CS Paper Radar

Rapid On-Robot Learning for Dynamic Manipulation Skills: Robot Juggling

Taeyoon Lee, Chunpeng Wang, Christopher G. Atkeson, Alfred A. Rizzi, Nicolas Rojas

cs.RO ·submitted 2026-08-27 08:39 UTC · v2

Abstract

We present an online learning framework that enables a bimanual robot to acquire diverse juggling patterns directly on physical hardware within minutes, even with a significant sim2real gap. One of the most important lessons from this work is that a model, even when far from reality, can be extremely useful for learning. This motivates a central philosophy of our approach: learning should build upon the robot's current knowledge rather than replace it. Our regularized memory-based learning puts this principle into practice by learning a local model from accumulated experience while retaining the global prior model to extrapolate where experience is sparse. This enables efficient and stable online learning from each new experience without resorting to uninformed exploration over a vast space of possible behaviors. Equally important to continual on-robot learning is safety, allowing the robot to repeatedly practice and improve in the real world. We construct a mutually reachable set that allows safe transitions between successive throws and catches, without driving either arm into a state from which its next action would require violating the robot's joint or actuator limits. Together, these ideas enable a bimanual robot with multi-fingered hands and onboard vision to safely learn and compose five canonical three-ball juggling patterns, including cascade, tennis, half-shower, shower, and box, within less than 5 minutes of real-world interaction. More broadly, this work points toward robots that build upon imperfect prior knowledge and continually refine their behavior through their own real-world experience.

Closest papers

Nearest neighbours by meaning across the whole index.

Dexterous In-Hand Object Pose Reaching with Learned Safety Filters

cs.RO cs.LGeess.SY ·2026-10-27 ·Ian Chuang, Hiya Shah, Vamsi Chilamkur, Iman Soltani, Claire Tomlin
code/data similarity 0.74
Abstract · 26 pages, 30 figures, 14 tables. Project page: https://ian-chuang.github.io/dexsafe/

Dexterous manipulation with multi-fingered hands is the next frontier of robotics, yet learned hand skills remain limited to simple grasps or basic repeated motions, such as rotating an object. As robots attempt more demanding in-hand maneuvers, safety, such as not dropping the object, becomes critical, yet it is rarely measured. We study in-hand object pose reaching, a task that demands diverse and difficult grasps: moving an object to almost any position and orientation within reach of the fingers, at any wrist orientation, through long sequences of consecutive goals. We present a recipe for training such policies for a LEAP hand in simulation without human data, built on a range of insights, from diverse resets and goals via generated grasp datasets to an adaptive friction curriculum. With careful system identification, the policies transfer zero-shot to the real hand, using either motion capture or a single wrist-mounted depth camera, and prove remarkably capable and robust. On top of the task policy, we add a learned residual safety filter with adjustable conservativeness, letting us tune the balance between performance and safety and greatly reduce object drops. In 13.3 hours of real-robot evaluation over 4,800 unseen goals across 4 objects and diverse wrist orientations, the state-based policy reaches 95.2% of goals within 2 cm and 0.4 rad, and the filter cuts its drops by 75% while still reaching 91.5% of goals. The policies can also spin a lightbulb held in an arbitrary pose, reach out-of-distribution goals, withstand fast arm motion and perturbations, and, needing only a wrist camera, serve as portable skills such as screwing in a lightbulb. We release the full recipe as a platform for studying performance, reliability, and safety in high-dimensional dexterous systems. Videos and more are available at https://ian-chuang.github.io/dexsafe/.

0.25

CIDER: Continual Interactive Distillation for Embodied Reinforcement Learning

cs.RO ·2026-08-22 ·Houlin Li, Minghui Xu, Guo Xu, Xuan Du, Xiaohan Yan +6 more
similarity 0.73
Abstract

Human-in-the-loop real-world reinforcement learning enables rapid acquisition of effective robotic manipulation policies for individual tasks, often within tens of minutes. Yet it remains unclear how to extend this paradigm to continual learning, where a single policy must acquire new skills without losing previously learned behaviors. Existing real-world continual learning methods do not explicitly constrain prior behaviors, leading to severe catastrophic forgetting. We introduce Continual Interactive Distillation for Embodied Reinforcement Learning (CIDER), a continual reinforcement learning framework that freezes the accumulated historical policy as a teacher before learning each new task and interleaves task learning with distillation-based retention. We further introduce gradient routing to separate the gradients used for acquiring new tasks from those used for preserving prior behaviors. We evaluate our method with a single shared actor on six real-world household and industrial manipulation tasks. Interactive Distillation maintains high measured success on previously learned tasks across our six-task real-robot sequence while acquiring each new task in 10 to 20 minutes, whereas every baseline forgets at least one previous task. Additional ablations reveal the key design choices that govern the tradeoff between stability and plasticity in real-world continual reinforcement learning.

