CS Paper Radar

Occlusion-induced risk and interventions in pedestrian-autonomous truck interactions on multi-lane roads: A virtual reality study

Yun Ye, Yuan Che, S. C. Wong, Stergios-Aristoteles Mitoulis, Haoyang Liang

cs.HC ·submitted 2026-08-30 22:15 UTC · v1

Abstract

Autonomous trucks (ATs) may introduce distinct pedestrian-safety risks because of their large physical dimensions, constrained braking capability, limited driver-based communication cues, and potential to occlude surrounding traffic. This study employed a controlled virtual reality experiment with 54 participants to investigate pedestrian-AT interaction risk in an unsignalized multi-lane crossing scenario and to evaluate occlusion-targeted risk mitigation strategies. The experiment examined the effects of near-side vehicle type, weather condition, and far-side vehicle yielding strategy on pedestrian behavior, perceived risk, and objective safety. Based on a representative high-risk scenario, three targeted interventions were designed and tested: an environment-aware external human-machine interface (eHMI), a projected eHMI, and an auditory warning. The results showed that ATs increased perceived risk and encouraged more cautious crossing behavior, suggesting a risk-compensation effect. However, this compensation was weakened under rainy conditions, where braking-related safety margins were reduced. AT-induced occlusion further increased far-side interaction risk by limiting pedestrians' recognition of hidden vehicles. Among the three interventions, the projected eHMI showed the best overall performance, improving objective safety margins, enhancing risk awareness, and supporting behavioral adjustment. These findings highlight the need for AT-specific interface and warning strategies that address both intention communication and risk localization.

Closest papers

Nearest neighbours by meaning across the whole index.

Automated-Truck Penetration Shapes Human Drivers' Car-Following Margins Near Motorway Ramps: A Driving-Simulator Study

cs.ET ·2026-11-17 ·Minhao Chen, Zehao Jiang, Julius Secadiningrat, Elnaz Irannezhad
similarity 0.60
Abstract · 31 pages, 7 figures, 5 tables

Automated-vehicle dedicated lanes (AVDLs) are proposed as transitional infrastructure for mixed traffic, but their effect near ramps, and that of automated trucks, on the human drivers sharing the road has rarely been observed. In a mixed-design driving-simulator experiment, 63 drivers were assigned to one of four layouts (an AVDL extending beyond, coinciding with, or ending inside a 1.5-km ramp weaving section, or no AVDL) and drove at four automated-truck penetration levels from 20% to 80%. Linear mixed-effects models with participant random effects and multiplicity control were used. Higher penetration reduced the share of car-following time at gaps below 1.5 s from 28.5% to 18.1% (Holm-adjusted p = .006). This was explained by leader composition: drivers spent 8% of following time behind a truck at 20% penetration and 48% at 80%, kept longer gaps behind trucks, and did not change their gaps within leader type. AVDL layout had no detectable effect on safety margins, rear-end conflict rates, travel time or speed (differences bounded within plus or minus 5 s per section) and no significant effect on workload. Between-driver differences accounted for 52% to 77% of the variance in the main outcomes. Mixed-traffic models should therefore represent human car-following as leader-type-dependent and heterogeneous.

0.21

A Human-Like Pedestrian Model for Automated Driving Simulations

cs.HC ·2026-09-24 ·Ruofeng Wang, Patrick Ebel, Philipp Wintersberger, Antti Oulasvirta
similarity 0.60
Abstract · 14 pages, 7 figures, 1 table. Submitted to IEEE Transactions on Intelligent Transportation Systems

Automated vehicles must be able to interact with pedestrians safely and efficiently across diverse traffic situations. Although driving simulators offer a scalable testbed for learning such capabilities, existing theory-inspired pedestrian models are narrow in scope and limited to go/no-go crossing decisions in single-lane settings. While data-driven approaches can predict pedestrian behavior in complex situations, they lack sufficient observations in rare, safety-critical scenarios. Here, we propose an approach to training pedestrian models in simulators so that learned policies generate demonstrably human-like behavior in realistic, complex traffic scenarios, including multiple lanes, heavy traffic, and dangerous driving styles. Our technical contribution is a novel definition of pedestrian-vehicle interaction as a partially observable Markov decision process (POMDP) with theory-grounded perceptual, cognitive, and motor constraints. It accounts for the highly adaptive nature of human behavior in traffic and simulates how people adjust their responses according to perceived danger, time pressure, and the complexity of the situation. When trained via deep reinforcement learning (RL) with domain randomization in a simulator, the model reproduces the broadest range of empirical findings shown so far on human crossing behavior, including gap acceptance, yielding acceptance, hesitation, and evasive speed adjustment. We show that learned policies transfer to unseen traffic environments, and can be further adapted to local traffic norms with finetuning. Together, these results establish a blueprint for simulator-ready pedestrian models that can support the development and evaluation of automated driving systems.

