CS Paper Radar

Sideslip-Conditioned Drift Trajectory Planning with Flow Matching and Control Barrier Functions

Seokjun Lee, Seung-Hyun Kong

cs.RO ·submitted 2026-11-17 15:25 UTC · v1
hot direction

Abstract

Drifting, the deliberate control of a vehicle at large sideslip angles, is relevant to both motorsport and recovery from unexpected oversteer. Existing autonomous drifting methods typically determine drift intensity through predefined reference trajectories, optimization objectives, or learned policy rewards, rather than accepting a desired sideslip angle as an explicit input. We propose, to the best of our knowledge, the first generative drift trajectory planner explicitly conditioned on a requested peak sideslip angle. A conditional flow matching model is trained on demonstrated drift laps with hindsight-derived sideslip labels and refined through reinforcement fine-tuning. A control barrier function (CBF) correction is then applied to satisfy model-based road, tire friction, and actuator constraints at the planning waypoints. In closed-loop experiments in the racing simulator Assetto Corsa, a nonlinear model predictive controller tracks the generated plans for six requested sideslip angles from 20 deg to 45 deg, with 30 laps (approximately 75 km) per request. The median peak sideslip angle measured across drift-corner passes follows the requested angle, with a mean absolute error of 1.2 deg across the six conditions. Ablation experiments show that reinforcement fine-tuning improves conditioning accuracy, while CBF correction substantially reduces off-road and spin events.

Comment
8 pages, 4 figures, 3 tables. Under review. Demonstration video: https://youtu.be/nskukDD1MFg

Closest papers

Nearest neighbours by meaning across the whole index.

Vehicle Drift Emergence: Continuous Evolution from Grip Driving to the Handling Limit via Boundary Exploration Learning Model Predictive Control

cs.RO ·2026-08-28 ·Sheng Zhao, Binh-Minh Nguyen, Hangyu Lu, Xiaodong Wu
similarity 0.74
Abstract

Automated drift controllers commonly track a prescribed drift equilibrium, sideslip reference, or trajectory. These formulations establish how to execute drift, whereas the continuous transition from grip driving to drift near the handling limit remains unresolved. This paper defines drift emergence in a repetitive lap time minimization task, where neither the controller objective nor the reward contains an explicit drift reference. A boundary exploration learning model predictive controller (BE-LMPC) constructs an empirical safe set and a locally shifted terminal cost from completed laps. By iteratively improving spatial speed allocation under a fixed global speed bound, the controller progressively explores larger sideslip and yaw rate envelopes while preserving recoverability. As lap performance improves, sustained sideslip and pronounced yaw motion emerge while the rear axle approaches saturation. Analysis shows that, when external conditions vary smoothly, the transition from tire adhesion to sliding does not itself cause abrupt changes in tire force or vehicle state. The combined-slip Fiala model satisfies this continuity condition at the transition. At a tire road friction coefficient of 0.6, lap time decreases from 49.95 s on Lap~3 to 25.50 s on Lap~12, with drift first emerging on Lap~11. Lap~12 reaches 16.5$^\circ$ sideslip and 0.894 rear axle utilization. In contrast, no drift is detected for friction coefficients from 0.8 to 1.2; at 1.2, a similar peak speed is achieved with only 0.483 rear axle utilization. These results characterize drift as a conditional continuation of limit handling that emerges when increasing performance demand approaches the available tire capacity, rather than as a separately prescribed motion mode.

0.32

Race to Recovery: Designing Advanced Safety Systems for Autonomous Driving via Learning Autonomous Racing

cs.RO ·2026-10-14 ·Teodor Ilie, Kleber Cabral, Sidney Givigi
similarity 0.71
Abstract · 13 pages, 6 figures, 8 tables. Submitted to IEEE Transactions on Intelligent Vehicles

Vehicles that lose control at the handling limit through icing, hydroplaning, or an abrupt evasive maneuver fall outside the operating envelope of production safety systems such as electronic stability control, which focus on preventing instability rather than recovering from it. Expert drivers regain authority in these conditions by drifting. Existing autonomous recovery approaches are validated on idealized scenarios, define "recovered" states empirically and inconsistently, or rely on offline-planned trajectories rather than acting online. We address these gaps by first training a racing policy with reinforcement learning that learns drifting as a time-optimal maneuver, then adapting it to recovery through continued training with a minimum-time reward. We define recovery relative to a phase-plane-grounded stable equilibrium and introduce Gym-Khana for controller training and evaluation. Across 294 initial loss-of-control states, the transferred policy improves recovery by 186.8% over a Stanley path tracker and outperforms both a nonlinear model predictive controller and a recovery-only policy trained from scratch, while also recovering faster on states the baseline can already handle. An ablation shows that racing pretraining, rather than broader initial-state exposure alone, drives this gain. Deployed on a physical 1:10-scale F1TENTH vehicle using system identification, actuator-lag modelling, and domain randomization, the transferred policy outperforms Stanley on every tested loss-of-control state, including recovering 50% of the time from a hard state the baseline never recovers from.