0.40

PlayPolicy: Dexterity from Supervised Play

cs.RO cs.AI ·2026-10-15 ·Botao He, Yiming Dou, Yiannis Aloimonos, Jitendra Malik, Akash Sharma +1 more
code/data similarity 0.71
Abstract · Project page: https://play-policy.github.io/

How can robots autonomously collect the contact-rich experience needed to learn dexterous manipulation? We present PlayPolicy: Dexterity from supervised play (DSP), a framework in which a robot learns a play policy from minutes of human play through behavior cloning, then deploys it autonomously to collect hours of interaction data to train a world model. During inference, the same play policy then guides model-predictive control (MPC) by proposing candidate action sequences for evaluation under the learned world model. To accelerate inference, we also introduce a method for distilling a closed-loop, goal-conditioned policy through self-play within the learned world model. We evaluate this framework on underactuated pushing and any-to-any in-hand pose reorientation with a multifingered hand, in simulation and real world. In real world experiment, our method outperforms hindsight behavior cloning by 69.6% in success rate and achieves comparable success to reinforcement learning with 490 times less interaction data. These results demonstrate that supervised play can autonomously collect interaction data, guide model-based planning, and enable policy learning without any task-specific demonstrations or sim-to-real transfer. Project page: https://play-policy.github.io/

0.27

ARSTAG: An Agentic Real2Sim2Real System for Task-Specific Robot Data Generation

cs.RO ·2026-09-21 ·Bowei Li, Yuner Zhang, Changliu Liu
similarity 0.71
Abstract · 12 pages, 15 figures and tables. Project webpage: https://boweili666.github.io/ARSTAG/

Adapting visuomotor policies to new manipulation tasks often requires substantial manual engineering or teleoperated data collection. Simulation can provide task-specific data at scale, but constructing the scene, designing expert behavior, and configuring data generation still require significant per-task effort. We present ARSTAG, an agentic Real2Sim2Real system that turns a single RGB image and a natural-language instruction directly into robot policy-learning data. A hierarchy of language agents constructs a task-scoped simulation scene, generates robot-feasible demonstrations, and expands the training distribution through task-consistent randomization, while a coordinator agent manages cross-stage feedback and recovery. Across seven manipulation tasks spanning grasping, placement, and stacking, the ARSTAG-generated demonstrations enable sim-to-real transfer of three visuomotor policy architectures to a dual-arm robot, with pi0.5 achieving an average real-world success rate of 74.6%. Ablations show that task-consistent randomization substantially improves robustness, and policy performance increases with generated dataset size. Project webpage: https://boweili666.github.io/ARSTAG/.

0.52

Deliberate Practice: Learning Robot Skills under a Budget

cs.RO cs.AI ·2026-08-13 ·Shivam Vats, Sudarshan Harithas, Mete Tuluhan Akbulut, Arvind Raghunathan, George Konidaris
similarity 0.70
Abstract · 16 pages including appendices

We consider the problem of autonomously learning robot skills under a limited practice budget for sequential tasks. We propose an active skill learning algorithm, \emph{Deliberate Practice (DP)}, that computes a provably \emph{budget-optimal} allocation---practicing skills that maximize expected cumulative reward while being learnable within the budget. DP estimates both the time needed to master skills and the cumulative reward of the task plans that the skills unlock. Computing a budget-optimal allocation is challenging as it requires reasoning about combinatorially many skill plans over a large practice budget. Our key contribution is a bilinear program that can compute this exactly using off-the-shelf solvers. Through simulated and real-world experiments on long-horizon manipulation tasks, we show that our approach allows robots to optimally use limited practice time to acquire useful policies and improve long-horizon planning.

