CS Paper Radar

Mission Performance: Automatic and Adaptive Race Pace Progression for Autonomous Racing

Giovanni Lambertini, Matteo Pini, Nicola Musiu, Ayoub Raji, Francesco Iacovacci, Marko Bertogna

cs.RO cs.SEeess.SY ·submitted 2026-09-10 23:41 UTC · v1
published

Abstract

In this paper, we describe the Mission Performance module implemented for a fully autonomous racing car to automatically manage the longitudinal, lateral, and combined performances, aiming to speedup the laptime progression while assuring safety. Motivated by the difficulty and risks of applying the real-time estimation of the grip to critical modules like the motion planner and controller, the Mission Performance guides these modules adapting their target performance instead of changing the vehicle model parameters. The module is formed by pre-defined progressions to warm up the tires at the beginning of a run. Then, the system continuously monitors safety and vehicle dynamics metrics on a per-sector basis to adaptively reduce, maintain, or increase the performance levels for each sector, progressively converging toward the maximum allowed value. The solution's effectiveness is demonstrated on the EAV-25, a fully autonomous Dallara Superformula, at the Yas Marina Circuit during the Abu Dhabi Autonomous Racing League (A2RL) Season 2.

Comment
Accepted to the 2026 IEEE International Conference on Intelligent Transportation Systems (ITSC 2026)

Closest papers

Nearest neighbours by meaning across the whole index.

Driving Context-guided Model Predictive Planning and Control for Autonomous Car Racing at the Limit and Beyond

cs.RO eess.SY ·2026-09-11 ·Ayoub Raji, Federico Sacco, Nicola Musiu, Marko Bertogna
published similarity 0.67
Abstract · Accepted to IEEE/RSJ International Conference on Intelligent Robots & Systems - IROS 2026

This paper presents a Model Predictive Control-based motion planning and control pipeline for autonomous car racing capable of adapting to different driving contexts, such as overtaking, nominal driving, and countersteering. A Cost Blending state machine manages the identification of different driving contexts and the selection of their predefined weights to be applied to the Model Predictive Planning (MPP) and Control (MPC) modules. The two optimization-based solutions share the same problem formulation and model, differing only in horizon length, rate, tuning, and in their open-loop versus closed-loop approach to maximize the effectiveness of their interaction. The work is validated on the fully autonomous open-wheel racecar Superformula EAV-25, with a lap time achieved that is within 2% of the best human driver reference. The results demonstrate the capability of the solution in driving at the limit of handling, smoothly executing overtaking maneuvers, and quickly reacting to high oversteering conditions to recover the vehicle stability.

0.31

LLA-MPC on Embedded Hardware: Rapid Adaptive Control with Thousands of Parallel Models

cs.RO eess.SY ·2026-10-02 ·Henry Z. Liao, Maitham F. AL-Sunni, John M. Dolan
publishedcode/data similarity 0.64
Abstract · This work has been accepted in the Sim2Real and Classical Control: From Rigorous Theory to Data-Driven Robotics Workshop at the 2026 IEEE/RS…

We present a generalized implementation of Look-Back and Look-Ahead Adaptive Model Predictive Control (LLA-MPC), a learning-free framework for real-time, rapid adaptive system identification and control. The original formulation was demonstrated only in simulation, for autonomous racing with a fixed model structure. Our implementation has modular dynamics and integrators, and we validate it on the F1TENTH platform under constrained computation and noisy state estimation. The system identifies tire parameters online by evaluating thousands of candidate models in real time on an embedded computer. Experiments with low-friction tires across changing surfaces show that LLA-MPC completes high-speed tracking tasks where a fixed nominal model fails. Code, videos, and our related work are available at: https://lla-control.github.io.

