CS Paper Radar

Reactive Peripheral Modeling for Faithful Firmware Rehosting

Qinying Wang, Florian Hofhammer, Eduard Vlad, Jianqiang Wang, Marcel Busch, Shouling Ji, Mathias Payer

cs.CR ·submitted 2026-08-30 11:54 UTC · v1

Abstract

Rehosting enables tight control and introspection for firmware testing, but existing approaches largely fail to reach deeper application states and cannot drive embedded protocol stacks beyond early-stage initialization. This limitation reflects a broader weakness in current rehosting techniques: their inability to faithfully model complex peripheral semantics and dependencies. In particular, existing work typically relies on passive approximations of peripheral behavior and overlooks three key aspects: (i) the interplay among interrupts, MMIO, and DMA; (ii) implicit state transitions within peripherals; and (iii) interactions across multiple peripherals. To address this challenge, we propose Reactive Peripheral Modeling (RPM), an abstraction that models hardware peripherals as reactive and stateful systems. RPM captures peripheral behavior using event-condition-action semantics, enabling faithful representation of interrupt, MMIO, and DMA scheduling, implicit state transitions, and cross-peripheral interactions. We implement RPM in Bluezz for BLE firmware rehosting and fuzzing, and show that reactive modeling is necessary to reach deep protocol states. We evaluate Bluezz on representative BLE stacks, including NimBLE, Zephyr, and Nordic SoftDevice, a closed-source commercial stack. Across 18 targets, Bluezz achieves an average basic-block coverage more than 2.6 times that of prior state-of-the-art rehosting approaches. Unlike prior approaches, which remain largely confined to advertising and scanning logic, Bluezz reliably exercises connected BLE states and uncovers five previously unknown vulnerabilities that manifest only after connection establishment. Finally, we show that RPM generalizes beyond BLE to other embedded firmware running on different MCUs.

Comment
An earlier version of this work was submitted to IEEE S&P 2025 and ACM CCS 2026

Closest papers

Nearest neighbours by meaning across the whole index.

Compiling Imperative Hardware Protocol Specifications to Hardware

cs.PL ·2026-11-14 ·Nikil V. Shyamsunder, Ernest Ng, Adrian Sampson, Kevin Laeufer
similarity 0.65
Abstract · 28 pages, 16 figures

Correct modular composition in hardware depends on interfaces with subtle multi-cycle timing behavior, yet such protocols remain difficult to specify, test, and debug. Recent work has demonstrated that hardware communication specifications can take the form of compact imperative programs that describe the cycle-by-cycle behavior of each logical transaction. However, prior tools only use these specifications for simulation-based testing and debugging, and their semantics remain informal. In this work, we develop a theory of hardware protocol specifications using automata. In addition to making the specifications' meaning precise, the automaton representation lets us compile them into synthesizable hardware. We implement a compiler that produces RTL modules for driving hardware interfaces and for reconstructing logical transactions from low-level I/O signals. We demonstrate a variety of use cases for synthesizable protocol drivers and reconstructors, including runtime monitors that check security properties in the Wishbone protocol and a binding generator that synthesizes interfaces between RTL modules and programs in the Calyx intermediate language.

0.32

EmbedGym: Letting Coding Agents Develop and Debug Embedded Firmware Without Physical Hardware

cs.SE cs.AI ·2026-11-16 ·Minghui Zhao, Yiming Li, Sophie Zhu, Maxwell Khor, Lauren Ouyang +3 more
similarity 0.61
Abstract

Modern coding agents perform well on general software benchmarks because they can run code and unit tests in a closed loop. Embedded firmware development, however, breaks this loop: a program that compiles can still fail on real hardware due to pin polarity, bus protocol, timing, or networking bugs that an agent at a text terminal cannot observe. Existing embedded coding agents either skip hardware execution, drive GPIO-only simulators with multi-second delays, or test on physical boards in a static environment. In this paper, we present EmbedGym, an interactive virtual hardware environment that lets coding agents develop and debug embedded firmware without physical hardware. EmbedGym uses instruction-level microcontroller unit (MCU) emulators to execute the same binary that would be flashed onto a physical board, connects them to 41 peripheral models, an analog circuit simulator, and virtual WiFi/Bluetooth Low Energy (BLE) endpoints, and exposes an interface for agents to change sensor inputs, press buttons, and inspect hardware states. On top of it, we build EmbedGym-Bench, which consists of 598 tasks across 6 MCU-framework pairs graded by hidden timed test vectors, using a five-stage multi-agent workflow that synthesizes peripheral models and tasks from datasheets and driver libraries. We expose EmbedGym to a coding agent at three levels and evaluate eight models over more than 14K trajectories. Even when compilation succeeds 99.7% of the time, 19.9% of compiled firmwares fail at runtime (up to 73% on individual targets). In contrast, interactive hardware testing in EmbedGym increases pass rates across models by +4.9% to +14.7% (up to +31% on individual targets). Our results also show that an agent with EmbedGym outperforms prior embedded agent frameworks, and lightweight models with EmbedGym match frontier models without it at 30-70x lower cost.

