CS Paper Radar

High-Fidelity Multi-Body Simulator for Autonomous Racing

Nicola Musiu, Francesco Iacovacci, Fausto Lupo, Matteo Pini, Giovanni Scapicchi, Francesco Moretti, Eugenio Mascaro, Pietro Musso, Ayoub Raji, Marko Bertogna, Vincenzo Maria Arricale, Angelo Lo Sapio, Alessandro Piccarelli, Garron Fish

cs.RO eess.SY ·submitted 2026-09-11 12:56 UTC · v1

Abstract

We present a custom high-fidelity vehicle dynamics simulation environment for testing and validation of Autonomous Racing software. The digital twin of the autonomous vehicle is developed in Dymola, using racecar dynamics modeling libraries to build a complete multi-body model. A 3D road surface, including elevation profiles and curbs, is implemented using the Curved Regular Grid (CRG) standard. The model is exported from Dymola as a Functional Mock-up Unit (FMU) and integrated into a custom software-in-the-loop simulator, where communication interfaces with the autonomous racing stack were developed in C++. A calibration procedure based on experimental data is also presented, along with a validation study to further support the quality of the proposed framework. The simulator runs in real time on a portable computer and provides reliable ground truth for algorithms validation prior to real-world deployment.

Closest papers

Nearest neighbours by meaning across the whole index.

Beyond the Plane: Coupling Planar Vehicle Dynamics with Three-Dimensional Road Geometry

cs.RO ·2026-08-10 ·Simon Sagmeister, Phillip Pitschi, Nico Haja, Markus Lienkamp
code/data similarity 0.64
Abstract

Simulation is crucial for developing and testing autonomous driving systems. In particular, the development of localization and control algorithms relies on an accurate vehicle dynamics simulation. However, most vehicle dynamics models are two-dimensional while real-world roads are three-dimensional. For example, effects from the three-dimensional road geometry on the Las Vegas Motor Speedway can increase the normal forces on the tires by more than 66% compared to the nominal load at standstill. As a result, even highly detailed planar vehicle dynamics models struggle to accurately reproduce the real vehicle's behavior. While solutions for three-dimensional vehicle dynamics exist, they are rarely adopted, computationally expensive, and complex. To address this issue, we present a novel method to couple planar vehicle dynamics models with real-world three-dimensional road geometry. We transform the planar vehicle state from the vehicle model's two-dimensional plane to its corresponding representation in three-dimensional space. Additionally, we calculate road-geometry-induced forces and moments and apply them to the planar vehicle model. We validate our approach using high-speed data recorded with a full-scale race car on the banked Las Vegas Motor Speedway. Furthermore, on synthetic tracks, we show that our method yields accurate results even in edge cases. Together, our results demonstrate that the gap between planar simulation and real-world three-dimensional roads can be closed without abandoning simpler planar models. To simplify adoption of our method, we provide the implementation as open-source software on github.com/TUMFTM/3d-road-geometry-coupling.

0.24

SceneFactory-3D: Lifting 2D Traffic Scenes into 3D Physical Counterfactuals for Scalable Physically Grounded Safety Evaluation

cs.RO cs.MA ·2026-10-02 ·Yicheng Zhu, Linfeng Tian, Tianmu Zhao, Yang Chen, Fan Zuo +2 more
code/data similarity 0.63
Abstract

Scalable driving simulators typically execute vehicle commands using prescribed behavioral or kinematic rules, overlooking the physics of tire-road interfaces, thereby limiting their ability to capture how adverse road and environmental conditions alter vehicle execution and propagate through traffic. To address this limitation, we present SceneFactory-3D, a GPU-batched, physics-grounded multi-agent driving simulator. Vehicles execute acceleration and steering commands via suspension- and friction-limited forces evaluated at each wheel-contact point. Spatially varying friction, per-world 3D heightfields, gravity, and rigid contact consistently govern wheel motion and chassis collisions. Per-world terrain isolation and GPU batching enable SceneFactory-3D to run matched physical counterfactuals in parallel: traffic scenario setup and vehicle controllers remain fixed while only the road condition changes, enabling the resulting closed-loop effects to be evaluated across parallel worlds. To demonstrate the advantage of the SceneFactory-3D-enabled counterfactual evaluation, we conduct an empirical study on vehicle controllers' sensitivity to road conditions. We study three learned-policy families on 1,024 matched 12-vehicle worlds per condition, and two classical planners on a shared 32-world subset, across 21 friction and grade conditions. When friction drops from 1.0 to 0.18, the share of vehicles that clear the work zone safely falls by 6 to 90 percentage points across learned policies (18-19 for classical planners), and near-collision situations become more frequent for every learned policy. Code: https://github.com/SmallWorldLab/SceneFactory_3D

