CS Paper Radar

PathLift: Depth-Conditioned Metric Lifting for Visual-Navigation Priors

Gwanjun Shin, Hyeongseok Suh, Hongmo Jung, Jongwoo Lim

cs.RO ·submitted 2026-10-12 03:12 UTC · v1
published

Abstract

Generalist visual-navigation policies tell a robot which direction to go but not how far. A separate lifting step is needed at deployment to convert their unitless trajectory into a metric path that a controller can track; existing scalar lifters apply uniform scaling that misses per-waypoint corrections, while in-policy approaches that inject monocular depth into the policy inherit the prediction errors of the depth model near obstacles and at close range. We present PathLift, a per-waypoint depth-conditioned adapter that lifts a pre-trained visual-navigation policy by consuming an explicit, sensor-grade depth source (RGB-D, stereo, or projected LiDAR) and fitting per-waypoint magnitude and lateral residuals to a canonicalized prior. PathLift consistently improves closed-loop navigation across diverse visual-navigation policies in simulation and on a real wheeled robot under both stereo and LiDAR depth. By turning the policy's unitless intent into a depth-feasible metric path in a single feed-forward pass, the adapter lifts real-world success without test-time optimization.

Comment
9 pages of main text, accepted to CoRL 2026

Closest papers

Nearest neighbours by meaning across the whole index.

ERA: Error-Resistant Autonomous Object Navigation with Predicted Depth

cs.RO ·2026-11-13 ·Shunyang Huang, Shuo Wang, Wenyuan Xie, Mingyu Lin, Yue Ding +1 more
similarity 0.77
Abstract

Depth and 3D foundation models can predict geometry from RGB images, allowing zero-shot object navigation without a depth sensor. However, when predicted depth is mapped as if it came from a sensor, view-dependent errors accumulate in the map, remove exploration goals, and end the search before the agent can observe and correct them. We propose ERA, a training-free object navigation system that replaces the depth sensor with depth predicted from RGB images and poses. ERA follows a paradigm we call Move with Error: movement provides new views that correct map errors, and the corrected map enables further movement. It realizes this paradigm with revisable occupancy and with exploration from reachable viewpoints, which continues the search when no frontier remains, and verifies the target across views before stopping. On three benchmarks, ERA achieves state-of-the-art performance among training-free methods without depth sensors. Its map and exploration components also raise VLFM's success from 10.8% to 61.7% under the same predicted depth. We further deploy ERA on a real robot.

0.23

Adapting Monocular Depth Estimation in Novel Scenes through Disparity Refinement and Robot Ego-Motion

cs.RO cs.CV ·2026-11-11 ·Dimitrios Chatziparaschis, Georgios Georgakis, Adnan I. Ansar, Shehryar Khattak, Konstantinos Karydis
similarity 0.77
Abstract · 17 pages, 12 figures, journal

The geometric understanding of a scene is a crucial component for safe and efficient robotic operations in novel and unstructured environments. The recent emergence of foundation models for Monocular Depth Estimation (MDE) has provided an opportunity to enrich robotic perception capabilities with dense long-range depth predictions, replacing expensive onboard hardware (e.g., LiDARs and stereo cameras). However, these offline models are primarily trained on affine-invariant depth representations, and their generalization to novel scenes remains unclear. In this work we present EM-ViT, a monocular depth estimation model that learns to adapt online relative depth inputs from a foundation model prior to the metric scale with observations collected during robotic operations. Motivated by the stereo camera parameterization, our method decomposes depth prediction via dense disparity refinement to recover the scene's relative structure and an effective baseline scalar prediction to determine the missing metric scale. The learning process leverages sparse LiDAR points and, optionally, the robot's Ego-Motion (EM) to rapidly train a lightweight Vision Transformer (ViT), while an internal gradient matching loss preserves the fine-grained semantic structure of the input disparity in real-time. We demonstrate the efficacy of our method on publicly available sequences, such as KITTI, and show that our online learning pipeline can adapt to novel scenes faster and with higher accuracy than existing MDE foundation models. The code and supplementary materials will be publicly available at https://emvit-mde.github.io.