0.21

InterSim: Innovative Intersection Digital Twins for Human-in-the-Loop Driving Simulation

cs.CE cs.CYcs.ET ·2026-11-04 ·Luyang Jiang, Chuheng Wei, Yaguang Li, Shaoqi Wang, Yupeng Zhou +4 more
code/data similarity 0.60
Abstract

Innovative intersection designs can improve roadway safety and operational efficiency, but their uncommon geometries may create challenges for driver comprehension during early deployment. Evaluating these designs through full-scale field implementation can also be costly. This paper presents InterSim, a Unity game engine-based human-in-the-loop (HITL) driving simulator that constructs digital twins of site-specific innovative intersections in a virtual environment. InterSim links the real world and the simulation world through two closed cycles: a digital twin cycle that builds each intersection twin from agency design and traffic data and returns evidence from simulation to the agency, and an HITL cycle in which human drivers or automated driving algorithms operate the ego vehicle under identical scenario conditions. The research capabilities of InterSim are demonstrated through two case studies: a surrogate safety study compares post-encroachment time distributions between a Reduced Conflict Intersection and a standard intersection under different traffic volumes; an eco-driving study compares human drivers with a rule-based agent using vehicle-to-infrastructure information and reveals differences in emission and driving behavior. These studies demonstrate that InterSim provides a reusable digital twin platform for investigating innovative intersection designs from diverse perspectives. Demo video and open-source code can be accessed at https://purduedigitaltwin.github.io/InterSim/

0.27

Behavioral Safety Assessment towards Large-scale Deployment of Autonomous Vehicles, Part I: Methodology

cs.RO ·2026-10-06 ·Henry X. Liu, Tinghan Wang, Xintao Yan, Haowei Sun, Zhijie Qiao +4 more
code/datahighly cited similarity 0.60
Abstract

Autonomous vehicles (AVs) have significantly advanced in real-world deployment in recent years, yet safety continues to be a critical barrier to widespread adoption. Traditional functional safety approaches, which primarily verify the reliability, robustness, and adequacy of AV hardware and software systems from a vehicle-centric perspective, do not sufficiently address the AV's broader interactions and behavioral impact on the surrounding traffic environment. To overcome this limitation, we propose a paradigm shift toward behavioral safety, a comprehensive approach focused on evaluating AV responses and interactions within the traffic environment. To systematically assess behavioral safety, we introduce a third-party AV safety assessment framework comprising two complementary evaluation components: the Behavioral Competency Test and the Driving Intelligence Test. The Behavioral Competency Test evaluates the AV's reactive behaviors under controlled scenarios, ensuring basic behavioral competency. In contrast, the Driving Intelligence Test assesses the AV's interactive behaviors within naturalistic traffic conditions, quantifying the frequency of safety-critical events to deliver statistically meaningful safety metrics before large-scale deployment. In Part II of this study, an open-source Level 4 Automated Driving System (ADS) is tested to demonstrate the effectiveness of the proposed method.

0.46

Engineering Psychological Safety in Autonomous Vehicles: A Systems-Theoretic Framework for Psychological Safety in Autonomous Vehicles and its Validation in Real-World Scenarios

cs.HC cs.RO ·2026-08-19 ·Yandika Sirgabsou, Benjamin Hardin, François Leblanc, Efi Raili, David Jackson +3 more
similarity 0.60
Abstract

Despite rapid technological advances, the societal acceptability of autonomous vehicles (AVs) remains limited by psychological barriers that extend beyond traditional concerns of physical safety. While factors such as trust and perceived safety are known to influence user acceptance, there is a lack of formalized mechanisms and engineering methods to systematically identify, assess, and mitigate psychological risks arising from human-AV interactions. To address this gap, this work proposes and validates a systems-theoretic framework for the assessment of psychological safety in autonomous vehicles. First, a comprehensive psychological safety risk model is defined, extending the Systems-Theoretic Accident Model and Processes (STAMP) to incorporate key psychological constructs such as trust, perceived control, predictability, and perceived support. Based on this model, a hazard analysis method (AV-PsySafe) is developed to systematically identify psychological hazards, unsafe control actions, and loss scenarios, while introducing a Psychological Safety Integrity Level (PsySIL) to support risk prioritization. Second, the applicability and relevance of the framework are evaluated through its deployment in realistic autonomous vehicle scenarios. A structured validation approach is implemented, including a methodological guide, standardized analysis templates, and the collection of analyst feedback. The results demonstrate that the framework can be consistently applied by practitioners, producing meaningful insights into psychological risks. Overall, this work establishes both the theoretical foundations and practical feasibility of a unified approach to co-assessing psychological and physical safety in autonomous systems, contributing to more human-centred and trustworthy AV development.

