CS Paper Radar

EmbedGym: Letting Coding Agents Develop and Debug Embedded Firmware Without Physical Hardware

Minghui Zhao, Yiming Li, Sophie Zhu, Maxwell Khor, Lauren Ouyang, Hai "Helen" Li, Yiran Chen, Tingjun Chen

cs.SE cs.AI ·submitted 2026-11-16 20:02 UTC · v1

Abstract

Modern coding agents perform well on general software benchmarks because they can run code and unit tests in a closed loop. Embedded firmware development, however, breaks this loop: a program that compiles can still fail on real hardware due to pin polarity, bus protocol, timing, or networking bugs that an agent at a text terminal cannot observe. Existing embedded coding agents either skip hardware execution, drive GPIO-only simulators with multi-second delays, or test on physical boards in a static environment. In this paper, we present EmbedGym, an interactive virtual hardware environment that lets coding agents develop and debug embedded firmware without physical hardware. EmbedGym uses instruction-level microcontroller unit (MCU) emulators to execute the same binary that would be flashed onto a physical board, connects them to 41 peripheral models, an analog circuit simulator, and virtual WiFi/Bluetooth Low Energy (BLE) endpoints, and exposes an interface for agents to change sensor inputs, press buttons, and inspect hardware states. On top of it, we build EmbedGym-Bench, which consists of 598 tasks across 6 MCU-framework pairs graded by hidden timed test vectors, using a five-stage multi-agent workflow that synthesizes peripheral models and tasks from datasheets and driver libraries. We expose EmbedGym to a coding agent at three levels and evaluate eight models over more than 14K trajectories. Even when compilation succeeds 99.7% of the time, 19.9% of compiled firmwares fail at runtime (up to 73% on individual targets). In contrast, interactive hardware testing in EmbedGym increases pass rates across models by +4.9% to +14.7% (up to +31% on individual targets). Our results also show that an agent with EmbedGym outperforms prior embedded agent frameworks, and lightweight models with EmbedGym match frontier models without it at 30-70x lower cost.

Closest papers

Nearest neighbours by meaning across the whole index.

Closed-loop evaluation of LLM agents for embedded software development

cs.SE cs.AIcs.ARcs.LG ·2026-10-08 ·Jorge García-Carrasco, Sergio García-Carrasco, Alejandro Maté, Juan Trujillo
publishedbenchmarkcode/datahighly cited similarity 0.72
Abstract · Published in Journal of Systems Architecture 179 (2026) 103937. 23 pages, 4 figures, 5 tables. Code and artifacts: https://github.com/jgcarr…

Large language models (LLMs) are increasingly deployed as coding agents that edit files, run builds and tests, inspect execution results, and repair software iteratively. Embedded firmware is a demanding target because correctness depends on closed-loop behavior under sensing, timing, and safety constraints, not only on static source quality. Yet embedded-agent evaluation remains limited and often emphasizes one-shot synthesis or offline correctness. We present a benchmark for closed-loop evaluation of embedded coding agents. Each task provides a plain-text engineering description, constrained workspace, and visible build-and-runtime surface. The agent must translate requirements into implementation and self-verification steps, then iterate until the required device behavior is achieved. The suite contains five embedded-control tasks and four feedback scenarios: one-shot generation, realistic self-verification, CI-style red/green feedback, and oracle-style detailed feedback. The implementation targets simulated ESP32 firmware for reproducibility. We evaluate seven GPT-family and Qwen-family configurations across five tasks and four scenarios, with three repetitions per condition for 420 runs. gpt-5.4 has the highest pass rate among evaluated configurations but does not saturate the benchmark; qwen3.5-27B is the strongest observed local model; and smaller local models degrade sharply in pass rate and search efficiency. These results suggest that capable local embedded coding agents are emerging.

