CS Paper Radar

Vehicle Drift Emergence: Continuous Evolution from Grip Driving to the Handling Limit via Boundary Exploration Learning Model Predictive Control

Sheng Zhao, Binh-Minh Nguyen, Hangyu Lu, Xiaodong Wu

cs.RO ·submitted 2026-08-28 15:41 UTC · v1

Abstract

Automated drift controllers commonly track a prescribed drift equilibrium, sideslip reference, or trajectory. These formulations establish how to execute drift, whereas the continuous transition from grip driving to drift near the handling limit remains unresolved. This paper defines drift emergence in a repetitive lap time minimization task, where neither the controller objective nor the reward contains an explicit drift reference. A boundary exploration learning model predictive controller (BE-LMPC) constructs an empirical safe set and a locally shifted terminal cost from completed laps. By iteratively improving spatial speed allocation under a fixed global speed bound, the controller progressively explores larger sideslip and yaw rate envelopes while preserving recoverability. As lap performance improves, sustained sideslip and pronounced yaw motion emerge while the rear axle approaches saturation. Analysis shows that, when external conditions vary smoothly, the transition from tire adhesion to sliding does not itself cause abrupt changes in tire force or vehicle state. The combined-slip Fiala model satisfies this continuity condition at the transition. At a tire road friction coefficient of 0.6, lap time decreases from 49.95 s on Lap~3 to 25.50 s on Lap~12, with drift first emerging on Lap~11. Lap~12 reaches 16.5$^\circ$ sideslip and 0.894 rear axle utilization. In contrast, no drift is detected for friction coefficients from 0.8 to 1.2; at 1.2, a similar peak speed is achieved with only 0.483 rear axle utilization. These results characterize drift as a conditional continuation of limit handling that emerges when increasing performance demand approaches the available tire capacity, rather than as a separately prescribed motion mode.

Closest papers

Nearest neighbours by meaning across the whole index.

Sideslip-Conditioned Drift Trajectory Planning with Flow Matching and Control Barrier Functions

cs.RO ·2026-11-17 ·Seokjun Lee, Seung-Hyun Kong
similarity 0.74
Abstract · 8 pages, 4 figures, 3 tables. Under review. Demonstration video: https://youtu.be/nskukDD1MFg

Drifting, the deliberate control of a vehicle at large sideslip angles, is relevant to both motorsport and recovery from unexpected oversteer. Existing autonomous drifting methods typically determine drift intensity through predefined reference trajectories, optimization objectives, or learned policy rewards, rather than accepting a desired sideslip angle as an explicit input. We propose, to the best of our knowledge, the first generative drift trajectory planner explicitly conditioned on a requested peak sideslip angle. A conditional flow matching model is trained on demonstrated drift laps with hindsight-derived sideslip labels and refined through reinforcement fine-tuning. A control barrier function (CBF) correction is then applied to satisfy model-based road, tire friction, and actuator constraints at the planning waypoints. In closed-loop experiments in the racing simulator Assetto Corsa, a nonlinear model predictive controller tracks the generated plans for six requested sideslip angles from 20 deg to 45 deg, with 30 laps (approximately 75 km) per request. The median peak sideslip angle measured across drift-corner passes follows the requested angle, with a mean absolute error of 1.2 deg across the six conditions. Ablation experiments show that reinforcement fine-tuning improves conditioning accuracy, while CBF correction substantially reduces off-road and spin events.

0.43

High-Speed Forward and Reverse Tractor-Trailer Driving with Learned Vehicle Dynamics

cs.RO eess.SY ·2026-11-15 ·Aaron Chen, David Shen, Taekyung Kim, Kaleb Ben Naveed, Dimitra Panagou
code/data similarity 0.71
Abstract · The first three authors contributed equally to this work. Project page: https://ds12a.github.io/drift-with-trailer/

Tractor-trailer systems are difficult to control, especially unstable during reverse motion, and their dynamics depend on difficult-to-measure factors, including road friction and suspension coefficients. We introduce a learned dynamics model for tractor-trailer control and compare it with a reduced-order dynamics model with Fiala tire forces as an analytic baseline. Specifically, we compare a model predictive path integral (MPPI) controller that uses the learned dynamics model to an MPPI controller that uses the analytic model, as well as to three additional baseline controllers. In the main closed-loop tracking experiments across four simulated environments, MPPI with learned dynamics achieves mean speeds closer to the target magnitudes and lower root-mean-square (RMS) hitch angles than MPPI with the analytic model at every tested setpoint, with higher completion rates in seven of eight reverse configurations.

