CS Paper Radar

Lightweight and Resource-Efficient Perception for Robotic Guide Dogs

Jinse Kwon, Yoojin Lim, Choonghan Lee, Yongseung Yu, Yongin Kwon, Jemin Lee

cs.DC cs.CV ·submitted 2026-10-02 12:01 UTC · v2
publishedbenchmark

Abstract

Robotic guide dogs should understand their surroundings, objects, and potential risks. Prior research has focused on raw sensor data from cameras and 2D or 3D LiDAR, which precisely measure distance points rather than provide a semantic understanding of the scene. While these physical measurements are effective for robot-centric collision avoidance and robot safety, they are not suitable for human-centric guidance. The system should recognize the type and relevance of obstacles and explain them, clearly and actionably, in terms of their spatial relation to the user. We present complete on-device perception modules that fuse a 360 camera and a 2D LiDAR for reliable collision avoidance, with moving-object detection and tracking for human-centric guidance. Finally, in walking-impossible situations, a vision--language model delivers pathway explanations as a safety mechanism to reduce user anxiety. In experiments, verification of fused 360 camera--LiDAR depth shows reliable near-range perception but inherent mid-range bias, while the system as a whole sustained real-time performance under 55 W. On the real-world egocentric GuideDogQA benchmark, our system achieved 83.8\% accuracy, compared with 67.1\% for GPT-4o. These results demonstrate that practical human-centric guidance with real-time on-device inference is feasible even on quadrupeds.

Comment
accepted in ACCV 2026

Closest papers

Nearest neighbours by meaning across the whole index.

Depth-Aware Path Planning and Collision Avoidance for Robotic Nursing Assistants Using Real-Time 3D Vision

cs.RO ·2026-11-14 ·Peeyush Thakur, Dharmendra Sharma, Archit Sharma, Sandeep Gupta, Anuj Nandanwar +1 more
similarity 0.74
Abstract · 12 pages, 14 figures

This paper presents a depth-aware path planning and collision avoidance framework for the safe navigation of robotic nursing assistants in cluttered environments with low-height obstacles. Conventional LiDAR-based navigation systems, while accurate for mapping and localization, fail to detect transparent or low-height obstacles, whereas vision-based systems are prone to noise and occlusion. The proposed framework integrates RGB-D depth sensing, rule-based obstacle avoidance, and the NavfnROS global path planner to drive the robot from an initial point to a goal point. The proposed approach is implemented on the Husky A200 robot, equipped with a Kinova Gen3 arm, to form a complete setup for a robotic nursing assistant. This system features a multi-layer architecture for global planning, perception fusion, and real-time control in the ROS-Gazebo environment. Experimental evaluations in a simulated cluttered environment demonstrate up to 40\% higher success rate and 35\% improvement in minimum clearance compared with single-sensor baselines. Furthermore, real-world experimental results validate the proposed approach as a computationally efficient and safety-aware navigation solution for autonomous healthcare robots.

0.31

HiPFuse: Real-Time LiDAR Semantic Segmentation for Robotic Perception on Edge Devices

cs.CV cs.RO ·2026-11-10 ·Haiyang Wu, George Vosselman, Ville Lehtola
code/data similarity 0.71
Abstract · 13 pages, 6 figures

Real-time robotic perception requires accurate LiDAR semantics under limited resources. Bird's-eye-view (BEV) aggregation is efficient but can mix differently labeled surfaces in columns. We present HiPFuse, a point-BEV fusion framework that exchanges point and height-partitioned BEV features across horizontal scales, combining point-wise detail with 2D spatial context from one LiDAR scan. Fixed height assignments preserve separate vertical aggregation groups, with auxiliary supervision of initial BEV features using targets from the same 3D cells. A dual-scale BEV context module adds broader context from a coarser grid. On SemanticKITTI and MCD, HiPFuse achieves 63.7% and 62.5% mIoU at 14.2 and 22.4 FPS on Jetson AGX Orin, respectively, exceeding the 10 Hz scan rate. Separate training and evaluation show indoor applicability. Replacing only the baseline semantic front end with HiPFuse in fixed robotic systems reduces odometry absolute trajectory error RMSE by 10.6% on average across two outdoor sequences and increases accepted-loop recall by 8.7 percentage points on SemanticKITTI. Qualitative semantic maps show more continuous road labeling. Our code is available at https://github.com/haiyang2022/HiPFuse.

