CS Paper Radar

Stability Control for Real World Testing in Autonomous Racing

Phillip Pitschi, Simon Sagmeister, Frederik Werner, Markus Lienkamp, Boris Lohmann

cs.RO eess.SY ·submitted 2026-08-18 13:41 UTC · v1
publishedcode/data

Abstract

Controlling an autonomous vehicle at the limits of handling is a challenging task. Due to external influences, such as road conditions or weather, a vehicle can easily become unstable. Since most control algorithms assume stable vehicle behavior, they might fail in these situations. Especially when operating expensive vehicles without a safety driver on board, as in autonomous racing, this poses a significant challenge. To enable safe operation at the vehicle's dynamic limits, we present a comprehensive stability control system that safeguards motion control algorithms in autonomous driving. The proposed system consists of an electronic stability control (ESC), a slip control (SC), and a countersteer system (CS), which collectively adapt steering and brake commands from the motion controller to maintain vehicle stability. We validate our approach through both simulation and experiments on a real-world, full-scale vehicle. The results show that the stability control system maintains vehicle stability in critical situations and extends the operational feasible region. To simplify integration, we provide an open-source implementation at github.com/TUMFTM/tam-stability-control.

Comment
Accepted at IEEE ITSC 2026

Closest papers

Nearest neighbours by meaning across the whole index.

Race to Recovery: Designing Advanced Safety Systems for Autonomous Driving via Learning Autonomous Racing

cs.RO ·2026-10-14 ·Teodor Ilie, Kleber Cabral, Sidney Givigi
similarity 0.60
Abstract · 13 pages, 6 figures, 8 tables. Submitted to IEEE Transactions on Intelligent Vehicles

Vehicles that lose control at the handling limit through icing, hydroplaning, or an abrupt evasive maneuver fall outside the operating envelope of production safety systems such as electronic stability control, which focus on preventing instability rather than recovering from it. Expert drivers regain authority in these conditions by drifting. Existing autonomous recovery approaches are validated on idealized scenarios, define "recovered" states empirically and inconsistently, or rely on offline-planned trajectories rather than acting online. We address these gaps by first training a racing policy with reinforcement learning that learns drifting as a time-optimal maneuver, then adapting it to recovery through continued training with a minimum-time reward. We define recovery relative to a phase-plane-grounded stable equilibrium and introduce Gym-Khana for controller training and evaluation. Across 294 initial loss-of-control states, the transferred policy improves recovery by 186.8% over a Stanley path tracker and outperforms both a nonlinear model predictive controller and a recovery-only policy trained from scratch, while also recovering faster on states the baseline can already handle. An ablation shows that racing pretraining, rather than broader initial-state exposure alone, drives this gain. Deployed on a physical 1:10-scale F1TENTH vehicle using system identification, actuator-lag modelling, and domain randomization, the transferred policy outperforms Stanley on every tested loss-of-control state, including recovering 50% of the time from a hard state the baseline never recovers from.

0.12

Sideslip-Conditioned Drift Trajectory Planning with Flow Matching and Control Barrier Functions

cs.RO ·2026-11-17 ·Seokjun Lee, Seung-Hyun Kong
similarity 0.58
Abstract · 8 pages, 4 figures, 3 tables. Under review. Demonstration video: https://youtu.be/nskukDD1MFg

Drifting, the deliberate control of a vehicle at large sideslip angles, is relevant to both motorsport and recovery from unexpected oversteer. Existing autonomous drifting methods typically determine drift intensity through predefined reference trajectories, optimization objectives, or learned policy rewards, rather than accepting a desired sideslip angle as an explicit input. We propose, to the best of our knowledge, the first generative drift trajectory planner explicitly conditioned on a requested peak sideslip angle. A conditional flow matching model is trained on demonstrated drift laps with hindsight-derived sideslip labels and refined through reinforcement fine-tuning. A control barrier function (CBF) correction is then applied to satisfy model-based road, tire friction, and actuator constraints at the planning waypoints. In closed-loop experiments in the racing simulator Assetto Corsa, a nonlinear model predictive controller tracks the generated plans for six requested sideslip angles from 20 deg to 45 deg, with 30 laps (approximately 75 km) per request. The median peak sideslip angle measured across drift-corner passes follows the requested angle, with a mean absolute error of 1.2 deg across the six conditions. Ablation experiments show that reinforcement fine-tuning improves conditioning accuracy, while CBF correction substantially reduces off-road and spin events.

