CS Paper Radar

A Probabilistic Lateral Motion Prediction Model with Improved Response Fidelity for Vehicle-in-the-Loop Simulation

Xiangyang Ye, Chaosheng Huang, Jinwen Yang, Zhengxian Chen, Jun Li

cs.RO ·submitted 2026-11-16 19:21 UTC · v1

Abstract

Vehicle-in-the-loop (VIL) simulation requires a lateral dynamics model that accurately reproduces vehicle responses and reliably generates horizontal lateral-position and heading commands through recursive integration. This paper presents a probabilistic lateral motion prediction model with improved response fidelity. A two-degree-of-freedom vehicle model provides the physical prior, while a recurrent neural network learns correlated residual corrections to lateral acceleration and yaw rate. To maintain prediction fidelity during recursive motion generation, multistep rollout training feeds corrected responses into subsequent states and histories and directly penalizes accumulated lateral-velocity error. A conditional Gaussian characterizes response uncertainty, which is propagated to lateral-response, position, and heading predictions through augmented-state linearization. Evaluation results demonstrate improved lateral-response and integrated-motion prediction. Compared with the Deep Dynamics lateral adaptation, the proposed model reduces mean lateral-position root-mean-square error (RMSE) from 0.596 m to 0.483 m, an improvement of 19.0%, while reducing mean lateral-velocity RMSE from 0.0469 m/s to 0.0441 m/s. These results demonstrate the effectiveness of combining physical priors, probabilistic residual learning, and multistep rollout training for response-faithful lateral motion prediction.

Closest papers

Nearest neighbours by meaning across the whole index.

CARE-Drive: Coupled Alternating Refinement for Ego-trajectories

cs.CV cs.AI ·2026-11-11 ·Xiao Ma, Yijun Chen, Zhiquan Hu, Jicheng Zhao, Ran Ji +2 more
similarity 0.66
Abstract

Vision-language-action (VLA) models bring multimodal understanding and world knowledge to end-to-end autonomous driving. To further improve the quality of predicted trajectories, existing studies introduce candidate refinement, residual denoising, and token correction. However, these methods typically focus on unified refinement of the entire trajectory, paying limited attention to the distinct physical quantities and their interactions. We further investigate physical specialization and coordination in trajectory refinement, centering on position and heading for simpler and more intuitive correction modeling. To this end, we propose CARE-Drive (Coupled Alternating Refinement for Ego-trajectories), which decomposes trajectory refinement into waypoint residual correction and position-conditioned heading generation. Through imitation learning and a future-token auxiliary task, the backbone provides predictive representations and a base trajectory. The position expert predicts bounded metric waypoint residuals, while the heading expert reconstructs vehicle orientation from adjacent angular increments conditioned on the corrected path. With the backbone frozen, the two experts are optimized alternately through supervised initialization and reinforcement fine-tuning. This design simplifies refinement through clear physical specialization while preserving conditional coupling during prediction and optimization. On NAVSIM v1, CARE-Drive achieves 88.8 PDMS, improving by 2.4 points over the unrefined base trajectories generated by the same backbone. Ablation studies further support the effectiveness of specialized experts and staged training.

0.12

High-Speed Forward and Reverse Tractor-Trailer Driving with Learned Vehicle Dynamics

cs.RO eess.SY ·2026-11-15 ·Aaron Chen, David Shen, Taekyung Kim, Kaleb Ben Naveed, Dimitra Panagou
code/data similarity 0.64
Abstract · The first three authors contributed equally to this work. Project page: https://ds12a.github.io/drift-with-trailer/

Tractor-trailer systems are difficult to control, especially unstable during reverse motion, and their dynamics depend on difficult-to-measure factors, including road friction and suspension coefficients. We introduce a learned dynamics model for tractor-trailer control and compare it with a reduced-order dynamics model with Fiala tire forces as an analytic baseline. Specifically, we compare a model predictive path integral (MPPI) controller that uses the learned dynamics model to an MPPI controller that uses the analytic model, as well as to three additional baseline controllers. In the main closed-loop tracking experiments across four simulated environments, MPPI with learned dynamics achieves mean speeds closer to the target magnitudes and lower root-mean-square (RMS) hitch angles than MPPI with the analytic model at every tested setpoint, with higher completion rates in seven of eight reverse configurations.

