CS Paper Radar

Online Constraint Optimization-Based Indirect-Adaptive Robust Control for Autonomous Vehicles with Unknown Friction

Yupeng Zhou, I-Chia Chang, Ziran Wang, Bin Yao

eess.SY cs.RO ·submitted 2026-10-15 21:43 UTC · v1
code/data

Abstract

Friction uncertainty is a significant challenge for autonomous vehicle control, undermining feasibility and performance. This paper proposes a novel two-layer control framework to achieve vehicle motion control under large friction uncertainty by combining optimization-based planning with indirect adaptive robust control (IARC). The upper layer solves a constrained optimal control problem to generate a feasible trajectory that satisfies all the constraints in a time-optimal manner along the desired path. The lower layer, IARC, adapts the unknown parameters related to friction uncertainty and combines model compensation with robust feedback to ensure transient and steady-state tracking performance. An estimation monitor is designed to prevent poor learning when data indicate a model mismatch, while a smooth parameter reset reduces the estimated tire capacity and limits abrupt tightening of constraints. The updated parameters are fed back into the model and constraints in the planner, enabling trajectory replanning as friction conditions change. Simulation results indicate that the proposed method achieves accurate tracking of the desired trajectory and online friction adaptation under large friction uncertainty while ensuring time-optimal vehicle motion. The simulation results demos are available at https://github.com/TedZhou0603/CO-IARC.

Closest papers

Nearest neighbours by meaning across the whole index.

A Differentiable Chassis Safety Layer for Intelligent Vehicle Motion Control

cs.RO ·2026-10-24 ·Lu Xiong, Xuge Hu, Yufei Song, Weidong Liu, Chen Tang
similarity 0.66
Abstract

Learning-based vehicle motion control requires coordination between diverse task objectives and state-dependent chassis safety constraints. Conventional cascaded architectures may compromise task performance when safety filters modify nominal commands independently of policy learning. This article proposes a differentiable chassis safety layer that modularly integrates task-oriented control with explicit physical constraints. Actuator limits, individual-tire force constraints, and vehicle handling envelopes are incorporated into sequential quadratic programs. Each projected command propagates the predicted vehicle dynamics and updates subsequent constraints, enabling temporal gradient coupling through implicit differentiation. A two-stage learning strategy combines expert imitation with risk-guided supervision and conditional intervention guidance to coordinate nominal control decisions with chassis safety constraints. Closed-loop evaluations under unseen scenarios, emergency maneuvers, and ablation studies demonstrate that the proposed method improves safety-performance coordination and exploits vehicle dynamic potential while maintaining handling stability.

0.23

Control-Informed Constraint Adaptation in Minimum-Time Trajectory Planning for Autonomous Racing

cs.RO ·2026-08-14 ·Ann-Kathrin Schwehn, Alexander Langmann, Mattia Piccinini, Johannes Betz
published similarity 0.65
Abstract · Accepted at IEEE ITSC 2026

Autonomous racecars operate at the limits of vehicle dynamics, where small control errors translate into safety-critical behavior and lost performance. Trajectory planners assume perfect tracking and remain blind to execution errors. To guarantee safety, trajectory planners therefore restrict themselves to conservative spatial margins, leaving usable track space untapped. To overcome these issues, we introduce a control-informed online trajectory planning framework that learns from its own execution errors. By measuring systematic tracking deviations during runtime, we dynamically adapt spatial track constraints and iteratively expand the free-space planning area. The planner remains time-optimal while compensating for accumulated execution errors. This method was analyzed in a high-fidelity closed-loop simulation environment with autonomous racecars. The results demonstrate that our approach reduces lap time by 1.8\,s without increasing computational burden, maintaining a median runtime of 25 ms. Our finding indicates that feeding control-induced deviations back into the planning layer unlocks performance previously inaccessible to modular architectures and enables autonomous vehicles to exploit track limits systematically.

