CS Paper Radar

The Flat Earth Error: Differential Geometry in Vehicle Dynamics

David J. N. Limebeer, Charl van de Merwe

eess.SY ·submitted 2026-08-25 09:04 UTC · v1
benchmark

Abstract

The widespread idealization of road surfaces as horizontal planes can introduce significant inaccuracies into vehicle dynamics simulations, a phenomenon termed the ``Flat Earth Error.'' This article provides an expository guide to the use of classical differential geometry to model vehicular motion on curved surfaces. The influence of road curvature is characterized using the metric tensor, the second fundamental form, the shape operator, and the Christoffel symbols. Reproducible MATLAB scripts using an elliptic cone as a benchmark example illustrate the construction of geodesic curves and the simulation of particle dynamics on curved surfaces. The resulting geometric structures are integrated into a single-track vehicle-and-track model within a pseudospectral optimal control framework. Trajectory optimization results over a high-density mobile LiDAR profile of Darlington Raceway are used to generate a high-fidelity road-surface model. This model is used within an hp-adaptive collocation framework to investigate minimum lap time optimal control vehicular trajectories. These computations capture the non-smooth traction saturation limits of the tyres alongside position-dependent variations in gravitational forcing. Integrating differential geometry, multibody mechanics, and optimal control is essential for high-fidelity driven and autonomous vehicle-dynamics simulations. The optimized velocity and tyre slip profiles show that real-world racing track geometries induce dynamically significant three-dimensional effects. These results are particularly relevant to performance-limited simulations on highly banked track surfaces such as NASCAR ovals.

Comment
38 pages, 12 figures, 3 tables

Closest papers

Nearest neighbours by meaning across the whole index.

A Singularity Avoiding Track Model for Race Car Optimization

cs.RO eess.SY ·2026-10-27 ·Adwait Verulkar, Behzad Danaei, Srikanth Sivaramakrishnan, Ryan Trinter
similarity 0.63
Abstract · American Modelica & FMI Conference 2026

A track fitting pipeline is presented that converts a measured racetrack point cloud into a closed, $C^4$ differentiable, three-dimensional surface model suitable for high-fidelity Modelica race-car optimization. The surface is a Monge patch, parametrised by a curvilinear arc-length coordinate measured along the minimum-curvature line (MCL) and a signed lateral offset, with a height polynomial of user-selectable degree capturing the cross-sectional elevation profile. The choice of MCL as the reference line is deliberate since anchoring the same surface on the geometric centre-line can cause adjacent normals to cross inside the drivable region on tight corners. The resulting non-injective parametrisation assigns multiple curvilinear addresses to the same three-dimensional point and returns invalid road geometry. The MCL is obtained from a quadratic program that minimises integrated curvature subject to track-boundary, periodicity, and jerk-regularisation constraints. By reducing total curvature while remaining within the track bounds, the MCL moves the region of parametrisation breakdown outside the drivable strip on all circuits studied, keeps the normal map injective across the full track width, and yields a more linear time-to-arc-length transformation for minimum lap-time problems. The fitted surface and the associated track widths are exported as periodic piecewise-quintic $C^4$ B-splines, solved as a nonlinear program.

0.50

Beyond the Plane: Coupling Planar Vehicle Dynamics with Three-Dimensional Road Geometry

cs.RO ·2026-08-10 ·Simon Sagmeister, Phillip Pitschi, Nico Haja, Markus Lienkamp
code/data similarity 0.61
Abstract

Simulation is crucial for developing and testing autonomous driving systems. In particular, the development of localization and control algorithms relies on an accurate vehicle dynamics simulation. However, most vehicle dynamics models are two-dimensional while real-world roads are three-dimensional. For example, effects from the three-dimensional road geometry on the Las Vegas Motor Speedway can increase the normal forces on the tires by more than 66% compared to the nominal load at standstill. As a result, even highly detailed planar vehicle dynamics models struggle to accurately reproduce the real vehicle's behavior. While solutions for three-dimensional vehicle dynamics exist, they are rarely adopted, computationally expensive, and complex. To address this issue, we present a novel method to couple planar vehicle dynamics models with real-world three-dimensional road geometry. We transform the planar vehicle state from the vehicle model's two-dimensional plane to its corresponding representation in three-dimensional space. Additionally, we calculate road-geometry-induced forces and moments and apply them to the planar vehicle model. We validate our approach using high-speed data recorded with a full-scale race car on the banked Las Vegas Motor Speedway. Furthermore, on synthetic tracks, we show that our method yields accurate results even in edge cases. Together, our results demonstrate that the gap between planar simulation and real-world three-dimensional roads can be closed without abandoning simpler planar models. To simplify adoption of our method, we provide the implementation as open-source software on github.com/TUMFTM/3d-road-geometry-coupling.