0.56

Sideslip-Conditioned Drift Trajectory Planning with Flow Matching and Control Barrier Functions

cs.RO ·2026-11-17 ·Seokjun Lee, Seung-Hyun Kong
similarity 0.62
Abstract · 8 pages, 4 figures, 3 tables. Under review. Demonstration video: https://youtu.be/nskukDD1MFg

Drifting, the deliberate control of a vehicle at large sideslip angles, is relevant to both motorsport and recovery from unexpected oversteer. Existing autonomous drifting methods typically determine drift intensity through predefined reference trajectories, optimization objectives, or learned policy rewards, rather than accepting a desired sideslip angle as an explicit input. We propose, to the best of our knowledge, the first generative drift trajectory planner explicitly conditioned on a requested peak sideslip angle. A conditional flow matching model is trained on demonstrated drift laps with hindsight-derived sideslip labels and refined through reinforcement fine-tuning. A control barrier function (CBF) correction is then applied to satisfy model-based road, tire friction, and actuator constraints at the planning waypoints. In closed-loop experiments in the racing simulator Assetto Corsa, a nonlinear model predictive controller tracks the generated plans for six requested sideslip angles from 20 deg to 45 deg, with 30 laps (approximately 75 km) per request. The median peak sideslip angle measured across drift-corner passes follows the requested angle, with a mean absolute error of 1.2 deg across the six conditions. Ablation experiments show that reinforcement fine-tuning improves conditioning accuracy, while CBF correction substantially reduces off-road and spin events.

0.43

High-Fidelity Multi-Body Simulator for Autonomous Racing

cs.RO eess.SY ·2026-09-11 ·Nicola Musiu, Francesco Iacovacci, Fausto Lupo, Matteo Pini, Giovanni Scapicchi +9 more
similarity 0.62
Abstract

We present a custom high-fidelity vehicle dynamics simulation environment for testing and validation of Autonomous Racing software. The digital twin of the autonomous vehicle is developed in Dymola, using racecar dynamics modeling libraries to build a complete multi-body model. A 3D road surface, including elevation profiles and curbs, is implemented using the Curved Regular Grid (CRG) standard. The model is exported from Dymola as a Functional Mock-up Unit (FMU) and integrated into a custom software-in-the-loop simulator, where communication interfaces with the autonomous racing stack were developed in C++. A calibration procedure based on experimental data is also presented, along with a validation study to further support the quality of the proposed framework. The simulator runs in real time on a portable computer and provides reliable ground truth for algorithms validation prior to real-world deployment.

0.20

Autonomous Track Racing with a Commercially Available Humanoid: System Design and Real-World Deployment

cs.RO ·2026-11-17 ·Koki Inami, Takashi Sato, Hiroyuki Oka, Shota Takizawa, Yuya Takahashi +5 more
similarity 0.59
Abstract · 7 pages, 2 figures. Submitted to IEEE Robotics and Automation Practice. Copyright may be transferred without notice, after which this versio…

Learning-based methods now let humanoids run robustly, and they have begun to compete in athletic events. Yet few reports describe a complete autonomous humanoid running system in an actual race, where the robot must follow a lane at a new venue, pace itself within hardware limits, and finish without intervention. We report such a system deployed on the Unitree G1, a commercially available general-purpose humanoid, in the 100 m, 400 m, and 1500 m events of the World Humanoid Robot Games 2026. The system integrates vision-based lane perception, path tracking, and a running policy trained by reinforcement learning with a human motion prior. To address the challenges of humanoid running, we stabilize head-camera images against body motion and use IMU-assisted leg odometry to bridge flight phases. To manage motor heating, we penalize hip-pitch torque during training, add heat-dissipation plates, and apply temperature-based speed limiting with event-specific pacing. The robot placed 13th of 74 in the 100 m, 10th of 44 in the 400 m first round before falling in the semifinal, and seventh of 35 in the 1500 m. In this deployment, thermal margin set the pace in every event, and the semifinal fall followed a lane-detection error.