0.43

Slip-Induced Fall Suppression During Cornering for a Remotely Operated Motorcycle with a Rear-Wheel-Swing Mechanism

cs.RO eess.SY ·2026-10-15 ·Tadashi Sumioka, Kazushi Akimoto, Takuya Tsujimura, Sho Takayanagi, Kineo Tomura
similarity 0.58
Abstract · Journal papaer, 12 pages, 13 figures

Slip-induced falls when riding motorcycles are difficult to avoid even for expert riders and represent a major cause of single-vehicle accidents. Despite their prevalence, no practical solution has yet been proposed to suppress this phenomenon. We previously introduced a motorcycle model applicable to systems with both front- and rear- wheel steering. In this paper, we extend that model and formulate the suppression of slip-induced falls as an optimization problem that distributes assistive control inputs according to vehicle speed and road surface conditions. To evaluate the proposed method, we developed a remotely operated motorcycle and conducted experiments under two scenarios: slalom driving on a low-friction surface at 5.5 m/s, and turning maneuvers on synthetic ice to simulate driving over manholes on rainy days. The results demonstrate that our approach successfully suppresses falls under these challenging conditions.

0.25

Mission Performance: Automatic and Adaptive Race Pace Progression for Autonomous Racing

cs.RO cs.SEeess.SY ·2026-09-10 ·Giovanni Lambertini, Matteo Pini, Nicola Musiu, Ayoub Raji, Francesco Iacovacci +1 more
published similarity 0.58
Abstract · Accepted to the 2026 IEEE International Conference on Intelligent Transportation Systems (ITSC 2026)

In this paper, we describe the Mission Performance module implemented for a fully autonomous racing car to automatically manage the longitudinal, lateral, and combined performances, aiming to speedup the laptime progression while assuring safety. Motivated by the difficulty and risks of applying the real-time estimation of the grip to critical modules like the motion planner and controller, the Mission Performance guides these modules adapting their target performance instead of changing the vehicle model parameters. The module is formed by pre-defined progressions to warm up the tires at the beginning of a run. Then, the system continuously monitors safety and vehicle dynamics metrics on a per-sector basis to adaptively reduce, maintain, or increase the performance levels for each sector, progressively converging toward the maximum allowed value. The solution's effectiveness is demonstrated on the EAV-25, a fully autonomous Dallara Superformula, at the Yas Marina Circuit during the Abu Dhabi Autonomous Racing League (A2RL) Season 2.

0.35

Verifying Autoware Controller Node by Combining Model Verification and Runtime Monitoring

cs.SE ·2026-10-11 ·Daisuke Ishii
publishedcode/data similarity 0.58
Abstract · 34 pages, 9 figures, 2 tables. Extended version of a paper accepted at SEFM 2026

Formal modeling and verification of autonomous driving systems remain challenging due to the vast operational space and the complexity of the control logic. We propose a hybrid verification approach that combines formal model verification and runtime monitoring for the trajectory-following control node of Autoware, an open-source autonomous driving platform. We formalize the controller as a hybrid system in differential dynamic logic (dL), and introduce an abstract model that captures the essential control dynamics. We then prove safety and liveness properties of the model using the KeYmaera X proof assistant. Complementarily, we monitor the constraints that assure the compatibility between the model and the Autoware implementation across numerical simulation runs using the Autoware toolchain, quantifying to what extent the implementation's behavior is subsumed by the verified model. The experimental results confirmed that (i) monitoring provides a sound evaluation of target following with accuracy bounds, and (ii) the Autoware implementation reaches the target with an accuracy of approximately 0.2-0.4 (m) in position and 0.8 (m/s) in velocity.

