CS Paper Radar

Data-Driven Predictive Control for Autonomous Vehicle Racing under Varying Friction

Julius Beerwerth, Julius Tischbein, Bassam Alrifaee

eess.SY cs.RO ·submitted 2026-11-16 16:38 UTC · v1
code/data

Abstract

Data-driven predictive control (DPC) predicts future outputs by combining recorded input-output trajectory data such that the combined trajectory approximately matches a measured initial trajectory and tracks a provided reference. This paper investigates to what extent and under which conditions DPC using data pooled across operating conditions retains the prediction accuracy of DPC using data from the current operating condition. In autonomous vehicle racing, the tire-road friction varies between racetrack sections and tire sets. If the initial trajectory and the recorded data originate from different frictions, prediction accuracy of DPC degrades. Ensuring the frictions match requires knowing the friction during recording and estimating the current friction explicitly. Instead, we pool data recorded at different frictions. We compare the prediction accuracy of DPC using data recorded under the current friction (matched), a different friction (mismatched) and data pooled from both frictions. We evaluate in simulation and small-scale vehicle experiments in the Cyber-Physical Mobility Lab (CPM Lab). Our results show that pooled data keep the multi-step root-mean-square prediction error within 1.5 times that of matched data, whereas mismatched data increase it by a factor of 2.2 to 3.4. To assess how this prediction accuracy carries over to control, we evaluate the tracking error from the raceline in closed loop. In simulation, DPC with pooled data tracks comparably to nonlinear model predictive control (13.7 cm versus 13.3 cm) and close to DPC with matched data in the CPM Lab, differing by 0.1 cm on the low-friction tires (1.6 cm versus 1.5 cm) and by 0.2 cm on the high-friction tires (0.9 cm versus 1.1 cm). DPC thus provides partial adaptation to varying friction, without a dedicated adaptation method.

Comment
8 pages, 4 figures. Submitted to the 2027 European Control Conference (ECC). Code and data: https://github.com/bassamlab/multisurface-racing-with-dpc

Closest papers

Nearest neighbours by meaning across the whole index.

Mapping Tire-Road Friction Coefficients Along Driven Trajectories

cs.RO ·2026-10-09 ·Risto Ojala
benchmarkcode/data similarity 0.65
Abstract

Information of the tire-road friction coefficient is critical for intelligent vehicle systems, as friction establishes the limits at which the vehicle can be manoeuvred without loss of control. While there is extensive literature on online friction estimation, no previous studies have explored post-processing and mapping friction coefficients along a driven trajectory based on recorded sensor data. Mapped friction information could be shared by connected vehicles, enabling proactive measures in low-friction areas. This paper presents an offline post-processing method, FrictionMap, for mapping friction coefficients from recorded driving data. The method operates on commonly available on-board vehicle sensor information, and requires only a basic vehicle parameter set and a slip threshold as prior knowledge. FrictionMap runs an extended Kalman filter combined with a Rauch-Tung-Striebel smoother to estimate vehicle dynamics. Data points where the friction limit is observable are identified by filtering points based on tire slip. A Gaussian process is fitted to these points to acquire a continuous estimate of the friction coefficient along the trajectory. FrictionMap is validated via a simulation study, and shown to outperform commonly used online friction estimation techniques. The code implementation and the simulation benchmark are released as open-source after paper acceptance to enable further research.

0.34

Vehicle Drift Emergence: Continuous Evolution from Grip Driving to the Handling Limit via Boundary Exploration Learning Model Predictive Control

cs.RO ·2026-08-28 ·Sheng Zhao, Binh-Minh Nguyen, Hangyu Lu, Xiaodong Wu
similarity 0.64
Abstract

Automated drift controllers commonly track a prescribed drift equilibrium, sideslip reference, or trajectory. These formulations establish how to execute drift, whereas the continuous transition from grip driving to drift near the handling limit remains unresolved. This paper defines drift emergence in a repetitive lap time minimization task, where neither the controller objective nor the reward contains an explicit drift reference. A boundary exploration learning model predictive controller (BE-LMPC) constructs an empirical safe set and a locally shifted terminal cost from completed laps. By iteratively improving spatial speed allocation under a fixed global speed bound, the controller progressively explores larger sideslip and yaw rate envelopes while preserving recoverability. As lap performance improves, sustained sideslip and pronounced yaw motion emerge while the rear axle approaches saturation. Analysis shows that, when external conditions vary smoothly, the transition from tire adhesion to sliding does not itself cause abrupt changes in tire force or vehicle state. The combined-slip Fiala model satisfies this continuity condition at the transition. At a tire road friction coefficient of 0.6, lap time decreases from 49.95 s on Lap~3 to 25.50 s on Lap~12, with drift first emerging on Lap~11. Lap~12 reaches 16.5$^\circ$ sideslip and 0.894 rear axle utilization. In contrast, no drift is detected for friction coefficients from 0.8 to 1.2; at 1.2, a similar peak speed is achieved with only 0.483 rear axle utilization. These results characterize drift as a conditional continuation of limit handling that emerges when increasing performance demand approaches the available tire capacity, rather than as a separately prescribed motion mode.