0.19

Adaptive Model Predictive Control for Ground Vehicles: Review and Demonstrative Implementation

eess.SY ·2026-08-18 ·Chetana Gadgil, Mahendra Singh Tomar
similarity 0.64
Abstract · 16 pages, 4 figures, journal

This paper reviews Adaptive Model Predictive Control (AMPC) methods for Autonomous Vehicles (AVs), focusing on control strategies that dynamically adapt to uncertainties and changing conditions in real-time. The critical role of Adaptive Model Predictive Control (AMPC) in addressing the challenges of autonomous vehicle control are discussed. For the scope of this paper, AMPC is defined as a class of Model Predictive Control (MPC) techniques that modify the system model, cost function, constraints, or prediction horizon, based on real-time data. Traditional MPC, while effective for constrained optimization, struggles with model inaccuracies, computational demands, and dynamic environments, necessitating AMPC methods. The review covers existing literature on Gain scheduled MPC, Online Model Estimation MPC, Weight Adaptive MPC, Horizon Adaptive MPC, Learning Based MPC, and Hybrid MPC that combines MPC with other control methods. In addition to the survey, a demonstrative simulation of an adaptive MPC controller is presented that illustrates practical aspects of weight and speed adaptation in trajectory tracking.

0.29

Closed-Loop Refinement and Execution for Learned Driving Planners

eess.SY cs.RO ·2026-10-01 ·Huaijin Hu, Shanting Wang, Zhongyu Mo, Andreas A. Malikopoulos
similarity 0.64
Abstract · 8 pages, 6 figures, 3 tables. Submitted to the 2027 American Control Conference (ACC 2027)

Learning-based driving planners are usually trained and evaluated in open loop against logged trajectories. In closed loop, a trajectory with small displacement error can still stall the vehicle, steer it into a conflict with surrounding agents, or be executed with abrupt braking. We introduce Closed-Loop Refinement and Execution (CLRE), a hierarchical receding-horizon control framework designed to mitigate these failure modes while leaving the upstream planner frozen and adding no new learned model. The upper layer treats the nominal trajectory as a reference and solves a finite-horizon optimal control problem that trades route progress against interaction with predicted agents. Solving it from several initializations gives a candidate set, and a prediction-conditioned oriented-bounding-box (OBB) feasibility test retains only candidates whose minimum predicted OBB clearance over the horizon meets a threshold. The lower layer executes the lowest-cost survivor, or a route-centerline backup when none remains, through the tracking controller supplied with the planner, augmented by a range-based speed bound and a saturated proportional braking law. In closed-loop simulation on the 220-route Bench2Drive validation set with VAD as the upstream planner, CLRE raises the driving score from 42.26 to 55.89 and route completion from 55.69 to 71.51, and reduces collision events from 117 to 97.

0.23

LLA-MPC on Embedded Hardware: Rapid Adaptive Control with Thousands of Parallel Models

cs.RO eess.SY ·2026-10-02 ·Henry Z. Liao, Maitham F. AL-Sunni, John M. Dolan
publishedcode/data similarity 0.63
Abstract · This work has been accepted in the Sim2Real and Classical Control: From Rigorous Theory to Data-Driven Robotics Workshop at the 2026 IEEE/RS…

We present a generalized implementation of Look-Back and Look-Ahead Adaptive Model Predictive Control (LLA-MPC), a learning-free framework for real-time, rapid adaptive system identification and control. The original formulation was demonstrated only in simulation, for autonomous racing with a fixed model structure. Our implementation has modular dynamics and integrators, and we validate it on the F1TENTH platform under constrained computation and noisy state estimation. The system identifies tire parameters online by evaluating thousands of candidate models in real time on an embedded computer. Experiments with low-friction tires across changing surfaces show that LLA-MPC completes high-speed tracking tasks where a fixed nominal model fails. Code, videos, and our related work are available at: https://lla-control.github.io.

0.56

Beyond Planning: Differentiable Control-in-the-loop End-to-End Autonomous Driving

cs.RO ·2026-10-13 ·Zhidong Wang, Zirui Li, Zitong Shan, Zhiqi Mao, Qihang Huang +4 more
benchmark similarity 0.62
Abstract

