CS Paper Radar

High-Speed Forward and Reverse Tractor-Trailer Driving with Learned Vehicle Dynamics

Aaron Chen, David Shen, Taekyung Kim, Kaleb Ben Naveed, Dimitra Panagou

cs.RO eess.SY ·submitted 2026-11-15 23:34 UTC · v1
code/data

Abstract

Tractor-trailer systems are difficult to control, especially unstable during reverse motion, and their dynamics depend on difficult-to-measure factors, including road friction and suspension coefficients. We introduce a learned dynamics model for tractor-trailer control and compare it with a reduced-order dynamics model with Fiala tire forces as an analytic baseline. Specifically, we compare a model predictive path integral (MPPI) controller that uses the learned dynamics model to an MPPI controller that uses the analytic model, as well as to three additional baseline controllers. In the main closed-loop tracking experiments across four simulated environments, MPPI with learned dynamics achieves mean speeds closer to the target magnitudes and lower root-mean-square (RMS) hitch angles than MPPI with the analytic model at every tested setpoint, with higher completion rates in seven of eight reverse configurations.

Comment
The first three authors contributed equally to this work. Project page: https://ds12a.github.io/drift-with-trailer/

Closest papers

Nearest neighbours by meaning across the whole index.

A Novel Path-Tracking Algorithm for Automated Tractor-Trailer Forward and Backward Maneuvers

cs.RO eess.SY ·2026-09-18 ·Alexandre Lombard, Florent Perronnet, Théo Rigal, Nicolas Gaud, Abdeljalil Abbas-Turki
similarity 0.74
Abstract

Fully autonomous tractor-trailer systems are increasingly deployed in logistics, agriculture, and industrial environments, where precise and robust path-tracking capabilities are essential. However, the articulation between the tractor and the trailer introduces additional nonlinearities and significantly complicates lateral and longitudinal control, particularly during reversing maneuvers. This paper introduces a novel path-tracking algorithm specifically designed for articulated vehicles with a single trailer. The proposed method combines a lateral control law applied at the trailer level with a short-horizon predictive adjustment of the tractor steering angle, ensuring stable convergence toward the desired path in both forward and backward motion. The approach is geometry-based and requires no per-vehicle calibration or training. Simulation studies in a high-fidelity physics simulator show steady-state or final lateral errors of $0.02$--$0.05$~m on straight-line, circular, and reverse docking trajectories, which is of the same order of magnitude as, or lower than, the errors reported in the literature. Real-world experiments on a small-scale tractor--trailer robot, with the whole controller running on a low-cost microcontroller, further confirm the feasibility of the approach, with lateral errors below 13~mm during repeated reverse docking maneuvers despite a pose detection latency of about 200~ms.

0.10

Vehicle Drift Emergence: Continuous Evolution from Grip Driving to the Handling Limit via Boundary Exploration Learning Model Predictive Control

cs.RO ·2026-08-28 ·Sheng Zhao, Binh-Minh Nguyen, Hangyu Lu, Xiaodong Wu
similarity 0.71
Abstract

Automated drift controllers commonly track a prescribed drift equilibrium, sideslip reference, or trajectory. These formulations establish how to execute drift, whereas the continuous transition from grip driving to drift near the handling limit remains unresolved. This paper defines drift emergence in a repetitive lap time minimization task, where neither the controller objective nor the reward contains an explicit drift reference. A boundary exploration learning model predictive controller (BE-LMPC) constructs an empirical safe set and a locally shifted terminal cost from completed laps. By iteratively improving spatial speed allocation under a fixed global speed bound, the controller progressively explores larger sideslip and yaw rate envelopes while preserving recoverability. As lap performance improves, sustained sideslip and pronounced yaw motion emerge while the rear axle approaches saturation. Analysis shows that, when external conditions vary smoothly, the transition from tire adhesion to sliding does not itself cause abrupt changes in tire force or vehicle state. The combined-slip Fiala model satisfies this continuity condition at the transition. At a tire road friction coefficient of 0.6, lap time decreases from 49.95 s on Lap~3 to 25.50 s on Lap~12, with drift first emerging on Lap~11. Lap~12 reaches 16.5$^\circ$ sideslip and 0.894 rear axle utilization. In contrast, no drift is detected for friction coefficients from 0.8 to 1.2; at 1.2, a similar peak speed is achieved with only 0.483 rear axle utilization. These results characterize drift as a conditional continuation of limit handling that emerges when increasing performance demand approaches the available tire capacity, rather than as a separately prescribed motion mode.

