CS Paper Radar

MaCoPlanner: LLM-Assisted Manual-Compiled Task Planning with Proactive Safety Verification for Robotic Industrial Panel Operation

Guipeng Xin, Jiahe Xua, Mohammad Deghat, Chenhui Wan, Jie Liu, Youmin Hu, Zhongxu Hu

cs.RO cs.AI ·submitted 2026-08-28 13:03 UTC · v1

Abstract

Robotic industrial panel operation requires not only accurate control localization but also compliance with operating procedures, safety rules, and device-state constraints distributed across heterogeneous manuals. This study presents MaCoPlanner, a task-planning framework built on knowledge compiled from equipment manuals that converts equipment manuals into a typed intermediate representation, retrieves task- and state-relevant evidence, and uses it to support plan generation. Before actuation, candidate plans are symbolically rolled out and checked against procedural and state-transition constraints; detected violations are localized and returned for targeted repair, while unresolved plans are rejected. A separate execution interface grounds verified symbolic actions to physical controls and updates the device state. Under an independent evaluation oracle, MaCoPlanner achieves a final violation rate of 2.7%, and 26.3% of the runs in the repair analysis are rejected after exhausting the refinement budget. Compared with Raw-Manual, task success increases from 62.8% to 84.4% on Level-2 tasks and from 25.9% to 43.2% on Level-3 tasks. Experiments on a controller-panel simulator without an attached industrial load further demonstrate integrated execution feasibility under representative interaction conditions, without claiming industrial deployment readiness.

Closest papers

Nearest neighbours by meaning across the whole index.

PanelShield: Verifiable Closed-Loop Safe Planning for Robotic Industrial Panel Operation

cs.RO cs.AI ·2026-08-28 ·Guipeng Xin, Jiahe Xu, Chenhui Wan, Jie Liu, Youmin Hu +1 more
publishedbenchmark similarity 0.78
Abstract

Industrial panel operation is knowledge-intensive and safety-critical. Beyond control recognition and action generation, execution must satisfy constraints in operation manuals and safety regulations. While foundation-model-based planners show strong semantic capability, they typically lack computable, localizable, and reproducible mechanisms for violation detection and repair. To address this, we propose PanelShield, a verifiable closed-loop safety planning framework for manual-guided industrial panel operation. The framework generates parameterized action primitive sequences from task-relevant manual evidence and applies dual formal verification with LTL and a Safety FSM to enforce cross-step temporal correctness and local transition legality. When violations occur, it outputs a structured counterexample with the earliest violating step and cause, enabling targeted repair and re-verification. We build a multi-level long-horizon planning benchmark covering three representative industrial device panels, and evaluate the framework in simulation and real-world robotic experiments. Results show that PanelShield improves complex safety-constrained task performance over foundation-model-only planning baselines while reducing the violation rate to 2.7%, with 4.1 s total latency. Real-world experiments demonstrate end-toend feasibility. Overall, PanelShield offers a verifiable approach to robotic panel operation that balances flexibility, safety, and auditability.

0.31

APTree: Extended Behavior Trees for Adaptive and Scalable Automated Robotic Task Planning in Construction

cs.RO cs.AIcs.SE ·2026-10-13 ·Shermin Sherkat, Thomas Wortmann, Andreas Wortmann
published similarity 0.66
Abstract · Accepted for publication in The Journal of Systems and Software. 46 pages, 17 figures, 16 listings, 6 tables

Task planning for robots in off-site construction prefabrication is primarily manual, leading to planning inefficiencies and reluctance to adopt robotic solutions. Existing approaches provide limited support for scalable, modular automated task planning and localized runtime replanning. This paper proposes APTree, a model-driven framework that integrates automated task planning with modular task execution using behavior trees as the execution model. APTree repeatedly applies and coordinates heterogeneous symbolic planners to automatically generate and compose modular task plans at runtime. To support this approach, we develop a domain-specific language for the formal specification and validation of task plans, together with a compatible execution engine. We evaluate APTree on the real-world livMatS Biomimetic Shell pavilion, where it models the construction robotic fabrication domain, detects injected specification and planning errors at design time and runtime, and automatically generates large-scale task plans by coordinating three symbolic planners across numerous planning modules. A machine-checked formal analysis further shows that composed execution and local replanning are safe under explicitly stated assumptions, including planner soundness and non-interference of generated plans, providing practitioners with explicit conditions for dependable plan composition. APTree thus enables construction practitioners to leverage automated task planning without requiring detailed knowledge of symbolic planning techniques or APTree's internal implementation.