0.10

Skills in Weights, Memory in Code: Hybrid Learning for Memory-Dependent Robot Manipulation

cs.RO ·2026-08-10 ·Yunhao Zhao, Zhenyang Ni, Haoyang Chen, Ruohan Zhang, Qi Zhu
similarity 0.70
Abstract · 9 pages, 4 figures, and 3 tables

Modern vision-language-action (VLA) policies have acquired broad manipulation skills, but typically generate each action chunk from the current observation or a short fixed-length history. However, real-world manipulation is often non-Markovian, requiring robots to retain and reason over task-relevant information from long-horizon interaction histories to determine the next action. To address this challenge, we propose HyMeS, a hybrid learning framework that leverages the reasoning and memory-management capabilities of coding agents to steer a Markovian VLA for memory-dependent manipulation. Specifically, HyMeS learns low-level motor skills through gradient-based imitation learning, while a coding agent acquires high-level memory-management strategies through heuristic learning by iteratively updating an executable heuristic system from rollout feedback. Furthermore, we close the loop between steering and execution through multimodal stage-completion verification, which updates memory using proprioceptive signals and multi-frame VLM judgments. Compared with end-to-end memory-augmented VLAs, HyMeS requires demonstrations only for reusable motor skills rather than for every history-dependent task configuration, enabling data-efficient compositional generalization. On RoboMemArena, HyMeS improves mean cumulative success from 52.5% to 66.2% and mean task success from 41.3% to 60.1% over pi0.5, while outperforming PrediMem by 4.5 points in cumulative success and 14.5 points in task success.

0.46

DynaForge: Planning-Guided Residual Learning for Dynamic Manipulation Demonstration Generation

cs.RO ·2026-09-22 ·Yiyang Jin, Yu Zheng, Xiao He, Hesheng Wang
similarity 0.70
Abstract · 8 pages, 6 figures. Under review

Dynamic object manipulation is essential for robots operating in real-world environments, yet methods for generating high-quality demonstrations remain limited. Methods designed for static tasks do not readily transfer to dynamic settings. Among dynamic demonstration generators, planning-based methods can fail near contact, while DOMINO-style replay simplifies dynamic interactions and may limit the experience available for policy learning. We present DynaForge, a planning-guided framework that learns residual corrections for dynamic manipulation demonstration generation. DynaForge combines low-frequency global planning with high-frequency object-centric inverse kinematics across task phases, and applies a residual policy to correct actions during dynamic interaction. An implicit curriculum groups rollouts under matched conditions and selects mixed-success groups, focusing residual reinforcement learning on the evolving competence frontier. On Can and Bottle, it uses 0.73x as many optimizer steps as vanilla GRPO at the same nominal environment-step budget, with higher observed final success rates. Across nine simulation tasks, DynaForge increases mean demonstration-generation success from 41.30% of the planning prior to 78.37%. With 800 demonstrations per task, DP3 policies trained on DynaForge data achieve 49.11% mean success, compared with 7.07% for DOMINO data. On three real-world dynamic tasks, DynaForge-trained policies achieve 30-60% success, compared with 0-10% for DOMINO-trained policies, showing the ability of DynaForge for sim-to-real transfer.

0.24

F4R: Failure-Driven Recognition, Reconstruction, Refinement, and Redeployment for Continual Robot Self-Improvement

cs.RO cs.AI ·2026-09-28 ·Zhuoyuan Yu, Jiacheng Wang, Tianle Liu, Yihua Ren, Peng Yu +11 more
similarity 0.70
Abstract

The real-world performance of current vision-language-action models is fundamentally constrained by the limited coverage of expert demonstrations and their insufficient understanding of physical interactions. A common remedy is to collect additional real-world demonstrations of newly encountered failures. However, this process is costly, inefficient, potentially unsafe, and difficult to scale. To address this challenge, we propose Failure for Rising (F4R), a failure-driven real-to-sim-to-real closed-loop learning framework that converts real-world failures into targeted policy improvement. F4R first uses an agent to automatically identify and diagnose failures from rollouts. It reconstructs each failure as an interactive, object-centric table-top environment that preserves the task-relevant spatial and physical conditions. The policy is then refined through failure-conditioned sim-real co-training followed by targeted reinforcement learning in the reconstructed environments. The improved policy is subsequently redeployed, while newly observed failures are continuously fed back into the next reconstruction and learning cycle. Real-world evaluations on four manipulation tasks show that F4R achieves 93.75% In-Distribution and 90.0% Out-of-Distribution (OOD) success, outperforming the budget-matched Targeted BC baseline by 18.75 percentage points under OOD conditions without collecting additional real-world corrective demonstrations.

0.40