0.69

EngineAgent: Agentizing On-Device LLM Inference Engines with Inference Stack Hierarchy Awareness and Hardware Abilities

cs.OS cs.AIcs.CLcs.SE ·2026-11-10 ·Zhengxiang Huang, Yujie Sun, Shengheng Chen, Zhaode Wang, Chaoyue Niu +4 more
similarity 0.66
Abstract

Rapidly evolving LLM architectures and heterogeneous mobile hardware make supporting new models in on-device inference engines a recurring and costly system challenge. Each model may require coordinated changes across conversion, graph construction, operators, and hardware backends. Existing coding agents often miss these cross-layer dependencies and struggle to diagnose failures across host--device execution paths. We present EngineAgent, an agentic system for automating on-device LLM model enablement. Its key insight is to separate reusable engine and hardware knowledge from model-specific implementation. Before enablement, EngineAgent constructs a hierarchy-aware engine index that captures engine abstraction layers and cross-layer dependencies, and pre-validates backend-specific build, execution, and debugging workflows using already supported models. For each new model, a builder uses this knowledge to coordinate cross-layer changes, while an auditor checks implementation completeness and drives iterative debugging through device-side validation. Across 12 tasks spanning three mobile LLMs and four engine--backend pairs on CPUs, GPUs, and NPUs, EngineAgent achieves 75% end-to-end success with either of two underlying LLMs, versus 33.3% for the strongest coding-agent baseline. Success requires compilation, on-device execution, and output-logit agreement with reference implementations. EngineAgent also reduces average per-task time and model-API cost relative to baselines using the same underlying LLMs.

0.21

LLM-based Hardware Development with Hierarchical IRs and End-to-End Multi-Agent Workflow

cs.AR cs.MAcs.SE ·2026-08-31 ·Chenyang Yin, Agasthi Haputhanthri, Aditya Anirudh Jonnalagadda, Zhenyu Bai, Yuanming Song +5 more
benchmark similarity 0.65
Abstract · 10 pages, 5 figures

Large language models (LLMs) are increasingly used in software development, but their use in complex hardware design remains limited. This gap stems from both the scarcity of public hardware training data and the fundamentally different methodologies used in hardware design. In particular, applying LLMs to hardware requires more than direct RTL generation: the model must understand module boundaries, inter-module connections, and verification requirements. In this paper, we present an LLM-based hardware development framework with hierarchical intermediate representations (IRs) and an end-to-end multi-agent workflow. The core idea is to provide an abstraction of hardware design to LLMs through two structured IRs: Architectural Sketch, which captures module topology and interconnection, and Operational Specification, which defines per-module functionality and interfaces. Our framework uses these IRs to decompose a complex design into sub-modules, specify the per-block functionality, and derive how each module should be tested and verified. We incorporate a multi-agent debug loop in the framework, allowing agents to get the error feedback and control the debug details such as the signals to be probed for simulation. We evaluate our framework on Verilog-Eval benchmark, achieving a pass@5 rate of 95.5%, which surpasses current state-of-the-art LLM generation frameworks. To better assess performance on complex, realistic designs, we introduce a new case study spanning applications from general-purpose processors to digital signal processing systems. Experimental results indicate that such complex designs exceed the capabilities of existing approaches, whereas our framework is the only one capable of producing functional end-to-end design. Our generated RTL follows all industry-standard design rules, is lint-clean, functionally correct and fully synthesizable.

0.17

BOOMerang: Autonomous Translation from RTL to Microarchitectural Simulators and Back

cs.AR ·2026-11-19 ·Ferran Hermida-Rivera, Jack Toubes, Angela Cui, Chengyi Lux Zhang, Sagar Karandikar
similarity 0.64
Abstract