0.45

Online Constraint Optimization-Based Indirect-Adaptive Robust Control for Autonomous Vehicles with Unknown Friction

eess.SY cs.RO ·2026-10-15 ·Yupeng Zhou, I-Chia Chang, Ziran Wang, Bin Yao
code/data similarity 0.58
Abstract

Friction uncertainty is a significant challenge for autonomous vehicle control, undermining feasibility and performance. This paper proposes a novel two-layer control framework to achieve vehicle motion control under large friction uncertainty by combining optimization-based planning with indirect adaptive robust control (IARC). The upper layer solves a constrained optimal control problem to generate a feasible trajectory that satisfies all the constraints in a time-optimal manner along the desired path. The lower layer, IARC, adapts the unknown parameters related to friction uncertainty and combines model compensation with robust feedback to ensure transient and steady-state tracking performance. An estimation monitor is designed to prevent poor learning when data indicate a model mismatch, while a smooth parameter reset reduces the estimated tire capacity and limits abrupt tightening of constraints. The updated parameters are fed back into the model and constraints in the planner, enabling trajectory replanning as friction conditions change. Simulation results indicate that the proposed method achieves accurate tracking of the desired trajectory and online friction adaptation under large friction uncertainty while ensuring time-optimal vehicle motion. The simulation results demos are available at https://github.com/TedZhou0603/CO-IARC.

0.27

SceneFactory-3D: Lifting 2D Traffic Scenes into 3D Physical Counterfactuals for Scalable Physically Grounded Safety Evaluation

cs.RO cs.MA ·2026-10-02 ·Yicheng Zhu, Linfeng Tian, Tianmu Zhao, Yang Chen, Fan Zuo +2 more
code/data similarity 0.57
Abstract

Scalable driving simulators typically execute vehicle commands using prescribed behavioral or kinematic rules, overlooking the physics of tire-road interfaces, thereby limiting their ability to capture how adverse road and environmental conditions alter vehicle execution and propagate through traffic. To address this limitation, we present SceneFactory-3D, a GPU-batched, physics-grounded multi-agent driving simulator. Vehicles execute acceleration and steering commands via suspension- and friction-limited forces evaluated at each wheel-contact point. Spatially varying friction, per-world 3D heightfields, gravity, and rigid contact consistently govern wheel motion and chassis collisions. Per-world terrain isolation and GPU batching enable SceneFactory-3D to run matched physical counterfactuals in parallel: traffic scenario setup and vehicle controllers remain fixed while only the road condition changes, enabling the resulting closed-loop effects to be evaluated across parallel worlds. To demonstrate the advantage of the SceneFactory-3D-enabled counterfactual evaluation, we conduct an empirical study on vehicle controllers' sensitivity to road conditions. We study three learned-policy families on 1,024 matched 12-vehicle worlds per condition, and two classical planners on a shared 32-world subset, across 21 friction and grade conditions. When friction drops from 1.0 to 0.18, the share of vehicles that clear the work zone safely falls by 6 to 90 percentage points across learned policies (18-19 for classical planners), and near-collision situations become more frequent for every learned policy. Code: https://github.com/SmallWorldLab/SceneFactory_3D

0.32

Safe Platooning under Input Constraints with Link-Wise Velocity String Stability

eess.SY ·2026-10-29 ·Panagiotis S. Trakas, Charalampos P. Bechlioulis, Thomas Berger
theory similarity 0.57
Abstract

We propose a decentralized controller for vehicle platoons with different braking and propulsion limits. The method uses only local distance and velocity measurements and requires neither online optimization nor exact vehicle parameters. The design combines a braking-distance safety margin with an adaptive funnel that relaxes the spacing requirement during propulsion saturation. A standstill mechanism prevents backward motion and supports stop-and-go operation. Under explicit uniform conditions on the vehicle parameters, controller settings, and initial states, we prove that closed-loop solutions exist for all time, collisions are avoided, and input limits are satisfied. Moreover, each follower tracks its predecessor's velocity range with gain one, up to an explicit additive offset determined by the funnel width and the braking-distance term. This bound establishes link-wise velocity string stability. Both the offset and the bounds on speeds and spacing errors are independent of vehicle index and platoon length. Simulations with 2 to 100 followers illustrate safety and bounded velocity deviations under disturbances and actuator limits.

0.18