CS Paper Radar

A Singularity Avoiding Track Model for Race Car Optimization

Adwait Verulkar, Behzad Danaei, Srikanth Sivaramakrishnan, Ryan Trinter

cs.RO eess.SY ·submitted 2026-10-27 00:24 UTC · v1

Abstract

A track fitting pipeline is presented that converts a measured racetrack point cloud into a closed, $C^4$ differentiable, three-dimensional surface model suitable for high-fidelity Modelica race-car optimization. The surface is a Monge patch, parametrised by a curvilinear arc-length coordinate measured along the minimum-curvature line (MCL) and a signed lateral offset, with a height polynomial of user-selectable degree capturing the cross-sectional elevation profile. The choice of MCL as the reference line is deliberate since anchoring the same surface on the geometric centre-line can cause adjacent normals to cross inside the drivable region on tight corners. The resulting non-injective parametrisation assigns multiple curvilinear addresses to the same three-dimensional point and returns invalid road geometry. The MCL is obtained from a quadratic program that minimises integrated curvature subject to track-boundary, periodicity, and jerk-regularisation constraints. By reducing total curvature while remaining within the track bounds, the MCL moves the region of parametrisation breakdown outside the drivable strip on all circuits studied, keeps the normal map injective across the full track width, and yields a more linear time-to-arc-length transformation for minimum lap-time problems. The fitted surface and the associated track widths are exported as periodic piecewise-quintic $C^4$ B-splines, solved as a nonlinear program.

Comment
American Modelica & FMI Conference 2026

Closest papers

Nearest neighbours by meaning across the whole index.

The Flat Earth Error: Differential Geometry in Vehicle Dynamics

eess.SY ·2026-08-25 ·David J. N. Limebeer, Charl van de Merwe
benchmark similarity 0.63
Abstract · 38 pages, 12 figures, 3 tables

The widespread idealization of road surfaces as horizontal planes can introduce significant inaccuracies into vehicle dynamics simulations, a phenomenon termed the ``Flat Earth Error.'' This article provides an expository guide to the use of classical differential geometry to model vehicular motion on curved surfaces. The influence of road curvature is characterized using the metric tensor, the second fundamental form, the shape operator, and the Christoffel symbols. Reproducible MATLAB scripts using an elliptic cone as a benchmark example illustrate the construction of geodesic curves and the simulation of particle dynamics on curved surfaces. The resulting geometric structures are integrated into a single-track vehicle-and-track model within a pseudospectral optimal control framework. Trajectory optimization results over a high-density mobile LiDAR profile of Darlington Raceway are used to generate a high-fidelity road-surface model. This model is used within an hp-adaptive collocation framework to investigate minimum lap time optimal control vehicular trajectories. These computations capture the non-smooth traction saturation limits of the tyres alongside position-dependent variations in gravitational forcing. Integrating differential geometry, multibody mechanics, and optimal control is essential for high-fidelity driven and autonomous vehicle-dynamics simulations. The optimized velocity and tyre slip profiles show that real-world racing track geometries induce dynamically significant three-dimensional effects. These results are particularly relevant to performance-limited simulations on highly banked track surfaces such as NASCAR ovals.

0.19

A 2-DOF MultiBody Track Joint for Race Car Optimization

cs.RO eess.SY ·2026-10-26 ·Srikanth Sivaramakrishnan, Behzad Danaei, Adwait Verulkar, Ryan Trinter
unusual similarity 0.54
Abstract · American Modelica & FMI Conference 2026

TrackJoint is a Modelica MultiBody component that turns a three-dimensional road surface into a joint with two degrees of freedom. The two joint coordinates are the distance travelled along a reference line and the sideways offset from that line. Together they give the position, orientation and angular velocity of a single frame_b connector. All road geometry reaches the joint as a small set of periodic piecewise-quintic splines, so one component can represent any circuit whose splines have been fitted beforehand. The road constraint is closed with d'Alembert's principle. The two generalized forces that belong to the joint coordinates are set to zero, so no Lagrange multipliers are needed. The joint is connected to a multibody race car in Dymola and the pair is exported as one FMI~3.0 FMU. The same FMU is then used for time-domain simulation and for CasADi/IPOPT minimum lap-time optimization, with no change to the model in between. This works because the joint keeps the arc-length coordinate as a real state and publishes its time derivative, which is the quantity that lets the problem be rewritten with distance We report results for minimum lap time simulations on the Singapore Formula~1 circuit.