0.17

Data-Driven Predictive Control for Autonomous Vehicle Racing under Varying Friction

eess.SY cs.RO ·2026-11-16 ·Julius Beerwerth, Julius Tischbein, Bassam Alrifaee
code/datahot direction similarity 0.64
Abstract · 8 pages, 4 figures. Submitted to the 2027 European Control Conference (ECC). Code and data: https://github.com/bassamlab/multisurface-racing…

Data-driven predictive control (DPC) predicts future outputs by combining recorded input-output trajectory data such that the combined trajectory approximately matches a measured initial trajectory and tracks a provided reference. This paper investigates to what extent and under which conditions DPC using data pooled across operating conditions retains the prediction accuracy of DPC using data from the current operating condition. In autonomous vehicle racing, the tire-road friction varies between racetrack sections and tire sets. If the initial trajectory and the recorded data originate from different frictions, prediction accuracy of DPC degrades. Ensuring the frictions match requires knowing the friction during recording and estimating the current friction explicitly. Instead, we pool data recorded at different frictions. We compare the prediction accuracy of DPC using data recorded under the current friction (matched), a different friction (mismatched) and data pooled from both frictions. We evaluate in simulation and small-scale vehicle experiments in the Cyber-Physical Mobility Lab (CPM Lab). Our results show that pooled data keep the multi-step root-mean-square prediction error within 1.5 times that of matched data, whereas mismatched data increase it by a factor of 2.2 to 3.4. To assess how this prediction accuracy carries over to control, we evaluate the tracking error from the raceline in closed loop. In simulation, DPC with pooled data tracks comparably to nonlinear model predictive control (13.7 cm versus 13.3 cm) and close to DPC with matched data in the CPM Lab, differing by 0.1 cm on the low-friction tires (1.6 cm versus 1.5 cm) and by 0.2 cm on the high-friction tires (0.9 cm versus 1.1 cm). DPC thus provides partial adaptation to varying friction, without a dedicated adaptation method.

0.59

Race to Recovery: Designing Advanced Safety Systems for Autonomous Driving via Learning Autonomous Racing

cs.RO ·2026-10-14 ·Teodor Ilie, Kleber Cabral, Sidney Givigi
similarity 0.62
Abstract · 13 pages, 6 figures, 8 tables. Submitted to IEEE Transactions on Intelligent Vehicles

Vehicles that lose control at the handling limit through icing, hydroplaning, or an abrupt evasive maneuver fall outside the operating envelope of production safety systems such as electronic stability control, which focus on preventing instability rather than recovering from it. Expert drivers regain authority in these conditions by drifting. Existing autonomous recovery approaches are validated on idealized scenarios, define "recovered" states empirically and inconsistently, or rely on offline-planned trajectories rather than acting online. We address these gaps by first training a racing policy with reinforcement learning that learns drifting as a time-optimal maneuver, then adapting it to recovery through continued training with a minimum-time reward. We define recovery relative to a phase-plane-grounded stable equilibrium and introduce Gym-Khana for controller training and evaluation. Across 294 initial loss-of-control states, the transferred policy improves recovery by 186.8% over a Stanley path tracker and outperforms both a nonlinear model predictive controller and a recovery-only policy trained from scratch, while also recovering faster on states the baseline can already handle. An ablation shows that racing pretraining, rather than broader initial-state exposure alone, drives this gain. Deployed on a physical 1:10-scale F1TENTH vehicle using system identification, actuator-lag modelling, and domain randomization, the transferred policy outperforms Stanley on every tested loss-of-control state, including recovering 50% of the time from a hard state the baseline never recovers from.

0.12

Online Constraint Optimization-Based Indirect-Adaptive Robust Control for Autonomous Vehicles with Unknown Friction

eess.SY cs.RO ·2026-10-15 ·Yupeng Zhou, I-Chia Chang, Ziran Wang, Bin Yao
code/data similarity 0.62
Abstract

Friction uncertainty is a significant challenge for autonomous vehicle control, undermining feasibility and performance. This paper proposes a novel two-layer control framework to achieve vehicle motion control under large friction uncertainty by combining optimization-based planning with indirect adaptive robust control (IARC). The upper layer solves a constrained optimal control problem to generate a feasible trajectory that satisfies all the constraints in a time-optimal manner along the desired path. The lower layer, IARC, adapts the unknown parameters related to friction uncertainty and combines model compensation with robust feedback to ensure transient and steady-state tracking performance. An estimation monitor is designed to prevent poor learning when data indicate a model mismatch, while a smooth parameter reset reduces the estimated tire capacity and limits abrupt tightening of constraints. The updated parameters are fed back into the model and constraints in the planner, enabling trajectory replanning as friction conditions change. Simulation results indicate that the proposed method achieves accurate tracking of the desired trajectory and online friction adaptation under large friction uncertainty while ensuring time-optimal vehicle motion. The simulation results demos are available at https://github.com/TedZhou0603/CO-IARC.