0.29

StereoPatch: Patch-Aligned RGB-Depth Fusion for Spatial Perception in Robot Manipulation

cs.RO ·2026-09-14 ·Yanan Zhou, Zhaoyan Qian, James Zhao, Weiming Zhi
code/data similarity 0.72
Abstract · 8 pages

Recent advances in robot imitation learning have produced visuomotor policies that predict actions directly from visual observations. Yet visually similar scenes can require different actions as target position, object height, or contact geometry changes. Pretrained RGB features may map these geometrically distinct states to similar policy inputs, while simply adding depth requires the policy to learn RGB-depth correspondence from the same limited demonstrations used to learn control. We introduce StereoPatch, a patch-aligned RGB-depth representation that binds registered metric geometry directly to the RGB patches used for action prediction. On a shared 2-D patch grid, asymmetric cross-attention incorporates depth information into the corresponding RGB features before action decoding. The resulting StereoPatch Tokens provide a geometry-aware visual representation that can condition general visuomotor policies without changing their underlying learning objectives. Across six real-robot tasks, StereoPatch achieves higher closed-loop success than appearance-only, geometry-only, raw RGB-D, and late-fusion baselines. Additional experiments across three simulation suites evaluate compatibility across visuomotor policy architectures, spatial generalization, and operating limits. Results suggest that resolving control-relevant geometric ambiguity benefits from aligning depth directly with the visual features used for action prediction, rather than supplying it as an independent modality. Project page: https://aus.bot/research/stereopatch/.

0.57

Stereo-Planner: Learning Stereo-to-Trajectory Planning for Zero-Shot Sim-to-Real Quadrotor Navigation

cs.RO ·2026-10-11 ·Hongming Shen, Junjie Lu, Xun Chen, Wei Wang, Xinhang Xu +2 more
benchmarkcode/data similarity 0.72
Abstract

Existing navigation systems commonly rely on dedicated depth sensors or explicit depth reconstruction, while learning to generate trajectories directly from RGB images remains challenging due to the sim-to-real domain gap. In this work, we propose Stereo-Planner, an end-to-end vision-to-trajectory framework that enables zero-shot sim-to-real planning from stereo RGB observations. The key idea is to formulate trajectory generation as state- and scale-conditioned querying of latent stereo geometry. A Scene Representor incorporates a pretrained vision grounding foundation model to extract geometric cues shared across simulated and real-world environments, supporting generalization across visual domains. A lightweight Trajectory Decoder then translates these representations into trajectories through interleaved attention, separating trajectory-state interaction from scene-feature retrieval and incorporating the stereo baseline as a metric-scale cue. With these designs, Stereo-Planner is trained entirely on simulated data by minimizing differentiable trajectory costs and deployed directly in real-world environments without fine-tuning. Benchmark results demonstrate strong cross-scene generalization, with a 95% success rate in simulation environments at a commanded speed of 8 m/s, and competitive performance against depth-based planners using only stereo RGB observations for scene perception. Furthermore, deployment on a compact quadrotor equipped with an NVIDIA Orin NX enables autonomous flight at speeds of up to 7 m/s, with a mean onboard vision-to-action inference time of 24.27 ms. The software, simulation environments, and hardware designs will be open-sourced at https://github.com/Stereo-Planner/Stereo-Planner.

0.33

PhysWAM: Physically Consistent World Action Model for Autonomous Driving

cs.RO cs.CV ·2026-09-29 ·Dhruv Parikh, Fengcheng Yu, Quankai Gao, Jiawei Yang, Junjie Ye +9 more
similarity 0.72
Abstract · Technical Report

World-action models (WAMs) jointly predict how a scene will evolve and how an agent should act, however joint generation alone does not necessarily impose a shared geometric constraint on these predictions. We present PhysWAM, a unified world-action model for autonomous driving that co-denoises multiview video, metric depth, and ego motion within a single flow-matching transformer. To ground world and action generation in measured scene geometry, we introduce Coupled Point Projection (CPP) that unprojects the generated depth into 3D points, transforms them using the generated $\mathrm{SE}(3)$ ego motion, and minimizes their distance to LiDAR points transformed using the recorded ego motion. This geometric constraint promotes physical consistency with the measured scene by jointly supervising generated depth and motion alongside their standard flow-matching objectives. At inference, trajectory selection relies only on a simple label-free consensus rule, with no learned scorer or simulator feedback. We evaluate PhysWAM across NAVSIM v1 and v2 planning, zero-shot closed-loop transfer, and future video and metric-depth prediction. Despite PhysWAM's simple selection procedure, it achieves strong planning performance and transfers zero-shot to unseen driving environments. It also generates accurate metric depth and temporally coherent video, with CPP improving both planning and depth prediction. Together, these results demonstrate that the geometric relationship between scene depth and ego motion provides a direct way to couple world and action generation within a simple unified model.

