CS Paper Radar

Task-Specified Active Metrological Inspection with Measurement-Steered VLA Manipulation and Deterministic Evidence Gating

Zhiling Chen, Jingzhan Ge, Ruimin Chen, Matthew P. Castanier, David Gorsich, Farhad Imani

cs.RO cs.AIcs.CV ·submitted 2026-09-13 01:20 UTC · v1

Abstract

High-mix low-volume (HMLV) manufacturing requires inspection systems to adapt to changing parts, specifications, and work orders without repeated task-specific programming. Existing inspection automation typically assumes predefined sensing sequences, while general purpose robot agents optimize task completion rather than the completeness and validity of metrological evidence. We formulate task-specified active metrological inspection and propose From Requirements to Admissible Metrological Evidence (FRAME), a hierarchical dual-arm framework that converts an inspection instruction and structured specification into traceable conformance evidence. FRAME coordinates learned manipulation with calibrated laser profilometry: a task manager grounds and schedules requirements, active surface correspondence verifies physical-to-specification localization, and evidence memory tracks measurement provenance, admissibility, and coverage. Learned components may propose inspection targets and physical access actions, but deterministic datum-grounded measurement, admissibility checks, coverage auditing, and conformance evaluation prevent incomplete or unverified evidence from authorizing PASS. A series of physical experiments shows that FRAME achieves higher end-to-end inspection reliability, fewer false accepts, and shorter task completion time.

Comment
19 pages, 13 figures

Closest papers

Nearest neighbours by meaning across the whole index.

MaCoPlanner: LLM-Assisted Manual-Compiled Task Planning with Proactive Safety Verification for Robotic Industrial Panel Operation

cs.RO cs.AI ·2026-08-28 ·Guipeng Xin, Jiahe Xua, Mohammad Deghat, Chenhui Wan, Jie Liu +2 more
similarity 0.65
Abstract

Robotic industrial panel operation requires not only accurate control localization but also compliance with operating procedures, safety rules, and device-state constraints distributed across heterogeneous manuals. This study presents MaCoPlanner, a task-planning framework built on knowledge compiled from equipment manuals that converts equipment manuals into a typed intermediate representation, retrieves task- and state-relevant evidence, and uses it to support plan generation. Before actuation, candidate plans are symbolically rolled out and checked against procedural and state-transition constraints; detected violations are localized and returned for targeted repair, while unresolved plans are rejected. A separate execution interface grounds verified symbolic actions to physical controls and updates the device state. Under an independent evaluation oracle, MaCoPlanner achieves a final violation rate of 2.7%, and 26.3% of the runs in the repair analysis are rejected after exhausting the refinement budget. Compared with Raw-Manual, task success increases from 62.8% to 84.4% on Level-2 tasks and from 25.9% to 43.2% on Level-3 tasks. Experiments on a controller-panel simulator without an attached industrial load further demonstrate integrated execution feasibility under representative interaction conditions, without claiming industrial deployment readiness.

0.26

INSPECT: Learning Robot View Selection from Assistant Use

cs.RO cs.CV ·2026-09-17 ·Di Wen, Kailun Yang, Wenhao Guo, Yitian Shi, Junwei Zheng +5 more
code/data similarity 0.64
Abstract · 9 pages, 3 figures, 5 tables. Code: https://github.com/Kratos-Wen/INSPECT

Robots inspecting an assembly must determine which parts are present and whether they are correctly installed. During egocentric assembly assistance, head motion and workpiece handling reveal evidence for these checks, while spoken state confirmations link observations to procedural outcomes. We introduce INSPECT, which learns robot view preferences from records of a smart-glasses assistant that answers part queries and provides next-step guidance. Presence-Invariant TwinSwap (PI-TwinSwap) calibrates object evidence through paired identity interventions. Claim-indexed supervision separates evidence requirements from camera-reproducible observation changes. Object-centered calibration adapts relative view preferences to robot poses, while clause-level screening checks predicted evidence. The robot selects views using only its current observation and known poses, without candidate images. Evaluation uses annotated assistant-video replay to simulate state feedback, without target-domain view labels for policy training. On images of physical gearbox assemblies, INSPECT achieves the highest view utility among the compared non-oracle policies and raises human-rated full verifiability from 34.8% to 41.7% compared with keeping the current view. On commercial angle-grinder recordings in IMPACT, the transferred relative-view selector increases the correct decision rate from 50.6% to 54.3% with a frozen perception head. The source code is available at https://github.com/Kratos-Wen/INSPECT.

