CS Paper Radar

GHySSeg: Real-Time Geometric Ground and Road Segmentation for Hybrid Solid-State LiDAR

Martín Palos, Fernando García

cs.RO cs.CV ·submitted 2026-11-16 18:04 UTC · v1
benchmark

Abstract

Hybrid solid-state LiDAR sensors are making their way into production vehicles, yet the data they produce differs structurally from that of the established spinning mechanical sensors behind today's autonomous-driving datasets: it is ring-free, dense, cluttered, and concentrated in a frontal field of view. The classical geometric methods that autonomous vehicles rely on for drivable space computation and navigation assume the ordered ring-and-column structure of a 360-degree spinning LiDAR and degrade or fail on this data, while learned alternatives are computationally heavy, hard to certify, and trained almost exclusively on spinning-LiDAR data. We demonstrate that the same dense, per-curve geometry is instead an opportunity to close the divide between the industry's preferred sensors and autonomous-driving research. We present GHySSeg, a purely geometric method that segments ground and drivable road from a single hybrid solid-state LiDAR frame by tracing each scan curve and reading two geometric signatures, a step in height and a fold-back in range, with no training and no graphics processing unit. To evaluate it, we release HySoLiD-Drive, the first public benchmark dedicated to ground and road segmentation on an automotive hybrid solid-state LiDAR, comprising 100 manually labeled and 7000 unlabeled frames recorded by two vehicles in real driving. On this benchmark, GHySSeg surpasses both geometric and learned state-of-the-art baselines across ground and road segmentation, reaching an intersection-over-union of 0.907 for road and 0.896 for ground at over 0.96 precision, while running in real time at about 22 milliseconds per frame on a single core.

Comment
14 pages, 8 figures, 3 tables. Submitted to IEEE Transactions on Intelligent Transportation Systems. This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessible. HySoLiD-Drive dataset: https://doi.org/10.5281/zenodo.21705196

Closest papers

Nearest neighbours by meaning across the whole index.

Drones as Annotators: Amodal 3D Auto-Labeling for Ground LiDAR with Aerial Priors

eess.IV ·2026-09-06 ·Tianheng Zhu, Zhenhao Wang, Yiheng Feng
similarity 0.66
Abstract

Scaling perception data in autonomous driving is hindered by manual 3D bounding box annotation, a costly and labor intensive process requiring substantial domain expertise. Existing auto-labeling methods reduce this burden, but most of them rely on onboard sensors, where a single ground-level viewpoint yields occluded and sparse observations and inaccurate object geometry. We introduce DAA (Drones as Annotators), a drone-assisted training-free framework for amodal 3D auto-labeling. DAA augments ground LiDAR with an aerial agent that provides less occluded vehicle detections with continuous tracks. Ground LiDAR, in turn, provides precise metric 3D geometry unavailable from aerial imagery alone. DAA exploits the two complementary yet heterogeneous modalities through a two-stage framework: (i) air-ground coordinate alignment unifies aerial detections and ground LiDAR scans into a shared map frame and bootstraps coarse 3D bounding boxes from the aligned aerial detections; (ii) EM-like amodal box refinement alternates between identifying the vehicle's foreground points and updating the coarse box from the identified foreground and aerial priors. We evaluate DAA on an air-ground cooperative perception dataset, where it consistently outperforms existing auto-labeling baselines. LiDAR detectors trained on DAA-generated labels remain competitive with those trained on manual annotations at moderate IoU thresholds. Evaluation against a reference vehicle with known poses and dimensions further confirms its accuracy. We also demonstrate that DAA transfers, without parameter retuning, from onboard to stationary roadside LiDAR and to multi-agent fused point clouds. Code and dataset will be released upon publication.

0.18

Let LiDAR Decide Where to Look: Geometry-Measured Token Selection for Efficient Sparse Latent World Models

cs.CV ·2026-10-29 ·Zeping Zhang, Zhuoya Zhao, Robert Laganière
similarity 0.65
Abstract

Vision-centric autonomous driving models encode thousands of image tokens per frame, yet most depict sky, buildings, or empty road---content irrelevant to planning. Worse, these tokens dilute the planner's attention: we show that randomly discarding 75% of tokens already outperforms the dense model, because the planner can concentrate on the remaining driving-critical content. Building on this finding, we present Geometry-Aware Token Selection (GATS), which uses LiDAR and radar point projections to select a small fraction of image tokens before the vision backbone runs. Because the selector operates on measured 3D geometry rather than visual features, the backbone encodes only the selected patches, cutting end-to-end FLOPs by up to $18\times$. Each kept token receives a 3D anchor from its LiDAR point and is fed to a self-supervised latent world model that predicts future features and 3D displacements without box annotations. At 25% budget, GATS achieves a 3-sec L2 displacement error of 0.520 m on nuScenes and an EPDMS of 88.9 on NAVSIM---surpassing the dense baseline (0.573 m / 85.9) at $6.6\times$ fewer total FLOPs. At an extreme 10% budget (24 GFLOPs, $18\times$ reduction), it still beats the dense baseline on both nuScenes (0.537 m vs. 0.573 m L2) and NAVSIM (87.9 vs. 85.9 EPDMS). On 739 intent-critical scenarios, GATS covers 95.8% of hazardous vehicles and achieves a 0.09% collision rate---73.5% lower than the dense model (0.34%).

