CS Paper Radar

Beyond the Plane: Coupling Planar Vehicle Dynamics with Three-Dimensional Road Geometry

Simon Sagmeister, Phillip Pitschi, Nico Haja, Markus Lienkamp

cs.RO ·submitted 2026-08-10 10:28 UTC · v1
code/data

Abstract

Simulation is crucial for developing and testing autonomous driving systems. In particular, the development of localization and control algorithms relies on an accurate vehicle dynamics simulation. However, most vehicle dynamics models are two-dimensional while real-world roads are three-dimensional. For example, effects from the three-dimensional road geometry on the Las Vegas Motor Speedway can increase the normal forces on the tires by more than 66% compared to the nominal load at standstill. As a result, even highly detailed planar vehicle dynamics models struggle to accurately reproduce the real vehicle's behavior. While solutions for three-dimensional vehicle dynamics exist, they are rarely adopted, computationally expensive, and complex. To address this issue, we present a novel method to couple planar vehicle dynamics models with real-world three-dimensional road geometry. We transform the planar vehicle state from the vehicle model's two-dimensional plane to its corresponding representation in three-dimensional space. Additionally, we calculate road-geometry-induced forces and moments and apply them to the planar vehicle model. We validate our approach using high-speed data recorded with a full-scale race car on the banked Las Vegas Motor Speedway. Furthermore, on synthetic tracks, we show that our method yields accurate results even in edge cases. Together, our results demonstrate that the gap between planar simulation and real-world three-dimensional roads can be closed without abandoning simpler planar models. To simplify adoption of our method, we provide the implementation as open-source software on github.com/TUMFTM/3d-road-geometry-coupling.

Closest papers

Nearest neighbours by meaning across the whole index.

TerrainForge: Physics-Grounded Road Geometry Editing for Counterfactual Autonomous Driving

cs.CV ·2026-10-02 ·Yang Chen, Yicheng Zhu, zhenning Li, Tao Li, Zilin Bian
similarity 0.68
Abstract

Road geometry (e.g., crests, sags, and speed humps) and surface conditions (e.g., wet or icy pavement) affect how vehicles move, what drivers and onboard cameras observe, and how much clearance remains between vehicles. Editing these properties in a driving scene therefore requires corresponding changes in vehicle motion. Capturing these differences in a driving video requires a road edit to propagate to vehicle motion, camera viewpoint, and the clearance between vehicles. We present TerrainForge, a framework for generating road geometry-focused counterfactuals from reconstructed multi-vehicle driving episodes. A unified road model connects scene deformation with four-wheel vehicle dynamics, allowing crests, sags, speed humps, and friction changes to propagate through vehicle motion, camera viewpoint, and inter-vehicle clearance. Vehicle dynamics are evaluated against CarSim, and prescribed road geometry is verified in reconstructed Waymo scenes. Across 18 episodes, leaving surrounding vehicles on their recorded trajectories instead of recomputing their responses produces median peak differences in predicted ego-lead distance of 1.52 m for crests and 1.41 m for sags. We further simulate the ego response to 15,758 road edits across 983 braking episodes, pairing each edit with its safety outcomes relative to an unedited replay. These pairs train a first-stage screening surrogate that takes the original driving context and candidate road-edit parameters as input and predicts the resulting change in the ego's terminal gap. On held-out scenes, this prediction achieves 22-40% lower mean absolute error than predicting no change, so candidates can be screened cheaply before the full multi-vehicle rollout.

0.20

SceneFactory-3D: Lifting 2D Traffic Scenes into 3D Physical Counterfactuals for Scalable Physically Grounded Safety Evaluation

cs.RO cs.MA ·2026-10-02 ·Yicheng Zhu, Linfeng Tian, Tianmu Zhao, Yang Chen, Fan Zuo +2 more
code/data similarity 0.66
Abstract

Scalable driving simulators typically execute vehicle commands using prescribed behavioral or kinematic rules, overlooking the physics of tire-road interfaces, thereby limiting their ability to capture how adverse road and environmental conditions alter vehicle execution and propagate through traffic. To address this limitation, we present SceneFactory-3D, a GPU-batched, physics-grounded multi-agent driving simulator. Vehicles execute acceleration and steering commands via suspension- and friction-limited forces evaluated at each wheel-contact point. Spatially varying friction, per-world 3D heightfields, gravity, and rigid contact consistently govern wheel motion and chassis collisions. Per-world terrain isolation and GPU batching enable SceneFactory-3D to run matched physical counterfactuals in parallel: traffic scenario setup and vehicle controllers remain fixed while only the road condition changes, enabling the resulting closed-loop effects to be evaluated across parallel worlds. To demonstrate the advantage of the SceneFactory-3D-enabled counterfactual evaluation, we conduct an empirical study on vehicle controllers' sensitivity to road conditions. We study three learned-policy families on 1,024 matched 12-vehicle worlds per condition, and two classical planners on a shared 32-world subset, across 21 friction and grade conditions. When friction drops from 1.0 to 0.18, the share of vehicles that clear the work zone safely falls by 6 to 90 percentage points across learned policies (18-19 for classical planners), and near-collision situations become more frequent for every learned policy. Code: https://github.com/SmallWorldLab/SceneFactory_3D