0.32

RAIBO-Wagon: Real-Time Navigation System for a Legged Robot Towing a Wagon

cs.RO ·2026-10-29 ·Insung Yang, Eunchae Kim, Jungwoo Hur, Seunghun Jeon, Donghyuk Choi +1 more
code/data similarity 0.65
Abstract · 19 pages, 13 figures, 5 tables. Project page: https://insungyang.github.io/raibo-wagon/

Legged robots have demonstrated advanced capabilities across a wide range of real-world tasks, yet much of this progress concerns the robot controlling only itself. Once the robot is coupled to an external object -- particularly an underactuated one -- the dynamics of the combined assembly become more complex. Towing a wagon is a common practical scenario, where coupled dynamics make reliable navigation challenging. This difficulty is amplified in confined spaces, where collision-free navigation requires finding a narrow set of feasible paths under strict real-time constraints. To address this, we propose a navigation framework that combines Conditional Flow Matching (CFM) with Model Predictive Path Integral (MPPI) control over a learned Forward Dynamics Model (FDM). The CFM model mitigates the initialization problem of MPPI and accelerates its convergence, while MPPI with the FDM recovers feasible solutions beyond the CFM model's training distribution by iterative refinement. We integrate the framework into a full-stack navigation system for RAIBO-Wagon, a quadruped towing a custom wagon, and validate it in real-world outdoor experiments on 15 m-long courses through confined spaces, with all sensing and computation performed fully onboard. The system achieves an 85% success rate across 40 trials, towing a total load of up to 40 kg -- nearly 100% of RAIBO's body weight.

0.39

LLA-MPC on Embedded Hardware: Rapid Adaptive Control with Thousands of Parallel Models

cs.RO eess.SY ·2026-10-02 ·Henry Z. Liao, Maitham F. AL-Sunni, John M. Dolan
publishedcode/data similarity 0.64
Abstract · This work has been accepted in the Sim2Real and Classical Control: From Rigorous Theory to Data-Driven Robotics Workshop at the 2026 IEEE/RS…

We present a generalized implementation of Look-Back and Look-Ahead Adaptive Model Predictive Control (LLA-MPC), a learning-free framework for real-time, rapid adaptive system identification and control. The original formulation was demonstrated only in simulation, for autonomous racing with a fixed model structure. Our implementation has modular dynamics and integrators, and we validate it on the F1TENTH platform under constrained computation and noisy state estimation. The system identifies tire parameters online by evaluating thousands of candidate models in real time on an embedded computer. Experiments with low-friction tires across changing surfaces show that LLA-MPC completes high-speed tracking tasks where a fixed nominal model fails. Code, videos, and our related work are available at: https://lla-control.github.io.

0.56

Wheel-loader V-Cycle Automation with Deep Koopman MPC

cs.RO eess.SY ·2026-09-22 ·Armin Abdolmohammadi, Navid Mojahed, Dinesh Kumar, Bahram Ravani, Shima Nazari
similarity 0.64
Abstract · 8 pages, 4 figure

The repeated forward-reverse maneuvers performed by wheel loaders during earthmoving operations make them well suited for automation. However, the nonlinear dynamics of articulated vehicles and complex vehicle-terrain interactions limit the effectiveness of conventional model-based approaches. This paper presents a hierarchical framework that combines long-horizon geometric planning with data-driven predictive control for autonomous wheel-loader operation. A reduced-order articulated kinematic model is used to generate the maneuver geometry, where the forward and reverse trajectories are jointly optimized through a shared intermediate state. To capture the vehicle dynamics, two data-driven deep bilinear Koopman models are learned for the forward and reverse motions using data generated from high-fidelity simulations in Algoryx Dynamics. The learned Koopman representations are subsequently incorporated into a computationally efficient model predictive control (MPC) formulation for trajectory tracking. The resulting controller operates in real time within a 50-ms execution loop. High-fidelity simulation results demonstrate that the proposed end-to-end framework enables accurate and computationally efficient execution of wheel-loader V-cycle maneuvers, providing a promising approach toward autonomous operation of articulated heavy-duty machinery.