0.55

High-Fidelity Multi-Body Simulator for Autonomous Racing

cs.RO eess.SY ·2026-09-11 ·Nicola Musiu, Francesco Iacovacci, Fausto Lupo, Matteo Pini, Giovanni Scapicchi +9 more
similarity 0.53
Abstract

We present a custom high-fidelity vehicle dynamics simulation environment for testing and validation of Autonomous Racing software. The digital twin of the autonomous vehicle is developed in Dymola, using racecar dynamics modeling libraries to build a complete multi-body model. A 3D road surface, including elevation profiles and curbs, is implemented using the Curved Regular Grid (CRG) standard. The model is exported from Dymola as a Functional Mock-up Unit (FMU) and integrated into a custom software-in-the-loop simulator, where communication interfaces with the autonomous racing stack were developed in C++. A calibration procedure based on experimental data is also presented, along with a validation study to further support the quality of the proposed framework. The simulator runs in real time on a portable computer and provides reliable ground truth for algorithms validation prior to real-world deployment.

0.20

Driving Context-guided Model Predictive Planning and Control for Autonomous Car Racing at the Limit and Beyond

cs.RO eess.SY ·2026-09-11 ·Ayoub Raji, Federico Sacco, Nicola Musiu, Marko Bertogna
published similarity 0.52
Abstract · Accepted to IEEE/RSJ International Conference on Intelligent Robots & Systems - IROS 2026

This paper presents a Model Predictive Control-based motion planning and control pipeline for autonomous car racing capable of adapting to different driving contexts, such as overtaking, nominal driving, and countersteering. A Cost Blending state machine manages the identification of different driving contexts and the selection of their predefined weights to be applied to the Model Predictive Planning (MPP) and Control (MPC) modules. The two optimization-based solutions share the same problem formulation and model, differing only in horizon length, rate, tuning, and in their open-loop versus closed-loop approach to maximize the effectiveness of their interaction. The work is validated on the fully autonomous open-wheel racecar Superformula EAV-25, with a lap time achieved that is within 2% of the best human driver reference. The results demonstrate the capability of the solution in driving at the limit of handling, smoothly executing overtaking maneuvers, and quickly reacting to high oversteering conditions to recover the vehicle stability.

0.31

Sideslip-Conditioned Drift Trajectory Planning with Flow Matching and Control Barrier Functions

cs.RO ·2026-11-17 ·Seokjun Lee, Seung-Hyun Kong
similarity 0.52
Abstract · 8 pages, 4 figures, 3 tables. Under review. Demonstration video: https://youtu.be/nskukDD1MFg

Drifting, the deliberate control of a vehicle at large sideslip angles, is relevant to both motorsport and recovery from unexpected oversteer. Existing autonomous drifting methods typically determine drift intensity through predefined reference trajectories, optimization objectives, or learned policy rewards, rather than accepting a desired sideslip angle as an explicit input. We propose, to the best of our knowledge, the first generative drift trajectory planner explicitly conditioned on a requested peak sideslip angle. A conditional flow matching model is trained on demonstrated drift laps with hindsight-derived sideslip labels and refined through reinforcement fine-tuning. A control barrier function (CBF) correction is then applied to satisfy model-based road, tire friction, and actuator constraints at the planning waypoints. In closed-loop experiments in the racing simulator Assetto Corsa, a nonlinear model predictive controller tracks the generated plans for six requested sideslip angles from 20 deg to 45 deg, with 30 laps (approximately 75 km) per request. The median peak sideslip angle measured across drift-corner passes follows the requested angle, with a mean absolute error of 1.2 deg across the six conditions. Ablation experiments show that reinforcement fine-tuning improves conditioning accuracy, while CBF correction substantially reduces off-road and spin events.