0.32

High-Fidelity Multi-Body Simulator for Autonomous Racing

cs.RO eess.SY ·2026-09-11 ·Nicola Musiu, Francesco Iacovacci, Fausto Lupo, Matteo Pini, Giovanni Scapicchi +9 more
similarity 0.64
Abstract

We present a custom high-fidelity vehicle dynamics simulation environment for testing and validation of Autonomous Racing software. The digital twin of the autonomous vehicle is developed in Dymola, using racecar dynamics modeling libraries to build a complete multi-body model. A 3D road surface, including elevation profiles and curbs, is implemented using the Curved Regular Grid (CRG) standard. The model is exported from Dymola as a Functional Mock-up Unit (FMU) and integrated into a custom software-in-the-loop simulator, where communication interfaces with the autonomous racing stack were developed in C++. A calibration procedure based on experimental data is also presented, along with a validation study to further support the quality of the proposed framework. The simulator runs in real time on a portable computer and provides reliable ground truth for algorithms validation prior to real-world deployment.

0.20

Empirically Calibrated Differential Games for Simulating Driver Interactions

cs.MA math.OC ·2026-10-23 ·Amirmohammad Khakpour, Nachuan Li, Pedram Beigi, Yu, Nie
published similarity 0.64
Abstract · This manuscript is intended for submission to IEEE Transactions on Intelligent Transportation Systems (IEEE T-ITS)

Game-theoretic models can resolve vehicle interactions without hand-written priority rules, but whether they describe human drivers once calibrated has rarely been tested. This study formulates a general-sum differential game of vehicle interactions at urban intersections, calibrates it to observed driving, and evaluates it on data not used for calibration. Each vehicle minimizes a cost that combines speed tracking, adherence to a map-derived lane route, control effort, gap keeping based on the intelligent driver model, a predictive conflict term, and a contact barrier, while perceiving the other vehicles with a delay. The game is solved with a feedback iterative linear-quadratic algorithm, and ten behavioral parameters per vehicle are calibrated by Bayesian optimization on trajectories recorded at four intersections in Washington, D.C. The calibrated game reproduces the trajectories of 819 vehicles with a mean position error of 1.00 m. When only each vehicle's route is known, as in a simulator, it is the most accurate of the compared models on 96 held-out vehicles (7.42 m), and ten-fold cross-validation shows that it is significantly more accurate than calibrated SUMO (by 3.61 m), an inverse reinforcement learning model (by 0.93 m), and independent and cooperative variants of the same model (by 0.33 and 0.32 m). The solutions, computed in 2.1 s for a typical interaction, are verified approximate equilibria. Finally, the conflict and steering weights, which the data do not identify, can be set from safety and comfort targets; together with a stiffer contact barrier, this removes the collisions that otherwise occur in 43% of tight closed-loop conflicts.

0.34

VehDyn: A Driving World Model Benchmark for Vehicle Dynamics

cs.CV cs.AIcs.ETcs.RO ·2026-09-27 ·Tianyi Wang, Wangsheng Du, Jiazhou Chen, Tianyi Zeng, Xiangyu Li +10 more
benchmark similarity 0.62
Abstract · 48 pages, 27 figures, 19 tables

Video world models are emerging as data engines, action planners, and generative simulators for autonomous driving, but existing benchmarks primarily assess visual fidelity and coarse physical plausibility, providing limited evidence on whether generated driving futures obey realistic vehicle kinematics and dynamics. This limitation is further compounded by the lack of datasets in which vehicle, road, maneuver, and speed conditions are independently controlled, and ground-truth vehicle states are recorded in synchrony with videos. We introduce VehDyn, a driving world model benchmark for vehicle dynamics. VehDyn is built on a CARLA-CarSim co-simulation platform where photorealistic rendering is coupled with a validated multi-body dynamics model, and it contains 10,080 configurations from a full factorial design over five vehicle types, four tire-road friction coefficients, three maneuvers, four target speeds, 14 scenes, and three illuminations, each paired with synchronized position, velocity, and attitude sequences. Built on this dataset, VehDyn introduces a hierarchical evaluation framework that measures trajectory alignment, kinematic consistency, and dynamic consistency, and benchmarks 12 state-of-the-art video world models. We further assess the video quality using two established protocols and correlate it with the VehDyn score. Trajectory-level metrics are nearly saturated, with ten of twelve models within 20\% of ground truth, while no model reaches 92\% of ground truth on dynamic consistency, and visual-quality metrics are only weakly correlated with vehicle-dynamics fidelity. DrivingWorld achieves the highest VehDyn score, followed by Cosmos 3 Nano and LTX-Video 2.5, and the VehDyn score agrees closely with human judgment. VehDyn provides a systematic foundation for developing driving world models that are physically consistent and visually realistic.

