David Ologan, George Ortiz, Thomas Chun Fai Lee, Selvin Garcia Gonzalez +3 more
similarity 0.66
Abstract

Quadrupedal robots are increasingly deployed in environments where locomotion must remain robust to disturbances and constrained terrain. Gait type, such as walking or trotting, is commonly used to characterize quadrupedal locomotion. However, gait type does not uniquely define locomotion, as parameters such as duty factor, speed, and stance width can vary within a single gait type. In this work, we investigate the relationship between these gait parameters using three distinct quadrupedal locomotion control approaches. First, using whole body trajectory optimization with LQR feedback, we show that duty factor is a stronger predictor of local error convergence than nominal gait type. Second, we investigate duty factor selection with a learned locomotion controller, suggesting how duty factor may serve as a low-dimensional parameter for adapting locomotion robustness in narrow-terrain environments. Finally, we show that these trends persist under a centroidal model predictive control framework and validate them through narrow-terrain experiments on a physical quadruped. These results show that duty factor provides a simple and effective basis for understanding and selecting robust quadrupedal locomotion across gait types and control architectures.

0.27