CS Paper Radar

HiPFuse: Real-Time LiDAR Semantic Segmentation for Robotic Perception on Edge Devices

Haiyang Wu, George Vosselman, Ville Lehtola

cs.CV cs.RO ·submitted 2026-11-10 12:57 UTC · v1
code/data

Abstract

Real-time robotic perception requires accurate LiDAR semantics under limited resources. Bird's-eye-view (BEV) aggregation is efficient but can mix differently labeled surfaces in columns. We present HiPFuse, a point-BEV fusion framework that exchanges point and height-partitioned BEV features across horizontal scales, combining point-wise detail with 2D spatial context from one LiDAR scan. Fixed height assignments preserve separate vertical aggregation groups, with auxiliary supervision of initial BEV features using targets from the same 3D cells. A dual-scale BEV context module adds broader context from a coarser grid. On SemanticKITTI and MCD, HiPFuse achieves 63.7% and 62.5% mIoU at 14.2 and 22.4 FPS on Jetson AGX Orin, respectively, exceeding the 10 Hz scan rate. Separate training and evaluation show indoor applicability. Replacing only the baseline semantic front end with HiPFuse in fixed robotic systems reduces odometry absolute trajectory error RMSE by 10.6% on average across two outdoor sequences and increases accepted-loop recall by 8.7 percentage points on SemanticKITTI. Qualitative semantic maps show more continuous road labeling. Our code is available at https://github.com/haiyang2022/HiPFuse.

Comment
13 pages, 6 figures

Closest papers

Nearest neighbours by meaning across the whole index.

IndoorBEV: A Lightweight Real-Time LiDAR BEV Perception System for Indoor Mobile Robots

cs.RO ·2026-09-30 ·Haichuan Li
code/data similarity 0.82
Abstract

Efficient indoor LiDAR perception is challenging because mobile robots must understand cluttered three-dimensional environments under strict latency and memory constraints. Existing point-based and voxel-based methods often incur substantial computational overhead, whereas conventional bird's-eye-view (BEV) representations improve efficiency at the cost of discarding vertical geometric information. We present IndoorBEV, a lightweight LiDAR perception framework that mitigates this tradeoff through a height-aware BEV representation and geometry-conditioned feature fusion. IndoorBEV summarizes the vertical point distribution in each BEV cell using statistical height features and multi-frequency height encoding, allowing informative three-dimensional cues to be processed efficiently by two-dimensional convolutions. A lightweight encoder then integrates complementary geometric features with multi-scale local representations and compact global scene context. Decoupled dense prediction heads jointly produce semantic BEV maps and oriented object bounding boxes. IndoorBEV contains only 0.6M parameters and requires 2.3 MB of model storage. On an NVIDIA AGX Orin, it uses 21.52 MB of GPU memory per inference and achieves a mean latency of 169.6 ms under a 200 ms perception deadline, with a deadline miss ratio of 1.8\%. Evaluations on simulated scenes, real-world robot scans, and an open-source indoor point-cloud dataset demonstrate a favorable tradeoff among perception accuracy, latency, and memory consumption. These results indicate that explicitly encoding vertical geometry within a compact BEV representation provides an effective approach to resource-efficient indoor LiDAR perception.

0.24

CLFTv2: Efficient Camera-LiDAR Fusion for Semantic Segmentation via Hierarchical Feature Pyramids

cs.CV cs.RO ·2026-09-09 ·Toomas Tahves, Mauro Bellone, Raivo Sell
code/data similarity 0.74
Abstract

Semantic segmentation for autonomous driving requires reliable detection of vulnerable road users (VRUs) despite heavy class imbalance. We introduce CLFTv2, a hierarchical camera-LiDAR fusion framework replacing global ViT attention with a Swin-based multi-scale encoder and a lightweight FPN-style residual decoder. Operating in the 2D perspective domain, CLFTv2 integrates multi-scale geometric cues through shifted-window attention and per-scale residual fusion, avoiding the computational overhead of query-matching decoders. Across three driving datasets, CLFTv2 consistently improves VRU recall. On ZOD, CLFTv2-Large achieves 53.5\% mIoU, improving pedestrian IoU from 35.5\% to 44.9\% over the prior CLFT model. On Waymo, CLFTv2 reaches 61.7\% mIoU. Additionally, a modality-isolation study suggests ViT's global receptive field yields stronger fusion gains only under dense LiDAR returns. Compared to a Swin-based Mask2Former adaptation, CLFTv2 requires 1.4$\times$ fewer GFLOPs and delivers 2.2$\times$ higher throughput, while achieving comparable overall accuracy. These results demonstrate that hierarchical local-attention fusion offers an efficient, scalable alternative to global-attention and query-based decoders for real-time on-vehicle perception in intelligent transportation systems. Source code is publicly available.