0.26

A Probabilistic Lateral Motion Prediction Model with Improved Response Fidelity for Vehicle-in-the-Loop Simulation

cs.RO ·2026-11-16 ·Xiangyang Ye, Chaosheng Huang, Jinwen Yang, Zhengxian Chen, Jun Li
similarity 0.64
Abstract

Vehicle-in-the-loop (VIL) simulation requires a lateral dynamics model that accurately reproduces vehicle responses and reliably generates horizontal lateral-position and heading commands through recursive integration. This paper presents a probabilistic lateral motion prediction model with improved response fidelity. A two-degree-of-freedom vehicle model provides the physical prior, while a recurrent neural network learns correlated residual corrections to lateral acceleration and yaw rate. To maintain prediction fidelity during recursive motion generation, multistep rollout training feeds corrected responses into subsequent states and histories and directly penalizes accumulated lateral-velocity error. A conditional Gaussian characterizes response uncertainty, which is propagated to lateral-response, position, and heading predictions through augmented-state linearization. Evaluation results demonstrate improved lateral-response and integrated-motion prediction. Compared with the Deep Dynamics lateral adaptation, the proposed model reduces mean lateral-position root-mean-square error (RMSE) from 0.596 m to 0.483 m, an improvement of 19.0%, while reducing mean lateral-velocity RMSE from 0.0469 m/s to 0.0441 m/s. These results demonstrate the effectiveness of combining physical priors, probabilistic residual learning, and multistep rollout training for response-faithful lateral motion prediction.

0.29

Gray-Box Model Predictive Control for Articulated Dump Trucks via Gaussian Process Learning of Sideslip

cs.RO eess.SY ·2026-09-23 ·Arash Shahirpour, Jens Ahlers, Christopher Schulte, Tim Reuscher
similarity 0.62
Abstract · 7 Pages

The growing demand for automation in the mining industry, particularly for the autonomous operation of articulated dump trucks (ADTs), has drawn increased attention to accurate vehicle modeling. The importance of such models lies in their use in model predictive control (MPC), model-based estimation methods, and vehicle simulation. While dynamic modeling offers a viable solution for these purposes, it is associated with complex setup and parametrization and may require recalibration in changing operating environments. As a result, kinematic models have dominated ADT modeling, especially in MPCs, at the expense of reduced prediction accuracy. In this work, we propose an approach using Gaussian Process Regression (GPR) to learn the sideslip angle of the vehicle, which is identified as the primary contributor to the reduced accuracy of kinematic models. The learned GPR function is augmented into the kinematic model to form a gray-box model that aims to reduce the gap to dynamic models. We show that the gray-box model can predict the sideslip angle and, consequently, the vehicle's lateral velocity, thereby improving the MPC's prediction performance. The resulting gray-box MPC is compared against two white-box MPCs in a simulation environment. The results indicate an improvement in terms of maximum lateral tracking error from over 2 m to 0.56 m.

0.18

Physics-Informed Direct Data-Driven Gain-Scheduled Control for Improving the Extrapolation Performance of Vehicle Lateral Control

eess.SY ·2026-11-16 ·Shuichi Yahagi, Aoi Koyanagi, Ansei Yonezawa, Heisei Yonezawa, Hiroki Seto +2 more
similarity 0.61
Abstract

This paper proposes a physics-informed direct data-driven control (PI-D3C) framework for designing a gain-scheduled proportional-integral controller for vehicle yaw-rate tracking. Vehicle lateral dynamics vary depending on vehicle velocity, making it difficult for controllers designed using data collected over a limited operating range to maintain satisfactory control performance outside that range. We introduce a novel PI-D3C framework that integrates pure data-driven virtual reference feedback tuning (VRFT) with prior physical knowledge, thereby significantly improving extrapolation performance beyond the operating range covered by the collected data. In the proposed approach, the gain-scheduled controller parameters are designed based on both training data and the yaw-rate response predicted by the physics-based model. To evaluate the effectiveness of the proposed method, numerical simulations are conducted using co-simulation between MATLAB/Simulink and CarSim. The results demonstrate that the controller designed by pure VRFT achieves satisfactory tracking performance within the training velocity region but exhibits significant deterioration in tracking performance outside the training region. In contrast, the proposed controller maintains good yaw-rate tracking performance over a wider velocity range while suppressing excessive variations in the scheduled gains and steering input. These results indicate that incorporating prior physical knowledge into pure data-driven VRFT improves the extrapolation performance of gain-scheduled controllers designed using limited training data.

0.39