0.32

Sideslip-Conditioned Drift Trajectory Planning with Flow Matching and Control Barrier Functions

cs.RO ·2026-11-17 ·Seokjun Lee, Seung-Hyun Kong
hot direction similarity 0.64
Abstract · 8 pages, 4 figures, 3 tables. Under review. Demonstration video: https://youtu.be/nskukDD1MFg

Drifting, the deliberate control of a vehicle at large sideslip angles, is relevant to both motorsport and recovery from unexpected oversteer. Existing autonomous drifting methods typically determine drift intensity through predefined reference trajectories, optimization objectives, or learned policy rewards, rather than accepting a desired sideslip angle as an explicit input. We propose, to the best of our knowledge, the first generative drift trajectory planner explicitly conditioned on a requested peak sideslip angle. A conditional flow matching model is trained on demonstrated drift laps with hindsight-derived sideslip labels and refined through reinforcement fine-tuning. A control barrier function (CBF) correction is then applied to satisfy model-based road, tire friction, and actuator constraints at the planning waypoints. In closed-loop experiments in the racing simulator Assetto Corsa, a nonlinear model predictive controller tracks the generated plans for six requested sideslip angles from 20 deg to 45 deg, with 30 laps (approximately 75 km) per request. The median peak sideslip angle measured across drift-corner passes follows the requested angle, with a mean absolute error of 1.2 deg across the six conditions. Ablation experiments show that reinforcement fine-tuning improves conditioning accuracy, while CBF correction substantially reduces off-road and spin events.

0.43

LLA-MPC on Embedded Hardware: Rapid Adaptive Control with Thousands of Parallel Models

cs.RO eess.SY ·2026-10-02 ·Henry Z. Liao, Maitham F. AL-Sunni, John M. Dolan
publishedcode/data similarity 0.62
Abstract · This work has been accepted in the Sim2Real and Classical Control: From Rigorous Theory to Data-Driven Robotics Workshop at the 2026 IEEE/RS…

We present a generalized implementation of Look-Back and Look-Ahead Adaptive Model Predictive Control (LLA-MPC), a learning-free framework for real-time, rapid adaptive system identification and control. The original formulation was demonstrated only in simulation, for autonomous racing with a fixed model structure. Our implementation has modular dynamics and integrators, and we validate it on the F1TENTH platform under constrained computation and noisy state estimation. The system identifies tire parameters online by evaluating thousands of candidate models in real time on an embedded computer. Experiments with low-friction tires across changing surfaces show that LLA-MPC completes high-speed tracking tasks where a fixed nominal model fails. Code, videos, and our related work are available at: https://lla-control.github.io.

0.56

SceneFactory-3D: Lifting 2D Traffic Scenes into 3D Physical Counterfactuals for Scalable Physically Grounded Safety Evaluation

cs.RO cs.MA ·2026-10-02 ·Yicheng Zhu, Linfeng Tian, Tianmu Zhao, Yang Chen, Fan Zuo +2 more
code/data similarity 0.62
Abstract

Scalable driving simulators typically execute vehicle commands using prescribed behavioral or kinematic rules, overlooking the physics of tire-road interfaces, thereby limiting their ability to capture how adverse road and environmental conditions alter vehicle execution and propagate through traffic. To address this limitation, we present SceneFactory-3D, a GPU-batched, physics-grounded multi-agent driving simulator. Vehicles execute acceleration and steering commands via suspension- and friction-limited forces evaluated at each wheel-contact point. Spatially varying friction, per-world 3D heightfields, gravity, and rigid contact consistently govern wheel motion and chassis collisions. Per-world terrain isolation and GPU batching enable SceneFactory-3D to run matched physical counterfactuals in parallel: traffic scenario setup and vehicle controllers remain fixed while only the road condition changes, enabling the resulting closed-loop effects to be evaluated across parallel worlds. To demonstrate the advantage of the SceneFactory-3D-enabled counterfactual evaluation, we conduct an empirical study on vehicle controllers' sensitivity to road conditions. We study three learned-policy families on 1,024 matched 12-vehicle worlds per condition, and two classical planners on a shared 32-world subset, across 21 friction and grade conditions. When friction drops from 1.0 to 0.18, the share of vehicles that clear the work zone safely falls by 6 to 90 percentage points across learned policies (18-19 for classical planners), and near-collision situations become more frequent for every learned policy. Code: https://github.com/SmallWorldLab/SceneFactory_3D