0.19

UrbanTwin Sim2Real LiDAR Challenge 2026: Site-Calibrated Synthetic Data and Multi-Detector Fusion for Roadside 3D Detection

cs.CV eess.SP ·2026-11-16 ·Arnav Kumar, Brijesh Soni
similarity 0.64
Abstract

This report summarizes the work submitted by team arnav007 (submission ID 1054222) for the UrbanTwin Sim2Real LiDAR Challenge (V2X-Real track) at the IEEE BigData Cup 2026. The primary objective is to train 3D detectors for vehicles, pedestrians, and trucks using only synthetic roadside LiDAR data, and to generate synthetic scans that are realistic enough to be indistinguishable from real ones. A CARLA based pipeline is developed and calibrated to the fixed sensor site, accurately modeling the range image, including no-return beams, based on unlabelled real development scans. A combined inference detector, using multiple 3D detectors (VoxelNeXt, PV-RCNN, and SECOND) trained exclusively on synthetic data, is also proposed. Each scan is aligned to the synthetic ground plane and processed through the detectors at multiple ground heights. The resulting bounding boxes are fused using bird's-eye view (BEV) clustering, followed by class-specific post-processing to refine heading, box size, and filter low-confidence detections. The final submission achieved a combined score of 0.8947. The ablation study shows that per-scan ground leveling more than doubled the real-scan mAP, while fusing boxes across different heights and models further improved performance.

0.21

SynCalib: Breaking Dataset Shortcuts in LiDAR-Camera Calibration via Extrinsic-Controllable Synthesis

cs.CV cs.RO ·2026-10-20 ·Huihua Zhu, Shuyang Zhang, Dongqing Chen, Zhuo Yu, Jianhao Jiao +4 more
benchmarkcode/data similarity 0.63
Abstract · 8 pages, 6 figures

Online LiDAR-camera calibration remains a fundamental yet challenging task in the field of robotics. Recently, deep learning-based data-driven approaches have emerged, offering high-precision, targetless calibration capabilities. However, existing methods often suffer from a critical dataset shortcut phenomenon due to the lack of extrinsic diversity in their training data. Networks tend to overfit to fixed nominal extrinsic configurations, leading to severe performance degradation and poor generalization in real-world deployments. To address this limitation, we propose a highly generalizable data generation framework tailored for training LiDAR-camera calibration networks. Our framework leverages existing omnidirectional image datasets annotated with depth ground truth to synthesize multi-modal calibration data under rigorous extrinsic constraints. Extensive experiments demonstrate that the data generated by our pipeline significantly enhances the generalization and robustness of typical learning-based calibration networks. Furthermore, we conduct comprehensive real-world evaluations across various camera-LiDAR configurations, validating the zero-shot transfer capability of models trained exclusively on our synthetic data. To facilitate future research and community use, the code for data generation, the pre-trained models, and online benchmark datasets will be made publicly available.

0.25

Autoware in Construction: Gap Analysis and LiDAR Perception Toward Off-Road Autonomous Driving

cs.RO ·2026-10-03 ·Yu Otsuki, Teja Emmey, Sena Matsushita, Akiro Harada, Takeshi Miura
publishedcode/data similarity 0.63
Abstract · 2026 IROS 5th Workshop on Future of Construction, 4 pages, 5 figures

Autoware is an open-source autonomous driving software platform widely adopted by researchers and industry developers. Originally developed primarily for public-road applications, including passenger vehicles, taxis, and buses, Autoware is increasingly being extended to off-road environments such as construction and agricultural sites. Construction sites, however, differ fundamentally from public roads and challenge many assumptions underlying conventional autonomous driving systems. They are characterized by unstructured terrain, airborne dust, continuously evolving site conditions, and construction-specific objects. This paper presents lessons learned from ongoing efforts to extend an Autoware-based autonomous driving system to large dump trucks operating at construction sites. We identify gaps between public-road and off-road construction applications across the sensing, mapping, localization, perception, planning, and control modules of the Autoware stack. We then discuss potential solutions for addressing these gaps, with particular emphasis on ongoing LiDAR-based perception pipeline development and findings from field testing. Finally, we propose a roadmap toward end-to-end autonomous driving for construction vehicles.

