CS Paper Radar

Gray-Box Model Predictive Control for Articulated Dump Trucks via Gaussian Process Learning of Sideslip

Arash Shahirpour, Jens Ahlers, Christopher Schulte, Tim Reuscher

cs.RO eess.SY ·submitted 2026-09-23 09:11 UTC · v1

Abstract

The growing demand for automation in the mining industry, particularly for the autonomous operation of articulated dump trucks (ADTs), has drawn increased attention to accurate vehicle modeling. The importance of such models lies in their use in model predictive control (MPC), model-based estimation methods, and vehicle simulation. While dynamic modeling offers a viable solution for these purposes, it is associated with complex setup and parametrization and may require recalibration in changing operating environments. As a result, kinematic models have dominated ADT modeling, especially in MPCs, at the expense of reduced prediction accuracy. In this work, we propose an approach using Gaussian Process Regression (GPR) to learn the sideslip angle of the vehicle, which is identified as the primary contributor to the reduced accuracy of kinematic models. The learned GPR function is augmented into the kinematic model to form a gray-box model that aims to reduce the gap to dynamic models. We show that the gray-box model can predict the sideslip angle and, consequently, the vehicle's lateral velocity, thereby improving the MPC's prediction performance. The resulting gray-box MPC is compared against two white-box MPCs in a simulation environment. The results indicate an improvement in terms of maximum lateral tracking error from over 2 m to 0.56 m.

Comment
7 Pages

Closest papers

Nearest neighbours by meaning across the whole index.

Learning Agent-based Model Predictive Control for Holistic Vehicle Performance

cs.RO ·2026-09-10 ·Jiaming Zhong, Reza Valiollahi Mehrizi, Mohammad Pirani, Chao Yu, Alireza Kasaiezadeh +2 more
top venue similarity 0.64
Abstract · 12 pages. Author accepted manuscript

Agent-based model predictive control (AMPC) has recently been proposed as a distributed scheme that collaborates with all agents to achieve optimal holistic performance. However, its optimality highly depends on the prediction accuracy that requires all agents or their contributions to be known, which is too idealistic for actual implementation. This research proposes a novel practical hybrid control scheme - learning agent-based MPC (LAMPC), combining the model-based AMPC approach and data-based learning methods to improve the holistic vehicle performance for multi-agent systems. The Gaussian process regression (GPR) enhanced by an online data management strategy serves as the learning core to predict unknown contributions. A novel multi-step prediction mechanism leverages the GPR learning potential along the horizon. The predicted mean, representing the learned unknown contributions, completes the system model in the MPC for more accurate control. Meanwhile, a stochastic framework is formulated to guarantee control safety and feasibility using soft chance constraints based on the prediction variance. Both simulations and experiments show that, with the learning capability, LAMPC outperforms the traditional AMPC. LAMPC can achieve higher tracking performance in well-learned scenarios and always guarantee constraint satisfaction even in less-learned scenarios. Moreover, the proposed hybrid control scheme is efficient for real-time implementation and is flexible to any control agent topology.

0.66

Wheel-loader V-Cycle Automation with Deep Koopman MPC

cs.RO eess.SY ·2026-09-22 ·Armin Abdolmohammadi, Navid Mojahed, Dinesh Kumar, Bahram Ravani, Shima Nazari
similarity 0.63
Abstract · 8 pages, 4 figure

The repeated forward-reverse maneuvers performed by wheel loaders during earthmoving operations make them well suited for automation. However, the nonlinear dynamics of articulated vehicles and complex vehicle-terrain interactions limit the effectiveness of conventional model-based approaches. This paper presents a hierarchical framework that combines long-horizon geometric planning with data-driven predictive control for autonomous wheel-loader operation. A reduced-order articulated kinematic model is used to generate the maneuver geometry, where the forward and reverse trajectories are jointly optimized through a shared intermediate state. To capture the vehicle dynamics, two data-driven deep bilinear Koopman models are learned for the forward and reverse motions using data generated from high-fidelity simulations in Algoryx Dynamics. The learned Koopman representations are subsequently incorporated into a computationally efficient model predictive control (MPC) formulation for trajectory tracking. The resulting controller operates in real time within a 50-ms execution loop. High-fidelity simulation results demonstrate that the proposed end-to-end framework enables accurate and computationally efficient execution of wheel-loader V-cycle maneuvers, providing a promising approach toward autonomous operation of articulated heavy-duty machinery.