0.28

Towards Effective Fuzzing of EDK2 Components

cs.CR ·2026-11-02 ·Datta Manikanta Sri Hari Danduri, Connor Everett Glosner, Aravind Machiry
similarity 0.59
Abstract

Securing bootloaders is critical to establishing the trusted computing base of modern systems. TianoCore's edk2, the de facto UEFI-based bootloader, is widely deployed but has recently been shown to contain numerous high-severity vulnerabilities. Existing approaches either focus on post-boot interfaces or rely on heavyweight simulation, limiting their scalability, throughput, and coverage of boot-time components. We present Metis, an automated technique for fuzzing edk2 protocols (i.e., boot-time interfaces) by rehosting them as user-space applications. Our key insight is that effective fuzzing must exercise not only protocol interfaces but also their dependency interactions, which serve as additional input channels. Metis employs a Direct-dependency Component Rehosting (DCR)-based strategy to construct semantically meaningful mocks for dependencies, enabling controlled input injection across all channels. It further leverages a hybrid approach combining static analysis and Large Language Model (LLM)-guided synthesis to generate and refine fuzzing harnesses. We implement Metis on the Host Based Firmware Analyzer (HBFA) framework and evaluate it on 60 drivers covering 162 protocols. Metis achieves 73.1% coverage, approximately 1.7 times higher than FuzzUEr, the state-of-the-art edk2 fuzzing technique, and discovers 137 previously unknown bugs. We have already reported 26 of them, including 12 that are remotely triggerable, and all reported vulnerabilities have been acknowledged by the vendors.

0.15

BOOMerang: Autonomous Translation from RTL to Microarchitectural Simulators and Back

cs.AR ·2026-11-19 ·Ferran Hermida-Rivera, Jack Toubes, Angela Cui, Chengyi Lux Zhang, Sagar Karandikar
similarity 0.58
Abstract

High-level simulators like gem5 are often used to test and demonstrate novel architectural techniques. While these simulators provide high research productivity, they generally lack the means to provide detailed feedback on the realizability of a hardware design. Furthermore, these simulators can frequently fall out-of-sync with the detailed performance characteristics of real hardware designs, which is usually the responsibility of dedicated engineers/teams in industry. While RTL implementation can address these challenges, it can be even more difficult to translate simulator code to high-quality RTL by hand without a large team. In this work, we architect and evaluate agentic loops that automate both parts of the RTL vs. high-level simulator workflow that is critical to high-quality architecture research. Our loops (1) automatically generate accurate high-level models of RTL implementations of CPU designs (BOOM) in a battle-tested microarchitecture simulation framework (gem5) and (2) automatically translate new microarchitectural features implemented in the high-level simulator back to RTL faithfully. Targeting the first loop at autonomously building a gem5 model for the Berkeley Out-of-Order Machine (BOOM) core, we generate a simulator with IPC within 3% of the RTL, meeting targets pursued for simulators in industry, in only 2 days. We use our second loop to automatically translate 72 features from this aligned gem5 simulator into RTL in the BOOM core, while maintaining its low IPC error. Combining translated optimizations together yields a 25% performance improvement for the BOOM core RTL implementation in SPECint 2017, demonstrating that having these loops for moving between high-level simulation and RTL enables actual improvement of processor performance. The agentic loops we developed and the simulators and RTL we generated will be available in open-source.

0.26

Wake 5: A Python Framework for Solidity Testing, Fuzzing, and Static Analysis

cs.SE ·2026-11-06 ·Josef Gattermayer, Michal Převrátil
benchmarkcode/data similarity 0.58
Abstract

Smart-contract fuzzers differ by an order of magnitude in throughput and by design in how they construct inputs, yet published comparisons rarely separate the two. We present Wake 5, an open-source Python framework for Solidity testing, fuzzing and static analysis, and use it to locate the binding constraint of stateful smart-contract fuzzing. Wake 5 replaces the JSON-RPC connection to an external node with an in-process EVM (revm) and exposes its static analysis to language-model agents through a Model Context Protocol (MCP) server. On the Daedaluzz maze benchmark (153 reachable assertions, guard constants below 2^32), Wake 5 executes 29,931 transactions per second, on par with Foundry (30,186) and 11.5x faster than Echidna (2,600). In eight-hour campaigns, however, the three tools plateau at medians of 75, 71 and 70 assertions, and their union reaches 93. We show that Wake's integer generator places 51% of its probability mass below 2^32 and that, once shallow assertions are exhausted, the generator prior rather than throughput bounds every tool. A harness written by a language-model agent, which derives inputs with a constraint solver, reached all 153 assertions in each of five campaigns executed by Wake, in 33 to 79 minutes. A complementary ablation in an agentic audit of a production Go codebase found that static-analysis tools improved recall for none of three models, raised precision for all three, and increased language-model cost by up to 12.7%. We discuss correlated oracles and non-deterministic completion, and argue that the fuzzer's role is shifting from search to execution.

