CS Paper Radar

A Novel Path-Tracking Algorithm for Automated Tractor-Trailer Forward and Backward Maneuvers

Alexandre Lombard, Florent Perronnet, Théo Rigal, Nicolas Gaud, Abdeljalil Abbas-Turki

cs.RO eess.SY ·submitted 2026-09-18 12:53 UTC · v3

Abstract

Fully autonomous tractor-trailer systems are increasingly deployed in logistics, agriculture, and industrial environments, where precise and robust path-tracking capabilities are essential. However, the articulation between the tractor and the trailer introduces additional nonlinearities and significantly complicates lateral and longitudinal control, particularly during reversing maneuvers. This paper introduces a novel path-tracking algorithm specifically designed for articulated vehicles with a single trailer. The proposed method combines a lateral control law applied at the trailer level with a short-horizon predictive adjustment of the tractor steering angle, ensuring stable convergence toward the desired path in both forward and backward motion. The approach is geometry-based and requires no per-vehicle calibration or training. Simulation studies in a high-fidelity physics simulator show steady-state or final lateral errors of $0.02$--$0.05$~m on straight-line, circular, and reverse docking trajectories, which is of the same order of magnitude as, or lower than, the errors reported in the literature. Real-world experiments on a small-scale tractor--trailer robot, with the whole controller running on a low-cost microcontroller, further confirm the feasibility of the approach, with lateral errors below 13~mm during repeated reverse docking maneuvers despite a pose detection latency of about 200~ms.

Closest papers

Nearest neighbours by meaning across the whole index.

High-Speed Forward and Reverse Tractor-Trailer Driving with Learned Vehicle Dynamics

cs.RO eess.SY ·2026-11-15 ·Aaron Chen, David Shen, Taekyung Kim, Kaleb Ben Naveed, Dimitra Panagou
code/data similarity 0.74
Abstract · The first three authors contributed equally to this work. Project page: https://ds12a.github.io/drift-with-trailer/

Tractor-trailer systems are difficult to control, especially unstable during reverse motion, and their dynamics depend on difficult-to-measure factors, including road friction and suspension coefficients. We introduce a learned dynamics model for tractor-trailer control and compare it with a reduced-order dynamics model with Fiala tire forces as an analytic baseline. Specifically, we compare a model predictive path integral (MPPI) controller that uses the learned dynamics model to an MPPI controller that uses the analytic model, as well as to three additional baseline controllers. In the main closed-loop tracking experiments across four simulated environments, MPPI with learned dynamics achieves mean speeds closer to the target magnitudes and lower root-mean-square (RMS) hitch angles than MPPI with the analytic model at every tested setpoint, with higher completion rates in seven of eight reverse configurations.

0.17

Multi-Reference Path Tracking Control for an Agricultural Tractor with Nonlinear Model Predictive Control

cs.RO ·2026-09-04 ·Marcel Moll, Timo Oksanen
similarity 0.71
Abstract

Guiding a tractor along a predefined reference path is a key component of precision agriculture. This study develops a path tracking controller based on Nonlinear Model Predictive Control, which incorporates multiple segments of a piecewise-linear reference path directly into the objective function. In addition, methods for selecting viable reference segments from the full path are presented. The control system is evaluated during a field test with a tractor controlled via the Tractor Implement Management steering interface. The NMPC solver converged on average after 3.45 ms and tracked the curved reference path with a mean absolute cross-track error of 6.1 cm.

0.28

Identification of the Steering and Speed Systems of a Four-Wheel-Steering Tractor for Optimal Control

eess.SY ·2026-09-04 ·Riikka Soitinaho, Timo Oksanen
similarity 0.63
Abstract

Model-based control design requires sufficiently accurate model of the system-to-be-controlled. This paper addresses the system identification of steering and speed control of a four-wheel-steering agricultural tractor for the purpose of developing path tracking control. To this end, we investigate the steering and speed control systems of the tractor. These are complex systems with digital, mechatronic, and hydraulic components challenging to model based on first principles. We take a data-driven approach to estimating the system models. The resulting model combines the kinematic model of the vehicle, actuators modelled as first-order systems, and estimated values for time constants and transport delays.

0.32

A Probabilistic Lateral Motion Prediction Model with Improved Response Fidelity for Vehicle-in-the-Loop Simulation

cs.RO ·2026-11-16 ·Xiangyang Ye, Chaosheng Huang, Jinwen Yang, Zhengxian Chen, Jun Li
similarity 0.62
Abstract

Vehicle-in-the-loop (VIL) simulation requires a lateral dynamics model that accurately reproduces vehicle responses and reliably generates horizontal lateral-position and heading commands through recursive integration. This paper presents a probabilistic lateral motion prediction model with improved response fidelity. A two-degree-of-freedom vehicle model provides the physical prior, while a recurrent neural network learns correlated residual corrections to lateral acceleration and yaw rate. To maintain prediction fidelity during recursive motion generation, multistep rollout training feeds corrected responses into subsequent states and histories and directly penalizes accumulated lateral-velocity error. A conditional Gaussian characterizes response uncertainty, which is propagated to lateral-response, position, and heading predictions through augmented-state linearization. Evaluation results demonstrate improved lateral-response and integrated-motion prediction. Compared with the Deep Dynamics lateral adaptation, the proposed model reduces mean lateral-position root-mean-square error (RMSE) from 0.596 m to 0.483 m, an improvement of 19.0%, while reducing mean lateral-velocity RMSE from 0.0469 m/s to 0.0441 m/s. These results demonstrate the effectiveness of combining physical priors, probabilistic residual learning, and multistep rollout training for response-faithful lateral motion prediction.