0.33

LOGIV: Graph-Verified Execution with Causal Local Repair for Long-Horizon Robot Tasks

cs.RO ·2026-10-29 ·Enqiao Lu, Yuxiang Xie, Xingrui Yu, Yuyang Wang, Yipeng Gu +8 more
similarity 0.65
Abstract · 14 pages. Updated related work, references, author list and affiliations

Agentic robots must turn a high-level goal into actions while keeping the physical conditions needed for future steps valid. A completed action does not ensure that its effects will persist: a later disturbance can invalidate support that the remaining plan still assumes. We present LOGIV, a graph engineering framework for agentic robot execution that uses an explicit task graph to connect symbolic planning, observation-based verification, and embodied action. LOGIV compiles a validated plan into condition-support and resource-ordering edges, checks their physical validity during execution, and uses dependency tracing to determine what must be restored after a failure. Repair is constrained by retained unfinished actions, and the combined continuation is symbolically validated before execution resumes. The framework operates above existing Vision-Language-Action (VLA) and World Action Model (WAM) policies without adding trainable components. Across 20 dual-arm tasks from RoboTwin V2 and BiCoord with three execution backbones, LOGIV improves mean task success without injected disturbances by 10.67 and 15.33 percentage points, respectively. Under predefined perturbations, it achieves higher task completion and condition restoration than three adapted recovery baselines for every backbone on both benchmarks. On three real-robot tasks, successful trials increase from 12/30 to 17/30. These results support explicit, continuously checked task dependencies as a practical interface for reliable agentic robot execution.

0.21

Make Code as Policy Great Again: Frontier Agents Write, Call, and Evolve Robot Tools

cs.RO cs.AI ·2026-09-30 ·Shijia Ge, Alex Zhou, Jianshu Zeng, Yexing Wan, Di Wu +10 more
highly cited similarity 0.65
Abstract

Frontier models can control robots, but reasoning through every reach, grasp, and retreat makes manipulation slow and token-intensive. We revisit code as policy with a different division of labor: models build executable tools, code handles multi-phase motions, and models decide what to do next. We introduce URAI (Universal Robot-Agent Interface), which couples a programming agent that constructs robot tools with an execution agent that uses them in a feedback loop. The programming agent writes reusable and task-specific tools from task intent and refines them through execution feedback and human guidance. The execution agent selects and parameterizes these tools from current observations; each call runs a complete motion locally before returning control to the agent. Unlike delegating subsequent decisions to a generated program, this design retains model-level decision-making between tool executions. Validated tool revisions persist across episodes without updating foundation-model weights, and a shared GUI and API make the same tools available to humans and agents. Across five RoboDojo tasks and four frozen execution agents, URAI raises aggregate success from 18.0% to 53.0% relative to direct fingertip control, with the largest gain on Swap Blocks; with the same tools, a program written in advance reaches only 24% against 56% for two agents deciding after each call. Three of the four agents also finish episodes 1.3-1.5 times faster with 1.5-1.7 times fewer execution-agent output tokens; DeepSeek-V4-Flash's cost barely changes. We further evaluate URAI on seven real-world AgileX dual-arm tasks, spanning object manipulation, cloth folding, and human-interactive tic-tac-toe. URAI connects the coding and decision-making capabilities of frontier agents, organizing robot control around reusable tools that agents can both invoke and revise.

0.44

Correctness Boundaries of Typed Plans for Natural-Language Robot Fleet Control

cs.RO ·2026-11-09 ·Artem Tuzov, Dmitrii Vizitei, Evgenii Shlomov, Senya Belykh, Anastasia Malakhova +1 more
benchmark similarity 0.65
Abstract · 18 pages, 3 figures

We examine what plan validation and execution reports establish in natural-language robot fleet control. Commands are traced through typed plans, deterministic corrections, fleet coordination and outcome checks in a three-level Robot Operating System 2 implementation with twenty simulated robots. An offline benchmark of 44 cases checks plan structure and selected command requirements. Across five local configurations without a response schema, 70.0-87.3% of responses pass. All runs in a selected 18-run simulation series meet their pose-based task conditions. This series includes two successful repeats that replaced incomplete runs after a software change. Saved plans and logs document duplicate pickup assignments and goal adjustments within the original task zones. Separate formation traces show a structurally accepted plan with the wrong formation shape and a rejected route, and an arrival report that omitted a requested robot after replanning. Carry completion records pickup and subsequent drop-off zone presence for the same robot. The cases distinguish changes to executable actions from changes to the requirements covered by a completion report. They motivate checking the effective assignments, goals and reported outcome against the original command.