0.24

TerrainForge: Physics-Grounded Road Geometry Editing for Counterfactual Autonomous Driving

cs.CV ·2026-10-02 ·Yang Chen, Yicheng Zhu, zhenning Li, Tao Li, Zilin Bian
similarity 0.61
Abstract

Road geometry (e.g., crests, sags, and speed humps) and surface conditions (e.g., wet or icy pavement) affect how vehicles move, what drivers and onboard cameras observe, and how much clearance remains between vehicles. Editing these properties in a driving scene therefore requires corresponding changes in vehicle motion. Capturing these differences in a driving video requires a road edit to propagate to vehicle motion, camera viewpoint, and the clearance between vehicles. We present TerrainForge, a framework for generating road geometry-focused counterfactuals from reconstructed multi-vehicle driving episodes. A unified road model connects scene deformation with four-wheel vehicle dynamics, allowing crests, sags, speed humps, and friction changes to propagate through vehicle motion, camera viewpoint, and inter-vehicle clearance. Vehicle dynamics are evaluated against CarSim, and prescribed road geometry is verified in reconstructed Waymo scenes. Across 18 episodes, leaving surrounding vehicles on their recorded trajectories instead of recomputing their responses produces median peak differences in predicted ego-lead distance of 1.52 m for crests and 1.41 m for sags. We further simulate the ego response to 15,758 road edits across 983 braking episodes, pairing each edit with its safety outcomes relative to an unedited replay. These pairs train a first-stage screening surrogate that takes the original driving context and candidate road-edit parameters as input and predicts the resulting change in the ego's terminal gap. On held-out scenes, this prediction achieves 22-40% lower mean absolute error than predicting no change, so candidates can be screened cheaply before the full multi-vehicle rollout.

0.20

Course-Referenced Lateral Control of Trail-Following Convoys: String Stability and Adaptive Feedforward under Load Uncertainty

eess.SY cs.RO ·2026-11-15 ·Nitesh Kumar, Sixu Li, Swaroop Darbha
similarity 0.60
Abstract

Vehicles in a convoy can steer along the GNSS trails of the vehicles ahead when lane markings are unavailable, as on snow covered roads. Since each vehicle's tracking error enters the reference of the next, lateral errors can grow along the convoy. This paper presents a course referenced formulation of trail following in arc length, in which each follower takes the direction of its fitted trail as its heading reference. Error propagation then reduces to a single transfer function. We derive a condition under which combining the trails of the leader and the predecessor keeps the errors bounded for any convoy length, and show that following the predecessor alone lets the errors accumulate without bound, even without amplification, on roads that end turned or shifted sideways. Passenger and cargo loads and tire stiffness vary in practice, and we show that they enter the curvature feedforward through a single coefficient, whose mismatch leaves steady offsets on curves. We propose an adaptive law that estimates this coefficient on curves and removes the offsets. Simulations of an eleven vehicle convoy confirm the analysis.

0.19

Adaptive Model Predictive Control for Ground Vehicles: Review and Demonstrative Implementation

eess.SY ·2026-08-18 ·Chetana Gadgil, Mahendra Singh Tomar
similarity 0.57
Abstract · 16 pages, 4 figures, journal

This paper reviews Adaptive Model Predictive Control (AMPC) methods for Autonomous Vehicles (AVs), focusing on control strategies that dynamically adapt to uncertainties and changing conditions in real-time. The critical role of Adaptive Model Predictive Control (AMPC) in addressing the challenges of autonomous vehicle control are discussed. For the scope of this paper, AMPC is defined as a class of Model Predictive Control (MPC) techniques that modify the system model, cost function, constraints, or prediction horizon, based on real-time data. Traditional MPC, while effective for constrained optimization, struggles with model inaccuracies, computational demands, and dynamic environments, necessitating AMPC methods. The review covers existing literature on Gain scheduled MPC, Online Model Estimation MPC, Weight Adaptive MPC, Horizon Adaptive MPC, Learning Based MPC, and Hybrid MPC that combines MPC with other control methods. In addition to the survey, a demonstrative simulation of an adaptive MPC controller is presented that illustrates practical aspects of weight and speed adaptation in trajectory tracking.