0.35

Towards Path-Creative Navigation: Robot Navigation through Embodied Interaction

cs.RO ·2026-10-08 ·Haoyu Xi, Siwei Cheng, Xiangyuan Liu, Brenda Li, Wei Zhang
similarity 0.71
Abstract

Autonomous navigation in cluttered and constrained environments typically assumes a fixed environment and searches only for paths within existing free space. However, a route can be blocked by an articulated structure, a movable object, or a pedestrian, and reaching the goal may therefore require appropriate embodied interaction with the environment. This paper formulates Path-Creative Navigation (PCN), a navigation paradigm in which the robot recovers free space by coordinating locomotion and embodied interaction, and addresses one class of PCN tasks with a mapless framework. The vision-LiDAR-odometry framework integrates local observations, obstacle geometry, and robot-state estimates through a unified navigation system, providing stable semantic and geometric information for navigation and interaction. The traversability-aware decision method utilizes visual and LiDAR distance information to determine whether a blockage is actionable and whether it can be safely bypassed, enabling the robot to interact only when necessary while supporting articulated structure pushing, movable object pushing, obstacle avoidance, and pedestrian requests. We design simulation scenarios and evaluate different methods in both simulation and two real-world tasks that cannot be completed by conventional navigation alone without embodied interaction. These results demonstrate that our framework achieves higher task completion than the baseline methods by coordinating navigation and interaction in cluttered and constrained environments.

0.17

DCLP++: Learning to Navigate with Footprint Clearance and Relative Motion

cs.RO ·2026-09-08 ·Shanze Wang, Wei Zhang
hot direction similarity 0.70
Abstract · 5 pages

We present DCLP++, a local navigation frameworkthat uses footprint clearance as the geometric basis for studying relative motion features in dynamic environments. Each valid LiDAR return is mapped to its shortest Euclidean distance from the filled robot footprint before reciprocal encoding, replacing distance from the sensor with distance to the occupied body. Radial measurementsor simulated planar relative velocities provide short-horizon features without static-dynamic labels in the policy input. A preliminary study uses a rectangular robot with a speed limit of 1 m/s among 20 moving obstacles. On 100 fixed validation tasks, two selected training seeds yield mean success rates of 42% with sensor rangeand 70% with footprint clearance after 200,000 environment steps.Motion variants show mixed additional gains. These results supportthe clearance-based observation in the evaluated setting; reliable motion benefits and transfer across robots require further evaluation.

0.52

BEV-Diffusion: Camera-Only Traversability Navigation with BEV Memory and Efficient Cross-Robot Adaptation

cs.RO ·2026-11-18 ·Iana Zhura, Timofei Kozlov, Dmitrii Plotnikov, Ivan Valuev, Miguel Altamirano Cabrera +1 more
similarity 0.70
Abstract

Robot navigation requires both an understanding of the scene and an efficient adaptation to new robots, yet current methods rely on expensive LiDAR sensors, long mapping and modular pipelines. We present BEV-Diffusion, a camera-only model that learns a bird's-eye view (BEV) traversability map, its uncertainty and the path in a single network. A frozen DINOv2 backbone encodes consecutive RGB frames, which inverse perspective mapping and Bayesian fusion lift into the BEV, and a ranking loss keeps outdoor traversability graded rather than binary, separating asphalt from grass (median 0.94 vs. 0.75). On this map, a transformer denoiser generates polar waypoints in a few DDIM steps, and uncertainty-aware guidance refines the path and ends it where the map is no longer reliable. At deployment, a metric BEV memory keeps obstacles after they leave the camera view and warm starts each sample from the previous, ego-motion compensated path. Because the planner jointly learns the path, the map, and its uncertainty, it selects routes through terrain it can confidently traverse. In an unseen courtyard, a wheeled-legged robot autonomously traveled 120 m, completing 96% of the route without intervention, compared with 75-88% for the baselines. Even under low-light conditions after sunset, the proposed model completed the route without requiring any intervention. Retraining only the BEV head, about 3% of the parameters, adapts the model to a small legged robot in 2.3 min. Indoors, the memory gets this robot out of maze-like traps: it retains 62-66% of the nearby out-of-view obstacles, against at most 3% for the baselines, and the robot achieves 67-100% task progress, compared with 20-40% for the evaluated baselines.