0.33

RAHF-Net: Range-Aware Heterogeneous Fusion for LiDAR-Assisted RGB Semantic Segmentation

cs.CV ·2026-10-18 ·R. D. Lin, Pengcheng Weng, Ge Wang, Han Ding, Fei Wang
similarity 0.73
Abstract

This paper studies LiDAR-assisted RGB semantic segmentation, where LiDAR point-cloud features improve dense pixel-wise predictions in the RGB image plane rather than 3D point labels or detections. Existing 2D fusion methods often project point clouds into shallow depth/range maps and apply spatially uniform fusion, discarding rich 3D structure and ignoring the range-dependent reliability of outdoor LiDAR. We propose RAHF-Net, a Range-Aware Heterogeneous Fusion Network. Its Cylindrical-to-Perspective (C2P) module projects pretrained cylindrical voxel features into the image plane, preserving structured 3D semantic priors. A Range-Aware Heterogeneous Fusion (RAHF) module then uses a soft depth-derived range mask to perform LiDAR-guided geometric enhancement in reliable near-field regions and visual-context enhancement in sparse far-field regions. On KITTI-360, RAHF-Net achieves 65.76 mIoU, outperforming representative RGB-only and RGB-LiDAR baselines, including CMX by 1.45 points. Experiments on DELIVER further demonstrate improved robustness under adverse weather, illumination degradation, and sensor corruption.

0.19

Toward Robust LiDAR Semantic Segmentation for Real-World Deployment: Evaluation under Coarse Labels, Adverse Conditions, and Domain Shifts

cs.RO ·2026-09-02 ·Samir Abou Haidar, Alexandre Chariot, Mehdi Darouich, Cyril Joly, Jean-Emmanuel Deschaud
benchmark similarity 0.73
Abstract

LiDAR-based semantic segmentation is a core perception module for autonomous vehicles and mobile robots. Despite the strong performance of recent state-of-the-art methods on standard benchmarks, existing evaluation protocols remain focused on clean, single-domain settings and fine-grained label taxonomies, leaving deployment readiness largely unassessed. Real-world systems must handle safety-critical label semantics, degraded sensing conditions, and cross-domain variability, yet no unified protocol currently addresses all three aspects together. In this paper, we propose a structured evaluation protocol that assesses the deployment readiness of LiDAR semantic segmentation models along three complementary dimensions: (i) coarse-label evaluation aligned with autonomous driving safety priorities, revealing how label granularity affects different methods; (ii) robustness under eight types of LiDAR corruptions designed to emulate real-world atmospheric, geometric, and sensor degradations; and (iii) domain generalization across datasets without adaptation. The evaluation includes inference speed measured on an embedded Jetson AGX Orin platform, directly reflecting deployment constraints. Our results show that fine-grained benchmark rankings do not always reflect safety-relevant performance, that all methods experience substantial degradation under corruptions with architecture-dependent robustness characteristics, and that current domain generalization remains insufficient for reliable deployment. These findings expose concrete gaps between benchmark performance and deployment readiness, and provide a reference protocol for more practically grounded evaluation of LiDAR semantic segmentation.

0.07

RaSFNet: Ray-aligned and Scan-aware Fusion Network for LiDAR Semantic Segmentation

cs.CV cs.LG ·2026-10-22 ·Chuang Chen
similarity 0.73
Abstract

LiDAR point cloud semantic segmentation is a fundamental component of 3D perception for autonomous driving and robotics. Projection-based methods map 3D point clouds into 2D representations for feature extraction using 2D networks. However, aggregating multiple points during projection can obscure geometric differences within each frustum, while local feature extraction limits the modeling of spatial relationships across scanning regions. Moreover, proximity in the projected representation does not necessarily imply proximity in 3D space, and interactions between point and projected features may mix features from different ranges, reducing semantic discriminability. To address these challenges, we propose the Ray-aligned and Scan-aware Fusion Network (RaSFNet), which incorporates point cloud geometry and LiDAR scanning characteristics into projection-based semantic segmentation. Specifically, the Ray-Aligned Geometric Distribution Encoding (RAGDE) module characterizes point distributions within each frustum using a ray-aligned coordinate system. To model spatial context, a Scan-Topology-Aware Mamba (STAM) block organizes frustum features according to the LiDAR azimuth sampling pattern and captures long-range dependencies across scanning regions. In addition, a Range-Constrained Point-Frustum Fusion (RCPFF) mechanism uses shared range information to guide feature exchange between point and frustum representations while maintaining spatial correspondence. RaSFNet achieves mIoU scores of 70.2% and 77.7% on the SemanticKITTI and nuScenes validation sets, respectively, indicating competitive segmentation performance compared with the evaluated methods.

