CS Paper Radar

TriSAR-3D and PaintFusion: A Novel Trimodal LiDAR-RGB-Thermal Dataset and Method for 3D Person Detection in Search and Rescue

Markus Kramer, Jan Wachenfeld, Oskar von Stryk

cs.CV cs.RO ·submitted 2026-10-15 18:03 UTC · v1
code/data

Abstract

Reliable 3D person detection is important for rescue robotics to give first responders situational awareness. Yet most multimodal 3D detection research targets automotive scenarios in which pedestrians mostly appear in a narrow range of upright, near-road poses. It is therefore unclear how much of the reported performance transfers to rescue settings, as a person may be lying, partially occluded, or in unstructured indoor and outdoor environments. To investigate this gap, we introduce TriSAR-3D, a multimodal person detection dataset recorded with a high-resolution 128-channel LiDAR, an RGB camera, and a thermal camera. It captures varied poses in indoor as well as outdoor locations at different times of day to study their influence on 3D object detector performance. Furthermore, we propose a novel trimodal 3D detection pipeline, PaintFusion, that fuses PointPainting-based evidence using a simple MLP. We show that the derived method reaches 65.4 AP@50 and thereby outperforms strong LiDAR-only (CenterPoint, 53.4), RGB+LiDAR (BEVFusion, 60.5), and adapted trimodal (Tri-BEVFusion, 60.7) baselines on the dataset. At the same time, it is substantially faster than other fusion-based methods such as BEVFusion, with a per-frame latency of 51.6 ms compared to 101 ms. Additionally, we test how the performance of different 3D object detectors generalizes to unseen pose categories. Removing lying instances from training data collapses the lying-pose AP@50 to near zero across all evaluated detectors. The results indicate that dataset diversity exerts a large effect on 3D object detection performance. The dataset and code are available at https://github.com/MarkusKramer1/3D-Trimodal-People-Detection.

Closest papers

Nearest neighbours by meaning across the whole index.

PALIN: Pixel-Aligned LiDAR-NIR Multimodal 3D Object Detection with Benchmark

cs.CV ·2026-11-14 ·Yanan Zhang, Amit Vishnia, Chengbo Ai, Eleni Christofa, Runan Cheng +4 more
benchmark similarity 0.72
Abstract · 17 pages, including references and appendices

3D object detection is critical for intelligent transportation systems. LiDAR has been widely adopted for accurate geometric measurements; however, purely geometric representations remain ambiguous under sparse observations and occlusions, while cross-sensor multimodal fusion suffers from calibration and synchronization errors. To overcome these challenges, we leverage an Ouster LiDAR to construct PALIN (Pixel-Aligned LiDAR-NIR), a large-scale intrinsically pixel-aligned multimodal dataset jointly capturing geometry and NIR intensity, comprising approximately 8,000 annotated frames from static urban intersections and diverse mobile suburban scenes. Building upon this dataset, we propose CMambaFusion, a novel fusion framework consisting of a four-directional Cross-Mamba module for bidirectional cross-modal interaction and a Gated Concat-Mamba module for joint feature refinement. Extensive experiments demonstrate that PALIN enables effective multimodal learning, and CMambaFusion achieves superior accuracy-efficiency trade-offs over both LiDAR-only and representative fusion baselines.

0.18

TAP3D: Thermal-Assisted 3D Human Point Clouds

cs.CV cs.HC ·2026-10-08 ·Xie Zhang, Chengxiao Li, Xuan Liu, Chenshu Wu
top venuecode/data similarity 0.71
Abstract

Human body point clouds are a versatile representation for AI-enabled human sensing. However, existing methods using LiDAR, radar, and depth cameras suffer from inherent drawbacks in high cost, sparse reconstruction, and privacy concerns, etc. In this paper, we exploit low-cost thermal arrays and present TAP3D, the first system to reconstruct 3D human point clouds from body heat signatures, offering significant advantages in cost, density, human sensitivity, and privacy. To overcome major challenges in depth estimation, thermal interference, and multi-person separation, we propose a novel physics-informed design, which integrates a forward thermal physics model with two distinct modules: multi-primitive estimation for self-supervised joint recovery of depth and other thermal properties, and geometric perspective fusion for suppressing interference and disentangling multiple people. We implement TAP3D using a single commodity thermal array sensor and build a large-scale dataset (160K samples, 8 environments, 11 users) for evaluation. TAP3D achieves remarkable accuracy for dense point cloud generation, enabling downstream tasks like fall detection (91.46%), indoor tracking (21.86 cm MAE), and human mesh recovery (4.87 cm error). By transforming body heat into point clouds for the first time, TAP3D pioneers a new paradigm for privacy-first, fully passive human sensing for many applications. TAP3D is open-sourced at https://github.com/aiot-lab/TAP3D.