0.43

Robust Offset-Free Lane-Keeping Control Framework for Vision-Only Automated Vehicles

cs.RO cs.CVeess.SY ·2026-10-23 ·Der-Hau Lee
similarity 0.51
Abstract · 13 pages, 10 figures

Achieving accurate, real-time lane-keeping control during high-speed cornering on large-curvature roads while ensuring robust vehicle stability is a critical challenge in autonomous driving. To address this challenge, this study developed a robust offset-free model predictive control (OF-MPC) framework for vision-based autonomous vehicle lane-keeping. The regulation problem in this framework is solved using several algorithms. Numerical simulation results indicated that the interpolation-tube-based constrained iterative linear quadratic regulator (itube-CILQR) algorithm outperformed solvers based on the standard Interior Point Optimizer (IPOPT) and Operator Splitting Quadratic Program (OSQP), achieving a mean computation time of less than 5 ms. The itube-CILQR algorithm was then used for vehicle control in vision-based lane-keeping experiments in a simulation environment to quantify the perceptual uncertainty of a visual perception model (multitask UNet). This quantification was performed using the OF-MPC framework for traffic scenes that were not encountered during model training. Overall, the developed OF-MPC framework and the proposed method for characterizing the perceptual uncertainty of a visual perception system in unseen environments can contribute to the future development of advanced autonomous driving systems.

0.36

MAP2: Model- and Acceleration-Based Pursuit with MPC and Gaussian Process Residual Learning for Autonomous Racing

cs.RO ·2026-10-08 ·Weizhan Huang, Cheng Hu, Edoardo Ghignone, Nicolas Baumann, Yiqin Wang +3 more
similarity 0.51
Abstract · 8 pages, 8 figures, 5 tables

Autonomous racing requires accurate trajectory tracking near the handling limits of a vehicle while maintaining low computational latency. Geometric controllers are computationally efficient, but the Ackermann steering geometry becomes invalid under limit-handling conditions. Model- and Acceleration-based Pursuit (MAP) preserves the simplicity of geometric approaches while leveraging tire dynamics. Yet MAP remains fundamentally a geometric controller that relies on Ackermann steering geometry, and its tire model may not fully capture the vehicle's actual dynamic response. This paper presents MAP2, a model-based pursuit controller that combines a curvature-based kinematic MPC and a Sparse Gaussian Process (SGP) residual correction. The proposed algorithm uses MPC to optimize kinematic control inputs over a prediction horizon and maps them to steering commands through a tire dynamics model augmented with SGP residual correction. Real-world vehicle experiments demonstrate substantial reductions in lateral tracking error and lap time. Compared with MAP and Pure Pursuit (PP), MAP2 reduces the average lateral tracking error by 37.99% and 44.65%, respectively, while reducing average lap time by at least 1.5%.

0.26

Decoupling Physical Speed from Path Parameterization in Singularity-Free Guiding Vector Fields

cs.RO ·2026-09-17 ·Zhouru Xiao, Sha Luo, Yang Lu, Mingliang Xiao, Weijia Yao +3 more
similarity 0.51
Abstract

The existing singularity-free guiding vector field (SF-GVF) with an additional virtual coordinate can eliminate singular points (i.e., points where the vector field vanishes) inherent in conventional GVFs and guarantee global convergence of robot trajectories to closed and self-intersecting desired paths. However, the desired speed given by the GVF along the desired path in the original lower-dimensional space cannot be arbitrarily specified but depends on path parameterizations. One possible workaround is to partially normalize the physical projection of the SF-GVF and assign a user-designed speed. However, we show that this workaround may introduce new singularities since the normalization denominator can become zero. To address this issue, we propose a new SF-GVF with prescribed physical speed (PPS). The integral curves of the new SF-GVF converge exponentially to the desired path from any initial condition in the higher-dimensional space (including virtual dimension); more importantly, the robot's physical speed converges to the PPS, while the path-error dynamics remain invariant under regular reparameterizations of the desired path. We further develop a saturated acceleration control law for second-order kinematic models. Finally, comparative simulations and 3D path-following experiments with a quadrotor under different PPS profiles validate the theoretical results and demonstrate the effectiveness of the proposed approach.

0.30