CS Paper Radar

BEV-Diffusion: Camera-Only Traversability Navigation with BEV Memory and Efficient Cross-Robot Adaptation

Iana Zhura, Timofei Kozlov, Dmitrii Plotnikov, Ivan Valuev, Miguel Altamirano Cabrera, Dzmitry Tsetserukou

cs.RO ·submitted 2026-11-18 09:58 UTC · v1

Abstract

Robot navigation requires both an understanding of the scene and an efficient adaptation to new robots, yet current methods rely on expensive LiDAR sensors, long mapping and modular pipelines. We present BEV-Diffusion, a camera-only model that learns a bird's-eye view (BEV) traversability map, its uncertainty and the path in a single network. A frozen DINOv2 backbone encodes consecutive RGB frames, which inverse perspective mapping and Bayesian fusion lift into the BEV, and a ranking loss keeps outdoor traversability graded rather than binary, separating asphalt from grass (median 0.94 vs. 0.75). On this map, a transformer denoiser generates polar waypoints in a few DDIM steps, and uncertainty-aware guidance refines the path and ends it where the map is no longer reliable. At deployment, a metric BEV memory keeps obstacles after they leave the camera view and warm starts each sample from the previous, ego-motion compensated path. Because the planner jointly learns the path, the map, and its uncertainty, it selects routes through terrain it can confidently traverse. In an unseen courtyard, a wheeled-legged robot autonomously traveled 120 m, completing 96% of the route without intervention, compared with 75-88% for the baselines. Even under low-light conditions after sunset, the proposed model completed the route without requiring any intervention. Retraining only the BEV head, about 3% of the parameters, adapts the model to a small legged robot in 2.3 min. Indoors, the memory gets this robot out of maze-like traps: it retains 62-66% of the nearby out-of-view obstacles, against at most 3% for the baselines, and the robot achieves 67-100% task progress, compared with 20-40% for the evaluated baselines.

Closest papers

Nearest neighbours by meaning across the whole index.

TravSUITE: Traversability via Self-Supervised, Uncertainty-Aware IRL and Terrain Estimation

cs.RO ·2026-10-23 ·Samuel Triest, Amirreza Shaban, David D. Fan, Wenshan Wang, Sebastian Scherer
publishedhighly cited similarity 0.77
Abstract

Traversability analysis in off-road settings remains a fundamental challenge for mobile robots. Key difficulties include constructing an accurate and expressive local map from multimodal sensor data, and using the map to design traversability rules that yield desirable navigation behavior. Importantly, this system must be resilient to the limited sensing regime brought about by complex environments and high speeds. In this paper, we present TravSUITE, a traversability system suitable for high-speed navigation in off-road environments. TravSUITE consists of two major components: 1) an efficient voxel mapper that leverages visual foundation models (VFMs) to build a rich geometric-semantic local map from streams of on-board sensor data, and 2) a unified neural network that jointly predicts traversability-relevant quantities in bird's eye view (BEV), including geometry, semantics, speed and cost. Our training strategy is entirely annotation-free and self-supervised, leveraging tasks such as map inpainting and inverse reinforcement learning (IRL) to learn both map representations and traversability. We perform a thorough ablation study and comparison to state-of-the-art approaches, and the results indicate that cost learning and auxiliary inpainting each contribute significantly to planning quality, and their combination is critical for achieving state-of-the-art performance in off-road path planning. We also design a simple risk adaptation mechanism to leverage our method's uncertainty estimates at deploy-time, and demonstrate that a combination of inpainting and risk estimation can result in 80% fewer navigation errors and 5% faster autonomous traversal speeds in real-world hardware experiments.

0.49

FLINT: Fast Lightweight Inference for Traversability

cs.RO cs.AI ·2026-09-22 ·William Bonilla, Maxime Boisvert, David-Alexandre Poissant, David Meger, Louis Petit
similarity 0.73
Abstract · 8 pages, 5 figures

Navigation in off-road conditions is challenging due to the lack of structure. There is no fixed vocabulary for what is traversable. The traversability depends on both the environment and the embodiment's dynamics. Neither of these two variables can be hand-labeled at scale. Thus, traversability has to be learned by the embodiment's own experience. Modern platforms tend to use multiple sensors to estimate traversability and navigate: RGBD cameras, lidar, radar, IMU, with computationally intensive platforms to run inference on neural networks. Against this trend, we propose FLINT, a lightweight traversability estimator: a 21.6M-parameter backbone, 38\times smaller than a comparable foundation-model backbone, that scores higher on held-out terrain probes and runs at 14.7 FPS on CPU alone using a RGB camera has the only sensor. Despite that gap in scale, FLINT produces a cheaper, more accurate costmap than a deployed foundation-model system (WildOS) on 23 of 24 replayed field logs. We compare different self-supervised learning signals and deploy the resulting models on a real platform in closed-loop field trials: the best self-supervised head reaches 99% autonomy over the route, outperforming a human-label-trained baseline deployed live on the same course. Our results show that heavy sensing and computing are not necessary for traversability estimation.