0.17

A Novel Path-Tracking Algorithm for Automated Tractor-Trailer Forward and Backward Maneuvers

cs.RO eess.SY ·2026-09-18 ·Alexandre Lombard, Florent Perronnet, Théo Rigal, Nicolas Gaud, Abdeljalil Abbas-Turki
similarity 0.62
Abstract

Fully autonomous tractor-trailer systems are increasingly deployed in logistics, agriculture, and industrial environments, where precise and robust path-tracking capabilities are essential. However, the articulation between the tractor and the trailer introduces additional nonlinearities and significantly complicates lateral and longitudinal control, particularly during reversing maneuvers. This paper introduces a novel path-tracking algorithm specifically designed for articulated vehicles with a single trailer. The proposed method combines a lateral control law applied at the trailer level with a short-horizon predictive adjustment of the tractor steering angle, ensuring stable convergence toward the desired path in both forward and backward motion. The approach is geometry-based and requires no per-vehicle calibration or training. Simulation studies in a high-fidelity physics simulator show steady-state or final lateral errors of $0.02$--$0.05$~m on straight-line, circular, and reverse docking trajectories, which is of the same order of magnitude as, or lower than, the errors reported in the literature. Real-world experiments on a small-scale tractor--trailer robot, with the whole controller running on a low-cost microcontroller, further confirm the feasibility of the approach, with lateral errors below 13~mm during repeated reverse docking maneuvers despite a pose detection latency of about 200~ms.

0.10

RACER: Residual-Adaptive Closed-Loop Estimation for Sampling-Based Planning in Wheeled-Quadruped Racing

cs.RO ·2026-10-05 ·Yuxiang Liu, Marla Eisman, Lizhi Yang, Aaron Ames, Francesco Borrelli
similarity 0.62
Abstract

We present RACER, a hierarchical control framework for wheel-based quadruped racing that combines an MPPI planner with a learned residual dynamics model and a low-level RL velocity tracker. The planner augments a nominal unicycle kinematic model with a neural residual term to capture the closed-loop tracking behavior of the RL policy. To train this residual model under limited real-world data, we propose Low-Rank Residual Adaptation (LoRRA), a two-stage approach that pre-trains on large-scale simulation data for broad coverage and then fine-tunes on a small real-world dataset with a low-rank constraint. In simulation, we empirically validate our engineering choices by showing (A) Residual dynamics improve the overall performance of our pipeline by capturing the tracking error of RL velocity tracker at high-speed cornering. (B) Residual dynamics trained with both source-domain and target-domain data gives racing performance significantly better than the residual dynamics trained with only target-domain data. (C) Low-rank constraint at target-domain adaptation gives higher success rates and higher performance than full-tune and from-scratch when domain gap in ground coefficient or joint gain increases.

0.23

Gray-Box Model Predictive Control for Articulated Dump Trucks via Gaussian Process Learning of Sideslip

cs.RO eess.SY ·2026-09-23 ·Arash Shahirpour, Jens Ahlers, Christopher Schulte, Tim Reuscher
similarity 0.62
Abstract · 7 Pages

The growing demand for automation in the mining industry, particularly for the autonomous operation of articulated dump trucks (ADTs), has drawn increased attention to accurate vehicle modeling. The importance of such models lies in their use in model predictive control (MPC), model-based estimation methods, and vehicle simulation. While dynamic modeling offers a viable solution for these purposes, it is associated with complex setup and parametrization and may require recalibration in changing operating environments. As a result, kinematic models have dominated ADT modeling, especially in MPCs, at the expense of reduced prediction accuracy. In this work, we propose an approach using Gaussian Process Regression (GPR) to learn the sideslip angle of the vehicle, which is identified as the primary contributor to the reduced accuracy of kinematic models. The learned GPR function is augmented into the kinematic model to form a gray-box model that aims to reduce the gap to dynamic models. We show that the gray-box model can predict the sideslip angle and, consequently, the vehicle's lateral velocity, thereby improving the MPC's prediction performance. The resulting gray-box MPC is compared against two white-box MPCs in a simulation environment. The results indicate an improvement in terms of maximum lateral tracking error from over 2 m to 0.56 m.