High-level simulators like gem5 are often used to test and demonstrate novel architectural techniques. While these simulators provide high research productivity, they generally lack the means to provide detailed feedback on the realizability of a hardware design. Furthermore, these simulators can frequently fall out-of-sync with the detailed performance characteristics of real hardware designs, which is usually the responsibility of dedicated engineers/teams in industry. While RTL implementation can address these challenges, it can be even more difficult to translate simulator code to high-quality RTL by hand without a large team. In this work, we architect and evaluate agentic loops that automate both parts of the RTL vs. high-level simulator workflow that is critical to high-quality architecture research. Our loops (1) automatically generate accurate high-level models of RTL implementations of CPU designs (BOOM) in a battle-tested microarchitecture simulation framework (gem5) and (2) automatically translate new microarchitectural features implemented in the high-level simulator back to RTL faithfully. Targeting the first loop at autonomously building a gem5 model for the Berkeley Out-of-Order Machine (BOOM) core, we generate a simulator with IPC within 3% of the RTL, meeting targets pursued for simulators in industry, in only 2 days. We use our second loop to automatically translate 72 features from this aligned gem5 simulator into RTL in the BOOM core, while maintaining its low IPC error. Combining translated optimizations together yields a 25% performance improvement for the BOOM core RTL implementation in SPECint 2017, demonstrating that having these loops for moving between high-level simulation and RTL enables actual improvement of processor performance. The agentic loops we developed and the simulators and RTL we generated will be available in open-source.

0.26

SyclKittens: A Tile Programming Model for Programmers and Coding Agents on Intel GPUs

cs.DC ·2026-10-03 ·Yehong Jiang, Sheng Chen, Fangwen Fu, Yen-Kuang Chen, Xinmin Tian +2 more
code/data similarity 0.64
Abstract · 46 pages, 11 figures. Code at https://github.com/intel/SyclKittens

New AI accelerators arrive before the kernels that make them fast, because peak kernel performance requires architecture-specific expertise in operand pipelines and data-movement techniques. Coding agents can now write, compile, and tune kernels on their own, so they could greatly accelerate kernel development and optimization. What agents produce depends on the interfaces they are given. These interfaces may expose a machine's raw capabilities or encode the known-good methods for exploiting its hardware features efficiently. We test the performance impact of these two interfaces on Intel GPUs through controlled experiments with three coding models on three kernels. With raw SYCL and execution feedback, Opus 4.8, the strongest of the three models tested, writes a single-GPU GEMM kernel reaching only 57.5% of Intel's tuned oneDNN library. We present SyclKittens, a hardware-aware tile programming model for Intel GPUs that encodes these known-good methods, so its operations place operands in matrix-engine layouts, prefetch through the L1 cache, and communicate over the fabric that links GPU stacks into a node. With SyclKittens under the same agent, task, and feedback budget, the agent reaches 82.1%, showing that encoded methods turn hardware capabilities into performance. Workload-specific policies stay programmable, and engineers and agents jointly refine these schedules in SyclKittens to build a kernel suite that reaches ~96% of oneDNN in geometric mean across GEMM shapes. The suite runs Llama-3.1-8B inference 1.59x faster than torch$.$compile on one GPU and up to 2.91x faster than a matched multi-GPU decode path on Intel's oneCCL. SyclKittens is open source and available at https://github.com/intel/SyclKittens.

0.34

Pdb or Not to Be: Comparing Debugging Interfaces With Pass$_{X}$@$k$

cs.AI cs.SE ·2026-11-05 ·Ryan Magnuson, Ellie Kitanidis, Ariel Lee
publishedbenchmark similarity 0.63
Abstract · Accepted, NeurIPS 2026 workshop "Who Verifies the Agents? Toward Reliable Agent Development"

Interactive debuggers are indispensable to human software development, yet coding agents overwhelmingly rely on edit-execute-observe loops, using common bash tools, test scripts, and print statements to debug via repeated shell commands. Stepping through a debugger provides live access to runtime state, which may enable different problem-solving capabilities. However, prior work typically introduces the debugger as an additional tool or through a new subagent, making its individual contribution difficult to isolate from the associated scaffold changes. To address this, we compare a debugger-only agent against a bash-only agent on all 500 SWE-bench Verified instances, holding the rest of the scaffold fixed. We evaluate both architectures on two models, GPT-OSS-120B and Nemotron-3-Ultra-550B, with three independent runs per architecture $\times$ model configuration. Crucially, to distinguish interface specialization from expanded coverage under repeated sampling, we introduce pass$_X$@$k$, a cross-agent pass@$k$ that provides an unbiased estimator of the probability that at least one of $k$ agents is successful. Although the bash and debugger agents solve partially disjoint subsets of the benchmark in any single pair of runs, our pass$_X$@$2$ estimator reveals that this is largely due to run-to-run variance rather than tool complementarity. Across both models, we find that two bash rollouts outperform the combination of one bash and one debugger rollout. Our findings highlight the importance of accounting for stochastic variance in evaluating agent and tool diversity, and we hope that pass$_X$@$k$ will serve as a useful framework for the community.

