CS Paper Radar

InterSim: Innovative Intersection Digital Twins for Human-in-the-Loop Driving Simulation

Luyang Jiang, Chuheng Wei, Yaguang Li, Shaoqi Wang, Yupeng Zhou, Hyunsoo Yun, Xishun Liao, Brandon Pitts, Ziran Wang

cs.CE cs.CYcs.ET ·submitted 2026-11-04 05:03 UTC · v1
code/data

Abstract

Innovative intersection designs can improve roadway safety and operational efficiency, but their uncommon geometries may create challenges for driver comprehension during early deployment. Evaluating these designs through full-scale field implementation can also be costly. This paper presents InterSim, a Unity game engine-based human-in-the-loop (HITL) driving simulator that constructs digital twins of site-specific innovative intersections in a virtual environment. InterSim links the real world and the simulation world through two closed cycles: a digital twin cycle that builds each intersection twin from agency design and traffic data and returns evidence from simulation to the agency, and an HITL cycle in which human drivers or automated driving algorithms operate the ego vehicle under identical scenario conditions. The research capabilities of InterSim are demonstrated through two case studies: a surrogate safety study compares post-encroachment time distributions between a Reduced Conflict Intersection and a standard intersection under different traffic volumes; an eco-driving study compares human drivers with a rule-based agent using vehicle-to-infrastructure information and reveals differences in emission and driving behavior. These studies demonstrate that InterSim provides a reusable digital twin platform for investigating innovative intersection designs from diverse perspectives. Demo video and open-source code can be accessed at https://purduedigitaltwin.github.io/InterSim/

Closest papers

Nearest neighbours by meaning across the whole index.

How Roadside Units Enhance Intersection Safety? Cooperative Autonomous Driving System Design and A Proof of Concept

eess.SY ·2026-08-10 ·Taoyuan Yu, Kui Wang, Zongdian Li, Tao Yu, Walid Saad +1 more
similarity 0.71
Abstract

Intersections remain one of the most hazardous locations in urban road networks, where heterogeneous traffic participants and limited visibility frequently lead to severe traffic conflicts. In this paper, a vehicle-to-infrastructure-to-vehicle (V2I2V) cooperative system is proposed for improving road safety and traffic efficiency by using digital twins (DTs) deployed on roadside units (RSUs) to eliminate blind spots and centrally coordinate connected and automated vehicles (CAVs) in smart intersections. The proposed system integrates cloud-based global DTs for macroscopic guidance and RSU-based local DTs for real-time operations. Within this architecture, a hierarchical reinforcement learning (HRL) framework combines offline pre-training with online fine-tuning to achieve robust cooperative control. Experimental results show that the proposed system achieves substantial improvements in safety and efficiency in simulation experiments and real-world proof-of-concept (PoC) trials. In simulations, our system ensures high safety, efficiency, and smoothness under realistic communications and traffic constraints. In PoC trials, the RSU-centric control loop achieves a decision-making latency of approximately 42 ms and maintains a safe stopping distance of 8.5 m for pedestrians, while also shortening stop duration and overall traversal time. These results indicate that the proposed system provides robust and scalable performance at smart intersections.

0.04

Complete Street Design informed by Multi-Agent Simulation

cs.MA ·2026-10-20 ·Sharika J. Hegde, Amirmohammad Khakpour, Pedram Beigi, Yu, Nie +1 more
similarity 0.66
Abstract · Under review for publication in Transportation Research Record (TRR)

Objectives: Complete Street design is currently guided largely by qualitative principles despite the increasing complexity of multimodal urban traffic. This paper develops a microscopic simulation framework for quantitatively evaluating alternative street designs by explicitly representing heterogeneous road users, including Autonomous Vehicles (AVs), Connected Vehicles (CVs), Human-Driven Vehicles (HDVs), pick-up and drop-off (PUDO) services, and micromobility users. The framework jointly evaluates mobility and safety within a unified testbed. Methods:The framework enriches microscopic simulation with behavioral models for heterogeneous road users. It explicitly captures lateral movements, parking maneuvers, pedestrian crossings and jaywalking, and shared-lane bicycle and scooter interactions. Safety is quantified using a conflict severity measure grounded in collision physics, while candidate street layouts are optimized using a genetic algorithm. Findings: Applied to a segment of Belmont Avenue in Chicago, Illinois, the framework shows that dedicated bicycle lanes reduce conflict severity at the expense of vehicular throughput. Increasing AV penetration mitigates congestion by reducing traffic shockwaves while improving interactions with pedestrians relative to CVs and HDVs. The optimization framework efficiently identifies Pareto-efficient street layouts that balance mobility and safety. Novelty: The proposed framework integrates heterogeneous behavioral modeling, physics-based conflict assessment, stochastic performance evaluation, and design optimization within a single quantitative framework for Complete Street design. Practical Applications: The framework provides transportation planners with a predictive virtual testbed for evaluating street designs and quantifying the tradeoff between mobility and safety before implementation.