0.53

Solution for UCF UrbanTwin V2X-Real Track: Sim-to-Real Urban LiDAR 3D Object Detection

cs.CV ·2026-09-07 ·Pu Luo, Cong Xu, Yumei Li, Kexin Zhang, Licheng Jiao +2 more
similarity 0.69
Abstract · 7 pages,2 figures

Bridging the simulation-to-reality gap in roadside LiDAR requires addressing several coupled discrepancies, including scene geometry, sampling density, return patterns, and pedestrian scale. This report presents a multi-source collaborative training and class-aware fusion framework for Sim2Real 3D detection. The method organizes digital-twin scans, diffusion-redrawn scans, density-stabilized scans, and pedestrian morphology-aligned samples into a unified training pool with complementary roles. Within a common DSVT detection formulation, source-specialized expert branches preserve those roles while optimizing for the same detection objective. At inference, a predefined class-aware fusion pathway integrates geometry-stable and calibration-aware branches for vehicles, sampling-complementary branches for trucks, and morphology-consistent evidence for pedestrians. A label-free point-cloud center blend then refines geometric localization. On the UrbanTwin V2X-Real hidden test set, the unified system achieves a combined score of 0.7421, with 3D mAP@0.5 of 0.4518 and a realism score of 0.8871. The results indicate that a stable, interpretable collaboration among data sources is more valuable than unconstrained aggregation of model outputs.

0.29

Lightweight and Resource-Efficient Perception for Robotic Guide Dogs

cs.DC cs.CV ·2026-10-02 ·Jinse Kwon, Yoojin Lim, Choonghan Lee, Yongseung Yu, Yongin Kwon +1 more
publishedbenchmark similarity 0.68
Abstract · accepted in ACCV 2026

Robotic guide dogs should understand their surroundings, objects, and potential risks. Prior research has focused on raw sensor data from cameras and 2D or 3D LiDAR, which precisely measure distance points rather than provide a semantic understanding of the scene. While these physical measurements are effective for robot-centric collision avoidance and robot safety, they are not suitable for human-centric guidance. The system should recognize the type and relevance of obstacles and explain them, clearly and actionably, in terms of their spatial relation to the user. We present complete on-device perception modules that fuse a 360 camera and a 2D LiDAR for reliable collision avoidance, with moving-object detection and tracking for human-centric guidance. Finally, in walking-impossible situations, a vision--language model delivers pathway explanations as a safety mechanism to reduce user anxiety. In experiments, verification of fused 360 camera--LiDAR depth shows reliable near-range perception but inherent mid-range bias, while the system as a whole sustained real-time performance under 55 W. On the real-world egocentric GuideDogQA benchmark, our system achieved 83.8\% accuracy, compared with 67.1\% for GPT-4o. These results demonstrate that practical human-centric guidance with real-time on-device inference is feasible even on quadrupeds.

0.21

FastBEVFusion: Simple Multi-Modal Fusion for 3D Object Detection at 50 FPS

cs.CV cs.RO ·2026-10-27 ·Tom Sanitz, Emre Gülsoylu, Simone Frintrop, Christian Wilms
published similarity 0.68
Abstract · Accepted at Iberian Robotics Conference (ROBOT2026)

Reliable real-time 3D object detection based on LiDAR and camera data is critical for safety in autonomous driving, where systems must accurately perceive their surroundings with minimal latency. Many state-of-the-art systems achieve high-quality detection results but fail to meet real-time constraints, limiting their practical use. To address this challenge, we propose FastBEVFusion, a simple, fast, and robust fusion system for 3D object detection. Based on modality-specific features, FastBEVFusion projects these features into semi-aligned modality-specific BEV spaces, without relying on a computationally intensive and potentially error-prone depth estimation. Given these BEV spaces, we propose a light-weight, soft, and dynamic fusion module based on cross-attention, which adapts dynamically to the scene context and enables feature fusion across the entire BEV spaces. Experiments on the complex nuScenes dataset show that FastBEVFusion outperforms state-of-the-art real-time systems, and achieves over 50 FPS without deployment libraries. Additionally, our system shows strong robustness to calibration errors, making FastBEVFusion a powerful 3D object detection system for real-world applications.

