CS Paper Radar

Prompt-Guided Interactive Segmentation of Interstitial Lung Disease in Thoracic CT

Vasilis Dedousis, Lubnaa Abdur Rahman, Lorenzo Brigatο, Ethan Dack, Andreas Christe, Christoph Frank, Manuela Funke-Chambour, Justus Roos, Adrian Huber, Lukas Ebner, Stavroula Mougiakakou

cs.CV ·submitted 2026-08-28 15:43 UTC · v1
code/data

Abstract

Accurate segmentation of interstitial lung disease (ILD) patterns is essential for quantitative disease assessment and longitudinal monitoring. However, existing approaches remain limited by relying on dense annotations and producing static predictions that cannot be refined, motivating interactive approaches. While promptable models show promise in interactive segmentation, their adaptation to ILDs remains largely unexplored. To address this gap, we investigate prompt-guided foundation models for ILD refinement and present, to the best of our knowledge, the first adaptation of MedSAM2 for interactive 3D ILD segmentation on thoracic CT. We investigate three fine-tuning strategies and multiple clinically motivated prompts: bounding-boxes (BBox), point, lasso, and scribble. On a dataset spanning seven ILD patterns and healthy lung tissue, full model fine-tuning performed best, improving the average Dice score by 4.7 percentage points over MedSAM2.While BBox prompts achieve the strongest performance, non-native MedSAM2 interactions such as lasso and scribble prompts also prove effective. Finally, we present and evaluate a proof-of-concept end-to-end workflow in which MedSAM2 is initialized from an automatic segmentation prior and subsequently refined using radiologist prompts. Model weights and plug-ins made available at: https://github.com/AIHNlab/ILD-SemiSegTool.

Closest papers

Nearest neighbours by meaning across the whole index.

What Matters is the Prompt: Prompt Sensitivity and Prompt Generation in Foundation Models for Lung Nodule Segmentation

eess.IV ·2026-08-17 ·Jorge F. Lazo, Xixi Liu, Andreas Hallqvist, Mikael Johansson, Åse Johnsson +3 more
similarity 0.77
Abstract

Lung nodule segmentation in computed tomography is essential for extracting clinically relevant information for lung cancer assessment and treatment planning. Foundation models have shown notable segmentation capabilities, but state-of-the-art approaches often depend on input prompts, such as points or boxes, making their performance sensitive to prompt quality and placement. Understanding the limitations and constraints of prompt-based foundation models is therefore essential for designing reliable medical image segmentation solutions. In this work, we investigate how prompt quality affects foundation models performance for lung nodule segmentation. We further propose a synthetic prompt-generation model to test if the dependence on manually provided prompts can be mitigated by generating synthetic prompts that can also improve segmentation performance. Perturbation experiments show that bounding box prompts generally outperform point prompts, while latest specialized medical imaging models achieve better performance than general purpose ones. The proposed approach obtains a Dice coefficient of 0.85, suggesting that synthetic prompt generation as a promising strategy for lung nodule segmentation with foundation models.

0.26

Pretrained, Curriculum-Tuned, and Ensembled: A Tracer-Aware Interactive Segmentation Pipeline for AutoPET V

cs.CV cs.AI ·2026-08-31 ·Xinglong Liang, Chunyao Lu, Tianyu Zhang, Jiaju Huang, Tao Tan +2 more
code/data similarity 0.70
Abstract

Interactive lesion segmentation in whole-body PET/CT requires a model to provide a strong initial prediction while also responding efficiently to sparse corrective scribbles during inference. This setting is particularly challenging because tracer distributions, physiological uptake patterns, lesion appearance, and acquisition characteristics differ substantially between FDG and PSMA studies. We present TRIAGE, Tracer-aware Refinement via Interactive Anatomy-Guided sEgmentation. The core backbone is a 3D STU-Net initialized through masked autoencoding pre-training with an asynchronous masking strategy, aiming to learn transferable anatomical and cross-modal representations before task-specific fine-tuning. In parallel, we train an auxiliary organ segmentation model whose predictions provide explicit anatomical context and help distinguish physiological uptake from malignant lesions. A dedicated tracer classifier first routes each study to an FDG- or PSMA-specific branch. Within each branch, a first-stage segmentation model consumes CT, PET, and organ context to generate an initial lesion mask. The initial prediction is then combined with cumulative foreground/background scribbles and refined by a second interactive segmentation network. The FDG and PSMA branches share the same overall processing pipeline but are trained independently to account for tracer-specific appearance and error modes. We additionally employ curriculum-style training and model ensembling to improve robustness across interaction steps and heterogeneous cohorts. Experiments are conducted using the official AutoPET V data and ten-fold split; quantitative results, ablations, and final test-set performance are left as placeholders to be completed after the challenge evaluation. Code: https://github.com/Liiiii2101/AUTOPET2026-MEDAI.