0.39

Empirically Calibrated Differential Games for Simulating Driver Interactions

cs.MA math.OC ·2026-10-23 ·Amirmohammad Khakpour, Nachuan Li, Pedram Beigi, Yu, Nie
published similarity 0.66
Abstract · This manuscript is intended for submission to IEEE Transactions on Intelligent Transportation Systems (IEEE T-ITS)

Game-theoretic models can resolve vehicle interactions without hand-written priority rules, but whether they describe human drivers once calibrated has rarely been tested. This study formulates a general-sum differential game of vehicle interactions at urban intersections, calibrates it to observed driving, and evaluates it on data not used for calibration. Each vehicle minimizes a cost that combines speed tracking, adherence to a map-derived lane route, control effort, gap keeping based on the intelligent driver model, a predictive conflict term, and a contact barrier, while perceiving the other vehicles with a delay. The game is solved with a feedback iterative linear-quadratic algorithm, and ten behavioral parameters per vehicle are calibrated by Bayesian optimization on trajectories recorded at four intersections in Washington, D.C. The calibrated game reproduces the trajectories of 819 vehicles with a mean position error of 1.00 m. When only each vehicle's route is known, as in a simulator, it is the most accurate of the compared models on 96 held-out vehicles (7.42 m), and ten-fold cross-validation shows that it is significantly more accurate than calibrated SUMO (by 3.61 m), an inverse reinforcement learning model (by 0.93 m), and independent and cooperative variants of the same model (by 0.33 and 0.32 m). The solutions, computed in 2.1 s for a typical interaction, are verified approximate equilibria. Finally, the conflict and steering weights, which the data do not identify, can be set from safety and comfort targets; together with a stiffer contact barrier, this removes the collisions that otherwise occur in 43% of tight closed-loop conflicts.

0.34

SceneFactory-3D: Lifting 2D Traffic Scenes into 3D Physical Counterfactuals for Scalable Physically Grounded Safety Evaluation

cs.RO cs.MA ·2026-10-02 ·Yicheng Zhu, Linfeng Tian, Tianmu Zhao, Yang Chen, Fan Zuo +2 more
code/data similarity 0.65
Abstract

Scalable driving simulators typically execute vehicle commands using prescribed behavioral or kinematic rules, overlooking the physics of tire-road interfaces, thereby limiting their ability to capture how adverse road and environmental conditions alter vehicle execution and propagate through traffic. To address this limitation, we present SceneFactory-3D, a GPU-batched, physics-grounded multi-agent driving simulator. Vehicles execute acceleration and steering commands via suspension- and friction-limited forces evaluated at each wheel-contact point. Spatially varying friction, per-world 3D heightfields, gravity, and rigid contact consistently govern wheel motion and chassis collisions. Per-world terrain isolation and GPU batching enable SceneFactory-3D to run matched physical counterfactuals in parallel: traffic scenario setup and vehicle controllers remain fixed while only the road condition changes, enabling the resulting closed-loop effects to be evaluated across parallel worlds. To demonstrate the advantage of the SceneFactory-3D-enabled counterfactual evaluation, we conduct an empirical study on vehicle controllers' sensitivity to road conditions. We study three learned-policy families on 1,024 matched 12-vehicle worlds per condition, and two classical planners on a shared 32-world subset, across 21 friction and grade conditions. When friction drops from 1.0 to 0.18, the share of vehicles that clear the work zone safely falls by 6 to 90 percentage points across learned policies (18-19 for classical planners), and near-collision situations become more frequent for every learned policy. Code: https://github.com/SmallWorldLab/SceneFactory_3D

0.32

Hardware-in-the-Loop Demo of a Cooperative Intersection where Cars don't Stop

cs.AR ·2026-10-09 ·Lorenzo Farina, Matteo Piccoli, Salvatore Iandolo, Antonio Solida, Carlo Augusto Grazia +4 more
published similarity 0.64
Abstract · 3 pages, 3 figures, accepted at IEEE CSCN 2025

The road transportation sector is undergoing a radical transformation, working for a future where all vehicles will be autonomous and connected. A key challenge in this vision concerns intersections, which will no longer rely on traffic lights or traditional right-of-way rules. Instead, algorithms and communication protocols will be employed to optimize traffic flow. In this context, we are developing a testbed where cars equipped with wireless connectivity exchange information with a remote controller and coordinate their maneuvers. As the vehicles navigate through different types of intersections with various routes, they communicate with the controller, adjusting their speed to pass through intersections without stopping. This demo specifically showcases a hardware-in-the-loop (HiL) implementation of such intelligent intersection, using the SUMO traffic simulator to emulate vehicle positions. Real hardware and software components, which are designed for use in vehicles and roadside infrastructure, are employed to enable real-time data exchange of contextual and control information, running the cooperative coordination algorithm.