0.32

Learning to Drive on Mars: Visual Multimodal Traversability Estimation for Off-World Navigation

cs.RO ·2026-09-21 ·Darren Chiu, Cole Wilson, Andrei Tumbar, Gaurav S. Sukhatme, Steven Myint
similarity 0.73
Abstract

Autonomous navigation on Mars requires vehicles to distinguish between traversable terrains across diverse and visually challenging environments. However, progress in learning-based navigation for off-world environments has been limited by the lack of large-scale datasets. Since landing in Jezero Crater, the Mars 2020 Perseverance rover has traversed terrain ranging from sandy dunes, rocky patches, and flat bedrocks. As a result, this paper presents a dataset spanning 500 sols and 45km of trajectories driven by both human operators and the onboard planner, ENav. Our dataset contains grayscale stereo image pairs, poses, accelerometer readings, rocker-bogie angles, and estimates of tilt and wheel slip. Building on this dataset, we introduce an uncertainty-aware traversability-estimation framework that learns terrain representations from multimodal driving experience. We compare our proposed method against existing approaches on the Mars 2020 dataset and show that our method achieves an AUROC of 0.874 and an F1 score of 0.758, outperforming the strongest baseline by 0.058 and 0.156, respectively, while also achieving the highest average precision and recall. Finally, we show that the visual representations can be integrated into path planners, such as ENav, on a physical rover test bed. Videos, code, and the M2020 dataset will be available at https://darren-chiu.github.io/learning-to-drive-on-mars.

0.23

PIVOT: Physically Informed Vision-Language Off-Road Traversability for Field Robot Navigation

cs.RO ·2026-09-17 ·Aoran Jiao, Wenda Zhao, Hshmat Sahak, Timothy D. Barfoot
similarity 0.72
Abstract

Terrain assessment is a critical capability for off-road mobile robots, enabling safe and reliable navigation through unstructured and geometrically complex environments. Conventional geometry-based terrain assessment is fast to compute but often overly conservative in unstructured environments. We present PIVOT: a Physically Informed Vision-Language Off-Road Traversability navigation system that augments conventional geometry-based planning with vision-language-model (VLM)-based semantic reasoning for field robots. To physically ground this assessment, we quantify how strongly the VLM's predicted traversal energy cost, robot vibration, and wheel slip correlate with real-world measurements and introduce a unified traversability score that weights each modality by its prediction-measurement correlation. For efficiency, we design a two-level navigation architecture that retains geometry-based planning as the nominal mode and invokes semantic replanning only when that mode fails to find a path. Across five repeated closed-loop trials on a mixed-terrain route totalling around $6.4$ km, the proposed system increases overall autonomy from $59.6\%$ to $97.0\%$, reduces human interventions from $11$ to $3$, and increases the mean distance between interventions (MDBI) from $69.2$ m to $412.9$ m compared with geometry-only navigation. These results demonstrate that physically grounded VLM-based terrain assessment can substantially extend autonomous navigation beyond the limitations of geometry alone, while preserving efficient geometric planning as the nominal mode.

0.21

PathLift: Depth-Conditioned Metric Lifting for Visual-Navigation Priors

cs.RO ·2026-10-12 ·Gwanjun Shin, Hyeongseok Suh, Hongmo Jung, Jongwoo Lim
published similarity 0.71
Abstract · 9 pages of main text, accepted to CoRL 2026

Generalist visual-navigation policies tell a robot which direction to go but not how far. A separate lifting step is needed at deployment to convert their unitless trajectory into a metric path that a controller can track; existing scalar lifters apply uniform scaling that misses per-waypoint corrections, while in-policy approaches that inject monocular depth into the policy inherit the prediction errors of the depth model near obstacles and at close range. We present PathLift, a per-waypoint depth-conditioned adapter that lifts a pre-trained visual-navigation policy by consuming an explicit, sensor-grade depth source (RGB-D, stereo, or projected LiDAR) and fitting per-waypoint magnitude and lateral residuals to a canonicalized prior. PathLift consistently improves closed-loop navigation across diverse visual-navigation policies in simulation and on a real wheeled robot under both stereo and LiDAR depth. By turning the policy's unitless intent into a depth-feasible metric path in a single feed-forward pass, the adapter lifts real-world success without test-time optimization.