0.26

High-Speed Forward and Reverse Tractor-Trailer Driving with Learned Vehicle Dynamics

cs.RO eess.SY ·2026-11-15 ·Aaron Chen, David Shen, Taekyung Kim, Kaleb Ben Naveed, Dimitra Panagou
code/data similarity 0.62
Abstract · The first three authors contributed equally to this work. Project page: https://ds12a.github.io/drift-with-trailer/

Tractor-trailer systems are difficult to control, especially unstable during reverse motion, and their dynamics depend on difficult-to-measure factors, including road friction and suspension coefficients. We introduce a learned dynamics model for tractor-trailer control and compare it with a reduced-order dynamics model with Fiala tire forces as an analytic baseline. Specifically, we compare a model predictive path integral (MPPI) controller that uses the learned dynamics model to an MPPI controller that uses the analytic model, as well as to three additional baseline controllers. In the main closed-loop tracking experiments across four simulated environments, MPPI with learned dynamics achieves mean speeds closer to the target magnitudes and lower root-mean-square (RMS) hitch angles than MPPI with the analytic model at every tested setpoint, with higher completion rates in seven of eight reverse configurations.

0.17

A Probabilistic Lateral Motion Prediction Model with Improved Response Fidelity for Vehicle-in-the-Loop Simulation

cs.RO ·2026-11-16 ·Xiangyang Ye, Chaosheng Huang, Jinwen Yang, Zhengxian Chen, Jun Li
similarity 0.62
Abstract

Vehicle-in-the-loop (VIL) simulation requires a lateral dynamics model that accurately reproduces vehicle responses and reliably generates horizontal lateral-position and heading commands through recursive integration. This paper presents a probabilistic lateral motion prediction model with improved response fidelity. A two-degree-of-freedom vehicle model provides the physical prior, while a recurrent neural network learns correlated residual corrections to lateral acceleration and yaw rate. To maintain prediction fidelity during recursive motion generation, multistep rollout training feeds corrected responses into subsequent states and histories and directly penalizes accumulated lateral-velocity error. A conditional Gaussian characterizes response uncertainty, which is propagated to lateral-response, position, and heading predictions through augmented-state linearization. Evaluation results demonstrate improved lateral-response and integrated-motion prediction. Compared with the Deep Dynamics lateral adaptation, the proposed model reduces mean lateral-position root-mean-square error (RMSE) from 0.596 m to 0.483 m, an improvement of 19.0%, while reducing mean lateral-velocity RMSE from 0.0469 m/s to 0.0441 m/s. These results demonstrate the effectiveness of combining physical priors, probabilistic residual learning, and multistep rollout training for response-faithful lateral motion prediction.

0.29

A Novel Path-Tracking Algorithm for Automated Tractor-Trailer Forward and Backward Maneuvers

cs.RO eess.SY ·2026-09-18 ·Alexandre Lombard, Florent Perronnet, Théo Rigal, Nicolas Gaud, Abdeljalil Abbas-Turki
similarity 0.61
Abstract

Fully autonomous tractor-trailer systems are increasingly deployed in logistics, agriculture, and industrial environments, where precise and robust path-tracking capabilities are essential. However, the articulation between the tractor and the trailer introduces additional nonlinearities and significantly complicates lateral and longitudinal control, particularly during reversing maneuvers. This paper introduces a novel path-tracking algorithm specifically designed for articulated vehicles with a single trailer. The proposed method combines a lateral control law applied at the trailer level with a short-horizon predictive adjustment of the tractor steering angle, ensuring stable convergence toward the desired path in both forward and backward motion. The approach is geometry-based and requires no per-vehicle calibration or training. Simulation studies in a high-fidelity physics simulator show steady-state or final lateral errors of $0.02$--$0.05$~m on straight-line, circular, and reverse docking trajectories, which is of the same order of magnitude as, or lower than, the errors reported in the literature. Real-world experiments on a small-scale tractor--trailer robot, with the whole controller running on a low-cost microcontroller, further confirm the feasibility of the approach, with lateral errors below 13~mm during repeated reverse docking maneuvers despite a pose detection latency of about 200~ms.

