CS Paper Radar

LLA-MPC on Embedded Hardware: Rapid Adaptive Control with Thousands of Parallel Models

Henry Z. Liao, Maitham F. AL-Sunni, John M. Dolan

cs.RO eess.SY ·submitted 2026-10-02 17:13 UTC · v1
publishedcode/data

Abstract

We present a generalized implementation of Look-Back and Look-Ahead Adaptive Model Predictive Control (LLA-MPC), a learning-free framework for real-time, rapid adaptive system identification and control. The original formulation was demonstrated only in simulation, for autonomous racing with a fixed model structure. Our implementation has modular dynamics and integrators, and we validate it on the F1TENTH platform under constrained computation and noisy state estimation. The system identifies tire parameters online by evaluating thousands of candidate models in real time on an embedded computer. Experiments with low-friction tires across changing surfaces show that LLA-MPC completes high-speed tracking tasks where a fixed nominal model fails. Code, videos, and our related work are available at: https://lla-control.github.io.

Comment
This work has been accepted in the Sim2Real and Classical Control: From Rigorous Theory to Data-Driven Robotics Workshop at the 2026 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2026), Pittsburgh, PA, USA

Closest papers

Nearest neighbours by meaning across the whole index.

Driving Context-guided Model Predictive Planning and Control for Autonomous Car Racing at the Limit and Beyond

cs.RO eess.SY ·2026-09-11 ·Ayoub Raji, Federico Sacco, Nicola Musiu, Marko Bertogna
published similarity 0.67
Abstract · Accepted to IEEE/RSJ International Conference on Intelligent Robots & Systems - IROS 2026

This paper presents a Model Predictive Control-based motion planning and control pipeline for autonomous car racing capable of adapting to different driving contexts, such as overtaking, nominal driving, and countersteering. A Cost Blending state machine manages the identification of different driving contexts and the selection of their predefined weights to be applied to the Model Predictive Planning (MPP) and Control (MPC) modules. The two optimization-based solutions share the same problem formulation and model, differing only in horizon length, rate, tuning, and in their open-loop versus closed-loop approach to maximize the effectiveness of their interaction. The work is validated on the fully autonomous open-wheel racecar Superformula EAV-25, with a lap time achieved that is within 2% of the best human driver reference. The results demonstrate the capability of the solution in driving at the limit of handling, smoothly executing overtaking maneuvers, and quickly reacting to high oversteering conditions to recover the vehicle stability.

0.31

MAP2: Model- and Acceleration-Based Pursuit with MPC and Gaussian Process Residual Learning for Autonomous Racing

cs.RO ·2026-10-08 ·Weizhan Huang, Cheng Hu, Edoardo Ghignone, Nicolas Baumann, Yiqin Wang +3 more
similarity 0.66
Abstract · 8 pages, 8 figures, 5 tables

Autonomous racing requires accurate trajectory tracking near the handling limits of a vehicle while maintaining low computational latency. Geometric controllers are computationally efficient, but the Ackermann steering geometry becomes invalid under limit-handling conditions. Model- and Acceleration-based Pursuit (MAP) preserves the simplicity of geometric approaches while leveraging tire dynamics. Yet MAP remains fundamentally a geometric controller that relies on Ackermann steering geometry, and its tire model may not fully capture the vehicle's actual dynamic response. This paper presents MAP2, a model-based pursuit controller that combines a curvature-based kinematic MPC and a Sparse Gaussian Process (SGP) residual correction. The proposed algorithm uses MPC to optimize kinematic control inputs over a prediction horizon and maps them to steering commands through a tire dynamics model augmented with SGP residual correction. Real-world vehicle experiments demonstrate substantial reductions in lateral tracking error and lap time. Compared with MAP and Pure Pursuit (PP), MAP2 reduces the average lateral tracking error by 37.99% and 44.65%, respectively, while reducing average lap time by at least 1.5%.