0.25

Safe Multi-Robot Coordination via VLM-LLM Reasoning and Reachability Analysis

cs.RO cs.AIeess.SY ·2026-08-18 ·Mohamed Dwedar, Ahmad Hafez, Alexander Jesser, Amr Alanwar
published similarity 0.69
Abstract

Safe coordination in heterogeneous machine-to-machine (M2M) robotic systems is challenging when robots differ in sensing capabilities, environmental awareness, and motion execution roles. This paper presents a centralized safety-aware M2M framework for cooperative goal-directed navigation in a heterogeneous mobile robot team comprising a vision-capable quadruped and a camera-less robotic vehicle. The objective is to guide both platforms toward a goal region while avoiding static and dynamic obstacles and preventing unsafe inter-robot interactions. Under the principle of shared perception, the vision-capable robot provides semantic environmental awareness through a centralized server over an MQTT broker, enabling the camera-less platform to navigate using this shared scene representation alongside its own odometry, IMU, and state feedback. A vision-language model (VLM) interprets the visual stream, and the extracted semantic data is mapped into conservative metric geometric constraints, including inflated obstacle sets, safe corridors, and goal regions. A large language model (LLM) proposes high-level task allocations, while physical command authority is restricted to a robot-specific zonotope reachability gate. This verification engine propagates independent reachable tubes to evaluate obstacle avoidance, safe-corridor containment, and inter-robot separation predicates before approving commands. Online experiments across clear-path and dynamic-obstacle scenarios show that the pipeline reliably approves safe motion, triggers conservative replanning or holding maneuvers upon constraint violation, and enforces a strict architectural separation between advisory semantic reasoning and formally verified motor execution.

0.30

CRA: Continuous Risk Assessment for Safety-critical Visual Navigation

cs.RO cs.CVeess.SY ·2026-11-17 ·Lihao Zheng, Ying Wu, Chen Jiang, Randy Freeman
code/data similarity 0.69
Abstract · Project page: https://isaac-restaurant-cra.cra-demos.workers.dev

Traditional safety-critical control methods often rely on predefined constraints that separate states into safe and unsafe regions. While recent studies have extended geometric safety toward semantic safety, real-world safety is rarely purely binary. The risk associated with an object or human can vary continuously with its physical properties, like motion, and interaction context; for example, a person carrying a heavy object or a hot object moving at high speed may require a different safety response from an ordinary static obstacle. In this paper, we propose a vision-based continuous risk assessment framework for safety-critical visual navigation. Our method uses RGB and LiDAR observations to estimate four risk factors (kinetic, potential, contact-severity, and thermal) and combines them into a continuous risk score for each assessed object or person. These estimates are integrated into a Poisson safety function with a Laplace guidance field as a safety filter, enabling online monitoring and intervention in open-world robot navigation. We demonstrate the proposed method in a simulated restaurant scene.

0.31

TriSAR-3D and PaintFusion: A Novel Trimodal LiDAR-RGB-Thermal Dataset and Method for 3D Person Detection in Search and Rescue

cs.CV cs.RO ·2026-10-15 ·Markus Kramer, Jan Wachenfeld, Oskar von Stryk
code/data similarity 0.68
Abstract

Reliable 3D person detection is important for rescue robotics to give first responders situational awareness. Yet most multimodal 3D detection research targets automotive scenarios in which pedestrians mostly appear in a narrow range of upright, near-road poses. It is therefore unclear how much of the reported performance transfers to rescue settings, as a person may be lying, partially occluded, or in unstructured indoor and outdoor environments. To investigate this gap, we introduce TriSAR-3D, a multimodal person detection dataset recorded with a high-resolution 128-channel LiDAR, an RGB camera, and a thermal camera. It captures varied poses in indoor as well as outdoor locations at different times of day to study their influence on 3D object detector performance. Furthermore, we propose a novel trimodal 3D detection pipeline, PaintFusion, that fuses PointPainting-based evidence using a simple MLP. We show that the derived method reaches 65.4 AP@50 and thereby outperforms strong LiDAR-only (CenterPoint, 53.4), RGB+LiDAR (BEVFusion, 60.5), and adapted trimodal (Tri-BEVFusion, 60.7) baselines on the dataset. At the same time, it is substantially faster than other fusion-based methods such as BEVFusion, with a per-frame latency of 51.6 ms compared to 101 ms. Additionally, we test how the performance of different 3D object detectors generalizes to unseen pose categories. Removing lying instances from training data collapses the lying-pose AP@50 to near zero across all evaluated detectors. The results indicate that dataset diversity exerts a large effect on 3D object detection performance. The dataset and code are available at https://github.com/MarkusKramer1/3D-Trimodal-People-Detection.

0.23