0.19

Task-Specified Active Metrological Inspection with Measurement-Steered VLA Manipulation and Deterministic Evidence Gating

cs.RO cs.AIcs.CV ·2026-09-13 ·Zhiling Chen, Jingzhan Ge, Ruimin Chen, Matthew P. Castanier, David Gorsich +1 more
similarity 0.65
Abstract · 19 pages, 13 figures

High-mix low-volume (HMLV) manufacturing requires inspection systems to adapt to changing parts, specifications, and work orders without repeated task-specific programming. Existing inspection automation typically assumes predefined sensing sequences, while general purpose robot agents optimize task completion rather than the completeness and validity of metrological evidence. We formulate task-specified active metrological inspection and propose From Requirements to Admissible Metrological Evidence (FRAME), a hierarchical dual-arm framework that converts an inspection instruction and structured specification into traceable conformance evidence. FRAME coordinates learned manipulation with calibrated laser profilometry: a task manager grounds and schedules requirements, active surface correspondence verifies physical-to-specification localization, and evidence memory tracks measurement provenance, admissibility, and coverage. Learned components may propose inspection targets and physical access actions, but deterministic datum-grounded measurement, admissibility checks, coverage auditing, and conformance evaluation prevent incomplete or unverified evidence from authorizing PASS. A series of physical experiments shows that FRAME achieves higher end-to-end inspection reliability, fewer false accepts, and shorter task completion time.

0.25

GAVEL: Graph World Models for Verified and Efficient Long-Horizon LLM Task Planning

cs.RO cs.AI ·2026-09-16 ·Ruiyang Wang, Hao-Lun Hsu, Swarajh Mehta, Jiwoo Kim, Zhihao Dou +1 more
similarity 0.65
Abstract

Large language models (LLMs) provide a flexible interface for long-horizon robot planning, but generated plans often fail to respect embodiment constraints, recover from planning errors, or reason effectively under partial observability. We present GAVEL, a framework for verifying and repairing long-horizon LLM planning built around an explicit graph world model. The graph represents relevant object-relations, action pre-conditions and effects, and probabilistic beliefs over unobserved object locations. This model can predict the consequences of LLM-generated actions before execution, detect violations, and repair those whose corrections follow directly from the world model. This method also reserves LLM replanning solely for errors requiring semantic reasoning. For multi-task instructions, GAVEL reasons over distributions of possible object locations to reorder remaining subtasks and minimize expected search cost. We evaluate GAVEL on BEHAVIOR-1K across 100 single long-horizon tasks and 500 multi-task instructions. With Qwen3-8B, GAVEL improves single-task success from 41.2% to 91.8% and multi-task success from 19.9% to 92.6%. Distributional belief reasoning also reduces travel distance by approximately 5.4% compared with a static variant. These improvements show that an explicit graph world model harness can substantially improve the reliability and efficiency of long-horizon embodied planning across compact and frontier hosted LLM capabilities.

0.14

MANIGUARD: A Benchmark and Data Suite for Specification-Grounded Safety Evaluation and Improvement of Robotic Manipulation

cs.RO ·2026-08-18 ·Yiyan Peng, Philip Wang, Simon Sinong Zhan, Yiqi Lyu, Zhenyang Ni +9 more
benchmark similarity 0.64
Abstract

Foundation-model policies for robotic manipulation are advancing rapidly on task success, but rigorous evaluation of whether they succeed safely is still lacking. We introduce ManiGuard, a specification-grounded framework for evaluating and improving the safety of foundation-model manipulation, comprising the ManiGuard-Bench task suite and a paired safety-annotated trajectory-generation pipeline. ManiGuard-Bench organizes six contact-rich household task families into 200 locked base tasks along a skill $\times$ constraint taxonomy, with safety specified independently of task success. Each task is evaluated under one in-distribution and four single-axis out-of-distribution perturbations that hold the safety specification fixed, giving 1,000 locked scenarios. Every rollout is runtime-checked by LTL$_f$-grounded automaton monitors over physics-grounded predicates rather than learned classifiers or LLM judges, in simulation and on a physical Franka platform. The pipeline pairs an automated motion-planning generator with human teleoperation, annotated by the same per-step monitor, and directly supports safety-aware fine-tuning; we release 8,000 safety-annotated demonstrations, 40 per base task. Benchmarking zero-shot and fine-tuned VLAs across more than 23,000 rollouts, we find: (i) safety must be evaluated independently of task success, as 6-21% of successful rollouts violate the specification; (ii) fine-tuning on our suite raises safe task completion from near zero to 7.5-29.8% and engaged-and-safe behavior from 16-40% to 51-72%; but (iii) a gap remains that scaling demonstrations does not close, with 21-42% of engaged rollouts still violating, two of six families below 2% safe success for every policy, and these failures persisting under distribution shift and on hardware.

0.50