0.10

Learning-Based Predictive Control Method for Vehicle Lateral Control with a Multi-Step Gaussian Process Regression Prediction

eess.SY ·2026-10-01 ·Hasan Zakeri, Baisravan HomChaudhuri
similarity 0.60
Abstract · 10 pages, 11 figures

We introduce a novel approach to model predictive control that incorporates multi-step uncertainty prediction for safely controlling systems characterized by uncertainties dependent on both state and control variables. The discrepancy between real-world systems and their control-oriented representations arises from inherent uncertainties, which frequently correlate with state and control variables, a common occurrence in modeling errors. As these uncertainties accumulate and propagate over time, they can produce substantial deviations over extended horizons, potentially compromising the integrity of safety-critical applications. Although existing stochastic control frameworks can maintain system operation within safety boundaries at specified confidence levels, they necessitate accurate prediction of state distributions throughout the control horizon. This prediction represents a significant challenge for systems where uncertainties vary with state and control inputs. Our contribution addresses this challenge through a Model Predictive Controller leveraging multi-step Gaussian Process Regression to capture and anticipate uncertainties that are state- and control-dependent. We further propose an iterative solution to the optimization problem in our MPC framework and discuss the convergence of the algorithm. To demonstrate the method in a practical application, we conduct an in-depth analysis of vehicle lateral control, particularly during lane-changing maneuvers, examining how errors propagate through the system model. The effectiveness of our proposed methodology is validated through comprehensive simulations.

0.25

Gaussian Process-Augmented Model Predictive Contouring Control for 6-DoF Trajectory Tracking with a Holonomic AUV

cs.RO ·2026-11-10 ·David Dörner, Giancarlo Troni, Ignacio Torroba, Ivan Stenius
similarity 0.60
Abstract · 8 pages, 8 figures

Small, holonomic Autonomous Underwater Vehicles (AUVs) enable close-range inspection of underwater structures from arbitrary viewpoints, requiring accurate position and attitude tracking under state and input constraints. Model Predictive Contouring Control (MPCC) naturally handles these requirements, but relies on an accurate dynamics model, which is difficult to obtain underwater. In this paper, we present a nonlinear MPCC in all six Degrees of Freedom (DoF) for a holonomic AUV and alleviate the inaccuracies in the dynamics by augmenting the nominal model employed with residual dynamics learned via Gaussian Process (GP) regression. The learned residual is embedded in the optimal control problem through a zero-order robust optimization scheme, which keeps the controller real-time capable at 25 Hz. A simulation ablation shows that residual selection is essential when designing the controller, and simulation and in-water experiments with the Multimodality, Observing, Low-cost, Agile (MOLA) AUV validate the resulting controllers against a nominal MPCC and a field proven Proportional-Integral-Derivative (PID) controller.

0.30

Task-Oriented Active Learning of Residual Dynamics for Model Predictive Path Integral Control

cs.RO eess.SY ·2026-09-16 ·Nobuaki Aoki, Hojin Lee, Stefan Sosnowski, Sandra Hirche
similarity 0.58
Abstract

Online residual learning can reduce model mismatch in predictive control, but passive data collection may fail to adequately cover states that become important later in the task. Task-agnostic active learning targets uncertain or informative regions, but information acquired in such regions does not necessarily improve task performance. This paper introduces Task-Oriented Information Acquisition (ToIA), an active-learning criterion for model predictive path integral control (MPPI) with online Gaussian process (GP) residual learning. For each sampled control sequence, ToIA estimates how much an observation obtained early in the rollout would reduce predictive uncertainty at later states on the same rollout, and weights this reduction by the rollout's relevance to the task. The score is evaluated over the existing MPPI rollout batch without sampling future observations or re-optimizing control under hypothetical posterior updates. In simulated off-road navigation across held-out maps with heterogeneous terrain, ToIA improved the goal-reaching success rate over passive GP learning by 19.3 and 27.4 percentage points and outperformed task-agnostic active-learning baselines across dense and sparse online-learning intervals. An ablation study indicates that task relevance is particularly important under sparse model updates. The implementation supports online control at 20 Hz on an NVIDIA RTX 2080 Ti.

0.26