0.64

Making Self-Driving Laboratories Auditable:A Unified Framework for Hybrid Actions,Measurements, and Safe Execution

cs.RO cs.AI ·2026-10-27 ·Zihan Zhang, Zeyu Wu, Xin Zhang, Mingyu Luo, Haohui Que +1 more
benchmark similarity 0.63
Abstract

Self-driving laboratories (SDLs) are laboratory systems that couple experimental planning, automated execution, and measurement feedback in a closed loop. Integrating flexible robot control with the typed application programming interfaces (APIs) and continuous measurements exposed by laboratory instruments remains an execution-interface challenge. To address this challenge, we propose a traceable framework comprising four components: LAM (Lab Action Model), OpenSDL, Safe-SDL, and L3-Bench. LAM is a proposed measurement-conditioned policy architecture that extends vision-language-action paradigms to generate both continuous robot trajectories and typed instrument API calls. OpenSDL is an execution substrate with an initial control implementation, designed to map role-level operations to heterogeneous devices, coordinate execution, and record timestamped causal events. The proposed Safe-SDL runtime gate combines pre-dispatch schema and resource checks with signal temporal logic monitoring during execution, including extended waiting periods. L3-Bench (Level-3 Laboratory Benchmark) specifies an episode-level evaluation protocol covering physical outcomes, timing, reproducibility, safety violations, and fault recovery. Together, these components provide an end-to-end design for linking hybrid action generation, monitored device execution, measurement feedback, and experimental evaluation, addressing coordination and traceability challenges in SDL workflows.

0.21

PIER: An Evidence-Gated Execution Interface for Robotic Manipulation

cs.RO ·2026-10-08 ·Zoe Li, Anze Wang, Zhongyu Chen, Jingran Hu
similarity 0.62
Abstract · 8 pages, 4 figures. Ancillary files include reproducibility code and retained experimental records

Generating a plausible robot action does not establish that current observations justify its execution. Motivated by exploratory observations of high-confidence visual outputs under severe occlusion, we present PIER, an execution-authorization interface that separates evidence checks, decision provenance, and stage-scoped re-observation from hardware control. The deterministic gate evaluates declared visual and tactile inputs, while its caller maintains a budget of at most one re-observation per stage. We evaluate the implementation using 1,600 threshold-grid cases and 1,200 paired synthetic traces spanning score noise, missing tactile inputs, stale observations, and falsely reassuring scores. The finite grid yields zero declared invariant violations, and a matched Boolean baseline reproduces all non-recovery decisions. Under synthetic score noise, re-observation reduces valid-state denials from 57/120 to 18/120 while increasing invalid-state proceeds from 5/120 to 7/120. Stale and falsely reassuring inputs expose limitations that threshold checks alone cannot resolve. Exploratory visual, tactile, and robot setup records provide context but do not establish physical task performance. These results characterize an inspectable authorization interface and its input-contract limitations, without claiming superiority over equivalent rule logic, calibrated tactile accuracy, or certified physical safety.

0.24

When Better Policies Leave Harder Failures: Coverage Shift in VLM Success Monitoring

cs.RO ·2026-10-17 ·Isabel Guan, Dingyuan Zhang, Shipeng Lyu, I-Ming Chen
similarity 0.62
Abstract · 20 pages, including 10 pages of supplementary material

Can a better robot policy become harder to monitor? We study a fixed vision-language model (VLM) that judges success while a policy improves. In a controlled 20-seed tray-placement experiment, training selects only simulator-verified successes. Success rises from 66.8% to 97.0%, and accepted hover failures fall from 5.0% to 0.9% of executions. Yet the judge accepts 50.0% of remaining hovers, versus 31.1% under untrained sampling. These residual failures more often lie below the tray rim, which can conceal the gap beneath a grasped cube. A separate boundary probe accepts 148/160 below-rim hovers and 0/160 above-rim hovers. We call this change in conditional monitoring sensitivity coverage shift: learning changes which failures reach a fixed judge. A broader diagnosis covers nine judges and 1,392 stimuli. Judge-filtered experiments across eight settings further show heterogeneous effects of state-dependent acceptance. The results distinguish task improvement from failure detectability and motivate reporting absolute misses, conditional misses, and audit coverage together.