0.24

Anatomy-Aware Prediction of Bronchoscopic Accessibility from 3D CT

cs.CV ·2026-09-29 ·Linkai Peng, Cuiling Sun, Bin Wang, Jamie Rowell, Catherine Gao +8 more
top venuebenchmark similarity 0.69
Abstract · Accepted in MICCAI 2026

Pre-operative planning for bronchoscopy is critical for the diagnosis of lung lesions. Current accessibility assessment relies on subjective manual inspection of CT scans, which is time-consuming and prone to inter-observer variability. In this paper, we formalize bronchoscopy accessibility prediction as a novel supervised learning task and present the first end-to-end framework to address it. We propose an Anatomy-Aware Mixture-of-Experts (MoE) model that integrates specialized modules: a CT Expert for local morphological features, a Lobe Expert for anatomical priors, and a Path Geometry Expert that encodes the sequential constraints of the bronchial tree. To support this task, we curated the first clinical dataset of 438 cases with pre-operative CT scans and documented procedural outcomes. Experimental results demonstrate that our method achieves an AUROC of 0.8052, significantly outperforming both state-of-the-art baselines and experienced human experts. This work establishes a new benchmark for computer-aided interventional planning in pulmonary medicine. Our data and code will be publicly available at https://nubagcilab.github.io/BronchoAccess/.

0.37

LeCor: Learning to Be Corrected by Meta-Learned Test-Time Training for Interactive 3D Lung-Tumour Segmentation

cs.CV cs.LG ·2026-09-08 ·Yi Luo, Yike Guo, Wenxuan Li, Zongwei Zhou, Rui Zhang +1 more
similarity 0.68
Abstract · 18 pages, 4 figures

Delineating lung tumours on computed tomography (CT) takes a considerable share of the time spent on radiotherapy planning, and a contour proposed by a model can be refined interactively by the clinician. Promptable foundation models such as SAM 3 support this workflow by writing each correction into a session memory that conditions the remaining slices, while the model weights stay fixed. On 690 test cases from five public CT cohorts, fine-tuning SAM 3 on lung tumours raises the Dice obtained from a single point prompt from 0.298 to 0.757, and seven rounds of corrections raise it further to 0.765, but under memory conditioning alone the accuracy on slices the annotator has not touched stops improving after six rounds. We therefore treat each correction as a training signal and propose LeCor, which performs test-time training on a small set of case adapters that are reset for every case and meta-learned such that a single gradient step driven by a click improves the slices that were not clicked. On the 133 test cases that span at least eight slices, LeCor raises the Dice reached after seven correction rounds from 0.787 with the fine-tuned model to 0.827, reduces the number of cases that never reach a Dice of 0.80 from 47 to 27, and reaches in three correction rounds the accuracy that the fine-tuned model attains in seven.

0.21

NoduleFlow: Automatic 3D Lung Nodule Detection and Segmentation

cs.CV ·2026-10-12 ·Giulia Romoli, Filippo Ruffini, Francesco Di Feola, Valerio Guarrasi, Matteo Tortora +1 more
similarity 0.68
Abstract

Low dose Computed Tomography (CT) is the standard imaging modality for lung cancer screening. On CT scans, lung cancer typically manifests as pulmonary nodules, whose manual identification is time-consuming and prone to observer variability, image quality limitations, and suboptimal reading conditions. Moreover, subtle temporal changes are often difficult to quantify reliably in CT scans from the same patient across follow-up examinations. Deep learning-based approaches for the automatic detection and segmentation of lung nodules have demonstrated improved accuracy and efficiency. However, most existing approaches provide only coarse region-of-interest localisation, rely on prior lesion annotations or human supervision, or treat detection and segmentation as separate tasks. In this work, we present NoduleFlow, a framework for lung nodule detection, classification, and segmentation directly from series of CT volumes. Our proposal consists of four interconnected modules and operates in an automated manner at inference time, without requiring prior lesion annotations, manual initialisation, or region-of-interest pre-selection. We further investigate whether nodule localization benefits from the propagation of candidate regions across follow-up scans through inter-scan registration fields, as opposed to conventional independent per-scan analysis. The generalisability of the framework is systematically evaluated across four independent datasets. The results underscore the potential of automated pipelines for lung nodule analysis in screening and diagnostic settings.