End-to-end autonomous driving has achieved remarkable progress by planning trajectories directly from raw sensor data. Yet the step from planning to control still relies on hand-tuned tracking controllers that block the gradient path from vehicle motion back to the network. This gap stems from non-differentiable vehicle dynamics, aliased supervision from coarsely sampled expert labels, rate mismatch between high-rate control and low-rate re-planning, and vehicle model discrepancies between training and deployment. This paper proposes DIVA (Differentiable Identified Vehicle dynamics for end-to-end Autonomous driving) to close this gap. An identified actuator-level vehicle model is embedded in the training loop of the end-to-end driving network, forming a differentiable chain from perception to vehicle states. A learning-based control decoder replaces the external controller and is supervised on the rolled-out vehicle states, bypassing the aliased control-input labels. A rate-consistent control-input parameterization reconciles the heterogeneous sampling rates and enables asynchronous execution with a 3.8 ms control-only cycle. On-policy re-identification and an online disturbance observer address training-time distribution shift and deployment-time model mismatch respectively. On the closed-loop Bench2Drive benchmark, DIVA achieves a driving score of 86.7, surpassing the widely adopted state-of-the-art approach by 3.3 points while nearly halving mean jerk and reducing brake switching by 64%, and maintains superior path tracking accuracy under significant vehicle model mismatch at deployment.

0.18

Vehicle Drift Emergence: Continuous Evolution from Grip Driving to the Handling Limit via Boundary Exploration Learning Model Predictive Control

cs.RO ·2026-08-28 ·Sheng Zhao, Binh-Minh Nguyen, Hangyu Lu, Xiaodong Wu
similarity 0.62
Abstract

Automated drift controllers commonly track a prescribed drift equilibrium, sideslip reference, or trajectory. These formulations establish how to execute drift, whereas the continuous transition from grip driving to drift near the handling limit remains unresolved. This paper defines drift emergence in a repetitive lap time minimization task, where neither the controller objective nor the reward contains an explicit drift reference. A boundary exploration learning model predictive controller (BE-LMPC) constructs an empirical safe set and a locally shifted terminal cost from completed laps. By iteratively improving spatial speed allocation under a fixed global speed bound, the controller progressively explores larger sideslip and yaw rate envelopes while preserving recoverability. As lap performance improves, sustained sideslip and pronounced yaw motion emerge while the rear axle approaches saturation. Analysis shows that, when external conditions vary smoothly, the transition from tire adhesion to sliding does not itself cause abrupt changes in tire force or vehicle state. The combined-slip Fiala model satisfies this continuity condition at the transition. At a tire road friction coefficient of 0.6, lap time decreases from 49.95 s on Lap~3 to 25.50 s on Lap~12, with drift first emerging on Lap~11. Lap~12 reaches 16.5$^\circ$ sideslip and 0.894 rear axle utilization. In contrast, no drift is detected for friction coefficients from 0.8 to 1.2; at 1.2, a similar peak speed is achieved with only 0.483 rear axle utilization. These results characterize drift as a conditional continuation of limit handling that emerges when increasing performance demand approaches the available tire capacity, rather than as a separately prescribed motion mode.

0.32

Reinforced Iterative Learning Control for elastic joint arms: Guaranteed cross-trajectory generalization under model uncertainties

cs.RO ·2026-10-20 ·Yuri De Santis, Michele Pierallini, Franco Angelini, Manolo Garabini
published similarity 0.61
Abstract · Accepted for publication in Control Engineering Practice, 2026. 16 pages, 10 figures

Trajectory tracking for compliant robots is challenging due to nonlinear dynamics and modeling uncertainties, often requiring learning-based methods to avoid explicit parameter identification. Iterative Learning Control (ILC) ensures theoretically high precision and preserves the passive compliance of the robot. However, traditional ILC requires a separate learning phase for each new trajectory. Conversely, Reinforcement Learning (RL) generalizes to new trajectories, but practically suffers from high sample complexity and limited tracking precision. This work proposes Reinforced Iterative Learning Control (RILC) that combines the strengths of both approaches to achieve fast adaptation and guaranteed tracking convergence across diverse trajectories. By establishing a concurrent coupling between the two controllers, RILC overcomes the high initial errors and slow adaptation of traditional ILC, enabling high-performance tracking from the very first trials. In this architecture, ILC provides high-quality samples, while RL contributes as a generalizing best-effort policy across iterations. Additionally, a theoretical proof is presented to show that the RL component preserves ILC stability and, under specific conditions, can also reduce the error bound asymptotically. The efficacy of this framework is demonstrated through simulation and experiments on an underactuated 4-degree-of-freedom serial elastic robot using different trajectories and modeling mismatches.

0.39