0.29

The Flat Earth Error: Differential Geometry in Vehicle Dynamics

eess.SY ·2026-08-25 ·David J. N. Limebeer, Charl van de Merwe
benchmark similarity 0.61
Abstract · 38 pages, 12 figures, 3 tables

The widespread idealization of road surfaces as horizontal planes can introduce significant inaccuracies into vehicle dynamics simulations, a phenomenon termed the ``Flat Earth Error.'' This article provides an expository guide to the use of classical differential geometry to model vehicular motion on curved surfaces. The influence of road curvature is characterized using the metric tensor, the second fundamental form, the shape operator, and the Christoffel symbols. Reproducible MATLAB scripts using an elliptic cone as a benchmark example illustrate the construction of geodesic curves and the simulation of particle dynamics on curved surfaces. The resulting geometric structures are integrated into a single-track vehicle-and-track model within a pseudospectral optimal control framework. Trajectory optimization results over a high-density mobile LiDAR profile of Darlington Raceway are used to generate a high-fidelity road-surface model. This model is used within an hp-adaptive collocation framework to investigate minimum lap time optimal control vehicular trajectories. These computations capture the non-smooth traction saturation limits of the tyres alongside position-dependent variations in gravitational forcing. Integrating differential geometry, multibody mechanics, and optimal control is essential for high-fidelity driven and autonomous vehicle-dynamics simulations. The optimized velocity and tyre slip profiles show that real-world racing track geometries induce dynamically significant three-dimensional effects. These results are particularly relevant to performance-limited simulations on highly banked track surfaces such as NASCAR ovals.

0.19

Ego2Flow: Benchmarking the Traffic-System Impact of Autonomous Driving on Maps Distilled from Real-World Roads

cs.RO cs.CV ·2026-11-13 ·Yu Dong, Weiying Shen, Hangyu Li, Shu Han, Hong Li +6 more
benchmarkcode/data similarity 0.61
Abstract

End-to-end autonomous driving is predominantly evaluated through ego-vehicle safety and task completion. Its deployment in urban traffic, however, creates sustained interactions among vehicles whose collective effects remain insufficiently evaluated. We introduce Ego2Flow, a closed-loop benchmark for assessing the traffic-system impact of autonomous driving on maps distilled from real-world cities. To construct realistic 3D urban environments for sustained closed-loop traffic simulation, we develop an agent-guided map distillation framework that integrates real-world maps and observations with complementary geographic information. Through an iterative feedback mechanism and a traffic information graph that jointly guide scene generation, the framework preserves lane topology, critical road geometry and decision-relevant visual conditions while simplifying nonessential details and completing unobserved regions. Using our proposed framework, we generate and publicly release six CARLA maps from the Argoverse 2 dataset, covering the corresponding real-world regions and enabling paired comparisons of driving behavior under real and simulated observations. On these maps, Ego2Flow evaluates how autonomous driving policies affect traffic efficiency, safety, stability and energy consumption across diverse road structures. Compared with existing construction methods, our framework achieves the lowest average displacement error between planning outputs from paired real and simulated observations. We further benchmark representative driving policies to characterize their system-level impact on urban traffic. Project Page: https://github.com/Fisher-007/Ego2Flow.

0.36

Differentiable Dynamics for Autonomous Micro-Mobility Navigation

cs.RO ·2026-09-25 ·Grace Cai, Joey Lee, Nithin Parepally, Laura Zheng, Ming C. Lin
similarity 0.60
Abstract

Autonomous micro-mobility vehicles (MMVs) such as wheelchairs, scooters, and bicycles have the potential to improve mobility access and support safe low-speed transportation in pedestrian-shared spaces. Achieving MMV autonomy will require realistic, predictable MMV motion. However, many existing autonomous vehicle stacks rely on simplified kinematic models that fail to capture key MMV characteristics such as tire slip, friction, and wheel layouts, limiting realism and gradient-based optimization. In this paper, we explore differentiable formulations of dynamics models for autonomous micro-mobility systems. We first construct DiffKBM, a differentiable version of the kinematic bicycle model (KBM). Then, we introduce DiffGM3, a differentiable formulation of the General Micro-Mobility Model (GM3), a unified tire-based dynamics formulation for micro-mobility vehicles that supports a wide range of MMV configurations. DiffKBM and DiffGM3 enable end-to-end differentiable optimization through MMV dynamics, making them suitable for integration into differentiable autonomy stacks. We evaluate these dynamics models in both open-loop and closed-loop settings: (1) open-loop trajectory matching, where DiffKBM and DiffGM3 are integrated as a dynamics layer within DiffStack and optimized to reproduce real-world MMV trajectories, and (2) closed-loop autonomous navigation, where DiffKBM and DiffGM3 are paired with a differentiable MPC controller in CrowdNav pedestrian scenarios. In the open-loop setting, DiffGM3 outperforms DiffKBM in reproducing trajectories with improvements in ADE and NLL across bicycle, scooter, and motorcycle modes, and reductions in planning loss for bicycle and motorcycle trajectories. We also find that, in closed-loop settings, DiffGM3 improves on DiffKBM's CrowdNav performance by producing 55\% fewer collisions and a 75\% lower discomfort frequency for the bicycle mode.

0.32