0.29

Integrated Longitudinal and Lateral Control for High-Speed Platooning of Articulated Vehicles

cs.RO eess.SY ·2026-10-21 ·Aashish Shaju, Steve Southward, Mehdi Ahmadian
published similarity 0.57
Abstract · Original manuscript of an article published in Vehicle System Dynamics on September 20, 2026. Published version: https://doi.org/10.1080/004…

This paper presents an integrated control framework for high-speed platooning of articulated vehicles, combining advanced longitudinal and lateral control strategies to address the challenges of safe and efficient autonomous driving. A novel proof of string stability for the proposed longitudinal control algorithm, based on a PID framework, ensures robust inter-vehicle distance regulation even under dynamic operating conditions. Additionally, an arc-length-based longitudinal error formulation enhances the applicability of the control system for curved roads, making it realistic for diverse driving scenarios. For lateral control, significant improvements to the clothoid-based path tracking algorithm are introduced to mitigate oscillations and enhance stability at high speeds. These enhancements include a tangential criterion for oscillation reduction, trajectory segment classification for adaptive lookahead distance tuning, a dual-adaptive mechanism for regulating the rate of lookahead distance adjustments based on both cross-track error (CTE) and anticipated road curvature, and extensions for articulated vehicle dynamics. The proposed integrated control framework is validated through simulations, demonstrating its effectiveness in maintaining stability, minimizing tracking errors, and ensuring robust performance in high-speed and challenging platooning scenarios.

0.41

High-Fidelity Multi-Body Simulator for Autonomous Racing

cs.RO eess.SY ·2026-09-11 ·Nicola Musiu, Francesco Iacovacci, Fausto Lupo, Matteo Pini, Giovanni Scapicchi +9 more
similarity 0.57
Abstract

We present a custom high-fidelity vehicle dynamics simulation environment for testing and validation of Autonomous Racing software. The digital twin of the autonomous vehicle is developed in Dymola, using racecar dynamics modeling libraries to build a complete multi-body model. A 3D road surface, including elevation profiles and curbs, is implemented using the Curved Regular Grid (CRG) standard. The model is exported from Dymola as a Functional Mock-up Unit (FMU) and integrated into a custom software-in-the-loop simulator, where communication interfaces with the autonomous racing stack were developed in C++. A calibration procedure based on experimental data is also presented, along with a validation study to further support the quality of the proposed framework. The simulator runs in real time on a portable computer and provides reliable ground truth for algorithms validation prior to real-world deployment.

0.20

GHySSeg: Real-Time Geometric Ground and Road Segmentation for Hybrid Solid-State LiDAR

cs.RO cs.CV ·2026-11-16 ·Martín Palos, Fernando García
benchmark similarity 0.57
Abstract · 14 pages, 8 figures, 3 tables. Submitted to IEEE Transactions on Intelligent Transportation Systems. This work has been submitted to the IEE…

Hybrid solid-state LiDAR sensors are making their way into production vehicles, yet the data they produce differs structurally from that of the established spinning mechanical sensors behind today's autonomous-driving datasets: it is ring-free, dense, cluttered, and concentrated in a frontal field of view. The classical geometric methods that autonomous vehicles rely on for drivable space computation and navigation assume the ordered ring-and-column structure of a 360-degree spinning LiDAR and degrade or fail on this data, while learned alternatives are computationally heavy, hard to certify, and trained almost exclusively on spinning-LiDAR data. We demonstrate that the same dense, per-curve geometry is instead an opportunity to close the divide between the industry's preferred sensors and autonomous-driving research. We present GHySSeg, a purely geometric method that segments ground and drivable road from a single hybrid solid-state LiDAR frame by tracing each scan curve and reading two geometric signatures, a step in height and a fold-back in range, with no training and no graphics processing unit. To evaluate it, we release HySoLiD-Drive, the first public benchmark dedicated to ground and road segmentation on an automotive hybrid solid-state LiDAR, comprising 100 manually labeled and 7000 unlabeled frames recorded by two vehicles in real driving. On this benchmark, GHySSeg surpasses both geometric and learned state-of-the-art baselines across ground and road segmentation, reaching an intersection-over-union of 0.907 for road and 0.896 for ground at over 0.96 precision, while running in real time at about 22 milliseconds per frame on a single core.

0.42