CS Paper Radar

Reinforced Iterative Learning Control for elastic joint arms: Guaranteed cross-trajectory generalization under model uncertainties

Yuri De Santis, Michele Pierallini, Franco Angelini, Manolo Garabini

cs.RO ·submitted 2026-10-20 15:00 UTC · v1
published

Abstract

Trajectory tracking for compliant robots is challenging due to nonlinear dynamics and modeling uncertainties, often requiring learning-based methods to avoid explicit parameter identification. Iterative Learning Control (ILC) ensures theoretically high precision and preserves the passive compliance of the robot. However, traditional ILC requires a separate learning phase for each new trajectory. Conversely, Reinforcement Learning (RL) generalizes to new trajectories, but practically suffers from high sample complexity and limited tracking precision. This work proposes Reinforced Iterative Learning Control (RILC) that combines the strengths of both approaches to achieve fast adaptation and guaranteed tracking convergence across diverse trajectories. By establishing a concurrent coupling between the two controllers, RILC overcomes the high initial errors and slow adaptation of traditional ILC, enabling high-performance tracking from the very first trials. In this architecture, ILC provides high-quality samples, while RL contributes as a generalizing best-effort policy across iterations. Additionally, a theoretical proof is presented to show that the RL component preserves ILC stability and, under specific conditions, can also reduce the error bound asymptotically. The efficacy of this framework is demonstrated through simulation and experiments on an underactuated 4-degree-of-freedom serial elastic robot using different trajectories and modeling mismatches.

Comment
Accepted for publication in Control Engineering Practice, 2026. 16 pages, 10 figures
Journal ref
Control Engineering Practice, Volume 176, November 2026, 107166
DOI
10.1016/j.conengprac.2026.107166

Closest papers

Nearest neighbours by meaning across the whole index.

Differentiable Iterative Learning Control for Black-Box Position-Commanded Manipulators

cs.RO eess.SY ·2026-10-31 ·Mohammed Al-Ghaili, Yakoop Qasim, Hassan Almubarak
similarity 0.76
Abstract

High-accuracy repetitive tracking is challenging for position-commanded manipulators whose low-level controllers are inaccessible, while constrained model-based iterative learning control (ILC) can require substantial manual parameter tuning. We present Differentiable Iterative Learning Control (Diff-ILC), an online bilevel framework that adapts the parameters of a constrained ILC update between physical robot executions. A closed-loop differential model is identified once from paired smooth perturbations and subsequently kept fixed. At each trial, a constrained quadratic program computes a feasible command correction, while a real-anchored next-trial prediction defines a task-level objective. Hypergradients are obtained by implicitly differentiating the locally active KKT system, enabling multiple computational parameter updates without additional robot executions. Experiments on a 6-DoF DOBOT CR3 across unseen planar and three-dimensional trajectories show substantially faster physical-trial convergence than fixed-parameter model-based ILC. Across the four primary trajectories, after only two trial-to-trial updates, Diff-ILC achieves 78.8% and 76.4% lower mean joint-vector and Cartesian RMSE, respectively, than fixed-parameter model-based ILC.

0.19

Multi-CONDOR: Learning Multistable Motion Primitives from Demonstration

cs.RO cs.AI ·2026-11-16 ·Gabriele Giuseppe Di Marzo, Mariano Ramírez Montero, Maximilian Stölzle, Rodrigo Pérez-Dattari, Cosimo Della Santina
similarity 0.71
Abstract

Dynamical-system-based motion policies provide a framework for learning reactive robot motions with stability and convergence properties. Many manipulation tasks, however, admit several distinct goals or a continuous set of acceptable outcomes, requiring motion primitives that preserve these alternatives. Accommodating both goal structures within a unified framework with continuous, autonomous dynamics remains an open challenge. We propose a CONDOR-based framework, multi-CONDOR, for learning motion primitives with either multiple discrete attractors or a continuous attracting goal contour. The approach combines imitation learning with losses that encourage agreement between the learned task dynamics and latent reference systems encoding the desired attraction structure. We provide a Lyapunov-based analysis of the convergence properties of the learned motion dynamics. We evaluate the framework on simulated benchmarks with discrete goals, qualitative examples with continuous goal contours, and robotic grasping experiments. In simulation, multi-CONDOR reduces trajectory RMSE by approximately 72% compared with separately learned single-goal motion primitives selected by a state machine. For tasks with two and three goals, respectively, it reduces the fraction of evaluated initial states ending outside the goal tolerance from StableNODE's 0.31% and 7.29% to 0% in both settings. Experiments with a Franka Emika robot arm demonstrate successful grasping of a container by either of its two handles using motions learned from demonstrations. Together, these results show multi-CONDOR combines motion reproduction with the flexibility to converge to alternative valid outcomes.