0.12

Driving Context-guided Model Predictive Planning and Control for Autonomous Car Racing at the Limit and Beyond

cs.RO eess.SY ·2026-09-11 ·Ayoub Raji, Federico Sacco, Nicola Musiu, Marko Bertogna
published similarity 0.70
Abstract · Accepted to IEEE/RSJ International Conference on Intelligent Robots & Systems - IROS 2026

This paper presents a Model Predictive Control-based motion planning and control pipeline for autonomous car racing capable of adapting to different driving contexts, such as overtaking, nominal driving, and countersteering. A Cost Blending state machine manages the identification of different driving contexts and the selection of their predefined weights to be applied to the Model Predictive Planning (MPP) and Control (MPC) modules. The two optimization-based solutions share the same problem formulation and model, differing only in horizon length, rate, tuning, and in their open-loop versus closed-loop approach to maximize the effectiveness of their interaction. The work is validated on the fully autonomous open-wheel racecar Superformula EAV-25, with a lap time achieved that is within 2% of the best human driver reference. The results demonstrate the capability of the solution in driving at the limit of handling, smoothly executing overtaking maneuvers, and quickly reacting to high oversteering conditions to recover the vehicle stability.

0.31

Prescribed Performance Guided Safe Reinforcement Learning for Roundabout Navigation of Autonomous Vehicles

cs.RO ·2026-10-20 ·Wenhan Li, Yangrui Zhang, Hang Zhou, Peiran Liu, Yiding Ji
similarity 0.68
Abstract · 8 pages, 10 figures

Connected and Autonomous Vehicles (CAVs) face significant challenges in roundabout navigation due to dense traffic interactions and unpredictable agent behaviors, necessitating high levels of adaptability and safety. While the combination of Reinforcement Learning (RL) and Model Predictive Control (MPC) offers a promising approach, existing frameworks suffer from a structural mismatch where pointwise RL decisions fail to align with MPC's trajectory level optimization, and often lack rigorous safety guarantees. This work proposes RLTrajGen-PPMPC-CBF, a hierarchical framework for safe, smooth and comfort roundabout navigation, which regulates the coupling between RL-based planning and MPC-based control. We employ Prescribed Performance Constraints (PPC) to enforce a gradual, stable convergence between reference trajectories and control outputs, ensuring MPC tracking performance remains consistent with intended behavior from RL. Additionally, a Control Barrier Function (CBF) layer provides real-time safety corrections that are fed back into the RL process. Simulation results in the MetaDrive environment demonstrate that our method achieves a 6.25\% increase in average success rate and a 65.87\% reduction in Motion Sickness Dose Value (MSDV) compared to the optimal baseline, meanwhile accelerating training convergence.

0.23

Closed-Loop Refinement and Execution for Learned Driving Planners

eess.SY cs.RO ·2026-10-01 ·Huaijin Hu, Shanting Wang, Zhongyu Mo, Andreas A. Malikopoulos
similarity 0.67
Abstract · 8 pages, 6 figures, 3 tables. Submitted to the 2027 American Control Conference (ACC 2027)

Learning-based driving planners are usually trained and evaluated in open loop against logged trajectories. In closed loop, a trajectory with small displacement error can still stall the vehicle, steer it into a conflict with surrounding agents, or be executed with abrupt braking. We introduce Closed-Loop Refinement and Execution (CLRE), a hierarchical receding-horizon control framework designed to mitigate these failure modes while leaving the upstream planner frozen and adding no new learned model. The upper layer treats the nominal trajectory as a reference and solves a finite-horizon optimal control problem that trades route progress against interaction with predicted agents. Solving it from several initializations gives a candidate set, and a prediction-conditioned oriented-bounding-box (OBB) feasibility test retains only candidates whose minimum predicted OBB clearance over the horizon meets a threshold. The lower layer executes the lowest-cost survivor, or a route-centerline backup when none remains, through the tracking controller supplied with the planner, augmented by a range-based speed bound and a saturated proportional braking law. In closed-loop simulation on the 220-route Bench2Drive validation set with VAD as the upstream planner, CLRE raises the driving score from 42.26 to 55.89 and route completion from 55.69 to 71.51, and reduces collision events from 117 to 97.

