CS Paper Radar

MAP2: Model- and Acceleration-Based Pursuit with MPC and Gaussian Process Residual Learning for Autonomous Racing

Weizhan Huang, Cheng Hu, Edoardo Ghignone, Nicolas Baumann, Yiqin Wang, Hongye Su, Lei Xie, Michele Magno

cs.RO ·submitted 2026-10-08 15:52 UTC · v1

Abstract

Autonomous racing requires accurate trajectory tracking near the handling limits of a vehicle while maintaining low computational latency. Geometric controllers are computationally efficient, but the Ackermann steering geometry becomes invalid under limit-handling conditions. Model- and Acceleration-based Pursuit (MAP) preserves the simplicity of geometric approaches while leveraging tire dynamics. Yet MAP remains fundamentally a geometric controller that relies on Ackermann steering geometry, and its tire model may not fully capture the vehicle's actual dynamic response. This paper presents MAP2, a model-based pursuit controller that combines a curvature-based kinematic MPC and a Sparse Gaussian Process (SGP) residual correction. The proposed algorithm uses MPC to optimize kinematic control inputs over a prediction horizon and maps them to steering commands through a tire dynamics model augmented with SGP residual correction. Real-world vehicle experiments demonstrate substantial reductions in lateral tracking error and lap time. Compared with MAP and Pure Pursuit (PP), MAP2 reduces the average lateral tracking error by 37.99% and 44.65%, respectively, while reducing average lap time by at least 1.5%.

Comment
8 pages, 8 figures, 5 tables

Closest papers

Nearest neighbours by meaning across the whole index.

LLA-MPC on Embedded Hardware: Rapid Adaptive Control with Thousands of Parallel Models

cs.RO eess.SY ·2026-10-02 ·Henry Z. Liao, Maitham F. AL-Sunni, John M. Dolan
publishedcode/data similarity 0.66
Abstract · This work has been accepted in the Sim2Real and Classical Control: From Rigorous Theory to Data-Driven Robotics Workshop at the 2026 IEEE/RS…

We present a generalized implementation of Look-Back and Look-Ahead Adaptive Model Predictive Control (LLA-MPC), a learning-free framework for real-time, rapid adaptive system identification and control. The original formulation was demonstrated only in simulation, for autonomous racing with a fixed model structure. Our implementation has modular dynamics and integrators, and we validate it on the F1TENTH platform under constrained computation and noisy state estimation. The system identifies tire parameters online by evaluating thousands of candidate models in real time on an embedded computer. Experiments with low-friction tires across changing surfaces show that LLA-MPC completes high-speed tracking tasks where a fixed nominal model fails. Code, videos, and our related work are available at: https://lla-control.github.io.

0.56

RACER: Residual-Adaptive Closed-Loop Estimation for Sampling-Based Planning in Wheeled-Quadruped Racing

cs.RO ·2026-10-05 ·Yuxiang Liu, Marla Eisman, Lizhi Yang, Aaron Ames, Francesco Borrelli
similarity 0.64
Abstract

We present RACER, a hierarchical control framework for wheel-based quadruped racing that combines an MPPI planner with a learned residual dynamics model and a low-level RL velocity tracker. The planner augments a nominal unicycle kinematic model with a neural residual term to capture the closed-loop tracking behavior of the RL policy. To train this residual model under limited real-world data, we propose Low-Rank Residual Adaptation (LoRRA), a two-stage approach that pre-trains on large-scale simulation data for broad coverage and then fine-tunes on a small real-world dataset with a low-rank constraint. In simulation, we empirically validate our engineering choices by showing (A) Residual dynamics improve the overall performance of our pipeline by capturing the tracking error of RL velocity tracker at high-speed cornering. (B) Residual dynamics trained with both source-domain and target-domain data gives racing performance significantly better than the residual dynamics trained with only target-domain data. (C) Low-rank constraint at target-domain adaptation gives higher success rates and higher performance than full-tune and from-scratch when domain gap in ground coefficient or joint gain increases.