0.26

Adaptive Model Predictive Control for Ground Vehicles: Review and Demonstrative Implementation

eess.SY ·2026-08-18 ·Chetana Gadgil, Mahendra Singh Tomar
similarity 0.66
Abstract · 16 pages, 4 figures, journal

This paper reviews Adaptive Model Predictive Control (AMPC) methods for Autonomous Vehicles (AVs), focusing on control strategies that dynamically adapt to uncertainties and changing conditions in real-time. The critical role of Adaptive Model Predictive Control (AMPC) in addressing the challenges of autonomous vehicle control are discussed. For the scope of this paper, AMPC is defined as a class of Model Predictive Control (MPC) techniques that modify the system model, cost function, constraints, or prediction horizon, based on real-time data. Traditional MPC, while effective for constrained optimization, struggles with model inaccuracies, computational demands, and dynamic environments, necessitating AMPC methods. The review covers existing literature on Gain scheduled MPC, Online Model Estimation MPC, Weight Adaptive MPC, Horizon Adaptive MPC, Learning Based MPC, and Hybrid MPC that combines MPC with other control methods. In addition to the survey, a demonstrative simulation of an adaptive MPC controller is presented that illustrates practical aspects of weight and speed adaptation in trajectory tracking.

0.29

Wheel-loader V-Cycle Automation with Deep Koopman MPC

cs.RO eess.SY ·2026-09-22 ·Armin Abdolmohammadi, Navid Mojahed, Dinesh Kumar, Bahram Ravani, Shima Nazari
similarity 0.65
Abstract · 8 pages, 4 figure

The repeated forward-reverse maneuvers performed by wheel loaders during earthmoving operations make them well suited for automation. However, the nonlinear dynamics of articulated vehicles and complex vehicle-terrain interactions limit the effectiveness of conventional model-based approaches. This paper presents a hierarchical framework that combines long-horizon geometric planning with data-driven predictive control for autonomous wheel-loader operation. A reduced-order articulated kinematic model is used to generate the maneuver geometry, where the forward and reverse trajectories are jointly optimized through a shared intermediate state. To capture the vehicle dynamics, two data-driven deep bilinear Koopman models are learned for the forward and reverse motions using data generated from high-fidelity simulations in Algoryx Dynamics. The learned Koopman representations are subsequently incorporated into a computationally efficient model predictive control (MPC) formulation for trajectory tracking. The resulting controller operates in real time within a 50-ms execution loop. High-fidelity simulation results demonstrate that the proposed end-to-end framework enables accurate and computationally efficient execution of wheel-loader V-cycle maneuvers, providing a promising approach toward autonomous operation of articulated heavy-duty machinery.

0.26

RACER: Residual-Adaptive Closed-Loop Estimation for Sampling-Based Planning in Wheeled-Quadruped Racing

cs.RO ·2026-10-05 ·Yuxiang Liu, Marla Eisman, Lizhi Yang, Aaron Ames, Francesco Borrelli
similarity 0.65
Abstract

We present RACER, a hierarchical control framework for wheel-based quadruped racing that combines an MPPI planner with a learned residual dynamics model and a low-level RL velocity tracker. The planner augments a nominal unicycle kinematic model with a neural residual term to capture the closed-loop tracking behavior of the RL policy. To train this residual model under limited real-world data, we propose Low-Rank Residual Adaptation (LoRRA), a two-stage approach that pre-trains on large-scale simulation data for broad coverage and then fine-tunes on a small real-world dataset with a low-rank constraint. In simulation, we empirically validate our engineering choices by showing (A) Residual dynamics improve the overall performance of our pipeline by capturing the tracking error of RL velocity tracker at high-speed cornering. (B) Residual dynamics trained with both source-domain and target-domain data gives racing performance significantly better than the residual dynamics trained with only target-domain data. (C) Low-rank constraint at target-domain adaptation gives higher success rates and higher performance than full-tune and from-scratch when domain gap in ground coefficient or joint gain increases.