0.23

Guiding End-to-End Driving Models with Endpoint-Constrained Trajectory Optimization

cs.RO cs.AIcs.CVcs.LG ·2026-09-25 ·Brayden Zhang, Mahsa Golchoubian, Igor Gilitschenski, Boris Ivanovic, Kashyap Chitta
similarity 0.67
Abstract

End-to-end driving policies are commonly trained through open-loop behavior cloning, yet they must ultimately operate in closed-loop when deployed on a vehicle, creating a fundamental mismatch between training and execution. Beyond the commonly studied effects of covariate shift and causal confusion, we identify a complementary factor for this open-loop/closed-loop gap: waypoint-based supervision and displacement metrics do not ensure that the intermediate trajectory is physically coherent or easy for the controller to track. We observe that these inconsistencies concentrate primarily at intermediate waypoints, while the predicted endpoint remains comparatively reliable. Based on this observation, we introduce Endpoint-Constrained Optimization (ECO), a lightweight postprocessing layer that anchors the trajectory to the vehicle's executed history, preserves the policy's predicted endpoint, and reshapes the intermediate waypoints to improve feasibility. ECO requires no map, privileged simulator state, or additional training, and can be inserted between a broad range of waypoint-emitting policies and their controllers. Across two closed-loop simulators, it improves the aggregate closed-loop score of all six evaluated generative and regression-based driving policies, and the gains tend to increase with how often the base plans violate motion limits. On HUGSIM, ECO improves VaVAM from 18.1 to 31.0 HD-Score (+71%), achieving 1st place on the HUGSIM Closed-Loop Driving Challenge. Similarly, on AlpaSim, ECO increases the scene scores of VaVAM and DiffusionDrive by 123% and 22%, respectively. These results show that for a broad collection of end-to-end driving models, repairing the intermediate geometry of predicted trajectories without changing the policy's predicted endpoint can substantially improve closed-loop performance.

0.17

Beyond Safe Execution: Safe Online Reinforcement Learning for Autonomous Driving with Value Calibration and Adaptive Guidance

cs.RO ·2026-10-13 ·Zeqiao Li, Yijing Wang, Haoyu Wang, Zheng Li, Zhiqiang Zuo
similarity 0.67
Abstract

Online reinforcement learning (RL) enables driving policies to adapt to changing deployment conditions, but requires safe exploration throughout training. Safety filtering alone does not ensure stable policy improvement or reduced dependence on corrections. We propose Safe Online Adaptive Refinement (SOAR-Flow), a framework for safe and stable online fine-tuning of offline-initialized Flow-based driving policies. A control barrier function (CBF)--model predictive control (MPC) filter corrects potentially unsafe actions before execution. To support stable policy updates, we introduce Gaussian-return-aware value calibration based on calibrated Q-learning (Cal-QL), using recorded behavior returns and predicted return variability to smooth conservative critic updates and mitigate policy degradation. Paired corrective learning teaches feasible action adjustments, while an intervention-to-go predictor encourages decisions requiring fewer future corrections. Its predictions also regulate guidance strength, allowing recovery supervision to weaken as predicted dependence decreases. Together with gradually reduced calibration regularization, this supports continued task improvement while preserving hard execution constraints. We analyze conditions for safe execution at control steps and diminishing auxiliary learning influences. We evaluate SOAR-Flow in simulation and on an uncrewed ground vehicle (UGV). The results demonstrate improved driving performance and reduced reliance on safety corrections during protected online fine-tuning. The demonstration video and project overview are available at https://lzqw.github.io/SOAR-Flow/.

0.23

Energy-Aware Path Following: Comparative Analysis of Reinforcement Learning and NMPC for Electric Vehicles

cs.RO cs.LGeess.SY ·2026-10-06 ·Mohamed Sabaa, Mostafa Emam
similarity 0.66
Abstract · 20 pages, 12 figures, currently submitted for review at the journal (Robotics and Autonomous Systems) https://www.sciencedirect.com/journal/…

Path-following control strategies typically follow the bi-objective optimization dilemma: minimizing deviations from a reference path while maintaining smooth speed profiles. The latter objective is especially relevant for Electric Vehicles (EVs), since their limited driving range can be extended by recovering energy through regenerative braking, a feature that has not yet been sufficiently studied in the literature. In this work, we perform a comparative analysis of four controllers under one common Frenet frame-based kinematic vehicle model, utilizing a validated energy model (VT-CPEM) with explicit regenerative braking. Herein, we implement the following controllers: Nonlinear Model Predictive Control (NMPC), Proximal Policy Optimization (PPO), gain-scheduled Ackermann state-feedback baseline (PID-SF), and a Stanley geometric baseline. To satisfy real-time requirements, we implement the NMPC using JIT-compiled CasADi. Moreover, we train the PPO using traditional straight and S-curve tracks, after which we successfully transfer the unmodified policy to unseen tracks, including: an ISO 3888-1 lane-change, a chicane, randomly-generated parameterized-splines, and a $\pm3^\circ$ graded road. In addition, the policy transfers to a dynamic single-track vehicle model with linear tires, zero-shot with an acceptable initial performance, which was optimized after brief fine-tuning. Thereby, we demonstrate that our PPO is readily transferable to more comprehensive vehicle models. We conclude with a performance analysis of developed controllers and discuss ideas for future work.

0.25