0.18

Learned versus Kinematic Trajectory Prediction under Reduced Observation Frequency

cs.LG cs.RO ·2026-11-17 ·Nukhbala Gadzhiev, Alexander Morochko
code/data similarity 0.61
Abstract · 8 pages, 1 figure, 2 tables. Code and per-scenario results: https://github.com/nleaxy/learned-vs-kinematic-trajectory-prediction

Trajectory prediction models for automated driving are usually trained on data with a fixed sampling frequency, while positions received via vehicle-to-everything (V2X) communication arrive at 1-10 Hz. We study whether a learned predictor that uses only the observation history keeps its advantage over constant velocity (CV) and constant acceleration (CA) models when the history frequency drops. On the Argoverse 2 motion forecasting dataset, the 5 s history of the focal agent was downsampled from 10 Hz to 5, 2, and 1 Hz, and the 6 s future was predicted without maps or neighboring agents. An LSTM-based recurrent neural network (RNN) trained for each frequency was compared with the same network trained at 10 Hz and applied to sparse histories after linear interpolation. Hypotheses and thresholds were fixed before training, the main RNNs were trained with ten seeds each, and results on 24,984 test scenarios have bootstrap confidence intervals over scenarios and seeds. The average displacement error of the frequency-specific RNN grew by 3.1% at 5 Hz, 10.1% at 2 Hz, and 20.3% at 1 Hz. Contrary to our hypothesis, its advantage over the better kinematic model did not vanish on straight motion and was 24-30% on both straight motion and turns at every frequency, while for pedestrians CV was more accurate. The 10 Hz model with interpolation was at most 1.3% less accurate than the frequency-specific model down to 2 Hz but 11.5% less accurate at 1 Hz. Each hypothesis was only partly supported.

0.48

Sideslip-Conditioned Drift Trajectory Planning with Flow Matching and Control Barrier Functions

cs.RO ·2026-11-17 ·Seokjun Lee, Seung-Hyun Kong
hot direction similarity 0.61
Abstract · 8 pages, 4 figures, 3 tables. Under review. Demonstration video: https://youtu.be/nskukDD1MFg

Drifting, the deliberate control of a vehicle at large sideslip angles, is relevant to both motorsport and recovery from unexpected oversteer. Existing autonomous drifting methods typically determine drift intensity through predefined reference trajectories, optimization objectives, or learned policy rewards, rather than accepting a desired sideslip angle as an explicit input. We propose, to the best of our knowledge, the first generative drift trajectory planner explicitly conditioned on a requested peak sideslip angle. A conditional flow matching model is trained on demonstrated drift laps with hindsight-derived sideslip labels and refined through reinforcement fine-tuning. A control barrier function (CBF) correction is then applied to satisfy model-based road, tire friction, and actuator constraints at the planning waypoints. In closed-loop experiments in the racing simulator Assetto Corsa, a nonlinear model predictive controller tracks the generated plans for six requested sideslip angles from 20 deg to 45 deg, with 30 laps (approximately 75 km) per request. The median peak sideslip angle measured across drift-corner passes follows the requested angle, with a mean absolute error of 1.2 deg across the six conditions. Ablation experiments show that reinforcement fine-tuning improves conditioning accuracy, while CBF correction substantially reduces off-road and spin events.

0.44

Cross-Vehicle Transferability of Lateral Velocity Estimation on Production Vehicles through Input Selection and Data Augmentation

eess.SY cs.LG ·2026-11-18 ·Hendrik Schäfke, Simon F. G. Ehlers, Thomas Seel, Askar Vagapov, Christoph Schweers +2 more
similarity 0.60
Abstract · 14 pages, 7 figures, 6 tables. Submitted to Control Engineering Practice

Lateral velocity is safety-critical for vehicle-dynamics control but cannot be measured with production sensors. Model-based estimators such as Kalman filters are established, whereas data-driven estimators are more accurate within the training regime but suspected to lose accuracy beyond it. Their transfer to a structurally different vehicle has rarely been tested. We record real-world test drives of three series-production vehicles, train a neural-network estimator on production CAN signals of a compact car, and evaluate it zero-shot on an SUV and a van against a GNSS-aided inertial reference. On the unseen vehicles, the network's error exceeds that on the training vehicle by an order of magnitude, a gap not quantified on production vehicles before. A systematic comparison of input sets from ten production CAN signals identifies a five-signal set that transfers most robustly. To narrow this gap, we introduce three physically motivated augmentations of training data. Two improve generalization, namely exploiting the vehicle's left-right symmetry and emulating accelerometer bias. Combined, they reduce the error on the validation maneuvers of the SUV and van by 13% and 15%. Contrary to common expectation, on the SUV the data-driven estimator trained with both augmentations matches a model-based estimator tuned on the same training data.

0.35