0.18

Learning Geometry-Aware Planning Representations for Monocular Flight with Cross-Modal Supervision

cs.RO ·2026-10-19 ·Wencan Feng, Bailing Tian, Yulin Hui, Zhiyu Li, Junjie Lu
similarity 0.72
Abstract

Existing high-speed navigation systems for micro aerial vehicles (MAVs) commonly rely on depth cameras, stereo vision, or LiDAR to obtain explicit geometric information, while monocular cameras offer a lighter and lower-cost alternative. However, monocular flight remains challenging because RGB images offer no direct metric cues and visual appearance varies considerably across environments. We propose a geometry-aware monocular visual planning framework that predicts trajectories from two image frames, their relative pose, and the MAV state. Without explicitly reconstructing depth, the proposed method complements the downstream planning objective with feature-level geometric supervision by transferring the planning-relevant representation learned by a privileged depth expert to the RGB planner through cross-modal distillation. The framework first trains a depth-based geometric expert, then distills its planning features into a monocular branch using paired RGB-D observations, and finally adapts the planner to the downstream trajectory planning objective. This design encourages the policy to learn planning-relevant geometric features, enabling collision avoidance. We further use a 3D Gaussian Splatting (3DGS) simulator to render visual observations for data collection, paired RGB-D supervision, and simulation evaluation. The planner trained in simulation is then deployed in real-world environments without real-world fine-tuning, achieving obstacle avoidance at speeds of up to 6.5 m/s.

0.17

PointWalker: Mapless Quadruped Locomotion Directly From Raw LiDAR Point Clouds

cs.RO ·2026-10-11 ·Sicen Li, Zhen Chu, Chao Li, Jun Zheng, Qiuguo Zhu +1 more
similarity 0.72
Abstract · 8 pages, 15 figures, 5 tables. Submitted to IEEE Robotics and Automation Letters (RA-L)

Quadruped robots deployed for inspection and field missions must cross heterogeneous terrain, from stairs, slopes, and gaps to high platforms, stepping stones, and balance beams, where safe support is sparse or see-through. Existing methods interpose a terrain map or a depth image between sensing and control. Maps are costly to maintain, corrupted by odometry drift and outliers, and misled by see-through gratings, while depth cameras degrade with lighting and surface material. In this paper, we present PointWalker, a mapless framework whose single reinforcement learning policy directly consumes raw point clouds from four light detection and ranging (LiDAR) sensors. Voxelized points are encoded by linear self-attention and fused with proprioception through cross-attention, so terrain geometry reaches the policy without maps or foothold estimation. One proximal policy optimization (PPO) run, with terrain-aware rewards and dual-channel simulation of see-through gratings, yields one policy for all seven terrain classes with a 90.1% mean success rate in simulation. Deployed zero-shot on a Deep Robotics X30 at 50 Hz onboard, it crosses 0.8-m gaps, climbs 0.8-m platforms and 45° steel-grating stairs, carries a 50-kg payload, and completes a 2.5-km mountain route.

0.15

Towards Path-Creative Navigation: Robot Navigation through Embodied Interaction

cs.RO ·2026-10-08 ·Haoyu Xi, Siwei Cheng, Xiangyuan Liu, Brenda Li, Wei Zhang
similarity 0.72
Abstract

Autonomous navigation in cluttered and constrained environments typically assumes a fixed environment and searches only for paths within existing free space. However, a route can be blocked by an articulated structure, a movable object, or a pedestrian, and reaching the goal may therefore require appropriate embodied interaction with the environment. This paper formulates Path-Creative Navigation (PCN), a navigation paradigm in which the robot recovers free space by coordinating locomotion and embodied interaction, and addresses one class of PCN tasks with a mapless framework. The vision-LiDAR-odometry framework integrates local observations, obstacle geometry, and robot-state estimates through a unified navigation system, providing stable semantic and geometric information for navigation and interaction. The traversability-aware decision method utilizes visual and LiDAR distance information to determine whether a blockage is actionable and whether it can be safely bypassed, enabling the robot to interact only when necessary while supporting articulated structure pushing, movable object pushing, obstacle avoidance, and pedestrian requests. We design simulation scenarios and evaluate different methods in both simulation and two real-world tasks that cannot be completed by conventional navigation alone without embodied interaction. These results demonstrate that our framework achieves higher task completion than the baseline methods by coordinating navigation and interaction in cluttered and constrained environments.

0.17