0.36

CoSafe: Cooperative Runtime Safety Assurance for Mixed-Traffic Autonomous Driving

cs.SE cs.AIcs.RO ·2026-11-04 ·Dingji Wang, You Lu, Haowen Jiang, Yanggang Chen, Yuyang Bi +3 more
top venuebenchmark similarity 0.62
Abstract · Accepted by the 49th IEEE/ACM International Conference on Software Engineering (ICSE 2027). 13 pages

With the rapid development of autonomous driving systems (ADSes), real-world roads are evolving into mixed-traffic environments where autonomous vehicles (AVs) and other traffic participants (e.g., human-driven vehicles (HDVs), cyclists, and pedestrians) coexist and interact with each other. However, current ADSes still incur various safety violations in mixed traffic scenarios, raising a strong demand for runtime safety assurance frameworks that can continuously monitor hazards and prevent potential violations. Existing ego-centric assurance approaches are insufficient for mixed traffic, where violations often arise from locally reasonable yet jointly incompatible decisions among multiple vehicles and cannot be reliably resolved through independent takeover. To bridge this gap, we propose CoSafe, a modular and ADS-agnostic cooperative runtime safety assurance framework for mixed-traffic autonomous driving to extend runtime safety assurance from ego-centric takeover to scene-level cooperative intervention. CoSafe leverages vehicle-to-everything (V2X) communication to enable roadside units (RSUs) to monitor scene-level hazards and jointly mitigate hazards involving multiple vehicles. We integrate CoSafe with seven state-of-the-art ADSes, and our evaluation on the InterDrive benchmark demonstrates that CoSafe improves the driving score of AVs by 70.03% on average, reduces safety violations by 87.80%, and accurately identifies unsafe AVs with an F3 score of 0.930, while satisfying real-time constraints.

0.48

Automated-Truck Penetration Shapes Human Drivers' Car-Following Margins Near Motorway Ramps: A Driving-Simulator Study

cs.ET ·2026-11-17 ·Minhao Chen, Zehao Jiang, Julius Secadiningrat, Elnaz Irannezhad
similarity 0.62
Abstract · 31 pages, 7 figures, 5 tables

Automated-vehicle dedicated lanes (AVDLs) are proposed as transitional infrastructure for mixed traffic, but their effect near ramps, and that of automated trucks, on the human drivers sharing the road has rarely been observed. In a mixed-design driving-simulator experiment, 63 drivers were assigned to one of four layouts (an AVDL extending beyond, coinciding with, or ending inside a 1.5-km ramp weaving section, or no AVDL) and drove at four automated-truck penetration levels from 20% to 80%. Linear mixed-effects models with participant random effects and multiplicity control were used. Higher penetration reduced the share of car-following time at gaps below 1.5 s from 28.5% to 18.1% (Holm-adjusted p = .006). This was explained by leader composition: drivers spent 8% of following time behind a truck at 20% penetration and 48% at 80%, kept longer gaps behind trucks, and did not change their gaps within leader type. AVDL layout had no detectable effect on safety margins, rear-end conflict rates, travel time or speed (differences bounded within plus or minus 5 s per section) and no significant effect on workload. Between-driver differences accounted for 52% to 77% of the variance in the main outcomes. Mixed-traffic models should therefore represent human car-following as leader-type-dependent and heterogeneous.

0.31

High-Fidelity Multi-Body Simulator for Autonomous Racing

cs.RO eess.SY ·2026-09-11 ·Nicola Musiu, Francesco Iacovacci, Fausto Lupo, Matteo Pini, Giovanni Scapicchi +9 more
similarity 0.62
Abstract

We present a custom high-fidelity vehicle dynamics simulation environment for testing and validation of Autonomous Racing software. The digital twin of the autonomous vehicle is developed in Dymola, using racecar dynamics modeling libraries to build a complete multi-body model. A 3D road surface, including elevation profiles and curbs, is implemented using the Curved Regular Grid (CRG) standard. The model is exported from Dymola as a Functional Mock-up Unit (FMU) and integrated into a custom software-in-the-loop simulator, where communication interfaces with the autonomous racing stack were developed in C++. A calibration procedure based on experimental data is also presented, along with a validation study to further support the quality of the proposed framework. The simulator runs in real time on a portable computer and provides reliable ground truth for algorithms validation prior to real-world deployment.

0.20