0.23

Driving Context-guided Model Predictive Planning and Control for Autonomous Car Racing at the Limit and Beyond

cs.RO eess.SY ·2026-09-11 ·Ayoub Raji, Federico Sacco, Nicola Musiu, Marko Bertogna
published similarity 0.62
Abstract · Accepted to IEEE/RSJ International Conference on Intelligent Robots & Systems - IROS 2026

This paper presents a Model Predictive Control-based motion planning and control pipeline for autonomous car racing capable of adapting to different driving contexts, such as overtaking, nominal driving, and countersteering. A Cost Blending state machine manages the identification of different driving contexts and the selection of their predefined weights to be applied to the Model Predictive Planning (MPP) and Control (MPC) modules. The two optimization-based solutions share the same problem formulation and model, differing only in horizon length, rate, tuning, and in their open-loop versus closed-loop approach to maximize the effectiveness of their interaction. The work is validated on the fully autonomous open-wheel racecar Superformula EAV-25, with a lap time achieved that is within 2% of the best human driver reference. The results demonstrate the capability of the solution in driving at the limit of handling, smoothly executing overtaking maneuvers, and quickly reacting to high oversteering conditions to recover the vehicle stability.

0.31

Wheel-loader V-Cycle Automation with Deep Koopman MPC

cs.RO eess.SY ·2026-09-22 ·Armin Abdolmohammadi, Navid Mojahed, Dinesh Kumar, Bahram Ravani, Shima Nazari
similarity 0.61
Abstract · 8 pages, 4 figure

The repeated forward-reverse maneuvers performed by wheel loaders during earthmoving operations make them well suited for automation. However, the nonlinear dynamics of articulated vehicles and complex vehicle-terrain interactions limit the effectiveness of conventional model-based approaches. This paper presents a hierarchical framework that combines long-horizon geometric planning with data-driven predictive control for autonomous wheel-loader operation. A reduced-order articulated kinematic model is used to generate the maneuver geometry, where the forward and reverse trajectories are jointly optimized through a shared intermediate state. To capture the vehicle dynamics, two data-driven deep bilinear Koopman models are learned for the forward and reverse motions using data generated from high-fidelity simulations in Algoryx Dynamics. The learned Koopman representations are subsequently incorporated into a computationally efficient model predictive control (MPC) formulation for trajectory tracking. The resulting controller operates in real time within a 50-ms execution loop. High-fidelity simulation results demonstrate that the proposed end-to-end framework enables accurate and computationally efficient execution of wheel-loader V-cycle maneuvers, providing a promising approach toward autonomous operation of articulated heavy-duty machinery.

0.26

A Low-Cost, Open Platform for End-to-End Autonomous Driving on a Miniature Ackermann Vehicle

cs.LG cs.AIcs.RO ·2026-09-03 ·Gustavo Claudio Karl Couto, Eric Aislan Antonelo, Gabriel George Zipperer
similarity 0.60
Abstract

This paper presents a low-cost, open experimental platform for research in end-to-end autonomous driving with miniature Ackermann vehicles. The platform combines a physical vehicle, a printed urban track, data collection tools, trajectory registration, and a Webots digital twin, enabling controlled experiments that connect simulation-based autonomous-driving methods to real-world execution. As a first baseline, we implement command-conditioned behavior cloning, in which a neural policy receives an on-board camera image and a high-level navigation command and outputs steering and speed. The system is evaluated both on the physical vehicle and in simulation. In real closed-loop experiments, the learned policy follows lanes and executes commanded turns, reaching a mean cross-track error of 6.1 cm with respect to the reference route, close to the 4.7 cm observed in human demonstrations. In the digital twin, camera field of view has a strong effect on performance, reducing the mean cross-track error from 35.6 to 3.3 cm when widened from 58 to 120 degrees. Using the digital twin to generate synthetic driving data and a learned sim-to-real image translator to reduce the appearance gap, we further show that a higher-capacity policy trained on this synthetic data combined with real demonstrations is the only configuration that completes all four track routes in closed loop, whereas the compact baseline and the same network trained on real data alone complete fewer. These results establish the open platform as a practical testbed for sim-to-real studies and provide an initial command-conditioned imitation-learning baseline; we release it to support reproducible research.