0.34

Complete Street Design informed by Multi-Agent Simulation

cs.MA ·2026-10-20 ·Sharika J. Hegde, Amirmohammad Khakpour, Pedram Beigi, Yu, Nie +1 more
similarity 0.60
Abstract · Under review for publication in Transportation Research Record (TRR)

Objectives: Complete Street design is currently guided largely by qualitative principles despite the increasing complexity of multimodal urban traffic. This paper develops a microscopic simulation framework for quantitatively evaluating alternative street designs by explicitly representing heterogeneous road users, including Autonomous Vehicles (AVs), Connected Vehicles (CVs), Human-Driven Vehicles (HDVs), pick-up and drop-off (PUDO) services, and micromobility users. The framework jointly evaluates mobility and safety within a unified testbed. Methods:The framework enriches microscopic simulation with behavioral models for heterogeneous road users. It explicitly captures lateral movements, parking maneuvers, pedestrian crossings and jaywalking, and shared-lane bicycle and scooter interactions. Safety is quantified using a conflict severity measure grounded in collision physics, while candidate street layouts are optimized using a genetic algorithm. Findings: Applied to a segment of Belmont Avenue in Chicago, Illinois, the framework shows that dedicated bicycle lanes reduce conflict severity at the expense of vehicular throughput. Increasing AV penetration mitigates congestion by reducing traffic shockwaves while improving interactions with pedestrians relative to CVs and HDVs. The optimization framework efficiently identifies Pareto-efficient street layouts that balance mobility and safety. Novelty: The proposed framework integrates heterogeneous behavioral modeling, physics-based conflict assessment, stochastic performance evaluation, and design optimization within a single quantitative framework for Complete Street design. Practical Applications: The framework provides transportation planners with a predictive virtual testbed for evaluating street designs and quantifying the tradeoff between mobility and safety before implementation.

0.39

Exploring Mixed-Reality for Enhancing Driver Warning Systems: A Preliminary Study on Attention-Shifting Methods and Hazard Perception

cs.HC ·2026-11-08 ·Shih-Yu Ma, Nolan Robert Brady, Xu Han, Neng-Hao Yu, Tom Yeh
published similarity 0.59
Abstract · 8 pages, 3 figures

Modern vehicles are equipped with advanced sensors and capabilities, yet engaging human drivers effectively in hazard perception remains a challenging research area. This paper investigates the potential of mixed reality (MR) to enhance driver warning systems. The study examines the impact of attention-shifting methods, including visual cues, audio cues, and a combination of both, on drivers' hazard perception. A preliminary study involving six participants was conducted, and the NASA-TLX analysis did not yield significant differences. However, through the use of functional near-infrared spectroscopy (fNIRS), we unveil distinct brain activation patterns associated with visual and sound cues. Further research with larger sample sizes and diverse driving scenarios is required to validate and expand upon these preliminary results.

0.64

CoSafe: Cooperative Runtime Safety Assurance for Mixed-Traffic Autonomous Driving

cs.SE cs.AIcs.RO ·2026-11-04 ·Dingji Wang, You Lu, Haowen Jiang, Yanggang Chen, Yuyang Bi +3 more
top venuebenchmark similarity 0.59
Abstract · Accepted by the 49th IEEE/ACM International Conference on Software Engineering (ICSE 2027). 13 pages

With the rapid development of autonomous driving systems (ADSes), real-world roads are evolving into mixed-traffic environments where autonomous vehicles (AVs) and other traffic participants (e.g., human-driven vehicles (HDVs), cyclists, and pedestrians) coexist and interact with each other. However, current ADSes still incur various safety violations in mixed traffic scenarios, raising a strong demand for runtime safety assurance frameworks that can continuously monitor hazards and prevent potential violations. Existing ego-centric assurance approaches are insufficient for mixed traffic, where violations often arise from locally reasonable yet jointly incompatible decisions among multiple vehicles and cannot be reliably resolved through independent takeover. To bridge this gap, we propose CoSafe, a modular and ADS-agnostic cooperative runtime safety assurance framework for mixed-traffic autonomous driving to extend runtime safety assurance from ego-centric takeover to scene-level cooperative intervention. CoSafe leverages vehicle-to-everything (V2X) communication to enable roadside units (RSUs) to monitor scene-level hazards and jointly mitigate hazards involving multiple vehicles. We integrate CoSafe with seven state-of-the-art ADSes, and our evaluation on the InterDrive benchmark demonstrates that CoSafe improves the driving score of AVs by 70.03% on average, reduces safety violations by 87.80%, and accurately identifies unsafe AVs with an F3 score of 0.930, while satisfying real-time constraints.

0.48