0.23

Vehicle Drift Emergence: Continuous Evolution from Grip Driving to the Handling Limit via Boundary Exploration Learning Model Predictive Control

cs.RO ·2026-08-28 ·Sheng Zhao, Binh-Minh Nguyen, Hangyu Lu, Xiaodong Wu
similarity 0.58
Abstract

Automated drift controllers commonly track a prescribed drift equilibrium, sideslip reference, or trajectory. These formulations establish how to execute drift, whereas the continuous transition from grip driving to drift near the handling limit remains unresolved. This paper defines drift emergence in a repetitive lap time minimization task, where neither the controller objective nor the reward contains an explicit drift reference. A boundary exploration learning model predictive controller (BE-LMPC) constructs an empirical safe set and a locally shifted terminal cost from completed laps. By iteratively improving spatial speed allocation under a fixed global speed bound, the controller progressively explores larger sideslip and yaw rate envelopes while preserving recoverability. As lap performance improves, sustained sideslip and pronounced yaw motion emerge while the rear axle approaches saturation. Analysis shows that, when external conditions vary smoothly, the transition from tire adhesion to sliding does not itself cause abrupt changes in tire force or vehicle state. The combined-slip Fiala model satisfies this continuity condition at the transition. At a tire road friction coefficient of 0.6, lap time decreases from 49.95 s on Lap~3 to 25.50 s on Lap~12, with drift first emerging on Lap~11. Lap~12 reaches 16.5$^\circ$ sideslip and 0.894 rear axle utilization. In contrast, no drift is detected for friction coefficients from 0.8 to 1.2; at 1.2, a similar peak speed is achieved with only 0.483 rear axle utilization. These results characterize drift as a conditional continuation of limit handling that emerges when increasing performance demand approaches the available tire capacity, rather than as a separately prescribed motion mode.

0.32

Race to Recovery: Designing Advanced Safety Systems for Autonomous Driving via Learning Autonomous Racing

cs.RO ·2026-10-14 ·Teodor Ilie, Kleber Cabral, Sidney Givigi
similarity 0.58
Abstract · 13 pages, 6 figures, 8 tables. Submitted to IEEE Transactions on Intelligent Vehicles

Vehicles that lose control at the handling limit through icing, hydroplaning, or an abrupt evasive maneuver fall outside the operating envelope of production safety systems such as electronic stability control, which focus on preventing instability rather than recovering from it. Expert drivers regain authority in these conditions by drifting. Existing autonomous recovery approaches are validated on idealized scenarios, define "recovered" states empirically and inconsistently, or rely on offline-planned trajectories rather than acting online. We address these gaps by first training a racing policy with reinforcement learning that learns drifting as a time-optimal maneuver, then adapting it to recovery through continued training with a minimum-time reward. We define recovery relative to a phase-plane-grounded stable equilibrium and introduce Gym-Khana for controller training and evaluation. Across 294 initial loss-of-control states, the transferred policy improves recovery by 186.8% over a Stanley path tracker and outperforms both a nonlinear model predictive controller and a recovery-only policy trained from scratch, while also recovering faster on states the baseline can already handle. An ablation shows that racing pretraining, rather than broader initial-state exposure alone, drives this gain. Deployed on a physical 1:10-scale F1TENTH vehicle using system identification, actuator-lag modelling, and domain randomization, the transferred policy outperforms Stanley on every tested loss-of-control state, including recovering 50% of the time from a hard state the baseline never recovers from.

0.12

Stability Control for Real World Testing in Autonomous Racing

cs.RO eess.SY ·2026-08-18 ·Phillip Pitschi, Simon Sagmeister, Frederik Werner, Markus Lienkamp, Boris Lohmann
publishedcode/data similarity 0.58
Abstract · Accepted at IEEE ITSC 2026

Controlling an autonomous vehicle at the limits of handling is a challenging task. Due to external influences, such as road conditions or weather, a vehicle can easily become unstable. Since most control algorithms assume stable vehicle behavior, they might fail in these situations. Especially when operating expensive vehicles without a safety driver on board, as in autonomous racing, this poses a significant challenge. To enable safe operation at the vehicle's dynamic limits, we present a comprehensive stability control system that safeguards motion control algorithms in autonomous driving. The proposed system consists of an electronic stability control (ESC), a slip control (SC), and a countersteer system (CS), which collectively adapt steering and brake commands from the motion controller to maintain vehicle stability. We validate our approach through both simulation and experiments on a real-world, full-scale vehicle. The results show that the stability control system maintains vehicle stability in critical situations and extends the operational feasible region. To simplify integration, we provide an open-source implementation at github.com/TUMFTM/tam-stability-control.

0.44