0.12

MVSTF: Multi-View Spatio-Temporal Fusion for LiDAR-Based Moving Object Segmentation

cs.CV cs.RO ·2026-11-16 ·Jiaoju Zhou, Chao Ye, Xuebo Yang, Weiyang Lin
code/data similarity 0.72
Abstract

Autonomous mobile robots confront significant chal lenges in recognizing the motion properties of objects in dy namic environments. However, existing methods are hindered by limitations such as boundary ambiguity, occlusion, viewpoint constraints, and training complexity. In this paper, we propose an innovative end-to-end Multi-View Spatio-Temporal Fusion network, named MVSTF, which utilizes sequential point clouds to generate multi-view images and feature differences, and designs a multi-branch network to extract spatio-temporal and dimen sional features in parallel, and realizes high-precision moving object segmentation. First, sequential point clouds are utilized to generate multi-view images and feature differences. Then, an end-to-end multi-branch network including Dual Down-sampling Blocks (DDB), Spatial Attention Blocks (SAB), Multi-Kernel Convolutional Neural Network blocks (MKCNN), Dual Feature Fusion Blocks (DFFB), and the Point Fusion (PF) module, is designed to extract motion features from feature differences and geometric and semantic features from multi-view images. Finally, an auxiliary semantic head is introduced to further improve the algorithm's robustness and the model's interpretability. This work is validated on the SemanticKITTI and KITTI-Road bench marks, achieving state-of-the-art results on the SemanticKITTI MOS validation set and the KITTI-Road validation set, and competitive results on the hidden SemanticKITTI-MOS test set. The code is available at https://github.com/ZhouJJ111/MVSTF.

0.32

Lightweight and Resource-Efficient Perception for Robotic Guide Dogs

cs.DC cs.CV ·2026-10-02 ·Jinse Kwon, Yoojin Lim, Choonghan Lee, Yongseung Yu, Yongin Kwon +1 more
publishedbenchmark similarity 0.71
Abstract · accepted in ACCV 2026

Robotic guide dogs should understand their surroundings, objects, and potential risks. Prior research has focused on raw sensor data from cameras and 2D or 3D LiDAR, which precisely measure distance points rather than provide a semantic understanding of the scene. While these physical measurements are effective for robot-centric collision avoidance and robot safety, they are not suitable for human-centric guidance. The system should recognize the type and relevance of obstacles and explain them, clearly and actionably, in terms of their spatial relation to the user. We present complete on-device perception modules that fuse a 360 camera and a 2D LiDAR for reliable collision avoidance, with moving-object detection and tracking for human-centric guidance. Finally, in walking-impossible situations, a vision--language model delivers pathway explanations as a safety mechanism to reduce user anxiety. In experiments, verification of fused 360 camera--LiDAR depth shows reliable near-range perception but inherent mid-range bias, while the system as a whole sustained real-time performance under 55 W. On the real-world egocentric GuideDogQA benchmark, our system achieved 83.8\% accuracy, compared with 67.1\% for GPT-4o. These results demonstrate that practical human-centric guidance with real-time on-device inference is feasible even on quadrupeds.

0.21

FastBEVFusion: Simple Multi-Modal Fusion for 3D Object Detection at 50 FPS

cs.CV cs.RO ·2026-10-27 ·Tom Sanitz, Emre Gülsoylu, Simone Frintrop, Christian Wilms
published similarity 0.70
Abstract · Accepted at Iberian Robotics Conference (ROBOT2026)

Reliable real-time 3D object detection based on LiDAR and camera data is critical for safety in autonomous driving, where systems must accurately perceive their surroundings with minimal latency. Many state-of-the-art systems achieve high-quality detection results but fail to meet real-time constraints, limiting their practical use. To address this challenge, we propose FastBEVFusion, a simple, fast, and robust fusion system for 3D object detection. Based on modality-specific features, FastBEVFusion projects these features into semi-aligned modality-specific BEV spaces, without relying on a computationally intensive and potentially error-prone depth estimation. Given these BEV spaces, we propose a light-weight, soft, and dynamic fusion module based on cross-attention, which adapts dynamically to the scene context and enables feature fusion across the entire BEV spaces. Experiments on the complex nuScenes dataset show that FastBEVFusion outperforms state-of-the-art real-time systems, and achieves over 50 FPS without deployment libraries. Additionally, our system shows strong robustness to calibration errors, making FastBEVFusion a powerful 3D object detection system for real-world applications.

0.28