0.29

Steering Through Contact: A Finite-Support Motion Model for Single-Track Center-Articulated Robots

cs.RO ·2026-09-20 ·Mohamed Dhia Ounally, Nicolas Samson, Mathis Turgeon-Roy, Veronica Vannini, Johann Laconte +1 more
similarity 0.62
Abstract · 8 pages, 7 figures, 1 table

Trajectory planning and control in field robotics rely on predicting how propulsion and steering affect vehicle motion when contact points undergo slip. For articulated vehicles, the point-contact kinematic model (PCK) accounts for the linkage geometry but neglects the rotational resistance distributed along the contacts. We propose a finite-support quadratic model (FSQ) for single-track, center-articulated vehicles that incorporates this resistance through a quasi-static balance of lateral slip. Our approach generalizes the standard PCK formulation by relaxing the contact-point assumption. An exact reduction of the quadratic slip cost to contact moments gives a compact closed-form solution for real-time prediction of lateral velocity and yaw rate. We evaluate the proposed method in real-world experiments across asphalt, grass, ice, and mixed routes, using more than 7 km of data. For five-second predictions, FSQ reduces the weighted median translation and yaw errors by 53.5% and 68.9%, respectively, relative to PCK.

0.29

Gray-Box Model Predictive Control for Articulated Dump Trucks via Gaussian Process Learning of Sideslip

cs.RO eess.SY ·2026-09-23 ·Arash Shahirpour, Jens Ahlers, Christopher Schulte, Tim Reuscher
similarity 0.61
Abstract · 7 Pages

The growing demand for automation in the mining industry, particularly for the autonomous operation of articulated dump trucks (ADTs), has drawn increased attention to accurate vehicle modeling. The importance of such models lies in their use in model predictive control (MPC), model-based estimation methods, and vehicle simulation. While dynamic modeling offers a viable solution for these purposes, it is associated with complex setup and parametrization and may require recalibration in changing operating environments. As a result, kinematic models have dominated ADT modeling, especially in MPCs, at the expense of reduced prediction accuracy. In this work, we propose an approach using Gaussian Process Regression (GPR) to learn the sideslip angle of the vehicle, which is identified as the primary contributor to the reduced accuracy of kinematic models. The learned GPR function is augmented into the kinematic model to form a gray-box model that aims to reduce the gap to dynamic models. We show that the gray-box model can predict the sideslip angle and, consequently, the vehicle's lateral velocity, thereby improving the MPC's prediction performance. The resulting gray-box MPC is compared against two white-box MPCs in a simulation environment. The results indicate an improvement in terms of maximum lateral tracking error from over 2 m to 0.56 m.

0.18

Inertial Steering and Motion Prediction of Tracked Vehicles on Low-Adherence Surfaces

cs.RO eess.SY ·2026-10-28 ·Mathis Turgeon-Roy, Mohamed Ounally, Veronica Vannini, Olivier Roy, François Pomerleau
similarity 0.61
Abstract

Tracked vehicles are widely used in off-road applications, but their conventional motion models often rely on no-slip assumptions that become inaccurate on low-adherence surfaces. Rather than treating inertial effects arising from slip as a disturbance to be minimized, this work investigates how inertial effects arising from a moving mass can be deliberately exploited for steering on low-friction surfaces. A dynamic model for an articulated tracked vehicle with a passive trailer is developed, allowing inertial effects from trailer motion to be captured. The approach is experimentally evaluated on ice, where our dynamic model outperforms the kinematic baseline. We also propose a mixed dynamic-kinematic model to adapt predictions to both surface and situation by exploiting predictions from both methods. Finally, we demonstrate inertial steering on a mono-track vehicle without a conventional steering mechanism, showing that controlled movements of an internal mass can generate turning motion on ice. The resulting behavior can be predicted using the proposed dynamic model by representing the internal mass as a frictionless trailer, revealing the analogous dynamics between the two configurations. These results demonstrate the feasibility of inertial steering as an alternative steering mechanism for tracked vehicles operating in low-adherence environments.

0.21

Integrated Longitudinal and Lateral Control for High-Speed Platooning of Articulated Vehicles

cs.RO eess.SY ·2026-10-21 ·Aashish Shaju, Steve Southward, Mehdi Ahmadian
published similarity 0.61
Abstract · Original manuscript of an article published in Vehicle System Dynamics on September 20, 2026. Published version: https://doi.org/10.1080/004…

This paper presents an integrated control framework for high-speed platooning of articulated vehicles, combining advanced longitudinal and lateral control strategies to address the challenges of safe and efficient autonomous driving. A novel proof of string stability for the proposed longitudinal control algorithm, based on a PID framework, ensures robust inter-vehicle distance regulation even under dynamic operating conditions. Additionally, an arc-length-based longitudinal error formulation enhances the applicability of the control system for curved roads, making it realistic for diverse driving scenarios. For lateral control, significant improvements to the clothoid-based path tracking algorithm are introduced to mitigate oscillations and enhance stability at high speeds. These enhancements include a tangential criterion for oscillation reduction, trajectory segment classification for adaptive lookahead distance tuning, a dual-adaptive mechanism for regulating the rate of lookahead distance adjustments based on both cross-track error (CTE) and anticipated road curvature, and extensions for articulated vehicle dynamics. The proposed integrated control framework is validated through simulations, demonstrating its effectiveness in maintaining stability, minimizing tracking errors, and ensuring robust performance in high-speed and challenging platooning scenarios.

0.41