0.36

WasmLens: Automatic Glass-Box Instrumentation for Composed WebAssembly Applications

cs.SE ·2026-11-09 ·Michiel Van Kenhove, Ewout Verlinde, José Santos, Filip De Turck, Bruno Volckaert +1 more
published similarity 0.58
Abstract · Accepted article in WebAssembly, Cloud and Edge: Shaping the Future of Computing (WACE '26)

The WebAssembly Component Model enables language-independent composition of independently developed components, but complicates observability. Existing tracing support flattens execution hierarchy by attributing every span created inside a composition to a single host-level parent context, so execution across component boundaries cannot be reconstructed. The problem is amplified because components are typically deployed as black boxes whose internals cannot be modified or inspected by the system integrator. To address these limitations, we propose a revised wasi:otel/tracing design in which the runtime maintains a per-component span stack, restoring parent-child relationships across component boundaries without changing component interfaces or source code. This change has since been adopted upstream. Building on this design, we present WasmLens, an automatic instrumentation tool that derives instrumentation points from a composition graph and injects tracing middleware into already composed binaries, yielding end-to-end traces for black-box compositions with no developer configuration. This automatic instrumentation raises mean request latency from $238$ $μ$s to $454$ $μ$s across six component boundaries. Raising the expected number of boundary crossings from 6 to 11 further increases latency to $514$ $μ$s, an incremental cost of $12$ $μ$s per crossing, of which $10.4$ $μ$s is attributable to instrumentation. These results show that instrumentation overhead is additive in composition depth rather than proportional to baseline execution time.

0.38

Spec-Driven Hardware Evolution via Executable Contract Refinement and Proof-Guided RTL Update

cs.AR ·2026-08-13 ·Shibo Zhao, Yang Zhang, Mengxia Tao, Baoqi Zhang, Kezhi Li +4 more
code/data similarity 0.58
Abstract

Hardware development is inherently evolutionary: major revisions typically begin by changing intended behavior and then updating a previously validated implementation, rather than regenerating RTL from scratch. Yet most recent LLM-based hardware research still frames the task primarily as prompt-to-RTL generation, offering limited support for semantic version evolution of trusted legacy designs. We present spec-driven hardware evolution, a contract-centered formulation for RTL version iteration. Instead of treating a new feature request as a direct prompt for RTL generation, we refine it into a reviewed executable contract for the next version. This contract specifies what must hold at the externally visible transactional level through a behavior-level reference together with explicit observation and checking semantics, while leaving how the change is realized in RTL to the evolution process. Based on this formulation, we organize hardware evolution into four stages: Specify, Plan, Implement, and Validate. After contract approval, the remaining stages proceed automatically: Plan derives cross-version semantic deltas and localizes affected RTL regions, aided by mutation-based semantic probing; Implement and Validate then perform legacy-aware RTL update under proof-guided checking and iterative repair. We evaluate the framework on a controlled version-evolution case study of a representative TPU datapath block under data-format changes. The results support the feasibility of contract-driven hardware evolution and demonstrate that the proposed backend workflow can effectively drive validated legacy RTL toward next-version functional convergence under a reviewed executable contract. An anonymous artifact for reproducibility is available at https://anonymous.4open.science/r/SDHE-3A6C.

0.20

NosRacer: Dynamic Detection of Race Conditions in On-Device Network Operating Systems

cs.DC cs.SE ·2026-10-08 ·Runze Wu, Jingbo Zhai, Shanming Ping, Lingzhi Ouyang, Hua Duan +6 more
published similarity 0.58
Abstract · 18 pages, 5 figures, 6 tables. Accepted to SIGOPS ATC 2026

Commercial on-device network operating systems (NOSes) run the complex control planes of production routers and switches, where configuration update tasks are executed by multiple loosely coupled components through asynchronous message passing. Such executions are prone to race conditions: the same ordered input commands may produce different outcomes when messages are delivered in different orders. The race conditions are difficult to expose because they often manifest only as subtle, delayed malfunctions. Existing static analysis techniques lack scalability and precision for large-scale industrial NOSes, while dynamic ones incur substantial system-execution cost when attempting to cover the space of asynchronous message interleavings. To address the challenges above, we present NosRacer, a dynamic analysis framework for race condition detection in industrial-grade on-device NOSes. NosRacer uses a two-phase design. The concentration phase reduces analysis scope by leveraging the locality of configuration update tasks. Race condition detection is then limited to a small subset of involved components and crucial state variables, thereby reducing the detection cost. The perturbation phase proactively perturbs message asynchrony to increase the likelihood of executions with race-condition-exposing message interleavings. It keeps perturbation practical by grouping compatible perturbations for parallel execution and adaptively strengthening perturbations. We implement NosRacer in a commercial, actively developed NOS. NosRacer is integrated into the existing testing factory and used to detect race conditions in 5 key control-plane components. NosRacer achieves 66% precision and detects 21 race conditions confirmed by developers as severe bugs, while keeping the detection overhead below 10%.

0.34