0.27

Closed-Loop Refinement and Execution for Learned Driving Planners

eess.SY cs.RO ·2026-10-01 ·Huaijin Hu, Shanting Wang, Zhongyu Mo, Andreas A. Malikopoulos
similarity 0.61
Abstract · 8 pages, 6 figures, 3 tables. Submitted to the 2027 American Control Conference (ACC 2027)

Learning-based driving planners are usually trained and evaluated in open loop against logged trajectories. In closed loop, a trajectory with small displacement error can still stall the vehicle, steer it into a conflict with surrounding agents, or be executed with abrupt braking. We introduce Closed-Loop Refinement and Execution (CLRE), a hierarchical receding-horizon control framework designed to mitigate these failure modes while leaving the upstream planner frozen and adding no new learned model. The upper layer treats the nominal trajectory as a reference and solves a finite-horizon optimal control problem that trades route progress against interaction with predicted agents. Solving it from several initializations gives a candidate set, and a prediction-conditioned oriented-bounding-box (OBB) feasibility test retains only candidates whose minimum predicted OBB clearance over the horizon meets a threshold. The lower layer executes the lowest-cost survivor, or a route-centerline backup when none remains, through the tracking controller supplied with the planner, augmented by a range-based speed bound and a saturated proportional braking law. In closed-loop simulation on the 220-route Bench2Drive validation set with VAD as the upstream planner, CLRE raises the driving score from 42.26 to 55.89 and route completion from 55.69 to 71.51, and reduces collision events from 117 to 97.

0.23

LLA-MPC on Embedded Hardware: Rapid Adaptive Control with Thousands of Parallel Models

cs.RO eess.SY ·2026-10-02 ·Henry Z. Liao, Maitham F. AL-Sunni, John M. Dolan
publishedcode/data similarity 0.60
Abstract · This work has been accepted in the Sim2Real and Classical Control: From Rigorous Theory to Data-Driven Robotics Workshop at the 2026 IEEE/RS…

We present a generalized implementation of Look-Back and Look-Ahead Adaptive Model Predictive Control (LLA-MPC), a learning-free framework for real-time, rapid adaptive system identification and control. The original formulation was demonstrated only in simulation, for autonomous racing with a fixed model structure. Our implementation has modular dynamics and integrators, and we validate it on the F1TENTH platform under constrained computation and noisy state estimation. The system identifies tire parameters online by evaluating thousands of candidate models in real time on an embedded computer. Experiments with low-friction tires across changing surfaces show that LLA-MPC completes high-speed tracking tasks where a fixed nominal model fails. Code, videos, and our related work are available at: https://lla-control.github.io.

0.56

DynLimit: A Simulation Benchmark for Dynamics-Critical Planning and Control

cs.RO ·2026-11-15 ·Yang Xiao, Yongzhi Liu, Sunan Zhang, Kang Wang, Guodong Yin +1 more
benchmarkcode/data similarity 0.59
Abstract · 8 pages

Experiments near vehicle handling limits must keep three questions apart: what a maneuver requests, what the closed-loop system executes, and whether the task is completed. We present DynLimit, a simulation platform that organizes this process end to end. Scenarios are composed from road, friction, obstacle, and reference objects; planners and controllers attach through a shared observation and control interface; a vehicle adapter runs either a license-free four-wheel model or an external dynamics solver; and synchronized records feed task evaluation, replay, and response inspection. The platform carries a task-oriented evaluation method that pairs a prescribed reference demand with a sampled passing set and event-aligned diagnosis. Across eight task families, three friction environments, and three reference-assisted baseline chains we executed 450 runs: 360 nominal, 18 locally refined, and 72 with prescribed initial offsets. Method differences depend on the task family, equal aggregate pass counts arise from different passing cells, and local refinement narrows two sampled transitions without locating a continuous boundary. Two case comparisons show why sideslip or tire-utilization peaks cannot replace task constraints. The three views therefore stay distinct in every reported run: an outcome can be traced from the prescribed demand, through the executed response, to the task rule that decided it. Code is available at https://github.com/Yang2581/dynlimit

0.28