0.37

Robust LIDAR Sensor-to-Sensor Domain Generalization via Accumulated-Point Scene Completion

cs.CV ·2026-10-29 ·Christoph B Rist, Larissa T Triess, Markus Enzweiler, Dariu M Gavrila
published similarity 0.63
Abstract · 2026 IEEE Intelligent Vehicles Symposium (IV)

We study domain generalization for LIDAR semantic segmentation. Deep neural networks achieve strong performance on 3D point clouds, yet real-world LIDAR exhibits sensor-specific sampling patterns that hinder transfer across datasets. In many applications, performance on completely unseen sensors is crucial. A model should preferably work on a new setup without prior access to its data or labels. To this end, we introduce a source-only training scheme that adds an occupancy prediction auxiliary objective. We aggregate source-domain scans into a simple world model and use it as the supervision signal, replacing single-scan standard segmentation training. A key property of our approach is that it does not alter the input scan. During training and testing the network consumes the same single-frame LIDAR input, only the supervision signal is enriched via the occupancy objective. At deployment, there is no runtime overhead as the auxiliary head can be dropped for pure segmentation, or kept to obtain scene completion alongside semantic segmentation. In an experimental evaluation across distinct LIDAR datasets, we demonstrate that a model's generalization to new domains can be significantly affected by how it is supervised. In certain setups, performance on unseen domains improves without any explicit domain adaptation (no target scans, no target labels, no sensor priors) and without prediction refinement. At the same time, our method maintains competitive source-domain segmentation performance and incurs no additional inference cost.

0.45

WorkIng: A Real-World and Synthetic Highway Work-Zone Benchmark Dataset for Autonomous Navigation

cs.CV ·2026-10-30 ·Xujun Xie, Dominik Rößle, Adithya Mohan, Daniel Cremers, Torsten Schön
publishedbenchmarkcode/data similarity 0.63
Abstract · Accepted to WACV 2027. 19 pages including supplementary material. (c) 2027 IEEE. Personal use of this material is permitted

Highway work zones are critical edge cases for autonomous vehicles (AVs), combining atypical geometries and jurisdiction-specific regulations that existing benchmarks fail to capture: real-world datasets lack 360° multi-modal, full-scene 3D work zone annotation, and no single recorded site can span the layouts and regulatory variants needed for generalizable models. We present WorkIng, a dual-domain benchmark and training resource. WorkIng-Highway provides a 360° multi-modal work zone benchmark with synchronized 128-channel LiDAR, six RGB cameras, and RTK-GPS across 32 km, yielding 12,000+ annotated frames and 227,399 tracked 3D bounding boxes. WorkIng-CARLA complements this with procedural simulation spanning 24 regulation-aware scenarios across six canonical topologies and six international traffic standards, populated by 100+ custom 3D assets. Benchmarking representative 3D detection and end-to-end planning architectures shows that real-world data remains the primary performance driver, and that scenario-stratified synthetic augmentation improves architectures across 2D recognition, 3D detection, and trajectory planning. Resources: https://github.com/cvims/WorkIng

0.42

HiPFuse: Real-Time LiDAR Semantic Segmentation for Robotic Perception on Edge Devices

cs.CV cs.RO ·2026-11-10 ·Haiyang Wu, George Vosselman, Ville Lehtola
code/data similarity 0.63
Abstract · 13 pages, 6 figures

Real-time robotic perception requires accurate LiDAR semantics under limited resources. Bird's-eye-view (BEV) aggregation is efficient but can mix differently labeled surfaces in columns. We present HiPFuse, a point-BEV fusion framework that exchanges point and height-partitioned BEV features across horizontal scales, combining point-wise detail with 2D spatial context from one LiDAR scan. Fixed height assignments preserve separate vertical aggregation groups, with auxiliary supervision of initial BEV features using targets from the same 3D cells. A dual-scale BEV context module adds broader context from a coarser grid. On SemanticKITTI and MCD, HiPFuse achieves 63.7% and 62.5% mIoU at 14.2 and 22.4 FPS on Jetson AGX Orin, respectively, exceeding the 10 Hz scan rate. Separate training and evaluation show indoor applicability. Replacing only the baseline semantic front end with HiPFuse in fixed robotic systems reduces odometry absolute trajectory error RMSE by 10.6% on average across two outdoor sequences and increases accepted-loop recall by 8.7 percentage points on SemanticKITTI. Qualitative semantic maps show more continuous road labeling. Our code is available at https://github.com/haiyang2022/HiPFuse.

0.35