0.28

TriO: Tri-Modal Unsupervised Occupancy World Model for Anything Perception

cs.CV cs.AI ·2026-09-25 ·Quinlan Sykora, Sourav Biswas, Christopher Diehl, Andrew Cunningham, Thomas Gilles +1 more
top venue similarity 0.68
Abstract · Published at ECCV 2026, 49 pages, 20 figures

We present TriO, a multi-modal unsupervised world model that predicts 4D occupancy, obstacle segmentation, flow and LiDAR. In contrast to prior work, TriO utilizes three distinct sensor modalities (camera, LiDAR, and RADAR) as both inputs and sources of self-supervision, eliminating the need for additional human annotations. Thanks to its novel supervision, the model is able to segment any occupancy from the drivable surface, overcoming the limitations of existing open-set methods in handling long-tail objects. TriO achieves state-of-the-art results in multiple 3D and 4D tasks, including occupancy, flow, and LiDAR prediction, as well as zero-shot road obstacle segmentation across multiple datasets such as Argoverse 2, and Spotting the Unexpected.

0.40

TAPVid-MV: A Benchmark for Tracking Any Point in 3D Across Multiple Views

cs.CV ·2026-09-01 ·Skanda Koppula, Frano Rajic, Abdullah Faiz Ur Rahman, Yi Yang, Ignacio Rocco +7 more
benchmarkcode/data similarity 0.67
Abstract

Multi-camera systems are increasingly practical for robotics, AR/VR, and autonomous driving because complementary views reduce depth ambiguity and preserve visibility under occlusion. Existing point-tracking benchmarks, however, focus on a single video or static multi-camera rigs. None test long-term 3D point tracking across several synchronized views under camera motion. We introduce TAPVid-MV (Tracking Any Point in Video across Multiple Views), the first benchmark for this setting. It contains a curated set of 238 sequences, 1,004 calibrated camera streams, and 74,147 point tracks across seven subsets spanning indoor and outdoor domains, from robotics and human activity to driving and synthetic procedural scenes. We obtain these trajectories using dataset-specific auxiliary modalities: sensor depth, LiDAR, SLAM and SfM points, human meshes, posed object meshes, and simulation. Every sequence and trajectory is visually verified by human annotators. Across more than 30 baselines, no method comes close to solving the task. Surprisingly, existing multi-view point trackers do not consistently outperform monocular point trackers. By evaluating reconstruction and point tracking on the same datasets, TAPVid-MV helps distinguish errors in recovered geometry from errors in point correspondence. Through this joint analysis, we identify geometry recovery as a major bottleneck for accurate 3D point tracking. Beyond multi-view 3D point tracking, our released annotations support monocular 2D and 3D point tracking, future-trajectory prediction, and 4D reconstruction. Project page: https://tapvidmv.github.io/

0.46

Map-Det3D: Metric Feed-Forward 3D Reconstruction Prior for Multi-view 3D Object Detection from Streaming Inputs

cs.CV ·2026-08-12 ·Yung-Hsu Yang, Luigi Piccinelli, Samuel Rota Bulò, Sunghwan Hong, Denis Rozumny +5 more
top venuecode/data similarity 0.67
Abstract · ECCV 2026

Metric 3D object detection is a core capability for embodied agents, yet most reliable systems lean on depth sensors, trading away cost, power, and integration simplicity. This motivates monocular 3D detection, which avoids additional constraints, yet it faces a major obstacle: from a single image, depth, and especially absolute scale, are underconstrained. As a result, the prevailing pattern of detecting in 2D and then predicting 3D attributes is often brittle, since modest range errors can dominate 3D localization, and the learned scale prior can fail when cameras, motion, or environments undergo domain shifts. To address this, we propose Map-Det3D, an online multi-view 3D object detection model that brings detection directly into a 3D space reconstructed from RGB. We map a short temporal window into multiple views and repurpose a feed-forward metric 3D reconstruction model as our geometric backbone while tuning its object-aware capabilities. Building on this representation, Map-Det3D directly predicts boxes in metric 3D space, without the widely used 2D-to-3D lifting. Experiments across different benchmarks show that this design supports strong online performance and robust transfer without adaptation, suggesting that training reconstruction priors for detection is a practical route to stable metric 3D detection from monocular video. Code and models are available at https://royyang0714.github.io/Map-Det3D.

0.86