0.22

PanelShield: Verifiable Closed-Loop Safe Planning for Robotic Industrial Panel Operation

cs.RO cs.AI ·2026-08-28 ·Guipeng Xin, Jiahe Xu, Chenhui Wan, Jie Liu, Youmin Hu +1 more
publishedbenchmark similarity 0.62
Abstract

Industrial panel operation is knowledge-intensive and safety-critical. Beyond control recognition and action generation, execution must satisfy constraints in operation manuals and safety regulations. While foundation-model-based planners show strong semantic capability, they typically lack computable, localizable, and reproducible mechanisms for violation detection and repair. To address this, we propose PanelShield, a verifiable closed-loop safety planning framework for manual-guided industrial panel operation. The framework generates parameterized action primitive sequences from task-relevant manual evidence and applies dual formal verification with LTL and a Safety FSM to enforce cross-step temporal correctness and local transition legality. When violations occur, it outputs a structured counterexample with the earliest violating step and cause, enabling targeted repair and re-verification. We build a multi-level long-horizon planning benchmark covering three representative industrial device panels, and evaluate the framework in simulation and real-world robotic experiments. Results show that PanelShield improves complex safety-constrained task performance over foundation-model-only planning baselines while reducing the violation rate to 2.7%, with 4.1 s total latency. Real-world experiments demonstrate end-toend feasibility. Overall, PanelShield offers a verifiable approach to robotic panel operation that balances flexibility, safety, and auditability.

0.31

Labference: Benchmarking the Reasoning-Action Connection in Robotic Laboratories

cs.RO ·2026-10-26 ·Shitong Liu, Xu Yang, Jingwei Zhang, Sheng Lian, Xinyu Zhuang +16 more
benchmark similarity 0.60
Abstract · Update project address

Realizing Embodied AI for Science requires robots to translate experimental goals into reliable physical procedures, reducing hazardous and repetitive human work while generating evidence for scientific discovery. Although language-based planning and learned manipulation provide complementary capabilities, their integration requires robots to adapt subsequent operations to actual execution outcomes. For example, an unsuccessful placement changes what must be done next, even when the experimental goal remains unchanged. Existing benchmarks assess planning, manipulation, and laboratory workflows through task completion and reasoning or execution metrics; however, aggregate performance leaves the connection between outcome-dependent choices and physical execution unresolved. To address this evaluation gap, we introduce Labference, a benchmark for evaluating how observed physical outcomes guide subsequent choices and how those choices translate into robotic laboratory actions. Its evaluation protocol is designed to test outcome-dependent behavioral adaptation through controlled evidence variations, while independently measuring operation selection, physical execution, and task completion. Matched Oracle-assisted continuations from shared checkpoints then assess which forms of support improve subsequent choices and task completion. Initial weighing evaluations reveal target-selection errors in the tested VLA policies despite successful object transfers, whereas GPT-driven control achieves correct selection but encounters execution failures and substantial computation costs. Together, these findings highlight the need to connect task-appropriate reasoning with reliable, timely action. By making this connection measurable and diagnosable, Labference supports targeted improvements toward autonomous experimentation for Embodied AI for Science.

0.17

LIBERO-Industry: Benchmarking Robotic Manipulation under Industrial Process Constraints

cs.AI ·2026-10-12 ·Ming Shin Cindy Sung, Duan Leijiahao, Haoxiang Wang, Boning Tan, Liangna Fu +7 more
benchmark similarity 0.59
Abstract · 38 pages, 14 figures, 20 tables, including appendices. Project website: https://IAIE-PhysicalAI.github.io/LIBERO-Industry/

Industrial manipulation in flexible manufacturing, e.g., high-mix, low-volume (HMLV) electronics assembly, requires robot policies to adapt to changing products and production conditions. Such settings impose industrial process constraints, including product variants, moving material flows, finite execution windows, and tight geometric tolerances. However, existing evaluation frameworks do not systematically capture these constraints when assessing generalist robot policies. To address this gap, we introduce LIBERO-Industry, a novel benchmark built on the widely used robot learning benchmark LIBERO, that translates the aforementioned industrial constraints into controllable task conditions and measurable success criteria. Specifically, LIBERO-Industry comprises three classic task scenarios: Static-to-Dynamic (S2D) loading, Dynamic-to-Static (D2S) unloading, and Dynamic-to-Dynamic (D2D) transfer. The suites contain 216 tasks in total that systematically vary object geometry, conveyor speed, interaction-window duration, and geometric acceptance region size. Extensive experiments across five generalist robot policies (including vision-language-action models and world-action models) show that performance progressively degrades as industrial constraints are introduced and combined. Under a shared fine-tuning and evaluation protocol, the LIBERO-Industry co-training condition achieved higher observed target-transfer completion than the original-LIBERO condition.

0.35