0.20

SoK: A Large-Scale Empirical Study of Emulation-Based Dynamic Analysis Research for ARM Cortex-M Firmware (Extended Version)

cs.CR ·2026-09-30 ·Hongyuan Li, Ke Wang, Wei Zhou, Le Guan
publishedsurvey similarity 0.63
Abstract · Extended Version of NDSS 2027 Accept Paper

Microcontroller (MCU)-based devices are increasingly pervasive, making efficient, scalable firmware security analysis critical. Recent firmware re-hosting work enables automated vulnerability assessment, yet two gaps remain. First, existing tools are evaluated on limited, heavily overlapping datasets, undermining the generalizability of reported results. Second, prior research advances the state of the art along isolated dimensions, such as emulation, fuzzing, or bug diagnosis, without a holistic understanding of how these components interact and complement one another in dynamic analysis workflows. Building on recently released large-scale MCU firmware datasets from OTACAP and FirmLine, we present an empirical study of 24 emulation-based firmware analysis tools published in top conferences and journals. We position these tools within a unified automated analysis pipeline: emulation configuration reconnaissance, emulation, bug finding, and diagnosis. At each stage, we evaluate whether a tool's output provides sufficient information to enable the subsequent stage, using a deduplicated and validated subset of 4,571 ARM-based firmware samples. Only 1,580 samples (34.5%) can be successfully fuzzed, even counting a sample successful if at least one existing tool can fuzz it. Among these, fuzzing results are generally poor, with average code coverage of only 10% and many false crashes/hangs. Through a systematic analysis of failed fuzzing attempts and false-positive cases, we expose fundamental challenges and methodological limitations in current approaches. These findings highlight critical gaps in the state of the art and provide actionable insights to guide future research in emulation-based firmware analysis.

0.22

Metal Sandbox: Isolated Execution and Command Scheduling for GPU Coding Agents on Apple Silicon

cs.LG cs.AIcs.CLcs.DC ·2026-11-12 ·Haozhe Wang, Lina Chen, Fanqi Wan, Qi Han, Yinmin Zhang +3 more
code/data similarity 0.62
Abstract · 16 pages, 7 figures, 5 tables. Code available at https://github.com/WangHaoZhe/metal-sandbox and https://github.com/WangHaoZhe/harbor

On-device inference requires kernels that make effective use of local accelerators. Efficient training and evaluation of models that generate Apple Metal kernels benefit from native macOS tools and concurrent agent sessions. These sessions alternate between model requests, development commands, and GPU execution, leaving GPU capacity idle for much of a rollout. We present Metal Sandbox, infrastructure that combines restricted per-instance file access, native command execution, and command-level scheduling across interconnected Macs. Each agent retains its workspace and private development environment. Parallel commands can run concurrently, while serial commands share one execution slot per node; eligible waiting commands can migrate to available Macs and return results to the original agent. Integration with Harbor supports task execution, automatic verification, and rollout collection through a common workflow. Controlled experiments on four Mac mini M4 nodes achieve $1.68\times$--$2.05\times$ gains in command throughput under concentrated demand. Sixteen static agent traces give an estimated $2.14\times$ sustained-throughput gain for four sessions per node versus one, assuming continuously replenished sessions and unchanged mean durations. Replaying these measured traces under dynamic scheduling reduces mean tool waiting by 18.8% and batch elapsed time by 22.3%, assuming unchanged phase durations. Metal Sandbox and its Harbor integration are open-source on GitHub.

0.32