0.26

Stability-aware Residual Reinforcement Learning Framework for Robotic Manipulator Disturbance Compensation

cs.RO ·2026-09-18 ·Jihong Kim, Joonhyuk Kwon, Hwa Soo Kim, TaeWon Seo, Hyung-Tae Seo
similarity 0.69
Abstract · 14 pages, 9 figures

Although conventional controllers and disturbance observers (DOBs) are the standard for precision tracking in manipulators, they suffer from parameter uncertainty, nonlinear friction, and compound disturbances. This study proposes a residual reinforcement learning DOB framework that pairs an analytical observer with an RL policy. The deterministic baseline operates within a reliable region, whereas the RL policy explicitly targets the residuals that the model cannot capture. To make this compensation disturbance-aware, an estimator network aligns the observation history with a privileged disturbance context, organizing the latent space by disturbance regime and enabling rapid adaptation across disturbance transitions. To guarantee stability, we derived and enforced a state-dependent action bound on the RL policy from an input-to-state stability (ISS) analysis such that the closed loop provably confines the tracking error to a certified envelope for arbitrary policy outputs. Experiments on a 6-DOF manipulator demonstrated consistent improvements in disturbance estimation and tracking, including a 27.8% tracking-error reduction on real hardware under zero-shot sim-to-real transfer and a 38.0% reduction under a base-vibration disturbance that was not observed during training.

0.24

Learning Accurate End-Effector Trajectory Tracking with Inertial Feedback for a Quadruped Manipulator

cs.RO ·2026-11-17 ·Dohyeon Kim, Seungyong Han, Yeongtae Jung
similarity 0.67
Abstract

Accurate end-effector trajectory tracking on quadruped manipulators is challenging because uncertainties in actuators, foot-ground contact, and geometric errors are propagated through the leg-arm kinematic chain. Detecting such errors requires sensing beyond joint encoders that can capture the effects of these uncertainties on the robot's motion, since joint encoders only provide measurements at the actuated joints and cannot fully observe mechanical errors such as backlash, dimensional inaccuracies, or structural deformation. This work addresses these challenges using a reinforcement learning framework with end-effector (EE) inertial feedback, targeting local high-accuracy manipulation while maintaining a nominal body pose and support configuration without intentional body motion or foot repositioning. The learned policy uses EE inertial measurements to compensate for tracking errors induced by uncertainties throughout the leg-arm system that cannot be fully inferred from proprioception alone. Simulation and real-world experiments on continuous EE trajectory tracking show overall improvements relative to nominal and proprioception-only baselines. In real-world experiments, the proposed policy reduces the MoCap-based RMSE by 17.3% and 28.0% relative to the nominal baseline under the two in-distribution (ID) command conditions, respectively, and by an additional 12.6% and 15.9% relative to the proprioception-only baseline. Furthermore, the trajectory-wise RMSE between FK-reconstructed and motion-capture-measured end-effector positions averaged 12.61+-2.15mm (mean+-standard deviation) across 24 controller-trajectory combinations, revealing a substantial discrepancy between nominal kinematic reconstruction and measured end-effector motion.

0.22

Beyond Terminal Constraints: Reliable Robot Control with Learned Safe Sets

cs.RO ·2026-11-04 ·Gianni Lunardi, Elias Fontanari, Matteo Saveriano, Andrea Del Prete
similarity 0.66
Abstract

Ensuring safety in advanced robot control methods such as Model Predictive Control (MPC) and Reinforcement Learning remains an open challenge. A common approach relies on control-invariant sets, yet their exact computation for nonlinear systems is generally intractable, and numerical approximations compromise theoretical guarantees. In this work, we show that safety does not need to rely exclusively on control invariance. We introduce novel classes of safe sets, each broader than classical control-invariant sets, and analyze corresponding MPC schemes that guarantee recursive feasibility by constraining different nodes of the prediction horizon rather than only the terminal state. Furthermore, when the safe set is an inner approximation of a suitable control-invariant set, our methods can ensure safety through a safe-abort strategy, even in the absence of recursive feasibility. We validate our approaches in extensive simulations on a 6-joint robot manipulator, showing fewer constraint violations than state-of-the-art methods while maintaining comparable tracking performance and computational efficiency. Hardware experiments further demonstrate the practicality of our schemes for real-world robotic applications.