0.32

InterSim: Innovative Intersection Digital Twins for Human-in-the-Loop Driving Simulation

cs.CE cs.CYcs.ET ·2026-11-04 ·Luyang Jiang, Chuheng Wei, Yaguang Li, Shaoqi Wang, Yupeng Zhou +4 more
code/data similarity 0.62
Abstract

Innovative intersection designs can improve roadway safety and operational efficiency, but their uncommon geometries may create challenges for driver comprehension during early deployment. Evaluating these designs through full-scale field implementation can also be costly. This paper presents InterSim, a Unity game engine-based human-in-the-loop (HITL) driving simulator that constructs digital twins of site-specific innovative intersections in a virtual environment. InterSim links the real world and the simulation world through two closed cycles: a digital twin cycle that builds each intersection twin from agency design and traffic data and returns evidence from simulation to the agency, and an HITL cycle in which human drivers or automated driving algorithms operate the ego vehicle under identical scenario conditions. The research capabilities of InterSim are demonstrated through two case studies: a surrogate safety study compares post-encroachment time distributions between a Reduced Conflict Intersection and a standard intersection under different traffic volumes; an eco-driving study compares human drivers with a rule-based agent using vehicle-to-infrastructure information and reveals differences in emission and driving behavior. These studies demonstrate that InterSim provides a reusable digital twin platform for investigating innovative intersection designs from diverse perspectives. Demo video and open-source code can be accessed at https://purduedigitaltwin.github.io/InterSim/

0.27

Mission Performance: Automatic and Adaptive Race Pace Progression for Autonomous Racing

cs.RO cs.SEeess.SY ·2026-09-10 ·Giovanni Lambertini, Matteo Pini, Nicola Musiu, Ayoub Raji, Francesco Iacovacci +1 more
published similarity 0.62
Abstract · Accepted to the 2026 IEEE International Conference on Intelligent Transportation Systems (ITSC 2026)

In this paper, we describe the Mission Performance module implemented for a fully autonomous racing car to automatically manage the longitudinal, lateral, and combined performances, aiming to speedup the laptime progression while assuring safety. Motivated by the difficulty and risks of applying the real-time estimation of the grip to critical modules like the motion planner and controller, the Mission Performance guides these modules adapting their target performance instead of changing the vehicle model parameters. The module is formed by pre-defined progressions to warm up the tires at the beginning of a run. Then, the system continuously monitors safety and vehicle dynamics metrics on a per-sector basis to adaptively reduce, maintain, or increase the performance levels for each sector, progressively converging toward the maximum allowed value. The solution's effectiveness is demonstrated on the EAV-25, a fully autonomous Dallara Superformula, at the Yas Marina Circuit during the Abu Dhabi Autonomous Racing League (A2RL) Season 2.

0.35

EViDS: An Environment--Vehicle Dynamics Integrated Simulation Platform for Intelligent Chassis Development

cs.RO ·2026-11-13 ·Lu Xiong, Yiming Zhou, Xuge Hu, Yi Zhang, Haoran Lv +1 more
similarity 0.61
Abstract

The development of intelligent chassis increasingly requires the integration of environmental and perception information with high-fidelity vehicle dynamics to support environment-aware intelligent chassis control. However, existing autonomous-driving simulators and professional vehicle-dynamics tools are generally developed for different purposes, making it difficult to integrate environmental information, vehicle dynamics, and chassis algorithms. This paper proposes EViDS, an Environment-Vehicle Dynamics Integrated Simulation Platform for Intelligent Chassis Development. EViDS integrates CARLA-based environment and sensor simulation with CarSim-based high-fidelity vehicle dynamics. Reference-pose-based state alignment and multi-rate interaction maintain spatial and temporal consistency, while ray-casting-based tire-road interaction transfers environmental information to the vehicle-dynamics model. Scenario configuration, synchronized data acquisition, and algorithm interfaces further support intelligent chassis development. The platform is evaluated through environment-dynamics interaction tests with vehicle-dynamics consistency comparisons, together with intelligent chassis applications. Results show that EViDS preserves vehicle-dynamics characteristics, reliably transfers environmental information, and supports online closed-loop intelligent chassis control, providing a unified simulation basis for environment-aware intelligent chassis development and validation.