0.29

EchoNav: Evidential BEV Completion from Historical Observations for Visual Navigation

cs.RO ·2026-10-20 ·Diwen Liu, Yiyang Shao, Borui Wang, Chi Zhang, Jizhuo Chen +4 more
similarity 0.71
Abstract · 9 pages, 6 figures

Visual navigation in cluttered environments requires robots to recover previously observed structure and infer obstacles and free space that remain occluded. We present a framework that combines temporal aggregation and occupancy completion in an evidential bird's-eye-view (BEV) representation predicted from short RGB sequences. A decoder adapts frozen VGGT-Omega features and combines historical residual proposals using cellwise weights and a learned no-update option. The BEV predictor produces a local map in the latest ego frame without depth or camera-pose inputs or explicit geometric warping. The evidential model treats observed free space separately and predicts occupancy with associated confidence across the remaining supported region. We train the predictor on simulated RGB sequences paired with complete and visibility-masked occupancy annotations. Our experiments evaluate navigation in simulation and on a wheeled robot, with additional demonstrations on quadruped and humanoid robots. In simulated sequential two-goal navigation, our system achieves 86.3% success, outperforming the strongest evaluated baseline by 32.2 percentage points. Across 60 wheeled-robot trials in 20 scenes, it achieves 73.3% success, compared with 33.3% for the strongest evaluated baseline.

0.13

ReVNM: Learning-Based Visual Navigation from a Remote Camera

cs.RO ·2026-09-24 ·Michikuni Eguchi, Kohei Honda, Masafumi Endo, Yasuhiro Yoshimura, Ryo Yonetani
similarity 0.71
Abstract · Submitted to IEEE ICRA 2027

Visual Navigation Models (VNMs) enable robots to navigate from egocentric visual observations without geometric localization and planning, but long-range navigation still requires pre-built maps. This paper presents the Remote Visual Navigation Model (ReVNM), which uses a single remote surveillance camera to serve as both an observation source and an implicit environmental map for visual navigation. While the use of remote cameras could eliminate the need for pre-built maps as well as onboard vision processing, their limited field of view instead of egocentric observations makes it hard to achieve collision-free navigation. The lack of existing data with diverse remote viewpoints, which are crucial for training robust VNMs, further complicates the challenge. In this work, we propose a learning-by-synthesis approach to address this two-fold challenge. Our ReVNM extends a state-of-the-art VNM architecture with an exocentric-to-egocentric (exo2ego) module that predicts an egocentric depth observation from remote-camera observations. This helps the VNM to plan a path while considering obstacles in front of the robot. Trained only on randomly generated worlds with diverse obstacle layouts and camera viewpoints, ReVNM can generalize well to real robot navigation without additional fine-tuning. Experiments in both simulation and real-world environments confirmed the effectiveness of the proposed approach.

0.19

BEVCast: Path-Adaptive BEV for Efficient End-to-End Autonomous Driving

cs.CV cs.RO ·2026-11-05 ·Qiren Wang, Mingyu Guo, Zixuan Wang, Weisong Shi
similarity 0.70
Abstract

Camera-based driving models build a dense bird's-eye-view (BEV) grid and spend the same computation on every cell of it, although the vehicle crosses only a few of those cells within the planning horizon. We present BEVCast, a two-stage BEV whose resolution adapts to the predicted driving path. A coarse pass encodes the whole scene on a grid of 4.096 m cells. A heat head trained on the recorded path assigns a heat to every coarse cell and the cells with the highest heat are refined into 1.024 m cells under a fixed budget. The remaining cells keep their coarse resolution, so the trajectory head reads a mixed-resolution BEV that still covers the entire scene and needs neither an HD map nor a navigation command. Against a full grid of 1.024 m cells with the same architecture and training recipe, BEVCast at a 10% refinement budget encodes 28% of the BEV queries and needs 66% of the BEV encoder time at batch size 1. On nuScenes its mean displacement error is 1.078 m against 1.149 m and its drivable area violation rate is 1.46% against 2.29%. On NAVSIM navtest its mean displacement error is 0.577 m against 0.598 m and its extended predictive driver model score is 82.51 against 81.28. Next to published planners BEVCast reaches a comparable error on both benchmarks without a navigation command. The resolution of a driving BEV can therefore follow the task instead of the grid.

0.16