0.13

Residual Deep Reinforcement Learning-Based Computed Torque Control for a Cable-Driven Lower-Limb Rehabilitation Robot under Disturbances and Parametric Uncertainties

cs.RO eess.SY ·2026-08-27 ·Mohammad-Hossein Fakouri, Ali Keymasi-Khalaji
similarity 0.66
Abstract · 32 pages, 24 figures, 13 tables. Preprint

Accurate trajectory tracking in cable-driven lower-limb rehabilitation robots is challenging because model uncertainty, external disturbances, joint constraints, and pull-only cable actuation can degrade nominal control performance. Conventional model-based controllers provide an interpretable control structure but remain sensitive to model mismatch, whereas fully learning-based control can reduce transparency and complicate constraint-aware operation. This study proposes a residual deep reinforcement learning-enhanced computed torque control framework in which computed torque control generates the nominal command and a bounded Deep Deterministic Policy Gradient policy supplies only an additional compensating torque. The approach is evaluated in simulation under nominal, uncertain, disturbed, combined, and generalization conditions, together with trajectory-tracking, joint-limit, cable-demand, workspace-feasibility, and cable-Jacobian diagnostics. Across the evaluated conditions, the residual controller improves tracking and disturbance rejection relative to computed torque control while preserving the interpretable model-based command structure and satisfying the reported feasibility checks in the representative evaluation. Broader tests indicate that tracking improvements can persist beyond the representative case while also exposing trajectory-dependent constraint limitations. These results support bounded residual learning as a practical robustness-enhancement strategy for simulation-based rehabilitation robot control and motivate further constraint-aware and experimental validation.

0.14

DKWBC: Decoupling Motion Tracking and Balancing for Humanoid Whole-Body Control

cs.RO ·2026-11-06 ·Dingkun Wei, Zehong Shen, Huaijin Pi, Xueyang Wang, Xing Zhu +3 more
code/data similarity 0.66
Abstract · 9 pages, 6 figures, 4 tables

Humanoid whole-body control requires a robot to track diverse reference motions while maintaining balance under gravity, torque limits, contact switching, and external disturbances. Existing reinforcement-learning-based trackers typically learn control outputs that jointly address motion tracking and balance. However, similar reference poses can correspond to substantially different dynamic demands, requiring a unified policy to learn motion-dependent control requirements alongside balance corrections. This can complicate learning and lead to high-frequency fluctuations in control outputs. We propose DKWBC, a dynamics-informed whole-body control framework that combines explicit model-based tracking with a learned balancing residual. Inspired by the model-based and environmental-wrench contributions to joint torques in floating-base dynamics, DKWBC uses inverse-dynamics feedforward and joint PD feedback to supply tracking torques, while a residual policy learns additional joint-torque corrections for balanced execution. By explicitly accounting for motion-dependent torque demands, this structure simplifies the policy's learning task. Experiments in simulation and on real hardware demonstrate that a single learned balancing policy generalizes across motion datasets while maintaining accurate motion tracking and balance across ground support, attached payloads, and physical interaction. Project page: https://robbyant-research.github.io/DKWBC/.

0.24

Residual Compliant Policy: Learning Compliant Policies from Few Demonstrations

cs.RO ·2026-10-01 ·Chunyu Jiang, Yichen Cai, Shuai Li, Wenbin Sun, João Carvalho +4 more
similarity 0.65
Abstract · 9 pages, 6 figures. Project website: https://residual-compliant-policy.github.io

Contact-rich manipulation requires a robot to be precise in free space to establish the intended contacts, and compliant once in contact to avoid excessive forces. Imitation learning has proven effective for simpler manipulation tasks, but the compliance underlying a demonstration is not directly observable and is therefore difficult to infer from demonstration data alone. We present a framework that makes compliance explicit at every stage. During data collection, the operator teleoperates the real robot while a synchronized digital twin visualizes the error between the commanded reference and the achieved pose, making the current compliance visible, and selects between two discrete compliance modes. To generalize across object poses, we combine Laplacian editing, which retargets trajectories efficiently but is not physics-consistent during contact, with simulation-based trajectory optimization, which enforces physical plausibility but offers no manual guidance. Finally, a residual reinforcement learning policy refines the interaction forces by adjusting the reference pose of the underlying admittance controller. We evaluate on three flipping and pushing tasks on a Franka FR3 based on a total of 7 demonstrations across tasks. Our method is successful on all 40 out-of-distribution trials, compared to 33/40 and 24/40 for two baselines, with our base policy alone reaching 35/40.

0.27