0.22

Empirically Calibrated Differential Games for Simulating Driver Interactions

cs.MA math.OC ·2026-10-23 ·Amirmohammad Khakpour, Nachuan Li, Pedram Beigi, Yu, Nie
published similarity 0.60
Abstract · This manuscript is intended for submission to IEEE Transactions on Intelligent Transportation Systems (IEEE T-ITS)

Game-theoretic models can resolve vehicle interactions without hand-written priority rules, but whether they describe human drivers once calibrated has rarely been tested. This study formulates a general-sum differential game of vehicle interactions at urban intersections, calibrates it to observed driving, and evaluates it on data not used for calibration. Each vehicle minimizes a cost that combines speed tracking, adherence to a map-derived lane route, control effort, gap keeping based on the intelligent driver model, a predictive conflict term, and a contact barrier, while perceiving the other vehicles with a delay. The game is solved with a feedback iterative linear-quadratic algorithm, and ten behavioral parameters per vehicle are calibrated by Bayesian optimization on trajectories recorded at four intersections in Washington, D.C. The calibrated game reproduces the trajectories of 819 vehicles with a mean position error of 1.00 m. When only each vehicle's route is known, as in a simulator, it is the most accurate of the compared models on 96 held-out vehicles (7.42 m), and ten-fold cross-validation shows that it is significantly more accurate than calibrated SUMO (by 3.61 m), an inverse reinforcement learning model (by 0.93 m), and independent and cooperative variants of the same model (by 0.33 and 0.32 m). The solutions, computed in 2.1 s for a typical interaction, are verified approximate equilibria. Finally, the conflict and steering weights, which the data do not identify, can be set from safety and comfort targets; together with a stiffer contact barrier, this removes the collisions that otherwise occur in 43% of tight closed-loop conflicts.

0.34

RoboRacer Arena: Specification-Driven Track Construction for Autonomous Racing

cs.RO ·2026-08-24 ·Mihaela-Larisa Clement, Agnes Poks, Ezio Bartocci
benchmark similarity 0.60
Abstract · Submitted to ICRA 2027

Learning-based autonomous racing relies on diverse training environments, yet constructing a new track requires geometric design, validation, and simulation-asset generation. This coupling makes track geometry difficult to vary systematically during policy training and evaluation. To address this limitation, we present RoboRacer Arena, a specification-driven pipeline that exposes track geometry as an explicit experimental variable. Starting from natural-language requirements, a seeded coverage-guided constructor generates closed-loop layouts, validates the exported occupancy maps, and automatically builds the corresponding Isaac Sim environments. The same interface admits recorded maps and scaled circuits, yielding an initial reference collection of 130 tracks. Across our evaluation, RoboRacer Arena achieves the highest valid-map generation rate among the tested construction procedures under their respective computational budgets and converts eight benchmark maps into simulation assets in less than 2.5 seconds each. We further reconstruct the RoboRacer vehicle as a CAD and USD asset and use it for parallel residual-policy training and deployment on the physical platform. In physical experiments, policies trained with RoboRacer Arena complete ten consecutive laps at command settings up to four times the nominal training speed. These results demonstrate that explicit track requirements can be connected to validated simulation assets and physical evaluation within a reproducible autonomous-racing workflow.

0.11

A Low-Cost, Open Platform for End-to-End Autonomous Driving on a Miniature Ackermann Vehicle

cs.LG cs.AIcs.RO ·2026-09-03 ·Gustavo Claudio Karl Couto, Eric Aislan Antonelo, Gabriel George Zipperer
similarity 0.59
Abstract

This paper presents a low-cost, open experimental platform for research in end-to-end autonomous driving with miniature Ackermann vehicles. The platform combines a physical vehicle, a printed urban track, data collection tools, trajectory registration, and a Webots digital twin, enabling controlled experiments that connect simulation-based autonomous-driving methods to real-world execution. As a first baseline, we implement command-conditioned behavior cloning, in which a neural policy receives an on-board camera image and a high-level navigation command and outputs steering and speed. The system is evaluated both on the physical vehicle and in simulation. In real closed-loop experiments, the learned policy follows lanes and executes commanded turns, reaching a mean cross-track error of 6.1 cm with respect to the reference route, close to the 4.7 cm observed in human demonstrations. In the digital twin, camera field of view has a strong effect on performance, reducing the mean cross-track error from 35.6 to 3.3 cm when widened from 58 to 120 degrees. Using the digital twin to generate synthetic driving data and a learned sim-to-real image translator to reduce the appearance gap, we further show that a higher-capacity policy trained on this synthetic data combined with real demonstrations is the only configuration that completes all four track routes in closed loop, whereas the compact baseline and the same network trained on real data alone complete fewer. These results establish the open platform as a practical testbed for sim-to-real studies and provide an initial command-conditioned imitation-learning baseline; we release it to support reproducible research.

0.30