0.32

Steering Through Contact: A Finite-Support Motion Model for Single-Track Center-Articulated Robots

cs.RO ·2026-09-20 ·Mohamed Dhia Ounally, Nicolas Samson, Mathis Turgeon-Roy, Veronica Vannini, Johann Laconte +1 more
similarity 0.61
Abstract · 8 pages, 7 figures, 1 table

Trajectory planning and control in field robotics rely on predicting how propulsion and steering affect vehicle motion when contact points undergo slip. For articulated vehicles, the point-contact kinematic model (PCK) accounts for the linkage geometry but neglects the rotational resistance distributed along the contacts. We propose a finite-support quadratic model (FSQ) for single-track, center-articulated vehicles that incorporates this resistance through a quasi-static balance of lateral slip. Our approach generalizes the standard PCK formulation by relaxing the contact-point assumption. An exact reduction of the quadratic slip cost to contact moments gives a compact closed-form solution for real-time prediction of lateral velocity and yaw rate. We evaluate the proposed method in real-world experiments across asphalt, grass, ice, and mixed routes, using more than 7 km of data. For five-second predictions, FSQ reduces the weighted median translation and yaw errors by 53.5% and 68.9%, respectively, relative to PCK.

0.29

DynLimit: A Simulation Benchmark for Dynamics-Critical Planning and Control

cs.RO ·2026-11-15 ·Yang Xiao, Yongzhi Liu, Sunan Zhang, Kang Wang, Guodong Yin +1 more
benchmarkcode/data similarity 0.60
Abstract · 8 pages

Experiments near vehicle handling limits must keep three questions apart: what a maneuver requests, what the closed-loop system executes, and whether the task is completed. We present DynLimit, a simulation platform that organizes this process end to end. Scenarios are composed from road, friction, obstacle, and reference objects; planners and controllers attach through a shared observation and control interface; a vehicle adapter runs either a license-free four-wheel model or an external dynamics solver; and synchronized records feed task evaluation, replay, and response inspection. The platform carries a task-oriented evaluation method that pairs a prescribed reference demand with a sampled passing set and event-aligned diagnosis. Across eight task families, three friction environments, and three reference-assisted baseline chains we executed 450 runs: 360 nominal, 18 locally refined, and 72 with prescribed initial offsets. Method differences depend on the task family, equal aggregate pass counts arise from different passing cells, and local refinement narrows two sampled transitions without locating a continuous boundary. Two case comparisons show why sideslip or tire-utilization peaks cannot replace task constraints. The three views therefore stay distinct in every reported run: an outcome can be traced from the prescribed demand, through the executed response, to the task rule that decided it. Code is available at https://github.com/Yang2581/dynlimit

0.36

BranchDrive: A Branch-Structured Dataset for Action-Conditioned Driving Prediction

cs.RO ·2026-09-23 ·Feeza Khan Khanzada, Sudarshan Sridhar, Jaerock Kwon
benchmarkdataset similarity 0.60
Abstract

Most autonomous-driving datasets record only the action executed by a behavior policy and the single future that followed, providing limited supervision for comparing alternative ego decisions. We introduce BranchDrive, a branch-structured CARLA dataset and benchmark that pairs one canonical pre-decision history with one nominal expert future and twelve physically executed intervention futures spanning acceleration, braking, and left- and right-steering policies at three magnitudes. Each intervention lasts 2.5 s and is followed by expert recovery. Following control-compliance, modality-completeness, replay-fidelity, and action-leakage audits, the frozen benchmark contains 606 independent branch groups and 7,878 associated trajectories. We evaluate prediction of six continuous short-horizon outcomes and a ten-step ego trajectory using action-only, history-only, structured, visual, multimodal, and privileged bird's-eye-view models. On the held-out test split, the structured history-and-action model achieves a macro normalized mean absolute error of 0.5036 and an average displacement error of 2.2042 m, significantly outperforming both restricted baselines. In full-information offline evaluation, its outcome-derived selector increases balanced policy value from 0.5364 to 0.5704 and reduces normalized regret from 0.2674 to 0.1495 relative to the frozen action prior. However, a validation-calibrated minimum-separation guard rejects every intervention, showing that conservative execution remains unresolved. BranchDrive therefore supports action-conditioned short-horizon prediction and fixed-bank offline decision evaluation, but does not establish exact causal effects, binary safety prediction, or closed-loop safety improvement.

0.22