0.30

Autonomous Track Racing with a Commercially Available Humanoid: System Design and Real-World Deployment

cs.RO ·2026-11-17 ·Koki Inami, Takashi Sato, Hiroyuki Oka, Shota Takizawa, Yuya Takahashi +5 more
similarity 0.59
Abstract · 7 pages, 2 figures. Submitted to IEEE Robotics and Automation Practice. Copyright may be transferred without notice, after which this versio…

Learning-based methods now let humanoids run robustly, and they have begun to compete in athletic events. Yet few reports describe a complete autonomous humanoid running system in an actual race, where the robot must follow a lane at a new venue, pace itself within hardware limits, and finish without intervention. We report such a system deployed on the Unitree G1, a commercially available general-purpose humanoid, in the 100 m, 400 m, and 1500 m events of the World Humanoid Robot Games 2026. The system integrates vision-based lane perception, path tracking, and a running policy trained by reinforcement learning with a human motion prior. To address the challenges of humanoid running, we stabilize head-camera images against body motion and use IMU-assisted leg odometry to bridge flight phases. To manage motor heating, we penalize hip-pitch torque during training, add heat-dissipation plates, and apply temperature-based speed limiting with event-specific pacing. The robot placed 13th of 74 in the 100 m, 10th of 44 in the 400 m first round before falling in the semifinal, and seventh of 35 in the 1500 m. In this deployment, thermal margin set the pace in every event, and the semifinal fall followed a lane-detection error.

0.26

Race to Recovery: Designing Advanced Safety Systems for Autonomous Driving via Learning Autonomous Racing

cs.RO ·2026-10-14 ·Teodor Ilie, Kleber Cabral, Sidney Givigi
similarity 0.59
Abstract · 13 pages, 6 figures, 8 tables. Submitted to IEEE Transactions on Intelligent Vehicles

Vehicles that lose control at the handling limit through icing, hydroplaning, or an abrupt evasive maneuver fall outside the operating envelope of production safety systems such as electronic stability control, which focus on preventing instability rather than recovering from it. Expert drivers regain authority in these conditions by drifting. Existing autonomous recovery approaches are validated on idealized scenarios, define "recovered" states empirically and inconsistently, or rely on offline-planned trajectories rather than acting online. We address these gaps by first training a racing policy with reinforcement learning that learns drifting as a time-optimal maneuver, then adapting it to recovery through continued training with a minimum-time reward. We define recovery relative to a phase-plane-grounded stable equilibrium and introduce Gym-Khana for controller training and evaluation. Across 294 initial loss-of-control states, the transferred policy improves recovery by 186.8% over a Stanley path tracker and outperforms both a nonlinear model predictive controller and a recovery-only policy trained from scratch, while also recovering faster on states the baseline can already handle. An ablation shows that racing pretraining, rather than broader initial-state exposure alone, drives this gain. Deployed on a physical 1:10-scale F1TENTH vehicle using system identification, actuator-lag modelling, and domain randomization, the transferred policy outperforms Stanley on every tested loss-of-control state, including recovering 50% of the time from a hard state the baseline never recovers from.

0.12

High-Speed Forward and Reverse Tractor-Trailer Driving with Learned Vehicle Dynamics

cs.RO eess.SY ·2026-11-15 ·Aaron Chen, David Shen, Taekyung Kim, Kaleb Ben Naveed, Dimitra Panagou
code/data similarity 0.58
Abstract · The first three authors contributed equally to this work. Project page: https://ds12a.github.io/drift-with-trailer/

Tractor-trailer systems are difficult to control, especially unstable during reverse motion, and their dynamics depend on difficult-to-measure factors, including road friction and suspension coefficients. We introduce a learned dynamics model for tractor-trailer control and compare it with a reduced-order dynamics model with Fiala tire forces as an analytic baseline. Specifically, we compare a model predictive path integral (MPPI) controller that uses the learned dynamics model to an MPPI controller that uses the analytic model, as well as to three additional baseline controllers. In the main closed-loop tracking experiments across four simulated environments, MPPI with learned dynamics achieves mean speeds closer to the target magnitudes and lower root-mean-square (RMS) hitch angles than MPPI with the analytic model at every tested setpoint, with higher completion rates in seven of eight reverse configurations.

0.21