0.14

Annotating anatomy and pathology in the National Lung Screening Trial computed tomography images

eess.IV ·2026-09-09 ·Deepa Krishnaswamy, Vamsi Thiriveedhi, Suraj Pai, David Clunie, Igor Octaviano +4 more
similarity 0.68
Abstract

Large-scale public medical imaging datasets contribute critically to translational research. When accompanied by rich clinical and multi-omics data, they can stimulate exploratory research and enable secondary analyses. Expert annotations of such imaging collections can support the development of new image analysis tools. Continuous enrichment of images with image-derived data makes them more usable for researchers without expertise in image analysis or access to large-scale computational resources. The National Lung Screening Trial (NLST) released a rich longitudinal dataset that includes Computed Tomography (CT) images for over 26,000 patients. We introduce three Digital Imaging and Communications in Medicine (DICOM) formatted datasets, complementing NLST CT images, shared as analysis results in the National Cancer Institute Imaging Data Commons (IDC). Two of those (IDC NLSTSeg and IDC NLSTSybil) contain DICOM-harmonized annotations and extracted measurements (for 581 and 601 NLST patients, respectively) shared earlier using research formats (Sybil and NLSTseg). The third one (TotalSegmentator-CT-Segmentations) contains volumetric segmentations generated using TotalSegmentator and radiomics features for each segment for 26,194 NLST patients.

0.18

SAMI3D-DW: Interactive Segmentation of Any 3D Medical Images

cs.CV ·2026-09-22 ·Ping Gong, Shiyuan Su, Fandong Zhang, Xinchen Han, Haowei Sun +2 more
benchmark similarity 0.67
Abstract · 28 pages, 5 figures; replacement version with reordered category-level Dice scores presentation to better reflect clinical conventions., cla…

Interactive segmentation of 3D medical images supports quantitative analysis of anatomical structures and disease while allowing users to specify and refine their targets. Despite substantial progress by nnInteractive and VISTA3D, reliable segmentation across diverse clinical targets remains challenging, particularly for complex anatomical structures and the heterogeneous, long-tailed spectrum of pathology. We present SAMI3D-DW V1 (hereafter SAMI3D-DW), an interactive 3D segmentation model trained on Deepwise's large-scale proprietary medical image datasets. We evaluate the model under simulated user interactions on a CT/MR benchmark comprising 4,326 cases from 219 source datasets, spanning 107 anatomical and pathological categories, organized by a medical taxonomy and evaluated with a category-balanced DSC score. SAMI3D-DW achieves the highest category-macro Dice among evaluated methods in both interaction modes. With one point, it scores 0.5756 versus 0.5316 for nnInteractive, the strongest baseline, rising to 0.7771 versus 0.7495 with five points. With bounding-box initialization, the scores are 0.7129 versus 0.6530. After five corrective clicks, SAMI3D-DW reaches 0.8004 versus 0.7868. For radiologists and clinicians, SAMI3D-DW enables segmentation of complex anatomical structures, including intracranial vessel trees on CT and MR angiography, with a few clicks. In a preliminary in-house comparison involving neurofibromatosis type 1 (NF1), SAMI3D-DW-assisted tumor annotation took minutes per case and approximately one-fifteenth of the time required for manual annotation, highlighting its potential to support volumetric treatment-response assessment.

0.23

Anatomical Prior-Guided Routing for 3D Lung Tumor Segmentation

cs.CV ·2026-10-29 ·Uihyeon Maeng, Jonghun Kim, Hyunjin Park
published similarity 0.67
Abstract · Accepted to ACCV 2026 (Oral), 18 pages, 6 figures

Accurate lung tumor segmentation in computed tomography (CT) is essential for treatment planning, response assessment, and quantitative imaging analysis. However, 3D lung tumor segmentation remains challenging because tumors occupy only a small portion of the whole volume and exhibit heterogeneous appearances across anatomical locations. In patch-based training and sliding-window inference for 3D medical image segmentation, location-dependent heterogeneity is further amplified because cropped image patches provide limited global anatomical context, making it difficult for a model to adapt its feature processing according to the anatomical region from which each patch is extracted. To address this limitation, we propose an Anatomical Prior-guided Routing Module (APRM) for lung tumor segmentation. For each image patch, we obtain anatomical prior information of regional occupancy and deterministically select an anatomical routing gate. The selected gate then performs sparse feature routing over a shared expert adapter pool, enabling anatomy-specific feature adaptation while sharing expert capacity across regions. We evaluate APRM on two datasets with various backbone networks and demonstrate consistent improvements over baseline models. Furthermore, feature visualizations show that APRM produces different feature responses depending on patch location, indicating that the proposed routing mechanism effectively adapts feature processing according to anatomical context.

0.26