0.23

High-Speed Forward and Reverse Tractor-Trailer Driving with Learned Vehicle Dynamics

cs.RO eess.SY ·2026-11-15 ·Aaron Chen, David Shen, Taekyung Kim, Kaleb Ben Naveed, Dimitra Panagou
code/data similarity 0.64
Abstract · The first three authors contributed equally to this work. Project page: https://ds12a.github.io/drift-with-trailer/

Tractor-trailer systems are difficult to control, especially unstable during reverse motion, and their dynamics depend on difficult-to-measure factors, including road friction and suspension coefficients. We introduce a learned dynamics model for tractor-trailer control and compare it with a reduced-order dynamics model with Fiala tire forces as an analytic baseline. Specifically, we compare a model predictive path integral (MPPI) controller that uses the learned dynamics model to an MPPI controller that uses the analytic model, as well as to three additional baseline controllers. In the main closed-loop tracking experiments across four simulated environments, MPPI with learned dynamics achieves mean speeds closer to the target magnitudes and lower root-mean-square (RMS) hitch angles than MPPI with the analytic model at every tested setpoint, with higher completion rates in seven of eight reverse configurations.

0.21

LLA-MPPI: Rapidly Adaptive Whole-body Control of Legged Robots with GPU-Accelerated Parallel Simulations

cs.RO eess.SY ·2026-10-07 ·Sebin Jung, Maitham F. AL-Sunni, Juan Alvarez-Padilla, Zachary Manchester, Changliu Liu +1 more
code/data similarity 0.64
Abstract · The first two authors are co-first authors (contributed equally to the work)

Real-time whole-body controllers for legged robots typically plan through a fixed nominal model and degrade when the deployed dynamics change. Adaptive methods typically require a model structure that contact dynamics do not provide, or they need offline training for each anticipated condition. We present Look-back and Look-ahead Adaptive Model Predictive Path Integral control (LLA-MPPI). The method converts whole-body adaptation into selection over a bank of GPU-batched contact simulators with different physical or structural parameters. Windowed prediction errors select the simulator that best explains recent motion. A whole-body MPPI planner optimizes controls through the selected model. The framework requires no offline training, and its selected hypotheses are physically interpretable. Across four simulated tasks, it achieves 97.5% success while the strongest baseline reaches 74% and an oracle with the true model reaches 98.5%. Hardware validation on a Unitree Go2 shows the robot walking under a payload added mid-run, walking after one leg is disabled, and pushing a box to its goal while increasing its mass on the fly. Code, videos, and project details are available at: https://lla-control.github.io

0.29

Mission Performance: Automatic and Adaptive Race Pace Progression for Autonomous Racing

cs.RO cs.SEeess.SY ·2026-09-10 ·Giovanni Lambertini, Matteo Pini, Nicola Musiu, Ayoub Raji, Francesco Iacovacci +1 more
published similarity 0.64
Abstract · Accepted to the 2026 IEEE International Conference on Intelligent Transportation Systems (ITSC 2026)

In this paper, we describe the Mission Performance module implemented for a fully autonomous racing car to automatically manage the longitudinal, lateral, and combined performances, aiming to speedup the laptime progression while assuring safety. Motivated by the difficulty and risks of applying the real-time estimation of the grip to critical modules like the motion planner and controller, the Mission Performance guides these modules adapting their target performance instead of changing the vehicle model parameters. The module is formed by pre-defined progressions to warm up the tires at the beginning of a run. Then, the system continuously monitors safety and vehicle dynamics metrics on a per-sector basis to adaptively reduce, maintain, or increase the performance levels for each sector, progressively converging toward the maximum allowed value. The solution's effectiveness is demonstrated on the EAV-25, a fully autonomous Dallara Superformula, at the Yas Marina Circuit during the Abu Dhabi Autonomous Racing League (A2RL) Season 2.

0.35